What are the standard datasource that are available in Solution manager?

Hi All,
Can you please tel me which datasource will contain data about SLA and incident management. The users are raising issues in SOLAR_*** Tcode and I dont know where it is getting updated.
Please reply me asap.
Thanks in advance!
Regards,
Ramanathan.R

Hello,
According to SAP Library Document for Solution Manager, Change Request Management offers you the following benefits:
·        Increased maintenance and project efficiency
·        Minimized costs for project management and IT
·        Reduced risk of correction and project failure
·        Shorter correction, implementation, and going-live phase
·        Efficient maintenance of customer developments and implementations
Personally, I find the greatest benefit to be centralized management of change requests for connected SAP Systems from start to finish - you can create transports, move transports, test transports, and confirm test results all centrally. This versus management of each individual system landscape separately.
This is my 2 cents.
Regards,
Robert

Similar Messages

What are the essential services that are required for ensuring server is healthy up ?

Hi All,
Please advise me What are the essential services that are required for ensuring server is healthy up ?
Warm regards,
jk1510

The easiest way to find the Health report of server or workstation follow the below steps which is very much easiest way to get it done
There are a few ways to find this in Windows Server 2008.
First click “Start” and type “Generate a system health report”
Or second navigate your way to the Control Panel choose “System and Security” and choose “Generate a system health report”.
The last is to type “Generate a system health report” into the “Search Control Panel” box in the upper right hand corner of the Control Panel window.
Once armed with this data it’s easier to refute or acknowledge an issue is at hand.
BTW if you’re looking for this same thing in Windows 7 it’s there just buried a bit more.
Search Performance in the Start Menu, choose “Performance Information and Tools”, click “Advanced Tools” from the menu on the left, and finally choose “Generate a system
health report”.
Ref: http://blogs.technet.com/b/rmontee/archive/2012/02/23/generate-a-system-health-report.aspx
Exchange Queries

Every time I synch my iPad I am told there are purchases to transfer. These are the same books that are transferred every time.

Every time I synch my iPad I am told there are purchases to transfer. These are the same books that are transferred every time.

"Motion 5" is your friend.
Michael Wohl has a nice 15 video series (free) about Motion 5 at http://www.macprovideo.com/tutorial/motion5101-overview-and-workflow-guide (right side)
This is a "teaser" series to sell his tutorials but it is really good. Just saw it yesterday for the first time.
While all you want is just to place pins, realize that Motion has so much more. All kinds of effects and they can be really customized. Maybe put their street address, contact name, and phone number by the pin?
Motion 5: cheap at $49.99 (just got my download two days ago)
Motion 5: Support Community athttps://discussions.apple.com/community/professional_applications/motion_5
If you're using the map for, say, deliveries, and use an iPad, what you could do is have a general map of the area imported into Motion, create the pins and whatever, then save (share?) it to the iPad.
Disclaimer: I have virtually no relationship with anything connected with this tutorial product, developer, or anything.

What are the main events that are used in an alvreport?

