What are the steps in RMAN Backup & Recovery 10 G

Hi All
Please list out What are the steps in RMAN Backup & Recovery 10 G
Regards

Take a look at the user guide or at the getting started section, dba core tasks - backup and recovery.
C.

Similar Messages

What are the steps applying incremental backups to standby database 11g

Hi All,
I have built 11g none ASM standby database from ASM RAC Database. Now I want to apply incremental backup to the standby database from primary but not sure how to do it. I tried following and I had an error “ORA-01103: database name 'ins-prim' in control file is not 'ins-sec'”
1- I have configured standby database with RMAN backup.
2- After finishing installation, I took a incremental backup from primary server(ins-prim) and moved incremental backup and control file to the standby (ins-sec) database
3- I stared standby database nomount mode
4- restore controlfile from “incremental backup location in standby database”
5- alter database mount; and got this error
“ORA-01103: database name 'ins-prim' in control file is not 'ins-sec'”
What are the steps applying incremental backups to standby database with 11g?
Thank you

I build the database from backup and changed from ASM to none ASM and changed location of data files and logfiles. I think this changes makes the standby database as logical one.
You can a have a physical standby with different locations for everything (redo/controlfiles/datafiles), ASM and no ASM etc. I have a such a configuration in production (10gR2)
I build the database from backup
Are you sure you have a standby ? Ins-sec receives the archivelog files from the primary ? How did you proceed to build this database ? I suspect you don't have a standby at all ! If you have duplicated the database ins-sec and ins-pri are independent databases and you won't be able to apply an incremental backup (your script was not correct but it is another story)

I accidentally deleted my media files from iTunes and Trash when I was trying to move the files to an external hard drive. Is there a way to restore the media files from a Time Machine backup or from iTunes Match? What are the steps to do this?

I accidentally deleted my media files from iTunes and Trash when I was trying to move the files to an external hard drive. Is there a way to restore the media files from a Time Machine backup or from iTunes Match? What are the steps to do this?

If you have been backing up on Timemachine.
All you need to do is enter time machine... Then the rest is obvious.
Find the iTunes folder and hit 'Restor'.
If not the only way to get all your iTunes music back is to enter iTunes Store.
On the right hand side you should see 'Purchased'.
Click 'purchased' and there you have it.

What are the steps for using the backup files to reload data to my blackberry curve (8310, i think)?

What are the steps for using the backup files to reload data to my blackberry curve (8310, i think)?

Connect BB to PC. On 'Desktop Manager'>Backup & Restore tab>Click Restore. Double click .ipd file (backup file created from Desktop Manager).

What are the steps are Shared services backup and schema back

Hi
I am new in Hyperion .. can anybody tell me what are the steps are in the shared services back up and schema back up ...
Regards
Praetorian

If it is fora a demo i would advise you to extract all the files (metadata, Rule, Security, Data forms, Grids, ICP reports, Data etc) so that this can be restored on any machine from which you wish to give demo.
If you which to take database backup it will take backup of all the HFM applications in that server. And when you restore the backup it will refresh all the applications which might result in changes to other applications which you may not want.
For taking backup of database/schema go to the udl file and identify the schema for which you wish to take backup.
Then type the command to take DB backup.
Kindly mark the post helpful if you find so.
Varun
Edited by: Varun Kaushal on Apr 24, 2010 9:37 AM

What are the steps in oracle 11g DBREFRESH

Dear Techies,
Please help me on below. I followed all steps in db refresh
I have done till
Alter database open resetlogs
status is open
what are the steps remaining in oracle 11g dbrefresh from PRD to QTY. is there any post steps to drop old ops$users.
Please let me know.
Thank you
Best Regards
RJ

