What are the specs for iPod video
i wish to manually convert .mov (video with audio) to vPod format.
anyone know where there is a list of the specs required, movie size, format, audio format?
i'm trying to figure out the following:
i have two movies of like nature. i drop ,them both in iTunes. i tell iTunes to convert for iPod and it says one does not need conversion. i am trying to figure out why the other does. they are both 44.1/h.264.
what is the movie size spec and all the specs for QT to vPod conversion? (i want do to it manually.)
i think i have it, is this correct: 320x180 (16:9). i assume vPod can play both 48.hz audio and that that does not have to be converted to 44.1 (both aac)?
QT Kirk is simply saying
you can make the file you dropped on the script in
order to make it uneditable editable once again by
loading the file in a hexidecimal editor utility and
"zeroing out" the code that makes it uneditable.
yes, i wanted to know which file to edit the script or the 'locked' movie --the .mov, thanks.
.mov
Format: AAC,Stereo (L R), 44.100kHz, H.264 Decoder,
391 x 216, Millions
FPS: 29.97
Data Size: 58.25
Data Rate: 536.90 kbits/sec
Normal Size: 391 x 216 pixels
Current Size: 391 x 216 pixels
(Actual)
The information cited does not include information regarding
the H.264 profile used to create it. If created using the QT
"Movie to QuickTime Movie > H.264" export option,
then the file would not be iPod compatible since this
workflow employs the "Main" profile. In a similar
manner, if the file was created using the QT "Movie
to MPEG-4" Export option, it would have been created
using either the "Main" or "Baseline" profile.
However, based on your dimensions, iTunes expects the
file to be created using the "Baseline Low Compexity"
profile and proceeds to correct the situation.
how can you do that via QTP expert options? if you can. i create a lot of web movies and wish to 'feed 2 birds with one piece of bread'. (i like birds.
if these are the only
conversion for iPod tools apple offers...
why?
QT Pro/iTunes currently
offers the use of two H.264 iPod compatible,
automatically adaptive workflows (Baseline LC and
Baseline) and QT Pro additionally offers one full
manual iPod compatible H.264 workflow (Baseline
profile) and one full manual MPEG-4 workflow. As to
why the QT "Movie to iPod" and iTunes workflows are
auto-adaptive, most users simply want to have iPod
compatible files when they want them and don't want
to learn how to make them properly with respect to
each compression format and/or profile requirement
and/or special case considerations (dimensions, data
rates, frame rates, key frame frequency, aspect
ratio, macroblock efficiency considerations, etc).
yes, i wish to... well, i said that above, create web and ipod in 'one fell swoop'. i suppose these ipod auto-adaptive modes will work for web, but i'd rather use the expert options. i would like to "learn how to make them properly".
> ok .m4v is h.264.
Rather loosely stated. The
".m4v" extension refers to the file container while
H.264 refers to the actual video compression
algorithm. In this case the H.264 video format is
specifically stored in this file container. One the
other hand, the ".mp4" file container is a more
generic MPEG-4 file container commonly used for
either MPEG-4 or H.264 (MPEG-4 AVC) video compressed
files. And, at the other end of the scale, the ".mov"
file container is the most generic since it can
basically contain any "supported" compression format
to include either MPEG-4/AAC or H.264/AAC iPod
compatible files. One key to remember here is that
file containers, like the compression formats that
they can contain, have specific "characteristics."
For instance, ".m4v" and ".mp4" file containers can
have one external piece of graphic "artwork"
associated with it (as seen in iTunes), but the
".mov" container cannot.
i did not know that .mp4 also served for h.264. the graphic container of .m4v i had sort of noticed, however i did not or had not for .mov, thanks.
Your file did not conform to
the required "Baseline LC" profile and so iTunes
converted it. Since the "LC" profile defaults to a
video data rate on the order of 1500 Kbps, your file
size was nearly doubled for the specific duration of
your clip.
i'm not sure i understand why my data rate was converted where a lesser data rate was not. (536 vs. 262)
thanks very much for this 'training'.
Similar Messages
-
What are the movie to iPod video settings?
I wonder, what are the exact video settings corresponding to selecting "Movie to iPod" when exporting?
The settings left to consider for Movie to MPEG-4 when using H.264 320 x 240 are:
Bitrate: ? kbps
Optimized for: CD / Fetch / Stream
Frame rate
Sync every ? frames
And the advanced video settings:
Limit description to: Main, Extended, Baseline
Encoding: Best / FastAfter a bit of testing I think that a video rate of 622 kbps is used when selecting the internal Movie to iPod export option.