hi
experts can u help me for this

Hi
REUSE_ALV_EVENTS_GET
Description
This table tells ALV which events are processed by the caller by CALLBACK.
The table of possible events per list type can be initialized using the module REUSE_ALV_EVENTS_GET.
You can display the names of the constants in the type pools SLIS which represent the individual events using the individual test function in the function module
REUSE_ALV_EVENT_NAMES_GET. Only events with a form routine name are processed.
The table structure contains the fields:
     IT_EVENTS-NAME
Name of the Callback event.
Possible Callback events:
     Action
USER_COMMAND USING R_UCOMM LIKE SY-UCOMM RS_SELFIELD TYPE SLIS_SELFIELD
Process actions on the list
As this is a frequently-used Callback event, the form routine can also be passed directly in the interface in the IMPORTING parameter I_CALLBACK_USER_COMMAND.
PF_STATUS_SET USING RT_EXTAB TYPE SLIS_T_EXTAB
If a user list status is to be set, it must be done in the form routine assigned to this event. The ALV function codes, which must not be active, are in the Parameter RT_EXTAB. This table must be passed with the SET PF-STATUS command (with inactive user function codes as well, if necessary).
The STANDARD status of the function group SALV should be used as a template for a user-specific status.
As this is a frequently-used Callback event, its form routine can also be passed directly in the interface in the IMPORTING parameter I_CALLBACK_PF_STATUS_SET.
ITEM_DATA_EXPAND USING RS_SELFIELD TYPE SLIS_SELFIELD RFLG_ALL TYPE C
Only relevant for hierarchical-sequential lists using the layout parameter IS_LAYOUT-EXPAND_FIELDNAME of the structure IS_LAYOUT.
Exit for passing item entries (ITEM table) for a header record which was expanded interactively by the user.
RS_SELFIELD-TABINDEX contains the header table index for which the item entries are to be put in the global item output table (T_OUTTAB_SLAVE). The Callback is only called if ALV has no items for a header which is to be expanded.
RFLG_ALL is passed with 'X' if the user shows all items. The application must ensure that entries are not repeated in the item table. RS_SELFIELD is initial in this case.
CALLER_EXIT USING RS_DATA Is called at the beginning of the function module to make special settings. It is not usually used.
     List processing events
IMPORTANT: The application Callback routine must not manipulate the internal output table and/or its header record. This restriction applies to all Callbacks which are called in the list output and run under the 'List processing events'.
TOP_OF_LIST no USING parameter. Information output at the start of the list
END_OF_LIST no USING parameter. Information output at the end of the list
TOP_OF_PAGE no USING parameter
Equivalent to the list processing TOP-OF-PAGE event
END_OF_PAGE no USING parameter. Not available for hierarchical-sequential lists.
Information output at the end of a page. This is only called for printing.
TOP_OF_COVERPAGE no USING parameter
The selection information and list status are output together (if they exist) on a separate page by default. See also the documentation of the parameters:
IS_PRINT-NO_COVERPAGE
IS_PRINT-NO_PRINT_SELINFOS
IS_PRINT-NO_PRINT_LISTINFOS
IS_LAYOUT-GET_SELINFOS
The user can format the header area of the 'cover page' himself or herself by specifying a Callback routine for this event.
END_OF_COVERPAGE no USING parameter
Analogously to TOP_OF_COVERPAGE the user can add other information to the information output by ALV (selection information, list status) at this event.
FOREIGN_TOP_OF_PAGE no USING parameter
The Top-of-page event is always processed in ALV and is only passed to the caller via the Callback mechanism. This is still the case if the caller, e.g. by a user action, processes a branch list which was not formatted by ALV (e.g. a popup with additional information about the list record selected and displayed by ALV).
In this case, top-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event top-of-page still occurs in ALV. When ALV notices a top-of-page which was not caused by an ALV output, the form routine in FOREIGN_TOP_OF_PAGE is called.
FOREIGN_END_OF_PAGE no USING parameter
The event end-of-page is always processed in ALV and only passed to the caller via callback. This is still the case, e.g. when the caller processes a details list which was not formatted by ALV (e.g. a popup with further information about selected list records which were displayed by ALV).
In this case, end-of-page cannot be formatted by ALV analogously to the basic list, it must be handled completely by the caller. The event end-of-page still occurs in ALV. When ALV notices an end-of-page that was not caused by an ALV output, the form routine in FOREIGN_END_OF_PAGE is called.
BEFORE_LINE_OUTPUT USING RS_LINEINFO TYPE SLIS_LINEINFO
Output information before each output line. Should only be used in justified cases because it costs a lot of performance.
AFTER_LINE_OUTPUT USING RS_LINEINFO TYPE SLIS_LINEINFO
Output information after each output line. Should only be used in justified cases because it costs a lot of performance.
     Internal use only
LIST_MODIFY USING R_TABNAME TYPE SLIS_TABNAME
R_INDEX LIKE SY-TABIX
R_INDEX_ITEM LIKE SY-TABIX
R_INDEX_SUM LIKE SY-TABIX
     IT_EVENTS-FORM