Hi Gurpal,
Thank you for your valuable reply
Do I need to do your mentioned steps after below steps
RECOVER DATABASE USING BACKUP CONTROL FILE UNTIL CANCEL;
AUTO.
once recovery is done CANCEL.
Alter database open resetlogs.
status is open.
AS YOU MENTIONED
Make sure listener and DB should be up.
Determine Schema Owner
SQL> SELECT OWNER FROM DBA_TABLES WHERE TABLE_NAME = 'T000';
Check the OWNER of “SAPUSER”
SQL>SELECT OWNER FROM DBA_TABLES WHERE TABLE_NAME = 'SAPUSER';
Create OPS$ User
Use the oradbusr.sql script. This script is attached to the note 50088. The script is valid for Oracle and UNIX. Use the following syntax
SQL> @ORADBUSR.sql SAPR3 UNIX (SID) X
Check the OWNER of “SAPUSER" after exceute command
SQL>SELECT OWNER FROM DBA_TABLES WHERE TABLE_NAME = 'SAPUSER';
If the system returns an owner <owner> other than OPS$<sid>ADM (OPS$SIDADM) of PRD, you must
delete the relevant SAPUSER tables:
SQL> DROP TABLE “OPS$SIDADM".SAPUSER;
and after that check the output of (R3trans -d)
set the value in profile parameter
To ensure no background jobs after the start (Rdisp/wp_no_btc =0)
(Login/no_automatic_user_sapstar =0 )
or Any table spaces need to be create ???? PSAPTEMP ??? or any.
Thanks & Regards
RJ

What are the steps to change the name on the "House" in the side bar on OSX Mavericks?

What are the steps required to change the name on the "House" in the side bar for OSX Mavericks?

You want to change your username. First, make a backup of your files with Time Machine, as any error may damage your user.
Then, follow these steps to change your username > http://support.apple.com/kb/ht1428 Be very careful, as it requires to log in as root

What are the steps i need to follow to refresh the database

Hi Team,
I am the junior DBA first time i need to do Database Refreshment on UNIX platform.
1. Database Names are different and mount points are diffrents.
2. Synonyms and dblinks are should be retained.
How to do this and what are the steps i need to follow.
Please suggest any one.
Regards,
Venkat.

Venkat wrote:
Hi,
Version is Oracle 10g.
Venkat..Start here: http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmconc2.htm#i1006532

What are the steps if; the disk cannot be partitioned because some files cannot be moved

I'm to install windows XP software, and I can partition the disk. If state, "The disk cannot be partitioned because some files canot be moved." What are the steps to complete partition to install windows XP?

Ok what happens with Bootcamp is it needs to carve out a contiguous free space at the bottom of your hard drive.
If it can't do that then it can't make the partition.
What has happened is there are some files down in closer in the bottom part of the drive, this occurs if you've had a hard drive nearly full, performed a software update, installed programs and then removed some files leaving parts and large empty spaces.
So what to do to fix this?
Well your going to have to learn how to clone your OS X boot partition, with all your programs and files to a external drive, which you can then hold the option key and boot from it.
Then you run Disk Utility from the clone, erase the OS X partition on the internal drive and clone everything right back.
This will place everything in order, move everything up and nice and compact at the top of the drive, which will allow you to make a BootCamp partition as big as you have room for.
It will also make your comptuer perform a bit faster too.
Cloning back and forth is rather safe, because you always have a hold option key bootable clone, either on the internal drive or the external drive, your computer will work from either.
What you don't want to use is Defrag software, that moves things around while the computer is running and messes things up quite a bit and really doesn't optimize as well or as safely as a clone.
In fact I just assisted a person who did just that and royally messed up their machine, requiring a complete rebuild of everything.
So read through this thread of mine and grasp things and you'll be cloning your boot drive in no time.
https://discussions.apple.com/message/16276201#16276201
Remember that cloning can't clone Filevaulted drives or Bootcamp partitions, also it only (at this time) clones the OS X partition, which for Snow Leopard is the whole drive usually (minus Bootcamp partition.)
However if your on Lion, Carbon Copy Cloner doesn't quite yet clone the hidden Lion Recovery Partition, so when you clone you won't have it on the external drive but the computer will boot off the external drive just fine without it.
So when you go to erase the Lion internal drive, you need to erase only the OS X Lion Partition not the entire drive before reverse cloning.
You should make a Lion Recovery USB if you have Lion, as only through Lion Recvoery can you reinstall Lion now. Instrucitons are in my thread.
The way you can tell if your selecting a partition or a entire drive in Disk Utility is how far left it is.
The far left are devices and the slightly indented items are partitions or media using that device.
Good Luck

What are the steps for a clean reinstall of the os?

