What are the specifics of the Facebook malware reported in NYT of August 26, 2013 Bits column?
Here is a link to the article:
http://bits.blogs.nytimes.com/2013/08/26/malicious-software-poses-as-video-from-a-facebook-friend/?nl=todaysheadlines&emc=edit_th_20130827
According to this, Firefox can be infected and typical virus/malware programs are not effective in addressing the problem because the malware blocks them.
I was looking for an alert or specific discussion.
i found it by looking into the block request of latest entry of blocklisted addons - this list is generally available under https://addons.mozilla.org/firefox/blocked
Similar Messages
-
Whats are the Forms and Reports in QM?and what is differece betwwen them?
whats are the Forms and Reports in QM?and what is differece betwwen them?
Hi,
1. Forms are like templates.Forms define the text format and page layout of documents, which can be formatted (in accordance with the definitions) for display on the screen or for output to a printer.
2. Executable program that allows users to read and evaluate data in the database.
You can either display the output of a report on the screen or send it to a printer. You can also save it, so that it can be displayed as often as you like. It is important to be able to do this, because reading large volumes of original data can impair performance.
Examples of reports are ABAP reports, queries, and drilldown reports.
In short, forms are only templates and reports will retrive the data from system in certain format.
Vishal -
What are the standard SAP reports in PP ?
Hi PP Guru's,
Please explain me the standard Reports available in PP with Tcode and give me
how to configure for the customer requirements incase if demanded by them a
change is reqd? pl give few of them
Thanx & regards,
VimalbalajiMATERIAL
CREATE-GENERAL MM01 IMMEDIETELY
MM11 SCHEDULE
CHANGE MM02 IMMEDIETELY
MM12 SCHEDULE
MM13 ACTIVATE
FLAG FOR DELETION MM06 IMMEDIETELY
MM16 SCHEDULE
DISPLAY MM03 DISPLAY CURRENT
MM19 DISPLAY AT KEY DATE
DISPLAY CHANGES MM04 ACTIVE CHANGES
MM14 SCHEDULE CHANGES
MM17 MASS MAINTENANCE
MMAM CHANGE MATERIAL TYPE
OTHER MMBE STOCK OVERVIEW
MMPV CLOSE PERIOD
MMRV ALLOW POSTING TO
PREVIOUS PERIOD
MM50 INSTANT MATERIAL VIEW
MMSC ENTER STORAGE LOCATIONS
MM60 MATERIAL LIST
ARCHIVING(MATERIAL) MM71 ARCHIVE/DELETE
MM72 DISPLAY ARCHIVE
BILL OF MATERIAL (MATERIAL BOM)
CS01 CREATE
CS02 CHANGE
CS03 DISPLAY
EXTRAS CS28 ARCHIVING
CS20 MASS CHANGES
EVALUATION/BOM CS11 BOM MULTILEVEL
EXPLOSION/MATERIAL CS12 STRUCTURE MULTILEVEL
BOM CS13 SUMMURISED BOM
WORK CENTRES
CR01 CREATE
CR02 CHANGE
CR03 DISPLAY
CA85 REPLACE
CAPACITY CR11 CREATE
CR12 CHANGE
CR13 DISPLAY
HIERARCHY CR21 CREATE
CR22 CHANGE
CR23 DISPLAY
LINE HIERARCHY LDB1 CREATE
LDB2 CHANGE
LDB3 DISPLAY
REPORTING CR60 W/C INFORMATION SYSTEM
CR05 W/C LIST
CR06 COST CENTRE ASSIGNMENT
CR07 W/C CAPACITIES
CR08 W/C HIERARCHY
WHERE USED CA80 WORK CENTRE
CR15 CAPACITY
CR10 CHANGE DOCUMENTS
EXTRAS CR09 STD. TEXTS TASK LIST
CR41 ARCHIVING
ROUTING
STAD. ROUTING CA01 CREATE
CA02 CHANGE
