What are the specifications for Internal Hardisk 500GB Macbook Pro (Mid-2012)?

I need to purchase a new internal hard disk for my Macbook, I'm gonna go for 500GB space.
Now. I need to know the specifications. I don't want suggestions, because I live in India and I may not be able to purchase the harddisk which you tell me to.
1. http://www.flipkart.com/wd-scorpio-blue-500-gb-laptop-internal-hard-drive-wd5000 lpvt/p/itmdnymtym9nrpnd?pid=IHDDHVGZAFMXBZK2
2. http://www.flipkart.com/toshiba-500-gb-desktop-internal-hard-drive-dt01aca050/p/ itmdcvv2csptdmbs?pid=IHDDCVQGQYZGZ6XK&ref=18872ea3-7bd1-4582-8e9a-5d4f40a94531
Will any of the above two harddisk work with my 13 inch Macbook Pro (Mid 2012) model?

Drive #2 would be your best bet - except for the fact that it's a 3.5 inch drive and you need a 2.5" x 9.5mm drive.
Look on your site for HGST 7k1000 drives - 1TB and it will 'fit' your machine exceptionally well.
Clinton
Message was edited by: clintonfrombirmingham
Here's a good one.

Similar Messages

  • What are the materials used to make a macbook pro?

    What are the material used to make a macbook pro?

    http://www.apple.com/environment/reports/
    In these reports are breakdowns like this:
    as well as other information regarding, for instance, restircted substances.

  • What are the pre instaled softwares in a macbook pro?

    pls let me know what are the pre instaled softwares in a mac?
    jose jacob

    http://store.apple.com/us/buy-mac/macbook-pro

  • What are the best ways to attach my macbook pro to our soundboard

    I need to upgrade the way in which I attach my macbook pro to our soundboard in order to improve quality recording and sound output. Which cables do I need to purchase? I am using a 2007 macbook pro/Snow Leopard OS. Thanks!

    The sound input can use an optical/digital cable from your soundboard (if you have the digital out).  You can use a whole host of products to record the sound using the MIDI setup along with something like Garage Band or Audacity (free) to something professional like Logic Pro 9. 

  • What are the safest places to put my Macbook Pro charger to prevent it from overheating?

    My charger heats a lot, maybe somebody can give me some tips to prevent my charger from becoming ruined. I wouldn't want to buy a new one.
    Thank you so much.

    Make sure that the wall area  where you plug in the power adapter is well ventilated.
    For more on this:
    http://support.apple.com/kb/HT5234
    Best.

  • What are the mac-compatible internal/external dvd burner for 12"Pbook

    what are the mac-compatible internal/external dvd burner for 12"Pbook

    ibodnano:
    You will find internal optical drivers from OWC here. You will find external DVD burners from OWC here.
    For the external drives, almost any Firewire burner will be supported by your PowerBook. Here are a few. You can further refine the filters.
    Good luck.
    cornelius

  • What are the specific requirements for scalability?

    Hi
    what are the specific requirements for scalability?
    for a share point  internet portal
    adil

    Hi  Adil,
    According to your description, my understanding is that you need to know about SharePoint Scalability.
    For your issue, please have a look at the blog:
    http://technet.microsoft.com/en-us/library/cc262787(v=office.15).aspx
    https://www.linkedin.com/today/post/article/20140610232851-17468776-scalability-planning-in-your-sharepoint-2013-office-365-roadmap
    http://www.slideshare.net/garthluke/effective-sharepoint-scalability-management-to-blob-or-not-to-blob-thats-the-question
    http://download.microsoft.com/download/7/F/0/7F069D0B-B6BD-4692-868B-E8555BB72445/LargeScaleDocRepositoryCapacityPlanningDoc.docx
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • What are the things required to upgrade internal hard drive For Macbook Pro mid 2012 13 inch?

    Hi,
    I want to upgrade my internal drive but I don't know how to do that. I have already purchased a WD 1TB internal hard drive. However, I contacted apple support and they said if I try to upgrade the hdd myself, then the warranty of the macbook would be void. I am from India . I currently have a Macbook Pro mid 2012,13 inch.
    Also, do i need to download a setup of Yosemite before changing the hdd?
    Please guide me
    Thanks and Regards
    Abhineet Arora

    You know what the impact will be on the warranty terms.  If you want to install it yourself, look at this video:
    http://eshop.macsales.com/installvideos/macbookpro_13_unibody_mid12_hd/
    It is not very difficult.  You will need a #00 Phillips and a #6 Torx drivers.
    Ciao.