I have updated to mavericks from mountain lion and well to say the least, my 2011 macbook pro has been running slower than what it should be. I have been reading forums that other people are having problems as well and was able to fix some of them by doing uninstalling their os and reinstalling it for a clean install. So my question is what do i need to do before i reinstall the os, will my files be safe? Also what are the steps i need to take to reinstall the os?
Im honestly thinking about just going back mountain lion, this update adds nothing for me than it being free and the extra batery life, which i havent noticed, but when it takes forever to open up itunes or switch tabs in safari or open up word, theres a problem. Anyways can anybody help me out here?

A clean install means you'll have to re-install all third party apps from scratch and migrate nothing. Your files will not survive a clean install, so be sure you have a good backup to copy them back after.
Are you sure the issue is with the system and not just something in your user account? Have you tried logging into your Guest account and see how it works, or try starting in Safe Mode and see if the problem still occurs?
Restart holding the "shift" key.
(Expect it to take longer to start this way because it runs a directory check first.)

Currently running OSX 10.6.8 and Safari 5.1.10. What are the steps to update my IMAC?

I'm currently running OSX 10.6.8 and Safari 5.1.10. What are the steps to get my IMAC totally up-to-date?

Back up your data, check your applications for compatibility, and download Yosemite from the Mac App Store.
(116042)

How do I unlock an iphone 5 with Sprint. The SIM is in and Sprint gave me the unlock code, but what are the steps to unlock it?

How do I unlock an iphone 5 with Sprint 15.1 at IOS 7.0.6 IMEI 99 000320 012095 0 .
The SIM is in and Sprint gave me the unlock code, but what are the steps to unlock it?

There is no such thing as an unlock code. Sprint may have processed the unlock, and then requested you restore the iPhone using iTunes to complete it. But that's it. There is no code to enter, and nowhere to enter it any way.
iPhone: About unlocking

How do i get my apple ID from my old iphone 5 to my new iphone 6 ? what are the steps? because last time i tried getting my apple ID from my old to new phone it all went wrong and i could not sign in or use imessage? thanks

How do i get my apple ID to work from my old iphone 5 to my new iphone 6? what are the steps? as last time i tried this everything went wrong my imessage would not work and it would not let me sign in?

Try TransPhone, it's working fine, but a bit expensive...
After installing this, you'll Be able to send/recieve music, contacts, text messages, photos and Videos over bluetooth. Works fine with all mobile phones and computers...
I may receive some form of compensation, financial or otherwise, from my recommendation or link
<Edited by Host>

What are the steps would liket take using AR,AP,GL Datasource in R/3

Hi,
When i would like to use SAP content data source Like ,AR,AP,GL
data source what are all the master data need to activate for this.
Ex: for AR we need to activate the Customer master data
what abt AP,GL what are the master data need to be activated while using SAP content data source in R/3.

<i>What are the steps i need to do in source system?.First of all identify the data source and what are the master data need to be used for the data source like AP,AR,GL in R/3.</i>
Find out what Cubes, ODS's will be used - > HELP.SAP using the datasource.
Activate transaction datasources.
See Infosource Overview and activate relevant master datasources in RSA5 - ECC.
Install content on BI side.
It doesnot matter what datasources you activate first, it is just a preferred way to load transaction data only after master data.
<i>What are all the masterdata need to activate before going to activate AR,AP,GL data source in R/3.</i>
Infosource Overview

What are the steps need to be taken care for MM data sources while extrac

what are the steps need to be taken care for MM data sources while extracting from R/3 tables
and please provide the Steps involved in R/3 side
thnaks
Racha

Hi,
For Inventory Management, you can have a look at the following link.
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]

What are the steps in RMAN Backup & Recovery 10 G

Similar Messages

Maybe you are looking for