What are the specifications of the accelerometer in iPads

Could someone please give me the specifics of the ipad accelerometers please. Im using Ipads for medical reasearch and need to be able to state the accuracy e.t.c ?

Alancito wrote:
lkrupp wrote:
Steve changed the name to just Apple, Inc. some years ago in case you forgot.
Ikrupp ~ Not quite. Last year Apple stated the following in a response to a complaint by HTC:
"Apple denies that its correct name is Apple, Inc. The correct name of Respondent is Apple Inc." (Source)
Touché

Similar Messages

What are the Versions of ipad 3

What are the Versions of ipad 3

They are listed on this page : http://www.apple.com/ipad/specs/ - 16, 32 and 64 gig versions of the wifi-only and 4G/wifi models

What are the differences between iPad air and iPad air2

Hello wish to know the differences that exist the ipad air 2 and the ipad air. thank you

See the first 2 columns of http://store.apple.com/us/ipad/compare

What are the Specifications of Extreme Model A1354

What are the Specifications of Extreme Model A1354

If you might be thinking about purchasing a used device, you should be aware that the A1354 is going to be anywhere from 4 years to 5+ depending on when it was originally sold.
The useful life of an AirPort router is, on average, about 5 years....so you might want to give that some thought, if you are considering a purchase.

What are the scaling co-efficients for Accelerometer input in Daq-mx ?

hi
im using daq-mx to take accelerometer input.
i want to read the raw data and scale it myslef later.
i want to know what are the scaling co-efficients for the accelerometer input in daq-mx and what is the process of determining them.
thanks.

Rahul,
I've answered your question in another thread you can check using the
following link:
http://forums.ni.com/ni/board/message?board.id=250&message.id=14353
I hope this helps answer your question.
Jason

Apple TV: what are the specific settings I should adjust to?

Hi, there
I really need your help now. I use a DVD ripper to rip DVD to MP4 for Apple TV. I am trying to achieve quality that is close to a movie (m4v) from iTunes. What are the best settings to get this type of quality? I am not concerned with output file size, and I just want to get the very best quality I can. If so, what are the specific settings I should adjust to? The program I am using allows me to adjust video and audio parameters as below:
Video parameters:
Codec: h.264
Resolution: 1280*720
Bit rate: ??? (it is said Up to 5 Mbps, but what is the specific bit rate?)
Frame rate: 24 fps
Audio parameters:
Codec: aac
Sample rate: ???
Bit rate: ??? it is said 16 to 320 Kbps, but what’s the specific figure?
Audio channel: mono, stereo and 5.1 channel, which one should I choose?
Following are the tech specifications I copied from Apple’s official website:
Video formats supported
H.264 and protected H.264 (from iTunes Store): Up to 5 Mbps, Progressive Main Profile (CAVLC) with AAC-LC audio up to 160 Kbps (maximum resolution: 1280 by 720 pixels at 24 fps, 960 by 540 pixels at 30 fps) in .m4v, .mp4, and .mov file formats
iTunes Store purchased video: 320 by 240 pixels, 640 by 480 pixels, 720 by 480 pixels (anamorphic), or high-definition 720p
MPEG-4: Up to 3 Mbps, Simple Profile with AAC-LC audio up to 160 Kbps (maximum resolution: 720 by 432 pixels at 30 fps) in .m4v, .mp4, and .mov file formats
Audio formats supported
AAC (16 to 320 Kbps); protected AAC (from iTunes Store); MP3 (16 to 320 Kbps); MP3 VBR; Apple Lossless; AIFF; WAV; Dolby Digital 5.1 surround sound pass-through
And I have selected some parameters according to this, please see the above contents, but there is no info about specific video/audio bit rate, audio sample rate, and audio channel. I just wanna know if I want to watch the movie on my 1920×1080 TV, what are the specific settings I should adjust to?
Any suggestion is appreciated. Thanks in advance.

Well, then how about playback Apple TV uncompatible video files? I have some other video files(such as avi, mkv,not DVD), and I also have a video converter, i know i can convert them to m4v, mp4, or mov that supported by ATV,but the thing is that i still don't know the best specific settings for conversion. Any suggestion? Many thanks for your kind reply.

