What are the special conversions for time in update rules?

What are the special conversions for time in update rules?

Hello,
Special conversions for time in update rules are automatically conversion rules.
Example: If the cube contains calendar month and your transfer structure contains date, the date to month is converted automatically.
Assign points if this helps,
Regards,
Jorge Diogo

Similar Messages

  • What are the content conversion parameters for this structure

    Hi All,
    The below file is the text file. what are the content conversion parameters are required and what is the structure to create in the IR to convert into xml.
    Schedule D - District/Port List (by District Code) [Produced13APR11]
    District |    Port      |    Name
    Code     |    Code      |
    01       |              |    PORTLAND, ME
             |    0101      |    PORTLAND, ME
             |    0102      |    BANGOR, ME
             |    0103      |    EASTPORT, ME
             |    0104      |    JACKMAN, ME
             |    0105      |    VANCEBORO, ME
             |    0106      |    HOULTON, ME
             |    0107      |    FORT FAIRFIELD, ME
             |    0108      |    VAN BUREN, ME
             |    0109      |    MADAWASKA, ME
             |    0110      |    FORT KENT, ME
             |    0111      |    BATH, ME
             |    0112      |    BAR HARBOR, ME
             |    0115      |    CALAIS, ME
             |    0118      |    LIMESTONE, ME
             |    0121      |    ROCKLAND, ME
             |    0122      |    JONESPORT, ME
             |    0127      |    BRIDGEWATER, ME
             |    0131      |    PORTSMOUTH, NH
             |    0132      |    BELFAST, ME
             |    0152      |    SEARSPORT, ME
             |    0181      |    LEBANON AIRPORT
             |    0182      |    MANCHESTER USER FEE AIRPORT, NH
    02       |              |    ST. ALBANS, VT
             |    0201      |    ST. ALBANS, VT
             |    0203      |    RICHFORD, VT
             |    0206      |    BEECHER FALLS, VT
             |    0207      |    BURLINGTON, VT
             |    0209      |    DERBY LINE, VT
             |    0211      |    NORTON, VT
             |    0212      |    HIGHGATE SPRINGS/ALBURG

    since in this case you dont seem to have a key value to figure out what your header is, it is better to go for a two level mapping. i.e first read all the data - each line as an xml tag. and in the first mapping group it as required and then use it for your original mapping.
    Regards,
    Ninu

  • What are the ideal specs for a DigiBeta master tape when authoring a "widescreen anamorphic" 16:9 SD DVD (original aspect ratio is 14:9)?

    I just received the masters for a new SD DVD. I would like to author a "widescreen anamorphic" SD DVD horizontally squeezed widescreen image stored in a standard 4:3 aspect ratio DVD image frame. (On 4:3 displays, mattes should preserve the original aspect ratio. On 16:9 displays the image will fill the screen at the highest possible resolution.)
    Below I've listed the specs of the Digi Beta master tapes the producers have sent to me for digitizing. I'd like to know this: What are the ideal specs for a DigiBeta master tape when authoring a widescreen anamorphic SD DVD, using material with an original aspect ratio of 14:9?
    I've also listed my guesses below. Please let me know if my guesses are right. If not, please suggest alternatives (and if possible explain why.)
    TECHNICAL SPECIFICATIONS OF EXISTING MASTER:
    Tape: DigiBeta
    Original Aspect Ratio: 1.55 (14:9)
    Vid Rate: 29.97 fps
    Pixel Aspect: NTSC - CCIR 601
    Frame Size: 720 x 480
    Anamorphic: Full-Height Anamorphic (16:9 image displayed in letterboxed, non-distored 4:3)
    Display Format: 4:3 Letterbox
    MY GUESS AT IDEAL TECHNICAL SPECIFICATIONS (for a DigiBeta, that is):
    Tape: DigiBeta
    Original Aspect Ratio: 1.55 (14:9)
    Vid Rate: 29.97 fps
    Pixel Aspect: Square
    Frame Size: 720 x 540
    Anamorphic: YES
    Display Format: 16:9 Anamorphic (horizontally squeezed widescreen image)
    Please feel free to ask for clarification or further information you need to answer my question.
    Thank you so much in advance for your help!
    Best, Noetical.
    BTW, I can't wait for the day when everything has gone digital and we get digital intermediates instead of tapes to digitize!