Name of the form routine which should be called in the calling program at the event.
Field_catalog:
Field catalog with field descriptions
2.7.1.     Description
Field catalog containing descriptions of the list output fields (usually a subset of the internal output table fields). A field catalog is required for every ALV list output.
The field catalog for the output table is built-up in the caller's coding. The build-up can be completely or partially automated by calling the REUSE_ALV_FIELDCATALOG_MERGE module
See also the documentation of the function module REUSE_ALV_FIELDCATALOG_MERGE.
The minimal field catalog is documented under 'default'. The caller can use the other optional parameters to assign output attributes to a field which differ from the default.
A field catalog need not be built-up and passed explicitly only under the following conditions:
     The internal table to be output has the same structure as a Data Dictionary structure which is referred to in the internal table declaration using LIKE or INCLUDE STRUCTURE.
     all fields in this structure are to be output
     the structure name is passed to ALV in the parameter I_STRUCTURE_NAME.
See also the documentation of the IMPORTING paramter I_STRUCTURE_NAME.
Positioning
     row_pos (row position)
value set: 0, 1 - 3
Only relevant if the list output is to be multi-line (two or three lines) by default.
A multi-line list can also be defined by the user interactively if the default list is one-line.
The parameter specifies the relative output line of the column in a multi-line list.
     col_pos (column position)
value set: 0, 1 - 60
only relevant when the default relative column positions differ from the field catalog field sequence. The parameter specifies the relative column position of the field in the list output. The column order can be changed interactively by the user. If this parameter is initial for all field catalog entries, columns appear in the field catalog field sequence.
Identification
     fieldname (field name)
value set: internal output table field name (required parameter)
Name of the internal output table field which is described by this field catalog entry
     tabname (internal output table)
value set: SPACE, internal output table name
This parameter is used in 'manual' field catalog build-up only for hierarchical-sequential lists.
Name of the internal output table which contains the field FIELDCAT-FIELDNAME.
Data Dictionary reference
     ref_fieldname (reference field name)
value set: SPACE, Data Dictionary field name
Name of the Data Dictionary field referred to.
This parameter is only used when the internal output table field described by the current field catalog entry has a reference to the Data Dictionary (not a program field), and the field name in the internal output table is different from the name of the field in the Data Dictionary. If the field names are identical, naming the Data Dictionary structure or table in the FIELDCAT-REF_TABNAME parameter is sufficient.
     ref_tabname (reference table/structure field name)
value set: SPACE, name of a Data Dictionary structure or table
Structure or table name of the referred Data Dictionary field.
This parameter is only used when the internal output table field described by the current field catalog entry has a Data Dictionary reference (not a program field).
Reference to fields with currency/measurement unit
Each internal output table sum or quantity field whose decimal places are to be formatted appropriately for the unit in the list must follow the convention:
     the field is of data type QUAN or CURR (internal type P) (the field must really have this physical data type. Overwriting the physical data type with the parameter FIELDCAT-DATATYPE has no effect)
     There is a field in the internal output table which contains the associated unit.
     There is also an entry in the field catalog for the unit field.
(If the unit is not to appear as a column in the list, and cannot be interactively displayed as a column, e.g. because it is always unambiguous and is therefore explicitly output by the caller in the list header, the field catalog units field entry can take the parameter FIELDCAT-TECH = 'X'.
The association of a value field to a unit affects the output as follows:
     appropriate decimal places display for the unit
     an initialized field with a link to a non-initial unit is output as '0' for the unit (if FIELDCAT-NO_ZERO is initial). When this field is summed, this unit affects whether the units are homogeneous.
     an initialized field with a link to an initial unit is output as SPACE. When this field is summed, the unit SPACE does not affect the homogeneity of the units.
     When non-initial fields with an initial unit are summed, the unit SPACE is considered to be a unit.
Link to currency unit
     cfieldname (currency unit field name)
value set: SPACE, output table field name
Only relevant for amount columns with associated unit.
Name of the internal output table field containing the currency unit associated with the amount field FIELDCAT-FIELDNAME. The field in FIELDCAT-CFIELDNAME must have its own field catalog entry.
     ctabname (internal currency unit field output table)
value set: SPACE, output table field name
only relevant for hierarchical-sequential lists