What are the contents in technical specifications

What are the contents in technical specifications
could u plz explain clearly

hi rajeshreddy,
Below are the standards for Tech specs
1.1 Development Attributes
Program Name:
Title:
Application:
Development Class:
Message Class:
Program Type:
Execution Mode:
Schedule Frequency:
Variant:
1.2 Program Functionality
1.3 Output Fields
Output Label
Related SAP table-field (if any)
Length
Output Characteristics
1.4 Proposed Solutions
1.5 Solution to be implemented
1.6 Reasons of selection/rejection
1.7 Pseudo-Code / Flow Logic of the selected solution
1.8 Selection Screen
1.9 Database Tables Used
Table Name
Table Description
How the table is used in the program
1.10 External Files Used
1.10.1 External File Layout <file name>
1.11 Components External to Program Used
1.12 Error Conditions
1.13 Key Technical Test Conditions
1.14 Sample Test Data
1.15 Assumptions
1.16 Comments
regards,
amit m.

What are the technical specifications of the monitor Macbook

What are the technical specifications of the monitor Macbook Pro 15 "and 17"
The screen is IPS?
Qawl the viewing angle?
etc.

For example:
Monitor Size: 24 "LCD
Maximum Resolution: 1920 x 1200 at 60 Hz
Best: 1920x1200 at 60 Hz
Viewable Image Size (VIS): 24 "
Panel Technology: IPS
Color Gamut: 110% (CIE1976) / 102% (1931) / 100% (sRGB coverage)
Aspect Ratio: 16:10
Dot Pitch: 0.270 mm
Response Time: 6 ms Typical
Brightness: 400 cd / m²
Contrast Ratio: 1000:1 / 80,000:1 DCR
Horizontal Viewing Angle: 178 ° / 178 °
Connector Type Video Input: VGA, 2xDVI-D, S-Video,
Composite Video, Component Video, DisplayPort, HDMI
USB: Yes
Card Reader 8 in 1: Yes
Compatible with AX510 (Sound bar): Yes
Compatible with VESA wall mount: Yes 100mm
Screen Rotation: Yes
Height Adjustment: Yes
Compliance Energy Star: No

What are the optimal hardware specification requirements for Adobe Photoshop CS6?

Greetings to the staff and users of this forum,
As the title clearly stipulates, the question is "What are the optimal hardware specification requirements for Adobe Photoshop CS6?".
Unfortunately, I am not satisfied with the specs specified on the website, as I believe they are far lesser than the specs needed to run the program at its full potential. This belief comes from my experience with the product Adobe Photoshop CS2 that I currently run on my computer. In effect, Ps CS2 cannot fully run without inducing time lags on my computer (i.e. when using 500 pix diameter smudge tool/ using liquify gallery), even though my specs are already higher than those specified for CS6 (mine are: Intel Core 2 Duo 6300 1.86 GHz, 3 GB RAM). I can assure you that I get those time lags even when almost in safe mode (only system main processes running) and that my computer is clean from any process/virus that could lower its performances.
I've been through two chat rooms and four telephone operators to always get the same answer: the specs on the website.
If any user here could provide me with proper higher specs, I would really be grateful.
Thanks,
phdwengr

This document looks at different workflows and gives recommendations. It should give you an idea of what's needed.
http://blogs.adobe.com/jnack/files/2012/07/CS6_hardware_recommendations.pdf

What are the specific requirements for scalability?

Hi
what are the specific requirements for scalability?
for a share point internet portal
adil

Hi Adil,
According to your description, my understanding is that you need to know about SharePoint Scalability.
For your issue, please have a look at the blog:
http://technet.microsoft.com/en-us/library/cc262787(v=office.15).aspx
https://www.linkedin.com/today/post/article/20140610232851-17468776-scalability-planning-in-your-sharepoint-2013-office-365-roadmap
http://www.slideshare.net/garthluke/effective-sharepoint-scalability-management-to-blob-or-not-to-blob-thats-the-question
http://download.microsoft.com/download/7/F/0/7F069D0B-B6BD-4692-868B-E8555BB72445/LargeScaleDocRepositoryCapacityPlanningDoc.docx
Best Regards,
Eric
Eric Tao
TechNet Community Support

What are the Apple Mail SPECIFICATIONS?