CA03 DISPLAY
REF. OPERATION SETS CA11 CREATE
CA12 CHANGE
CA13 DISPLAY
RATE ROUTING CA21 CREATE
CA22 CHANGE
CA23 DISPLAY
REF. RATE ROUTING CA31 CREATE
CA32 CHANGE
CA33 DISPLAY
EXTRAS CA85 REPLACE W/C
MASS CHANGES CA95 REPLACE REF. OP. SET
CA75 REPLACE PRT
DELETE TASK LIST CA99 WITH ARCHIVING
CA98 W/O ARCHIVING
REPORTING CA80 WORK CENTRE
WHERE USED LIST CA90 REF. OP. SETS
CA70 PRODUCTION RESORCE TOOLS
COST CENTRE
OKKP MAINTAIN CONTROLLING AREA
KS01 CREATE COST CENTRE
KZS2 CREATE COSTING SHEET
KA01 CREATE PRI. COST ELEMENT
KA06 CREATE SEC. COST ELEMENT
KL01 CREATE ACTIVITY TYPE
KP26 ACTIVITY TYPE/PRICE PLANNING
SALES AND OPERATIONS PLANNING
PRODUCT GROUP MC84 CREATE
MC86 CHANGE
MC85 DISPLAY
GRAPHIC MC91 PRODUCT GROUP
MC92 OVERVIEW
PLANNING MC81 CREATE
FOR PRODUCT GROUP MC82 CHANGE
MC83 DISPLAY
MC75 TRANSFER PG TO PLANNING
FOR MATERIAL MC87 CREATE
MC88 CHANGE
MC89 DISPLAY
MC74 TRANSFER MATERIALS TO DM
MC9K MATERIAL AVAILABILITY
VERSION MANAGEMENT MC78 COPY
MC80 DELETE
FLEXIBLE PLANNING MC93 CREATE
PLANNING MC94 CHANGE
MC95 DISPLAY
MC9K MATERIAL AVAILABILITY
TOOLS/PLANNING TYPE MC8A CREATE
MACRO MC8B CHANGE
MC8C DISPLAY
EVENT MC64 CREATE
MC65 CHANGE
MC66 DISPLAY
ROUGH CUT PLANNING MC35 CREATE
PROFILE MC36 CHANGE
MC37 DISPLAY
ENVIRONMENT MC90 TRANSFER MATERIALS TO DM
ACTIVITY REQT. KSPP TRANSFER TO COST CENTRE
KSBL COST CENTRE OLANNING REPORT
KSOP TRANSFER TO ACTIVITY BASED COSTING
CPBL PLANNING REPORT PROCESSES
MC9C REPORTING
SETTINGS MC96 FORECAST PROFILE
DISSAGGRIGATION MC76 BREAKDOWN PG PLAN
MC77 DISPLAY PG PLAN
MC75 TRANSFER PG TO PLANNING
MC74 TRANSFER MATERIALS TO DM
FORECASTING
INDIVIDUAL FORECAST MP30 EXECUTE
MP31 CHANGE
MP32 DISPLAY
TOTAL FORECAST MP38 EXECUTE
MP33 REPROCESS
MP39 PRINT
MPBT EXECUTE BACKGROUND
MPDR PRINT BACKGROUND
DEMAND MANAGEMENT
PIR MD61 CREATE
MD62 CHANGE
MD63 DISPLAY
MD65 REQTS. FOR SCINARIO
MD66 COPY SIMULATED DEPENDENT REQT.
MD70 COPY TOTAL FORE CAST
EVALUATION MD73 DISPLAY TOTAL REQT.
MD79 EXCELL INTERFACE
MD4C ORDER REPORT
MD72 CHARECTERISTICS PLANNING
CUSTOMER REQT. MD81 CREATE
MD82 CHANGE
MD83 DISPLAY
REPETITIVE MANUFACTURING
MASTER DATA C223 PRODUCTION VERTION
PRODUCT COST PLANNING
COSTING RUN CKMATSEL CREATE
SELECTION LIST CKMATCON Edit
CK40N EDIT COSTING RUN
Check with below Link :
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/process%2border%2bstatus%2bmanagement
Thanks
Seshu -
What are the good PRs Report ?
Dear Al,
I have used ME5K and ME5A .. but i have ome issues with them because they don't display what i really want .. and there some conflict in ME5A "Closed Prs indicator for example display the prs which not yet even released" and "Released Only display PRs Active"
so if you can give other reports could help in this .. or giving me a hand on ME5A
ThanksHi,
By flagging 'Requisns for overall release' check box the system lists all purchase requisitions that have to be released (approved) in their entirety.
The purpose of the 'Requisns.f.item-wise release' flag is not to exclude purchase requisitions that have already been released from the selection.
