What are the space requirements for creation of a Oracle database.
Hi,
How much space do we require to create a database, say the data
size is 2GB.., is there any estimate like the space should be 3
times or 4 times of the data size..?
Regards,
G. Rajakumar.
It really depends on how you set up your tables. Storage
parameters, block size, etc etc.
Similar Messages
-
What are the versions required for JBOSS,JDK and ORACLE to setup the ATG 10.2.
Hi Folks,
Could you please share, What are the versions required for JBOSS, JDK and ORACLE to setup the ATG 10.2.
Thank you.In case you don't have access to MOS :
JBOSS : 5.1.2 EAP
JDK : 1.6.0_38
ORACLE :
Oracle Exadata5
Oracle 10gR2 (10.2.0.3)
Oracle 10gR2 RAC (10.2.0.3)
Oracle 11gR2 (11.2.0.2.0)
Oracle 11gR2 RAC (11.2.0.2.0) -
What are the privileges required for explain plan in Oracle 11g database
I am facing the problem in doing a explain plan for a view in Oracle 11g database. When I select from the view like this:
select * from zonewisearpu
It does a select on the view but when I give explain plan like
explain plan for
select * from zonewisearpu
I get the error like insufficient privileges.
Please let me know if things are getting missed out as I guess system level privileges are required to execute this.
I hope, my question is clear.
It’s a humble request to revert urgently if possible as I need to complete a task and do not know the way out.
Regards975148 wrote:
Thanks for your reply. I have found out that an explain plan is possible on the user's own objects and is not possible on the granted objects from a different schema. For eg, if I do a explain plan on a view querying on tables from a different view, it would not allow the explain plan to proceed. This could mean that explain plan needs different privileges than just a select.
Requesting for a revert to this.
Here is a simple test case that I have perfomed
SQL> create user test1 identified by test1;
User created.
SQL> create user test2 identified by test1;
User created.
SQL> grant connect, resource to test1,test2;
Grant succeeded.
SQL> create table test1.tab1 as select * from v$session;
Table created.
SQL> connect test2/test1
Conencted.
SQL> show user
USER is "TEST2"
SQL>
SQL> explain plan for
2 select sid,serial#,status,username from test1.tab1 where username<> '';
Explained.
SQL>
So, as can be seen I am able to do a explain plan from user test2 for tables belong to user test1.
As far as privileges are concerned, following is the list
SQL> select * from dba_role_privs where grantee in ('TEST1','TEST2') order by 1;
GRANTEE GRANTED_ROLE ADM DEF
TEST1 CONNECT NO YES
TEST1 RESOURCE NO YES
TEST2 CONNECT NO YES
TEST2 RESOURCE NO YES
SQL>
SQL> select grantee,owner,table_name,privilege from dba_tab_privs where grantee in ('TEST1','TEST2') order by 1;
GRANTEE OWNER TABLE_NAME PRIVILEGE
TEST2 TEST1 TAB1 SELECT
SQL>
SQL> select * from dba_sys_privs where grantee in ('TEST1','TEST2') order by 1;
GRANTEE PRIVILEGE ADM
TEST1 UNLIMITED TABLESPACE NO
TEST2 UNLIMITED TABLESPACE NO
SQL> -
What are the settings required for QM in procurement
Hi Team,
What are the settings required for QM in procurement. I have set indicator for QM in procurement in QM view in material master.
I am not clear about following fields to be maintained in QM view.
QM Control Key
Certificate type
Target QM system
Tech. delivery terms Indicator.
Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
ThanksHi,
All meaning are
QM Control Key :
If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
Certificate type :
Certificate types applies to the Certificate processing in procurement & Certificate creation
Target QM system :
whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
- If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
- If you want Vendor's perticular certificate for Material then you have to define Certificate type.
Also, you have to maintain Material, Vendor's Info record at plant level.
Thanks,
JM -
FAQ: What are the system requirements for GroupPix?
FAQ: What are the system requirements for GroupPix?
Answer:
iOS: minimum iOS version is 6.0 GroupPix 1.x runs on iPhone 4, 4s, iPhone 5, or iPod touch (5th generation or later)
Android: minimum OS version 4.0 GroupPix 1.x is designed for Android phones
Message was edited by: Pattie F 11/7/13For Mac:
http://support.apple.com/kb/SP663
Software:
Mac OS X version 10.6.8 or later (intel-based hardware)
400MB of available disk space
iTunes in the Cloud and iTunes Match availability may vary by country.
Hardware:
Mac computer with an Intel Core processor and 512MB of RAM
To play 720p HD video, an iTunes LP, or iTunes Extras, a 2.0GHz Intel Core 2 Duo or faster processor and 1GB of RAM is required.