    Hi Nick...thanks for taking the time to reply to my question.
    Nick Holmes wrote:
    What you have there is a mess.
    NTSC pixels are never square.
    NTSC is 720x486, even when it is Anamorphic.
    You shouldn't be using an already letterboxed master to make an Anamorphic version. Get the master that was made before the letterboxing stage.
    When you make an Anamorphic DVD it should display as 16:9 full screen automatically on widescreen TVs.
    The same DVD will automatically letterbox on 4:3 TVs.
    Um yeah...duh. That's exactly what I was trying to explain in the preface of my question. I'm sorry if I didn't make it clear...all these things you mention are the reasons I'm putting together a list of the technical specs of the DigiBeta I need so I can have them send that instead of the stupid letterboxed version. 
    Look, I'm sending this request to some intern at their offices in England, asking for a master with which I can make an Anamorphic DVD. They already sent me this master, which as you and I both agree is an idiotic asset to use for these purposes. As such, I was hoping for advice on a more precise way of requesting the master that I need than asking for "the master that was made before the letterboxing stage." Upon reflection, perhaps I'll just do that. If you or anyone else has a suggestion about something I should add to my request that would improve the odds of them sending the tape I need, please repond. Thank you!
    BTW, It's been a long time since anyone has responded to something I've written or said as though I'm an idiot. I remember now that I don't really like it. (Moving along...)

  • How to find out what are the interfaces used for Job and Job Codes

    HI All,
    I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
    Thanks In Advance
    Sunny

    Hi,
    Here is an idea for your request.
    Basically you can create a simple query on multiprovider 0TCT_MC01.
    Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
    Choose following characters into your objects:
    InfoProvider ( 0TCTIFPROV )  - you can create a variable for choosing infoprovider before query runs.
    *Tp.[Type of BI Application Object] 0TCTBISOTYP  = filter this with 'QUERY' or whatever your need is.
    *BI Application Object 0TCTBISBOBJ,  ( this will give you the name of the queries)
    In key figures choose,  Count for BI Appl. (0TCTWTCOUNT).
    (number for query run)
    Create a condition , for top 20.
    Hope this helps.
    Derya

  • What are the optimal values for mac and arp timeout values

    Hi Guys.
    What are the best values for "mac address-table aging-time" and "arp timeout" by following scenarios?:
    - single sg300-10 as layer3-switch with a maximum of 10 local (direct connected) hosts
    - and a 3750x-stack with 100 local hosts + hsrp with a other stack of the same sort
    or for asa 5520 as internet gateway for 500 clients?
    I use at the moment a mac aging-time from 300 seconds and a arp timeout from 3600 seconds.
    Is this o.k.?
    Thanks.

    Marvel.
    As far as enhancing the CLI, it will of course be enhanced when new firmware releases provide new features. As far as making it more IOS-like, best to my knowledge, no.  The only other supported CLI on the SB switches are on the SX500 series and SX200E series which the CLI are all consistent. If you bought a SX500 series the commands are nearly identical minus the different feature sets.
    -Tom
    Please mark answered for helpful posts

  • What are the required settings for Quality Certificate

    Hi Team
    What are the required settings for Quality Certificate for Raw material from vendor. This is my RR - Result Recording  for inspection lot.
    Please sugget me T-Code to view this.
    Can I see say for 6-9 months RR done insp. lot.
    Thanks

    Settings for Quality Certificate for Raw material from vendor,
    Activate QM Procurement key, enter qm control key with certificate and Enter certificate type in certificate field.
    There are 2 cases,
    u want details of certificate send by vendor
    u want to record results and see inspection lot wise results.
    case1
    depending upon the certificate selected by u, system will give u warning or error msg for certificate confirmation at the time of gr. for confirmation QC51 t_code is used. here status has to be changed to 'filed and inspected' then gr will be allowed.
    all these certificates can be dispalyed in QC55 T_CODE.
    CASE2
    U can record results and see in inspection report tab in QA33
    Edited by: YOGINI B THORAT on Aug 4, 2009

  • What are the best practice for CQ5.5 configuration?

    Hello,
    What are the best practice for CQ5.5 configuration which handle for High availability.
    Last time I had a issues on server when I was uploaded 2 GB of DAM and then after that the server is not able to start and always getting error regarding Tar Persistance.
    So kindly request you to please let me know what are the best apache felix configuration.
    Thanks in advance...
    Regards,
    Satish

    Hi,
    A DAM upload, regardless of the size of the assets, never should result in TarPM problems, unless you run into an OOM, which left the repository in an unclean state. So if you regularly do DAM uploads of that size, you should check the Garbage Collection logs and probably adjust the heapsize if necessary. You might want to limit the number of concurrent running workflows to keep the memory consumption a bit lower.
    To your question: HA in a traditional sense you cannot achieve with a single box, even with optimized settings. In an author usecase you would need clustering.
    Jörg

  • What are the materials used for the earbuds/earphones??