Name of the internal output table containing the FIELDCAT-CFIELDNAME field.
Link to measurement unit
     qfieldname (measurement unit field name)
value set: SPACE, output table field name
only relevant for quantity columns with unit link.
Name of the internal output table field containing the measurement unit associated with the quantity field FIELDCAT-FIELDNAME.
The field in FIELDCAT-QFIELDNAME must have its own field catalog entry.
     qtabname (internal measurement unit field output table)
value set: SPACE, output table field name
only relevant for hierarchical-sequential lists
Name of the internal output table containing the FIELDCAT-QFIELDNAME field.
Column output options
     outputlen (column width)
value set: 0 (initial), n
For fields with a Data Dictionary link this parameter can be left initial.
For fields without a Data Dictionary link (program field) the parameter must be given the value of the desired field list output length (column width).
initial = column width is the output length of the referred Data Dictionary field (domain).
n = column width is n characters
     key (key column)
value set: SPACE, 'X'           'X' = kex field (key field output in color)
Key fields can not be interactively hidden. Parameter FIELDCAT-NO_OUT must be left initial.
For exceptions see the documentation of the FIELDCAT-KEY_SEL parameter.
     key_sel (hideable key column)
value set: SPACE, 'X'
only relevant when FIELDCAT-KEY = 'X'
Key field which can be hidden interactively.
The key column sequence cannot be changed interactively by the user.
The output is controlled by the FIELDCAT-NO_OUT parameter analogously to non-key fields.
     no_out (field in field list)
value set: SPACE, 'X'          'X' = field is not displayed in the current list.
The user can interactively choose the field for output from the field list.
The user can display the contents of these fields at line level using the 'Detail' function.
See also the 'Detail screen' documentation of the parameter IS_LAYOUT.
     tech (technical field)
value set: SPACE, 'X'          'X' = technical field
Field cannot be output in the list and cannot be displayed interactively.
Field can only be used in the field catalog (not in IT_SORT, ...).
     emphasize (highlight columns in color)
value set: SPACE, 'X' or 'Cxyz' (x:'1'-'9'; y,z: '0'=off '1'=on)
'X' = column is colored with the default column highlight color.
'Cxyz' = column is colored with a coded color:
     C: Color (coding must begin with C)
     x: color number
     y: bold
     z: inverse
     hotspot (column as hotspot)
value set: SPACE, 'X'
'X' = column cells are output as hotspots
     fix_column (fix column)
value set: SPACE, 'X'
Not relevant for block lists (output of several lists consecutively)
'X' = column fixed (does not scroll horizontally)
All columns to be fixed must have this flag, starting from the left. If a column without this flag is output, only the columns to the left of this column are fixed. The user can change the column fixing interactively. See also the documentation of the Layout parameter
IS_LAYOUT-NO_KEYFIX of the IMPORTING paramter IS_LAYOUT.
     do_sum (sum over column)
value set: SPACE, 'X'           'X' = a sum is to be calculated over this internal output table field.
This function can also be called by the user interactively.
     no_sum (sums forbidden)
value set: SPACE, 'X'          'X' = no sum can be calculated over this field, although the data type of the field would allow summing.
     input (column ready for input)
Function not available
Format column contents
     icon
value set: SPACE, 'X'           'X' = column contents to be output as an icon.
The caller must consider the printability of icons.
     symbol
value set: SPACE, 'X'          'X' = column contents are to be output as a symbol.
The internal output table column must be a valid symbol character.
The caller must consider the printability of symbols.
Symbols can usually be printed, but may not always be output correctly, depending on the printer configuration.
     just (justification)
value set: SPACE, 'R', 'L', 'C'
Only relevant for fields of data type CHAR or NUMC
' ' = default justification for this data type
'R' = right-justified output
'L' = left-justified output
'C' = centered output
The justification of the column header always follows the justification of the columns. Independent justification of the column neader is not possible.
     lzero (leading zeros)
value set: SPACE, 'X'
Only relevant for fields of data type NUMC
ALV outputs NUMC fields right-justified without leading zeros by default.
'X' = output with leading zeros
Note: If a NUMC field is output left-justified or centered by FIELDCAT-JUST, leading zeros are output. If the output of leading zeros is suppressed by a Data Dictionary reference ALPHA conversion exit, the output is always left-justified.
     no_sign (no +/- sign)           Only relevant for value fields
value set: SPACE, 'X'     'X' = value output without +/ sign
     no_zero (suppress zeros)           Only relevant for value fields
value set: SPACE, 'X'          'X' = suppress zeros
     edit_mask (field formatting)
value set: SPACE, template
template = see documentation of WRITE formatting option USING EDIT MASK template
The output conversion conv can be made by template = '== conv'.