To play 1080p HD video, a 2.4GHz Intel Core 2 Duo or faster processor and 2GB of RAM is required.
Screen resolution of 1024x768 or greater; 1280x800 or greater is required to play an iTunes LP or iTunes Extras
Broadband Internet connection to use the iTunes Store
Apple combo drive or SuperDrive to create audio, MP3, or back-up CDs; some non-Apple CD-RW recorders may also work
Apple SuperDrive to back up your library to DVDs; some non-Apple DVD-RW drives may also work.
You can run OS X 10.6.8 in an Intel-based MacBook w/ first model, in retail DVD.
But it won't work in a power-pc architecture Mac... see specifications:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Hopefully this helps.
Good luck & happy computing! -
What are the system requirements for downloading Itunes?
What are the system requirements for downloading Itunes?
When I go to http://www.apple.com/itunes/download/ it is not an option to download Itunes. The box is grayed out and I can not click on it!Windows System Requirements
PC with a 1GHz Intel or AMD processor and 512MB of RAM
Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
400MB of available disk space
Broadband Internet connection to use the iTunes Store
Macintosh System Requirements
Mac computer with an Intel Core processor
OS X version 10.6.8 or later
400MB of available disk space
Broadband Internet connection to use the iTunes Store
Also, just let the page load a bit. It may become available once the page loads. -
What are the system requirements for apple itunes 11.1?
what are the system requirements for apple itunes 11.1?
For Mac:
http://support.apple.com/kb/SP663
Software:
Mac OS X version 10.6.8 or later (intel-based hardware)
400MB of available disk space
iTunes in the Cloud and iTunes Match availability may vary by country.
Hardware:
Mac computer with an Intel Core processor and 512MB of RAM
To play 720p HD video, an iTunes LP, or iTunes Extras, a 2.0GHz Intel Core 2 Duo or faster processor and 1GB of RAM is required.
To play 1080p HD video, a 2.4GHz Intel Core 2 Duo or faster processor and 2GB of RAM is required.
Screen resolution of 1024x768 or greater; 1280x800 or greater is required to play an iTunes LP or iTunes Extras
Broadband Internet connection to use the iTunes Store
Apple combo drive or SuperDrive to create audio, MP3, or back-up CDs; some non-Apple CD-RW recorders may also work
Apple SuperDrive to back up your library to DVDs; some non-Apple DVD-RW drives may also work.
You can run OS X 10.6.8 in an Intel-based MacBook w/ first model, in retail DVD.
But it won't work in a power-pc architecture Mac... see specifications:
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
Hopefully this helps.
Good luck & happy computing! -
What are the Things required for BI 7.0 Implementation project
Hi Friends,
Can any one suggest me
1.What are the Things required for BI 7.0 Implementation project?
2.System Configurations & Hardware Components?
3. Any additional steps...
plz suggest me.
RegardsHi lakshmi,
http://csc-studentweb.lrc.edu/swp/Berg/articles/PM_2006_upgrade_NW2004s_Bjarne_Berg_v12.ppt#426,3,Why Upgrade u2013 end of supportu2026
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d163a7-0301-0010-d9b0-98f692ea3c60
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
https://wiki.sdn.sap.com/wiki/x/JYk
Check the following links.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
check the following
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm -
What are the infotypes required for maintaining benefits....
Hi
Please help ...
What are the ingotypes required for maintaing benefits....Hi Srikanth,
Please find below the list of Infotypes required for maintaining benefits:
1. General Benefits Information (Infotype 0171)
2. Adjustment Reasons (Infotype 0378)
3. Health Plans (Infotype 0167)
4. Insurance Plans (Infotype 0168)
5. Savings Plans (Infotype 0169)
6. Flexible Spending Account (Infotype 0170)
7. Miscellaneous Plans (Infotype 0377)
8. Family/Related Person (Infotype 0021)
There are also other benefits infotypes e.g. Stock Purchase Plans (Infotype 0379), Credit Plans (Infotype 0236) and many COBRA and retirement plan infotypes but these are used based on the company requirement.
I hope this helps.
Regards,
Anand Jalan
Edited by: Anand Jalan on Jan 6, 2010 9:50 PM
Edited by: Anand Jalan on Jan 6, 2010 9:52 PM -
What are the jars required for prepare portlet tool?
what are the jars required for prepare portlet tool which converts portlets to .portlet.
HI
you will have to create manager as portal role and assigned to them necessary worksets containing necessary worksets look into the PCD in migrated content and line *?? folder you will have necessary ESS and Mss packages. and all configs is related to iviews system properties and transactions and applications you need to do it .please do not forget to give points
with regards
subrato kundu -
What are the roles required for MSS
What are the roles required for MSS in R/3.