    What are the materials used for the earbuds/earphones?? Like whats the plastic used and what are the speaker materials and the volume button???

    Hello Veronica176
    The materials in Apple headphones include Neodymium magnets, oxygen-free electrolysis copper wire and a Nickel plated plug
    Apple uses Neodymium magnets in their headphones as it is much more magnetic compared to that of a ferrite magnet. This also further enhances the accoustics of sound and preventing any loss of sound. Because of this, you can get the same sound out of Apple headphones as the good ol' circum-aural headphones (image attached).
    Oxygen free copper wire is created through electrolysis which is furthermore considered an above average material for headphones, thus ensuring better sound quality. Oxygen free copper wire ensures a faster transfer time (as copper is one of the best conductors) and because of this, allows a faster transfer time, minimising loss. This means the sound quality of the music/sound playing may actually depend more on the quality of the MP3 file than the headphones.
    The nickel plated plug used by Apple is a standard connection and joins to a female connection into the iPod (for example) which is also nickel plated. Where gold plated plugs are renowned to transfer more data and superior sound quality when connected to any device. Connecting the same metals during transfer (nickel plated plugs and nickel female connections) ensures optimum sound as the signal will not be jumping different kinds of metal. The lack of gold plating also helps to reduce the cost in manufacturing and to the customer.
    If you have any more queries, please feel free to ask further questions, it is what we are here for

  • What are the config steps for contract mass change and quota arrangement?

    Hi friends
    what are the config steps for contract mass change and quota arrangement?
    Regards
    Raj Kumar

    Process Flow
    The mass change process consists of four steps. You navigate between these steps by choosing the Next and Back buttons located at the bottom right-hand corner of the screens.
           1.      Search for contracts
    You search for and select the contracts or the contract hierarchy that you want to change.
    Contracts that have the status Closed cannot be changed.
           2.      Define mass changes
    You specify the changes you want to make.
    You make changes at header data level and at item data level by choosing the relevant change methods. A green tick appears next to each change parameter so that you can see where changes are already active.
    Once you enter this step, the documents you have selected to be changed are locked so that other users cannot make changes to them until you are finished with this process.
           3.      Simulate mass changes
    Here you can perform a trial run of your mass changes. This simulation step is optional.
    We recommend that you perform this step so that you can check how the change methods you have chosen will be processed by the system.
    You receive status messages about the change methods for each contract and can quickly see whether any errors arise in connection with the proposed changes at this stage. From this step, it is easier for you to go back and correct the error than after applying the changes.
    Background processing
    The system processes the changes in the background.
    If there are a large number of contracts to be processed, this step could take some time to complete. In this case, you can leave the transaction so that you can, for example, carry out other tasks in the meantime.
    The system sends you an e-mail once the simulation step is complete. The e-mail contains a link to the relevant screen in the application so that you can return to it when it is convenient for you to do so. If you have left the SRM application, you can only return via this link.
    Here you can see the status of the changes and, if necessary, you can correct any errors by going back to the Define mass changes step.
    The messages that you receive in the simulation step are not confirmation that a change has been performed. They simulate the messages you get after you apply the changes. You must complete the final step of the mass change process and apply the changes before they take effect.
           4.      Carry out mass changes
    Here you apply the changes to the contracts.
    You cannot reverse this step, which is why we advise you to perform the simulation step beforehand.

  • What are the field names for below mentioned

    Hello Friends
    What are the fields names for below tables
    in EKKO
    Purchase Document Date
    Net Value of the purchase document.
    In EKPO
    Item Description
    From which place We bought it. (It means in Sales Items there we can know from which plant we sold the goods, like in EKPO, there is any field like this)
    Please let we are defining the report to find out the stock availability for perticular storage location using select Options plant, company code, material no.
    How many tables involve her to build this report. and also field names, they come under which table.
    Please send me this information ASAP. PLz Plz Plz..........
    Regards
    Praveen

    You can check the fields of these tables via SE11
    Purchase Document Date  -  EKKO-BEDAT
    Item Description  -  EKPO-TXZ01
    Net price per item - EKPO-NETPR.
    Regards,
    Rich Heilman