What are the Apple Mail 6.5 specifications on Mac with OS X 10.8.4 (Mountain Lion)? For instance...
How many mailboxes can handle?
How many messages in each mailbox?
Any size limit for each mailbox or the full set of mailboxes?
BTW, I think that such information was in
http://docs.info.apple.com/article.html?artnum=25812
but the docs.info.apple.com site seems to have gone. Where are the Apple info documents now?
Thanks.

There are no set specifications for these. In general:
* It can handle lots of mailboxes. I'm sure thousands would be fine, though it would be a chore to manage. With Spotlight, I think fewer mailboxes is better. I have 10 mailboxes, with between 10,000 and 30,000 messages each.
* It can easily handle many messages in a mailbox. 30,000 is easy, and it can probably do 100,000+
* There are no size limits for the mailboxes. Mostly disk space.
I'll note that Adam Engst had issues with an older version of Mail and 1 million messages:
http://tidbits.com/article/12382
I bet it works better now, but I personally have 11 mailboxes and 114,306 messages in Mail at the moment and have noticed no slowdown in performance whatsoever.

Considering upgrading to solid state drive for Macbook Pro 2010. What are the specific requirements?

I am starting to experience some problems (very minor issues w speed) w my 2010 MBP. I decided to try and reformat w the install disk but it stalled on the grey screen and when I took it to the Genius Bar and they said they could do the re-install but that they think there could be a problem with the hard drive and it may crash completely after a re-install. They suggested an SSD. I found one on the iFix it site (SanDisk's top of the line X210 256 GB SSD) and am wondering what are the features I need to look for in an SSD if I go this route? Are there other parts in the MBP that will probably break in the next couple of years anyway? Will I see a big improvement in speed?

yes, you should definately swap the drive out, but be sure that the ssd you wish to purchase will be compatable with your mac.
yes, the mac will seem a lot faster. also give a thought to adding more ram, i believe your model is capable of quite happily handling 8g. 2 x 4g sticks.
no one can be sure of the future, so, if your mac is running well apart from the above then dont be concerned untill a problem occurs.

What are the ideal specs for a DigiBeta master tape when authoring a "widescreen anamorphic" 16:9 SD DVD (original aspect ratio is 14:9)?

I just received the masters for a new SD DVD. I would like to author a "widescreen anamorphic" SD DVD horizontally squeezed widescreen image stored in a standard 4:3 aspect ratio DVD image frame. (On 4:3 displays, mattes should preserve the original aspect ratio. On 16:9 displays the image will fill the screen at the highest possible resolution.)
Below I've listed the specs of the Digi Beta master tapes the producers have sent to me for digitizing. I'd like to know this: What are the ideal specs for a DigiBeta master tape when authoring a widescreen anamorphic SD DVD, using material with an original aspect ratio of 14:9?
I've also listed my guesses below. Please let me know if my guesses are right. If not, please suggest alternatives (and if possible explain why.)
TECHNICAL SPECIFICATIONS OF EXISTING MASTER:
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: NTSC - CCIR 601
Frame Size: 720 x 480
Anamorphic: Full-Height Anamorphic (16:9 image displayed in letterboxed, non-distored 4:3)
Display Format: 4:3 Letterbox
MY GUESS AT IDEAL TECHNICAL SPECIFICATIONS (for a DigiBeta, that is):
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: Square
Frame Size: 720 x 540
Anamorphic: YES
Display Format: 16:9 Anamorphic (horizontally squeezed widescreen image)
Please feel free to ask for clarification or further information you need to answer my question.
Thank you so much in advance for your help!
Best, Noetical.
BTW, I can't wait for the day when everything has gone digital and we get digital intermediates instead of tapes to digitize!