  • Apple TV: what are the specific settings I should adjust to?

    Hi, there
    I really need your help now. I use a DVD ripper to rip DVD to MP4 for Apple TV. I am trying to achieve quality that is close to a movie (m4v) from iTunes. What are the best settings to get this type of quality? I am not concerned with output file size, and I just want to get the very best quality I can. If so, what are the specific settings I should adjust to? The program I am using allows me to adjust video and audio parameters as below:
    Video parameters:
    Codec: h.264
    Resolution: 1280*720
    Bit rate: ??? (it is said Up to 5 Mbps, but what is the specific bit rate?)
    Frame rate: 24 fps
    Audio parameters:
    Codec: aac
    Sample rate: ???
    Bit rate: ??? it is said 16 to 320 Kbps, but what’s the specific figure?
    Audio channel: mono, stereo and 5.1 channel, which one should I choose?
    Following are the tech specifications I copied from Apple’s official website:
    Video formats supported
    H.264 and protected H.264 (from iTunes Store): Up to 5 Mbps, Progressive Main Profile (CAVLC) with AAC-LC audio up to 160 Kbps (maximum resolution: 1280 by 720 pixels at 24 fps, 960 by 540 pixels at 30 fps) in .m4v, .mp4, and .mov file formats
    iTunes Store purchased video: 320 by 240 pixels, 640 by 480 pixels, 720 by 480 pixels (anamorphic), or high-definition 720p
    MPEG-4: Up to 3 Mbps, Simple Profile with AAC-LC audio up to 160 Kbps (maximum resolution: 720 by 432 pixels at 30 fps) in .m4v, .mp4, and .mov file formats
    Audio formats supported
    AAC (16 to 320 Kbps); protected AAC (from iTunes Store); MP3 (16 to 320 Kbps); MP3 VBR; Apple Lossless; AIFF; WAV; Dolby Digital 5.1 surround sound pass-through
    And I have selected some parameters according to this, please see the above contents, but there is no info about specific video/audio bit rate, audio sample rate, and audio channel. I just wanna know if I want to watch the movie on my 1920×1080 TV, what are the specific settings I should adjust to?
    Any suggestion is appreciated. Thanks in advance.

    Well, then how about playback Apple TV uncompatible video files? I have some other video files(such as avi, mkv,not DVD), and I also have a video converter, i know i can convert them to m4v, mp4, or mov that supported by ATV,but the thing is that i still don't know the best specific settings for conversion. Any suggestion? Many thanks for your kind reply.

  • What are the ranges for correct skin tones using RGB%?

    What are the ranges for correct skin tones using RGB%?  Used to using a scale from 0 to 255.  But with LR it's RGB  , I know 100% RGB is white.  What do you use for %?

    While I whole heartedly agree that we should not be constrained to hard and fast numbers for accurate skin tones ... LR does offer an RGB color readout ... I am assuming they made those percentages available for the user to monitor the breakdown of specific color values for a reason ... so we could have an indication of how a specific color in an image will be reproduced ...
    I liken this to using a speedometer ... while many experienced drivers in well tuned vehicles can travel on the highway at the prescribed legal speed limit without really monitoring the readout on the dashboard ... however, there are times when they would like to verify the speed at which they are traveling ... the RGB color percentage readout in LR is no different ... just a source of information to verify you are achieving what you desire ...
    Again, going by specific numbers in this instance, I believe, could lead to problems ... there may be times when you may desire or actually need to adjust skin tones ... even though a pleasing WB has been achieved ... the relationship of R, G and B can be used to get you there.
    From what I have researched and put into practice with LR the following seems to be a good starting point and the data was borrowed from "the pixelation" blog:
    R: highest %
    G: middle %
    B: lowest %
    To get a little more specific. In general,
    R: Y + (15-20)
    G: average of R and B
    B: R – (15-20)
    For example, the following values represent common Caucasian skin tones using the rules above:
    * R: 80%; G: 70%; B: 60%. R is 20 points higher than B, and G is midway between R and B. That’s perfect.
    *  R: 86%, G: 78%; B: 70% also reflects a nicely balanced skin tone.  Again, G is midway between R and B, and R is 16 points higher than B. This, too, illustrates a great relationship among the colors.

