What are the Steps to assign Public IP ?

Hi,
I want to assign Public IP address to my OEL. What are the steps for it.
Regards,
Ajay

Ajay Sharma wrote:
I want to assign Public IP address to my OEL. What are the steps for it.Do you have an IP address to assign? The public IPv4 address range is exhausted. So no ISP is simply going to give customers static public IPs to use.
An ISP typically has a DHCP server and a pool of public IPs that are handed out to clients when connecting. With local hosting contracts/accounts, one may get a static IP allocated to you - but expect to pay extra for that.
The usual configuration is to configure your router for making the ISP connection and getting an IP on the Internet. You then configure your LAN devices to use the router as default routing gateway.
If you want to host a web server for example on a LAN device, you should consider using a NAT firewall on the router (supported by most in my experience). For example, your router has LAN IP 192.168.0.1. Your LAN web server has IP 192.168.0.20. The ISP address allocated to your router is 42.42.7.123.
On the router you configure port 80 to be NAT'ed to 192.168.0.20 using port 80. This means an Internet connection to 42.42.7.123 will be passed by the router to your web server.
Of course, as the public IP is leased by your router, it can expire, and a new public IP address given when the lease is refreshed. So you cannot exactly give out a DHCP IP to Internet users to connect to your web server. The solution is dynamic DNS. Again, many routers support this - automatically telling the dynamic DNS service what the current public IP address is for your web server's Internet hostname. This hostname you need to register with the dynamic DNS folk (and pay for) - and allows you to have an Internet presence via a dynamic public IP.
Even if you are lucky enough to have your own dedicated public Internet IP - I suggest NOT using without very CAREFUL consideration. This IP will be attacked by hackers. Not might be. Will be. It will be probed for weaknesses. Weaknesses will be exploited. Fact.
So if you want to assign a public Internet IP to your Linux server, you MUST harden the server. Latest patches. Service management. Solid iptables configuration. Consider running SELinux in fully active mode. Constant monitoring of server logs.
Most of which a router will protect you against with a much easier and simplistic web admin interface - and by protecting your servers via NAT.

Similar Messages

  • What are the steps  needs to be perform to define a data model

    What are the steps  needs to be perform to define a data model
    a.     Information Gathering 
    b.     Hardware & Software
    c.     Structure the Information – MDM
    d.     Transfer into a Physical Model – BW data model
    e.     Explore use of existing model – Business Content

    Hi Siva,
         Very first activity is Proof of concept (POC), here we have to show How BW works for clients Reporting requirement during POC we as BW consultants need to creat some sample BW back end objects and also some reports based on business requirement. This is very crucial stage as Client Judge wethere BW would meet his demands. If every thing is fine then next step is Bidding.
    After Bidding the contract then actual Project intiates. from here we follow ASAP methodology.
    <u><b>
    Project Preparation</b></u>
    Here Senior Consultant would go to Client place for Business Process Transistion and to know in what way the Architectue should be set up so here Basis People will come into picture.
    <u><b>Blue Print</b></u>
    Transistion could be understood by BRD (Business Requirement Documents) BRD states what is exact requirement and it is given by End users.
               By seeeing thr BRD's we as BW consultants must prepare APPlication Design Documents . The Application Design Documents states all the Technical aspects that needs to be performed as BW backend and also as well as Frontend.
    <u><b>Realization Phase</b></u>
      Here as BW consultants we must start confuguring as mentioned in ADD's by taking care of all performance aspects, once all the configuration are done we do Unit testing. unit testing is an activity where we check all the design process wether it running correct or not. After unit testing we move the design objects to Qulaity for Integration Testing.
    <u><b>Testing</b></u>
        Here end user will check all the objects, reports on end to end basis. after integration testing is done then UAT ( User acceptance Testing) would come into picture where user check each process and sign off.
    <u><b>Go live</b></u>
    Here all the object will be moved to Production where end users and power users can start working on the system. intially for some days Development team would be taking care of all support activites there after  it will be transitoned to support team.
    Hope It helps you.
    Assign Points if it usefull
    Regards
    Sujan

  • What are the steps to configure Fund Management in Plant Maintenance

    Hi Friends,
    while creating Plant Maintenance order through T code iw31.
    In the main menu     Go to-Assisments----Fund management.
    now this Fund management is in grey mode.
    What are the steps i need to carry to make it active mode.
    Please suggest
    Thanks in advance

    Dear
    Ask with your Co person either they activated fund mgt. This is thier Job u can activate your order types for commitmente check at KOAB.
    Ask them to look at SPRO--PUBLIC SECTOR MGT
    Also at SPRO-CONTROLLING-INTERNAL ORDERS-BUDGET AND AVAILABLITY CONTROL
    You also check at your OIOA.
    thenna

  • What are the steps for integration FI to PP

    hai
    what are the steps for integration with FI to PP
    Thanks & regards,
    PG BABU