I have created ESS roles. But need to find for MSS.
I am able to see the PERNR in ESS on portal which created in R/3.
I need to get my staff on portal.
What config is required for this.
MSS User.HI
you will have to create manager as portal role and assigned to them necessary worksets containing necessary worksets look into the PCD in migrated content and line *?? folder you will have necessary ESS and Mss packages. and all configs is related to iviews system properties and transactions and applications you need to do it .please do not forget to give points
with regards
subrato kundu -
Hi All,
What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
Client Type
Port range and Protocol required for Audio
Port range and Protocol required for
Video
Port range and Protocol required for
A/Vconferencing
Windows Desktop Client
Windows mobile App
Iphone
Ipad
Andriod phone
Andriod Tablet
MAC desktop client
Please advise. Many Thanks.Out of the box, 1024-65535 for all of the client ports. :)
https://technet.microsoft.com/en-us/library/gg398833.aspx
You'll want to tune your client ports a bit
https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings. I'm not sure the mobile clients respect that setting.
Elan's got the best writeup for Windows clients here:
http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
However, the marking of the packets is the tricky part. Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings. You have to do it based on ports
as the traffic could be peer to peer.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
What are the system requirements for iMac for Photoshop CS6?
What are the system requirements for iMac for Photoshop CS6?
Just installed it and get a message saying it doesn't work on "this type of Mac".
I have an iMac a few years old.....and Dual Core.System requirements | Photoshop
-
What are the network requirements for the Remote Panel Server?
What are the network requirements for the Remote Panel Server?
I've been trying for a while now to setup a Remote Panel. I can connect to my computers remote panel from other computers on my LAN but nowhere else.
When ever I use the web publishing tool it gives me a URL in this format: http://Computer-Name.Corporate-Name.local:8086/VI-Name.html Apparently this means I have a local DNS server and this URL has no meaning from the public.
When I try connecting with the Operate>>Connect to Remote Panel..., I get this error message:
"Connecting to remote panel server...
Remote panel connection refused by specified server: Make sure LabVIEW Web Server is enabled on specified server"
I got the same error when I tried to host a remote panel from my laptop at home, on my Wi-Fi. Is there some network or firewall setting I'm not seting? Could it be my server or router or private network?
My goal is to be able to host Remote Panels from my laptop while I am travailing internationally, by using 4G mobile internet. Is that even passable?
Solved!
Go to Solution.Over_Nyquest
Have you enabled the Remote Panel Server in the Web Server options on the server?
Kyle B | Product Support Engineer | ni.com/support -
What are the specific requirements for scalability?
Hi
what are the specific requirements for scalability?
for a share point internet portal
adilHi Adil,
According to your description, my understanding is that you need to know about SharePoint Scalability.
For your issue, please have a look at the blog:
http://technet.microsoft.com/en-us/library/cc262787(v=office.15).aspx
https://www.linkedin.com/today/post/article/20140610232851-17468776-scalability-planning-in-your-sharepoint-2013-office-365-roadmap
http://www.slideshare.net/garthluke/effective-sharepoint-scalability-management-to-blob-or-not-to-blob-thats-the-question
http://download.microsoft.com/download/7/F/0/7F069D0B-B6BD-4692-868B-E8555BB72445/LargeScaleDocRepositoryCapacityPlanningDoc.docx
Best Regards,
Eric
Eric Tao
TechNet Community Support
Maybe you are looking for
-
What is the best way to move an aperture library from one full drive to an external drive?
Just want to make sure I move my existing Aperture library on my internal drive (which is full) correctly to an external drive that has plenty of space. Thanks for the help!
-
Safari 5.1.7 crashes randomly
Since a few days Safari keeps crashing randomly on my MBP. It will work for a few minutes after starting, then it will freeze, eventually coming back to life for a few seconds only to freeze up completely in the end. Only thing helping is a force qui
-
Problems attaching scanned jpg images to mail messages
We are having issues attaching scanned images from a Epson SX600FW all in one printer/scanner/fax machine into mail on my dad's MacBook. Basically if I attach a jpeg from any other source (internet or digital camera) to a message, they attach ok but
-
Since the update the triggers on my site do not work, desperate for help, will a new muse be issued?
-
Solaris 10g RAC Clusterware Raw device dd comand block size, sizing
Hi We are in the process of installing clusterware for RAc on solaris 10. I have 4 luns 500mb each, we want to use them for the voting disks and ocr, 1. Which one do we use /dev/dsk or /dev/rdsk? 2) Also how do you erase the data to clear them out, I