  • What are the settings required for QM in procurement

    Hi Team,
    What are the settings required for QM in procurement. I have  set indicator for QM in procurement in QM view in material master.
    I am not clear about  following fields to be maintained in QM view.
    QM Control Key
    Certificate type
    Target QM system
    Tech. delivery terms Indicator.
    Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
    Thanks

    Hi,
    All meaning are
    QM Control Key :
    If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
    Certificate type :
    Certificate types applies to the Certificate processing in procurement  &  Certificate creation
    Target QM system :
    whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
    -  If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
    -  If you want Vendor's perticular certificate for Material then you have to define Certificate type.
    Also, you have to maintain Material, Vendor's Info record at plant level.
    Thanks,
    JM

  • What are the data sources for 0FIGL_V10 cube Balance Sheet and Profit& Loss

    What are the data sources for 0FIGL_V10 (G/L (New): Balance Sheet and Profit and Loss) cube. and whether we can install business content regarding this.
    Please help me out.
    thanks,
    sapsdnhelp

    Hi,
    Check this:-------
    Urgent: Relevant Master Data Data Sources for FI-GL  & FI-AP
    http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
    Regards,
    Suman
    Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM

  • What are the classes used for bropdownListBox in BSP and purpose and how

    what are the classes used for bropdownListBox in BSP and purpose and how
    thank you,
    Regards.
    Jagrut BharatKumar Shukla

    Benje001,
    Right-click on the CWAI control on your form. Choose Properties. The first tab is the Channels tab. After you choose your device from the drop down box on the right, you can type in the Channels box which channel you want to use.
    If you want to see a CWAI control that is already configured, all of the shipping examples will have this already done.
    Also, if you have questions about any item on the CWAI (or any other NI ActiveX control) you can click the ? icon in the right corner of the properties page and then click on the item in the dialog that you need help with. This "What's this" help will describe that particular control on the dialog.
    Hope that helps!
    Regards,
    Shannon R.
    Applications Engineer
    National Instruments

  • What are the Things required for BI 7.0 Implementation project

    Hi Friends,
                      Can any one suggest me
    1.What are the Things required for BI 7.0 Implementation project?
    2.System Configurations & Hardware Components?
    3. Any additional steps...
    plz suggest me.
    Regards

    Hi lakshmi,
    http://csc-studentweb.lrc.edu/swp/Berg/articles/PM_2006_upgrade_NW2004s_Bjarne_Berg_v12.ppt#426,3,Why Upgrade u2013 end of supportu2026
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d163a7-0301-0010-d9b0-98f692ea3c60
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
    https://wiki.sdn.sap.com/wiki/x/JYk
    Check the following links.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    check the following
    http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
    business content
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
    https://websmp203.sap-ag.de/co
    http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm

  • What are the versions required for JBOSS,JDK and ORACLE to setup the ATG 10.2.

    Hi Folks,
    Could you please share, What are the versions required for JBOSS, JDK and ORACLE to setup the ATG 10.2.
    Thank you.

    In case you don't have access to MOS :
    JBOSS : 5.1.2 EAP
    JDK : 1.6.0_38
    ORACLE :
    Oracle Exadata5
    Oracle 10gR2 (10.2.0.3)
    Oracle 10gR2 RAC (10.2.0.3)
    Oracle 11gR2 (11.2.0.2.0)
    Oracle 11gR2 RAC (11.2.0.2.0)

Maybe you are looking for

  • How to generat multiple invoices based on per employee/contractor/services?

    Hello Experts / Dina, I am in situation where customer is in business of body shopping and charges to his final customer based on individual invoice / per employee /contracor & customer services. This was happening in legacy system but after the impl

  • Resize images in animations *without* scaling

    Keynote's animations allow you to resize objects (e.g. shapes) by scaling - i.e. having a shape grow or shrink during presentation, while keeping its aspect ratio constant; but what if you want to just specify the final dimensions yourself, such that

  • Highest level folders in Project Library

    I haven't used iMovie since iMovie '06. At that time I created a project called "Old TV Spots." I recently upgraded to a new MacBook Pro and imported video of a live concert into iMovie '09. iMovie '09 imported my old project and there's now a folder

  • Locking in Merge Statement

    Hi All, I am using merge statement to insert and update rows. The merge statement takes a row level exclusive lock Suppose the select statement returns 1 Million records does 1) The merge statement first tries to lock all the affected rows and then u

  • Is there any way to manage multiple CC memberships from a single account?

    Is there any way for all our CC accounts to be managed by a single account, to manage things such as billing, etc? It would save my company time and confusion when we have to do things such as set up a new credit card number (which we would have to d