Hi Nick...thanks for taking the time to reply to my question.
Nick Holmes wrote:
What you have there is a mess.
NTSC pixels are never square.
NTSC is 720x486, even when it is Anamorphic.
You shouldn't be using an already letterboxed master to make an Anamorphic version. Get the master that was made before the letterboxing stage.
When you make an Anamorphic DVD it should display as 16:9 full screen automatically on widescreen TVs.
The same DVD will automatically letterbox on 4:3 TVs.
Um yeah...duh. That's exactly what I was trying to explain in the preface of my question. I'm sorry if I didn't make it clear...all these things you mention are the reasons I'm putting together a list of the technical specs of the DigiBeta I need so I can have them send that instead of the stupid letterboxed version.
Look, I'm sending this request to some intern at their offices in England, asking for a master with which I can make an Anamorphic DVD. They already sent me this master, which as you and I both agree is an idiotic asset to use for these purposes. As such, I was hoping for advice on a more precise way of requesting the master that I need than asking for "the master that was made before the letterboxing stage." Upon reflection, perhaps I'll just do that. If you or anyone else has a suggestion about something I should add to my request that would improve the odds of them sending the tape I need, please repond. Thank you!
BTW, It's been a long time since anyone has responded to something I've written or said as though I'm an idiot. I remember now that I don't really like it. (Moving along...)

What are the major components in class?

1)     What is the purpose of load-of-program? When it will be trigger?
2)     Write the code for displaying the three parameters in single line with the first parameter as mandatory in the selection screen?
3)     Which event triggered whenever the user call the function BACK, EXIT, CANCEL?
4)     What are the major components in class?
5)     What is the functional module is used to get popup screen for ALV reports?
6)     Which type of pool is used to get drop-down list?
7)     What is the tcode for creating the variant truncations?
8)     Is it possible to call LDBs number of times in same report?
9)     What are the conditions to use control break statements in our report program?
10)     What is the use of range statement?
11)     What is the difference between normal reports and alv reports? With comparing to normal report are there any disadvantages in alv reports?
12)     What are the components used to suppress the fields in the selection-screen?
13)     What is the standard program to transport selection screen variants?
14)     What is the event keyword for defining event block for reporting events?
15)     What is the specific statement use when writing a drill down report?
16)     What are the different tools to report data in sap?
17)     Write the menu path to create a selection text in reports?
18)     How do we omit the leading zero s while formatting outputs in reports?
19)     What are the report truncations?
20)     How do we align selection input in single row?
21)     How do we suppress the display of input fields on selection screen?

this forum is not for answering your interview questions...if you stucked with any realtime problem then post...please try to respect forum terms and conditions.
Thank you.

What are the precautions to be taken while archiving the POs' and Material

Hi All,
I want to archive the Purchase orders and Material documents. Is there any standard rule to follow this procedure. What are the further consequences for the consecutive documents. And how do you check the open POs' of all.
I have archived PRs' and Invoices, but these are not interlinked.
Could you please help me in this, so that I will be very much thankful to you.
Regards,
Ram

Dear Ramesh,
Go to Tcode ARCHGUIDE --> Application Specific analyses and setting --> MM -->MM_EKKO and MM_MABTEL
You can tick on the documentation and link to SAP help for all the guide and need for this archiving.
Regards,
w1n

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

My iSight is not working on my Macbook Pro. What are the possible problems and solutions?

Hello Douglas,
Thank you for the details of the issue you are experiencing with the built-in iSight camera on your MacBook Pro. I recommend the following steps for this issue:
Important: Follow these instructions in order. Test the camera between steps to see if the issue is resolved.
Built-in iSight cameras
These steps are for iSight cameras that are built into a computer, such as the iMac G5 (iSight) or later, the MacBook, or MacBook Pro.
See if the issue is application-specific.
Try another application (iSight works with applications like iChat, PhotoBooth, and iMovie HD 6) to see if the iSight camera exhibits the same behavior in all applications. If it only happens in one application, try reinstalling that application.
See if the issue is user-specific.
Test your iSight camera in another user account. If the issue only occurs in one user, the issue would be isolated to user settings.
Find out if the computer recognizes the iSight
Check System Profiler (in the Utilities folder, inside the Applications folder). Under the USB header, check to see if the iSight camera is detected.
Reset SMC or PMU
Reset your computer's SMC or PMU, and then check System Profiler again. (SMC reset instructions for iMac G5 (iSight), Intel-based iMacs; PMU reset instructions for MacBook and MacBook Pro.)
If your built-in iSight camera is still not behaving correctly after trying all these steps, you may need to contact Apple or an Apple-Authorized Service Provider for service.
You can find the full article here:
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Thank you for using Apple Support Communities.
Best,
Sheila M.

What are the specifications of the accelerometer in iPads

Similar Messages

Maybe you are looking for