Texts
The following text parameters should be specified for program fields without a Data Dictionary reference. The texts are taken from the Data Dictionary for fields with a Data Dictionary reference. If this is not desired, the text parameters can also be specified. The Data Dictionary texts are then ignored. If the user changes the column width interactively, the column header text with the appropriate length is always used. The interactive function 'Optimize column width' takes account of both the field contents and the column headers: if all field contents are shorter than the shortest column header, the column width depends on the column header.
The 'long field label' is also used in display variant definition, sort, etc. popups.
     seltext_l (long field label)
     seltext_m (medium field label)
     seltext_s (short field label)
     reptext_ddic (header)
analogous to the Data element maintenance 'Header'
The specified text is not necessarily output in the list, an optimum among all texts is sought.
     ddictxt (specify text)
value set: SPACE, 'L', 'M', 'S'
You can specify with values 'L', 'M', and 'S', the keyword that should always be used as column header. If the column width changes, no attempt is made in this case to find an appropriate header for the new output width.
Parameters for program fields without Data Dictionary reference
see also 'Text' parameters
     datatype (data type)
value set: SPACE, Data Dictionary data type (CHAR, NUMC,...)
Only relevant for fields without Data Dictionary reference
Program field data type
     ddic_outputlen (external output length)
value set: 0 (initial), n
Only relevant for fields without Data Dictionary reference whose output is nevertheless to be modified by a conversion exit.
Prerequisites:
     FIELDCAT-EDIT_MASK = '==conv'
see also the documentation of the parameter FIELDCAT-EDIT_MASK
     FIELDCAT-INTLEN = n
see also the documentation of the parameter FIELDCAT-INTLEN
n = external format field output length
The column width FIELDCAT-OUTPUTLEN need not be the same as the external format output length (FIELDCAT-DDIC_OUTPUTLEN).
     intlen (internal output length)
value set: 0 (initial), n
Only relevant for fields without Data Dictionary reference whose output is nevertheless to be modified by a conversion exit.
Prerequisites:
     FIELDCAT-EDIT_MASK = '==conv'
see also the documentation of the parameter FIELDCAT-EDIT_MASK
     FIELDCAT-DDIC_OUTPUTLEN = n
see also the documentation of the parameter FIELDCAT-DDIC_OUTPUTLEN
n = internal format field output length
     rollname (data element)
value set: SPACE, Data Dictionary data element name
F1 help can be provided for a program field without a Data Dictionary reference, or F1 help which differs from the Data Dictionary help can be provided for a field with a Data Dictionary reference, using this parameter.
When F1 help is called for this field, the documentation of the specified data element is displayed.
If the FIELDCAT-ROLLNAME is initial for fields with a Data Dictionary reference, the documentation of the data element of the referred Data Dictionary field is output.
Others
     sp_group (field group key)
value set: SPACE, CHAR(1)
Field group key.
Keys are assigned to group names in the IT_SPECIAL_GROUPS parameter (see also the documentation of the parameter IT_SPECIAL_GROUPS).
When such an assignment is made in the field catalog and in IT_SPECIAL_GROUPS, the fields are grouped correspondingly in the display variant popup.
     reprep (Report/Report interface selection criterion)
value set: SPACE, 'X'
Prerequisites:
     The system contains the Report/Report interface (function group RSTI, table TRSTI)
     Parameter LAYOUT-REPREP = 'X'
(see also the documentation of the parameter LAYOUT-REPREP of the IMPORTING parameter IS_LAYOUT )
'X' = When the Report/Report interface is called, the value of this field is passed in the selected interface start record as a selection criterion.
2.7.2.     Default
     The following entries are usually sufficient for internal table fields with a reference to a field defined in the Data Dictionary :
     fieldname
     ref_tabname
Notes:
ALV gets the remaining information from the Data Dictionary.
If no relative column position (COL_POS) is specified, the fields are output in the list in the order in which they were added to the field catalog.
REF_FIELDNAME need only be specifid when the name of the internal table field differs from the name of the referred Data Dictionary field.
Information which is explicitly entered in the field catalog is not overwritten by information from the Data Dictionary.
Priority rule:
Entries in the field catalog have priority over differing entries in the Data Dictionary.
     The following entries are usually sufficient for internal table fields without a reference to the Data Dictionary (program fields):
     fieldname
     outputlen
     datatype
     seltext_s
     seltext_m
     seltext_l
Notes:
F1 help can be provided for program fields by assigning a data element to the parameter ROLLNAME.
If the parameters SELTEXT_S, SELTEXT_M, SELTEXT_L, and REPTEXT_DDIC contain appropriate field labels, the program field column headers are also adjusted appropriately when the column width changes.
<b>Reward points for useful Answers</b>
Regards
Anji