To select only blocked purchase requisitions, use the dynamic selections for 'Purchase requisition' and select the 'Subject to Release' field.
Hope the above provides a little more clarity.
Regards,
Vivek -
What are the basic steps to manually code an MRU with a 3 column PK?
Greetings
Let me try this another way.
Newbie here trying to create a test application that will perform a multi-row update of a table with a 3-column primary key.
I understand I can't use the built-in MRU processes since it appears they will only accept up to two (2) columns for a PK.
I don't have the ability to change the table constraints.
I am able to create the SQL report using my search criteria but I can't seem to figure out the connection between the user clicking on my 'Apply Changes' button and making the rows they've modified get committed to the database.
Any remedial guidance is greatly appreciated.
-garygwicke ,
<br>Your solution with concatenated value in one field as PK is woerse solution then my suggestion.
<br>1) Field is bigger then on PK with INTEGER based sequence. On large tables it may have some impact...and after all this is VARCHAR PK
<br>2) VARCHAR PK are several time slover in comparing then INTEGER like PK!
<br>3) Unique index (in my case) will be used when you query your data In a case of F1, F2 and F3 fields which are representing yours PK when you say
<br>
<br>WHERE value1=f1 and value2=f2<br>or
<br>ORDER BY F1, F2<br>oracle will know to use UQ index very efficiently and retrive data allmost as fast as possible.... on large tables or many concurent users this will have enormous impact on app performance!
<br>In your case, to get the same functionality as mentioned above, you should use "function index" (available only in EE versions of Oracle) or "INSTR, "SUBSTR" or "LIKE" or some other interesting string functions to compare value (regarding concatenated PK you've mentioned) with your PK.
<br>So I'm still standing on my first post and for me this thread is closed!
<br>P.S.
<br>With this post I think that we have cleared out one issue and you may find some other interesting question about database design and performance question opened. Many developers do not care for that...so sometimes apps crawle like dying cats....
Message was edited by:
[email protected] -
Does the anyone know if the IHandy flashlight app contain malware?? If so what are the removal steps to insure the malware is removed??
There is no malware that can affect an iPhone unless it's been jailbroken.
Some apps request to do things, like access your location or contacts, and can continue to do so in the background. If this app requested permission for either of these things, you should delete it. A flashlight app has no need for such information.
~Lyssa -
What are the best practices to migrate VPN users for Inter forest mgration?
What are the best practices to migrate VPN users for Inter forest mgration?
It depends on a various factors. There is no "generic" solution or best practice recommendation. Which migration tool are you planning to use?
Quest (QMM) has a VPN migration solution/tool.
ADMT - you can develop your own service based solution if required. I believe it was mentioned in my blog post.
Santhosh Sivarajan | Houston, TX | www.sivarajan.com
ITIL,MCITP,MCTS,MCSE (W2K3/W2K/NT4),MCSA(W2K3/W2K/MSG),Network+,CCNA
Windows Server 2012 Book - Migrating from 2008 to Windows Server 2012
Blogs: Blogs
Twitter: Twitter
LinkedIn: LinkedIn
Facebook: Facebook
Microsoft Virtual Academy:
Microsoft Virtual Academy
This posting is provided AS IS with no warranties, and confers no rights. -
What are the best practices to extend the overall lifespan of my MacBook Pro and its battery?
In general what are the recomended practices to extend the lifespan of my batter and other general practice to extend the lifespan and characteristics(such as performance and speed) like new on my MacBook Pro which this past fall (2011)?
About Batteries in Modern Apple Laptops
Apple - Batteries - Notebooks
Extending the Life of Your Laptop Battery
Apple - Batteries
Determining Battery Cycle Count
Calibrating your computer's battery for best performance
MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
Battery University
Kappy's Personal Suggestions for OS X Maintenance
For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior. Versions 1.5.1 and later are Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
SyncTwoFolders
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac Maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space. -
I don't regularly use any apps beyond Windows Live, Facebook, Skype etc. but app crashes are becoming frequent and this recent blackout was disturbing. What are the potential causes of this and how can I avoid them in the future?
it's weird , your device is not jailbreraked and it crashes? my device is jailbreaked and i almost have the same problems.
look, to avoid these problems:
1- dont open too much apps , and if you do , close them by multitasking menu.