  • My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

    My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

    Debbie:
    deborahfromwindsor wrote:
    he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
    Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
    That's where I would begin, too, with
    Repair Disk
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
    First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
    cornelius

  • In Address Book, Lion, what are the checkmarks for when you Edit a Contact?

    In Address Book for Lion, when you are in the Add/Edit a Contact window, what are the checkboxes for?

    I am not seeing any checkboxes when I edit in Address Book in Lion, can you take a screen shot (Shift Command 4) of what you're seeing and post it?
    BTW please fill out your profile (under Your Stuff above) so we know what machine and version of Lion you're using.

  • What are the steps for loading master data

    Hello
    what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
    if anyone has documents please send me the documents i will be really greatful
    [email protected] thanks everyone
    Evion

    Hi Heng,
    Download the data into a CSV file.
    Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
    http://www.sap-img.com/abap/vendor-master-upload-program.htm
    Reward Points for the useful solutions.
    Regards,
    Harini.S

  • What are the  Specifications of Extreme  Model A1354

    What are the  Specifications of Extreme  Model A1354

    If you might be thinking about purchasing a used device, you should be aware that the A1354 is going to be anywhere from 4 years to 5+ depending on when it was originally sold.
    The useful life of an AirPort router is, on average,  about 5 years....so you might want to give that some thought, if you are considering a purchase.

  • What are the settings for Primere Elements 9 if I've filmed with a Canon Powershot sx50 HS?

    I just got this camera and I want the best quality possible. Unfortunately, it's hard for me to fully know if the settings I try create that. I get a fuzz or noise on objects like if I'm wearing a black jacket it's like static. When I put the video on my phone which is an Android Galaxy s4 it converts it into mp4 format and I get much more clear results than on my computer which perplexes me. I did a lot of trial and error with my previous camera (JVC Full HD Everio) which I got the same results. My newer Canon should be leagues ahead of the JVC, but I really can't tell as of yet. If anyone could help that would be awsome. I have examples of my trials and errors from my Youtube videos which you can see I felt I was slowly making progress with the JVC Oppositeofhood - YouTube

    Opposite
    Then I saw your latest post
    Wait, I think I just found it. I pressed record on different settings to take pictures with like portrait to see if it would make a difference and when I uploaded them to my computer I found where it shows the BIt rate and it varied. They run at 23 frames per second 1920 x 1080 MOV video files and all the Bit rates are like 36,356 35,414 ,36,521
    If your camera is recording with a variable bitrate, the Bitrate variations from file to file should not be contributing to the issue. But it does raise the issue related to whether or
    not we are setting the appropriate bitrate level in the export settings. What are the units for 36,356, 35,414, and 36,517 -
    kbps (also can be written Kbps) and is kilobits per second
    or
    Mbps which is megabits per second.
    Let us try this for one of your 1920 x 1080p24 videos.
    Go through the following workflow
    Manually set project preset...
    NTSC
    DSLR
    1080p
    DSLR 1080p24
    When you go to export your edited Timeline content, then use
    Share
    Computer
    QuickTime
    with Presets = NTSC DV 16:9 - that is going to be customized to 1080p24 (H.264.mov) under the Advanced Button/Video Tab of that preset
    The essential settings under the Advanced Button/Video Tab
    Video Codec = H.264
    Frame Width = 1920
    Frame Height = 1080
    Frame Rate = 23.976
    Field Type = Progressive
    Aspect = Square Pixels (1.0)
    Now here is where we are going to experiment....
    Bitrate
    Check Mark next to Limit Data Rate to and type in 36000 before kbps
    note the file size of the export as well as the quality of the playback.
    Repeat the whole process but in export
    Remove the check mark next to Limit Data Rate. The Bitrate field will be disabled.
    note the file size of the export as well as the quality of the playback.
    We will be watching for your results.
    Thanks.
    ATR

Maybe you are looking for