What are the white spots that are showing up on screen?

I have a mid 2009 unibody and have noticed recently that I have 2 white spots on the screen. One is almost centered and the other is half way up on the rigth hand side. They are only noticiable on light backgrounds. I can also see on at the bottom right starting. It is very faint, but still shows on a white background.
I am out of warrenty so I'm wondering how much it might cost to fix, or if it is just something that I can live with and the problem won't get worse.

Dick,
To be honest I don't know what program they are related to. However If the files are located in ~/Library/Preferences (Where is ~ = your home directory) Then You should be safe in moving/deleting them, at worst you will have to reset the settings in one of your apps. What that folder is mainly used for is say for example you have your dock show/hide it self. That will be saved to a plist file in the preferences folder. If you delete or move the dock's plist out of there your dock on your next login will go back to the default view of Mac OS.
Now To be honest you don't have to move/delete those files that are there, especially since at most you will probably reset some of the preferences you set in an application. But its up to you. Also you could always move it first to see what app it is and either move it back or delete it later.
Hope that helps,
Weston

What is the best accessories that are under £30?

I have £30 to spend what is the bast accessorie to get?

Sounds to me like you don't really lack anything so you could add to your music and video collection, or you could put it your 30 pounds in money market or what have you, wait for it to compound in value than have money to by the next version of the latest and greatest apple iPod or ipad5 (the life force) which no doubt you will be drooling and venting for when we come down the road to it.