This results in 750 kbps when audio is 128 kbps.
Short videos in iTunes Music Store use 622 kbps video rate (Michael Jackson Billie Jean and Bad, Pixar For the Birds).
Longer videos used 570 kbps video rate (Michael Jackson Thriller, ABC - Lost).
However my original question was what settings to use to match the Movie to iPod export option. -
can some one tell me the specs for the power adapter. Is there a manual available somewher on apple site for this computer?
Hi lllaass,
Thanks for your great answer.
That website link is for a1105. Is it same as a1103?
Also would you know if the power connection port is simlar to the one for appletv? I have an apple tv from 2007 which no longer works. Perhaps I can use that to power the mini.
Thanks again!
Avatariq -
What are the settings for capturing video from Canon HV20
Hi All,
I want to capture video from Canon HV20 with Premiere Elements 11. What kind of settings should I use to capture the video with full information?
Here is what I did:
1) According the manual, I went to Capture settings panel (Edit > Project Settings > Capture) and selected HDV as capture format, because my video is at high definition.
2) In addition, I checked "Capture to Timeline" and "Split Scenes by cotent".
Are these settings enough?
Thanks.HV20user
Sounds reasonable, using Add Media/HDV Camcorder, but....
Have you reviewed the Adobe write up on Premiere Elements 11 DV and HDV capture firewire into it.
http://help.adobe.com/fr_FR/premiereelements/using/WS5CDA0F91-60F1-4b79-ABF6-E9E75F498DB2. html#WS2AF26FB5-4C63-4c46-9DB3-7249558F6528
The mention of Get Media instead of Add Media makes me wonder if the video's instructor was demo'ing from Premiere Elements 10, but...
Major factors have always included having Premiere Elements project preset set correctly to correspond to your camera settings...For HDV data capture firewire...
NTSC HDV HDV 1080p30 or PAL HDV HDV 1080p25 depending on if you are targeting a NTSC or PAL area where frame rates are typically a consideration.
I had not done any DV or HDV data capture firewire into Premiere Elements. But, Premiere Elements 11's take over of the project preset setting would encourage me to encourage you to verify your project settings before the capture.
There are probably many more, but the following is online discussion of one Canon HV20 issue
http://forum.videohelp.com/threads/316970-video-capture-problems-HV20-camcorder-is-control led-but-no-video-capture
If you experience difficulty with the HDV capture fireware into Premiere Elements 11, you might consider what some others have done in this regard, that is, use HDVSplit for the capture firewire and then import the split (.m2t) clips "Add Media" into Premiere Elements 11 with the appropriate HDV HDV 1080p (1440 x 1080 HD anamorphic 16:9) project preset.
Please update us on your progress when you get a chance.
Thanks.
ATR -
What are the specs for the personal pictures for the startup me
I know it's 60-04, but I'm referring to index color, gray-scale, bit depth etc? I keep trying to get a picture in and it just shows up garbled. Any suggestions. I have the Zen Jukebox 40 GB. Will this version even do the picture thing. Any help is appreciated.
It must be 2 bit.
-
My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.
Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius -
What are the settings for Primere Elements 9 if I've filmed with a Canon Powershot sx50 HS?
I just got this camera and I want the best quality possible. Unfortunately, it's hard for me to fully know if the settings I try create that. I get a fuzz or noise on objects like if I'm wearing a black jacket it's like static. When I put the video on my phone which is an Android Galaxy s4 it converts it into mp4 format and I get much more clear results than on my computer which perplexes me. I did a lot of trial and error with my previous camera (JVC Full HD Everio) which I got the same results. My newer Canon should be leagues ahead of the JVC, but I really can't tell as of yet. If anyone could help that would be awsome. I have examples of my trials and errors from my Youtube videos which you can see I felt I was slowly making progress with the JVC Oppositeofhood - YouTube
Opposite
Then I saw your latest post
Wait, I think I just found it. I pressed record on different settings to take pictures with like portrait to see if it would make a difference and when I uploaded them to my computer I found where it shows the BIt rate and it varied. They run at 23 frames per second 1920 x 1080 MOV video files and all the Bit rates are like 36,356 35,414 ,36,521
If your camera is recording with a variable bitrate, the Bitrate variations from file to file should not be contributing to the issue. But it does raise the issue related to whether or
not we are setting the appropriate bitrate level in the export settings. What are the units for 36,356, 35,414, and 36,517 -
kbps (also can be written Kbps) and is kilobits per second
or
Mbps which is megabits per second.
Let us try this for one of your 1920 x 1080p24 videos.
Go through the following workflow
Manually set project preset...