2-try sometimes to turn off and on your device , its like refreshing ( called "respringing" in jailbreaked devices.
if you have the same problem , see an apple specialist.
plz mask as helphul question.
thanks. -
What are the security implications of having JAVA running on my Mac Book Pro?
What are the security implications of having JAVA running on my Mac Book Pro?
Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site. -
I am a cityville game player on facebook and for some reason today I am unable to send out blasted on the game when if fact this was never a problem. Finally I went to internet explorer and the same problem happen, but internet explorer let me know that the content was blocked. All I had to do was unblock it and that was easy and know I can blast out. However trying to remove the block from fire fox is a issue. I went into to tools and removed every block and it still want work right. Therefore, how to remove block from trusted web site. I did the obvious by pasting the web address in the allow content area under tools options. What are the other ways
Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because your issue is about ASP.NET website programming, I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/
for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
What are the advantages and disadvantages of suppressed and unsuppressed content?
what are the advantages and disadvantages of suppressed and unsuppressed content?
Hi Surya,
surya n wrote:
what are the advantages and disadvantages of suppressed and unsuppressed content?
Are you referring to compressed files in your statement?
If yes, then let me give you a general idea about it -
Compressed file occupy less memory space as compared to its uncompressed counterpart, and hence can be uploaded/downloaded faster than the uncompressed one.
Moreover Compressed files are less vulnerable to Malwares and Trojans, provided it is Locked and encrypted as well, Uncompressed files are more vulnerable to Malwares and viruses in general.
I would love to help you with your query however i need to know that in which context you are asking this question so that i can point you in the right direction. Moreover please let me know if you are facing any type of Technical issue in any Adobe Product or Online service.
Regards,
Rahul -
I am presently syncing my ipad for the first time.
i am at step 8 of 8
syncing 6228 photos.
it is taking a long time.
can I stop the procedure at this stage with no consequence.
if any what are the consequences.Do matters improve if you update to iPhoto 9.4.1?
iPhoto 9.4.1
From the release notes for the new version:
What's New in Version 9.4.1
Improves the reliability of syncing to iOS devices via iTunes
Fixes an issue that could cause iPhoto to quit unexpectedly when using the Export command
Addresses an issue that could cause iPhoto to quit unexpectedly when upgrading multiple books, cards, and calendars
Resolves an issue with downloading and viewing photos synced from Facebook albums -
What Are The Default Music Icons On iTunes 10?
What Are The Default Music Icons On iTunes 10?
So far I have:
Alternative
Blues
Classical
Country
Dance
Electronic
Folk
Christian & Gospel
Hip-Hop
Jazz
Latin
Pop
R&B
Reggae
Rock
Vocal
World Fusion
Which ones am I missing?the default apps would vary by region
this is whats in most models below
facebook
hi five
youtube
real player
ovi music
radio
bounce tales
these are whats on most models but they would vary by region and operator
some others would have extra or even less
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520 -
What are the mandatory fields while creation of material master in differen
what are the mandatory fields while creation of material master in different views?
Hi Gopi,
This is purely depends on the function configuration, which would be done MM consultants. Kindly check with them.
thanks & regards
Kishore Kumar Maram
Maybe you are looking for
-
Conflict in recording and filed mapping in LSMW For vendor balances
Hi, I am trying to create an upload for vendor initial balances upload through f-02. now while creating a simple invoice i have to give input in following fields: 1) Document date 2) Document type 3) Company Code 4) Posting Date 5) Posting Key 6) Acc
-
Having syncing problems after installing iPhone OS 2.0 for the iPod Touch
Ok, after finally installing the software on my iPod Touch 2nd Gen, I tried to sync it, and it only syncs my pix and apps. It will not sync my music nor videos. It read " an unknown error has occured. (error 13019). Has anyone else expericned this pr
-
Low-rez or no thumbnails in Cover Flow & Icon views!
Cover Flow used to display sharp and clear high-resolution jpeg previews, but now it display either low-rez previews for most or nothing at all for some. In Icon view, the Finder used to be able to generate thumbnails for jpeg files that don't have i
-
Look for cooperator if you have project!
-
Cisco Prime Infrastructure Operating System
I need some help here. I know that Prime Infrasturcture virtual appliance deployments are ESX and ESXi, but do I need to have Red Hat Linux Enterprise Server 5.4 64-bit also? This is getting confusing. Thanks. Todd Kelly