What are the standard bex analyzer reports available?

hi all
what are all the std reports available for fico? sd and mm?
thanxs in advance
regds
hari

Hi,
This is the best way...and the simplest way....since it is a big question....just go Business content tab in RSA1 and there go to "query elements" option and cick on the option "select objects" this will give you all the standata BW queris based on all the BC cubes and it will not show self developed queries in you system.
So fo MM reports go to...Infoarea "Supply Chain Management"-> "Inventory Management"....here you will see all the cubes related to MM and the reports nased on that.
for FICO go to Infoarea FMCO Financial management and controlling.........
Similarly you can find for SD.
If you want to find the detailed information about all the queries .....you will have to search the help.sap.com witth the same name of the cubes and you will get various links explaining that.
Thanks

Songs start after beginning of song and end before the song is finished. these are the same songs that are on my IPodtouch and they play in their entirety there. So what's the problem with listening to them on Itunes on my Mac computer?

The music on Itunes on my MacBook start into the song; not from the beginning. The song also ends before it should. I have this same music on my IPodtouch and they play from beginning to end. Why don't they play the total song on ITunes on my MacBook? Anyone know???

Hello flashgoddess
It sounds like you have a crossfade turned on. Check the Playback tab in iTunes Preferences to see if anything is selected that would give that kind of behavior.
iTunes 11 for Mac: iTunes Playback preferences
http://support.apple.com/kb/PH12260
Thanks for using Apple Support Communities.
Regards,
-Norm G.

So where are the real photos that are used between iPhoto and iMovie?

OK....this is getting ridiculous...
So where the heck does iMovie and iPhoto really store and pull the images from cause this makes no sense...
I will try and make this is a shorten version of a long story...Here is what I am dealing with...
G5 with iLife 06 and all updates...
Powerbook Pro with iLife 06 and all updates...
Spent five days editing project on my Macbook Pro --> emptied trash and bye bye project...Started over on my G5 since none of my clips are editable now (Thanks Apple! I needed that)
I had previously spent a week editing over 200 photos in Photoshop on my Macbook...This included color correction and dust and scratches as well as some retouching...So I transferred all Photos onto my G5 from my Macbook Pro and imported into Library...New discovery...Photos look like crap now...Like they were never cleaned up at all...Interesting...
So I start redoing some of these retouches and save them...Of course the changes are not reflected in iPhoto or iMovie since it doesn't really use the originals again after the initial import...Or does it?
So now here is another baffling thing to me...I do red eye correction to some photos and it is an immeditate change that can be seen in iMovie when importing...But if I rotate the pictures, no...sorry that only seems to take effect after I rotate the original in Photoshop and then reimport into my iPhoto library and delete the duplicates that have now gotten created in the process...
Can someone help me understand what is going on...This added work is giving me a headache...Where and how does iPhoto store and use the images? Why if i rotate a photo it doesn't take effect in iPhoto/iMovie unless I completely reimport, but I can remove red eye instantly...And what has happened to all the changes I made to the existing photos to remove the dust and scratches originally?

All images must be in a project. You can place then in as many albums as you wish- even albums outside the project where they reside- but they will remain in the project.
Move the images to the album. Then drag them over the project where the album resides and they will be moved to that projects. If you drag them to an album and not the project, they will remain in the original project.
Kinda hard to wrap your head around at first, but you'll see that it makes perfect sense as you progress with the application.
DLS

WHERE are the add-ons that are already installed on my computer????????

''dupe of https://support.mozilla.org/en-US/questions/916146''
Firefox 3.6
Mac OS 10.4

scottjason918,
contact your school’s IT support department. Since your school requires that that program be installed on your Mac, they’re the ones who are responsible for its well-being on your Mac.

What is the standard DS for daily expenses?

Hi
What is the standard DataSource for daily expenses?

Hi Imran,
Please post your query under the following link, so that you can get quick response.
https://scn.sap.com/community/data-warehousing/business-content-and-extractors
Thanks,
Karan

For Delivery Performance what are the standard report available n SAP?