NTSC
DSLR
1080p
DSLR 1080p24
When you go to export your edited Timeline content, then use
Share
Computer
QuickTime
with Presets = NTSC DV 16:9 - that is going to be customized to 1080p24 (H.264.mov) under the Advanced Button/Video Tab of that preset
The essential settings under the Advanced Button/Video Tab
Video Codec = H.264
Frame Width = 1920
Frame Height = 1080
Frame Rate = 23.976
Field Type = Progressive
Aspect = Square Pixels (1.0)
Now here is where we are going to experiment....
Bitrate
Check Mark next to Limit Data Rate to and type in 36000 before kbps
note the file size of the export as well as the quality of the playback.
Repeat the whole process but in export
Remove the check mark next to Limit Data Rate. The Bitrate field will be disabled.
note the file size of the export as well as the quality of the playback.
We will be watching for your results.
Thanks.
ATR -
What are the requirements for Dreamweaver?
What are the requirements for Dreamweaver? The link is broken
http://www.adobe.com/products/dreamweaver/tech-specs.html
Works for me...
Mylenium -
In Address Book, Lion, what are the checkmarks for when you Edit a Contact?
In Address Book for Lion, when you are in the Add/Edit a Contact window, what are the checkboxes for?
I am not seeing any checkboxes when I edit in Address Book in Lion, can you take a screen shot (Shift Command 4) of what you're seeing and post it?
BTW please fill out your profile (under Your Stuff above) so we know what machine and version of Lion you're using. -
What are the steps for loading master data
Hello
what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
if anyone has documents please send me the documents i will be really greatful
[email protected] thanks everyone
EvionHi Heng,
Download the data into a CSV file.
Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
http://www.sap-img.com/abap/vendor-master-upload-program.htm
Reward Points for the useful solutions.
Regards,
Harini.S -
What are the settings for datasource and infopackage for flat file loading
hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumarLoading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets. -
What are the settings for rework order quality inspection
HI,
Iam doing production order confirmation at the GR time some oprations are rejected.that operations i want too rework order CO07 process without GR ,i want to Quality inspection in REWork order.
What are the settings for rework order Quality inspection?Refer beautiful document
http://wiki.sdn.sap.com/wiki/display/HOME/ReworkInProduction -
WHAT ARE THE SETTINGS FOR AN ICLOUD EMAIL ACCOUNT
I am trying to create an iCloud email account on my iPad with IOS 6.0.1
what are the settings for Host name in incoming and outgoing mail servers?the information on that link doesnt work. my icloud address is [email protected] not [email protected].. although i tried both on my galaxy note 2. either way the server information is not verifying.
-
What are the settings for automatic service PO?
What are the settings for automatic service PO?
Hello,
I would like to know if it is possible to automatically create the PR for services. It would be similar to MD04 but instead of being for stockable materials, it would be done for non-stockable materials (services in this case).
PR would be generated monthly, because this services have to be paid every month, for example electricity, water, rent, phone bills.
I hope you can help me, thank you! -
What are the settings for Transport?
What are the settings for Transport?
u will get three panel in transport connection in BW side
here u need to collect object and drop them to 2nd panel
then u need to select whether u want o select all objects or only necessary objects
select as per ur requirement hten u need to write thse object in a NEw request
now executte nad go to Se10 and relaease sub task and main task
now ask basis team to impot it in QAS test it and again trnasport these to Production environemnt.
assign points if helps
Maybe you are looking for
-
Find my iPhone jumps all around?
Since we have several iOS devices and want to make sure we can find them should they get "misplaced", and also it's nice to be able for us to follow each other on long road trips to make sure we aren't stuck on a road somewhere in trouble. But on our
-
How to transfer itunes library to new computer
Got a new computer. I thought when I downloaded Itunes onto it that my music library would be available once I logged in but it is not. How do I get the my music from itunes onto this computer instead of my old computer I have already authorized t
-
OPENGL disabled with Intel HD Graphics 3000 384 MB
Macbook Air with Intel HD Graphics 3000 384 MB. When attempting to open 3D file Photoshop cc14.2.1 receive error message "Could not complete your request because 3D functionality is currently disabled due to OpenGL being disabled." Cannot enable OPEN
-
Mp3s playback broken in newest flash player
Hi I've been developing flash sites for many years. Many of them are dynamic. Recently since upgrading the Flash Player (9,0,115,0 installed) in my Firefox browser, a flash site I've built for my university work has broken. But the same site works fi
-
I would like to sell PSE 10. Can it cause problems to sell it in ebay? Of course de-activating, sending the bill,...