For Delivery Performance what are the standard report available n SAP?

hi
If you wanna know the SD report just go to SAP1 transaction code from easy access( it works only from easy access) and you will find entire reports available in SAP. Then select what is relevant to you. And as you asked any material on reports, so I have some good material on it and will surely send you tonight.
And Some of the Standard reports in SD are given below check it out for convenient however always better to chek above told transaction code:
Sales summary - VC/2
Display Customer Hierarchy - VDH2
Display Condition record report - V/I6
Pricing Report - V/LD
Create Net Price List - V_NL
List customer material info - VD59
List of sales order - VA05
List of Billing documents - VF05
Inquiries list - VA15
Quotation List - VA25
Incomplete Sales orders - V.02
Backorders - V.15
Outbound Delivery Monitor - VL06o
Incomplete delivery - V_UC
Customer Returns-Analysis - MC+A
Customer Analysis- Sales - MC+E
Customer Analysis- Cr. Memo - MC+I
Deliveries-Due list - VL04
Billing due list - VF04
Incomplete Billing documents - MCV9
Customer Analysis-Basic List - MCTA
Material Analysis(SIS) - MCTC
Sales org analysis - MCTE
Sales org analysis-Invoiced sales - MC+2
Material Analysis-Incoming orders - MC(E
General- List of Outbound deliveries - VL06f
Material Returns-Analysis - MC+M
Material Analysis- Invoiced Sales - MC+Q
Variant configuration Analysis - MC(B
Sales org analysis-Incoming orders - MC(I
Sales org analysis-Returns - MC+Y
Sales office Analysis- Invoiced Sales - MC-E
Sales office Analysis- Returns - MC-A
Shipping point Analysis - MC(U
Shipping point Analysis-Returns - MC-O
Blocked orders - V.14
Order Within time period - SD01
Duplicate Sales orders in period - SDD1
Display Delivery Changes - VL22
These are all main standard reports as well I am again repeating that it's better to check all reports from above said transaction code.

What are the standard Solutions available for Complaints Management in CRM?

Dear all,
What are the standard solutions available in SAP CRM to receive and process complaints through Customer Interaction Center.
Our requirement is to receive and register complaints from contact center and process them by integrating back end ECC and BIW systems.
As per my understanding we can not integrate ECC transactions in CASE Management while CASES are being created through Interaction Center.
Please help me to map the following requirement successfully into SAP.
How to register the complaint through Interaction Center?
How this complaint information is communicated in back end ECC system?
How to track the status and solution of the complaint available in back end ECC system?
How the complaints are stored in ECC system?
After creation of a complaint, can we trigger an automatic email on back end ECC system user with all complaint relevant data?
Kindly help me to understand the process.
Best regards,
Raghu ram.

You can analyse this [link |http://help.sap.com/saphelp_crm60/helpdata/en/68/691976cd2ef845a4e62437a82b67df/frameset.htm]for more information. Additionaly the tree hierarchy links contain some process flows where it explains you briefly the big picture of the process, in standard SAP CRM Complaint Manaagement Scenario.
BR,
Cenk Sezgin

What are the standard IDOC's available in IDES? where can i see in IDES?

Dear All,
Can any body let me know what are the standard IDOC's available in IDES? What is the path for the same?
Thanks in advance for replies
regards
srikanth

Hi,
IDOCs are intermediatery Documents, we can check for IDOCS using Tcode
WE01 : Create IDOC
WE02 : Display IDOC
WE19 : Reprocess IDOC
etc
Thanks
Kalyan

How to know on what tables the standard bw datasource are built in ECC

Hi Guys,
How do we know on what tables the BW DataSource are built in ECC.
Thanks & Regards
Jagannadha Raju

Hi Raju,
check in below link which will give details of the datasources and associated tables.
http://help.sap.com/saphelp_nw70/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
Hope this helps.
Regards,
Reddy

What are the standard datasource that are available in Solution manager?

Similar Messages

Maybe you are looking for