    Hi,
    Integration is with CO and PP
    In CO, Cost Centers are Created using T.code KS01.
    In CO, Activity Types are created using T.Code KL01.
    Both should be combined Using T.code KP26.
    Cost Centers are assigned to Work Centers using T.Code CR02.
    Please let me know if you need more information.
    Assign points if useful.
    Regards
    Sridhar M

  • What are the steps in cin

    hi genius
    This question asked by tcs what about cin, what are the steps in cin .  What is
    the use of cin, I told cin consist of j1nfac ,j1nexp, j1nedp,j1nstk but he is asking
    how do u configure by step by step  how do u do in ides step by step  can any one help

    Dear nag nageshwar, 
    Country Version India comes with four pricing procedures as follows:
    • JINFAC (Sales from manufacturing plants)
    • JINEXP (Export sales)
    • JINDEP (Sales from depots)
    • JINSTK (Stock transfers
    CIN:
    IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
    Maintain Excise Registrations
    Use
    In this IMG activity, you maintain the data relating to your excise registrations.
    Activities
    Enter each of your excise registrations, specifying a four-character code for each
    Excise Registration IDs
    In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
    Activities
    For each excise registration in your business create a registration ID, and state:
    • Which taxes the registration covers (additional excise duty, special excise duty, and cess)
    Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
    • The maximum number of items to be printed on each excise invoice
    • Whether you are allowed partial CENVAT credits
    Maintain Registration ID NUMBER, Excise code number, excise registration number
    Excise Registration Number
    A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
    Every entity with an excise registration number is required to keep its own excise books.
    ECC Number
    Specifies the organization's ECC number.
    Excise Registration Number
    A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
    Every entity with an excise registration number is required to keep its own excise books.
    Excise range: Specifies the excise range in whose area the excise registration is located.
    Excise Division
    Specifies the excise division in whose area the excise registration is located.
    Excise Collectorate
    The code of the excise collectorate in whose area the excise registration is located.
    Indicator for confirming AED usage
    Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
    Example
    Additional Excise duty is leviable in case of textile products, tobacco and sugar.
    Similarly for SED CESS
    Number of Items in Excise Invoice
    Shows the maximum number of line items that the authorities allow per excise invoice.
    Dependencies
    This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
    This information is used to split the transfer postings' items into multiple subcontracting challans.
    Excise register set description
    Description of the excise registers set.
    Partial CENVAT Credit
    Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
    Dependencies
    When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
    This information is also shown when you post the vendor's excise invoice.
    Maintain Company Code Settings
    Use
    In this IMG activity, you maintain the data relating to your company codes.
    Document Type for CENVAT Postings
    It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
    Indicator for providing debit account overwriting
    Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
    Automatic balance Indicator
    Excise year start month
    The calendar month marking the beginning of the excise year
    Use
    This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
    Excise invoice selection procedure
    Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
    Number of excise invoices to be selected
    Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
    Days to be considered for excise invoice selection
    Number of days from document date for excise invoice selection.
    Example
    If the value of this field is 20 and today is 28-03-97. The excise
    invoice selection will show the related invoices only for the
    period 08-03-97 to 28-03-97.
    Document type for TDS FI posting
    Financial accounting document type for TDS posting.
    Document type for FI posting on Utilisation
    Financial accounting document type for TDS posting.
    Indicator for item level excise duty round off
    This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
    Rounding off of Excise duty for outgoing excise invoice
    You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
    Immediate Credit on Capital Goods
    Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
    The rest is posted the CENVAT on hold account, for use in the following year.
    CVD Clearing Account
    Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
    Exchange rate type
    Key representing a type of exchange rate in the system.
    Use
    You enter the exchange rate type to store different exchange rates.
    Example
    You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
    Exchange rate type to be used for Export excise duty converts
    When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
    Maintain Plant Settings
    Use
    In this IMG activity, you maintain excise information relating to your plants.
    Plant Settings
    In this activity, you maintain excise information relating to your plants.
    Activities
    For each plant:
    • Specify whether it is a manufacturing site or a depot.
    • Assign it an excise registration ID.
    You can assign the same ID to more than one plant, if required.
    Depot
    Indicates that the plant in question is a depot.
    Dependencies
    Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
    Number of goods receipt per excise invoice.
    Multiple GR for one excise invoice, Single credit
    Multiple GR for one excise invoice, Multiple credit
    Maintain Excise Groups
    Use
    In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
    Excise Groups
    In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
    Recommendation
    Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
    If your company has only one set of excise registers, then you need to maintain only one excise group.
    Activities
    1. Create one excise group for each set of registers that you need to keep.
    1. Assign the excise groups to plants.
    2. Maintain whether this Excise group is for a depot or not.
    3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
    4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
    5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
    6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
    7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
    8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
    9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
    10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
    11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
    Excise Group
    Governs which set of excise registers a business transaction will be included in.
    Following is the relation between excise group, plant and registration.
    Dependencies
    In define excise groups in Customizing.
    Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
    At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
    Indicates that the plant in question is a depot.
    Dependencies
    Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
    GR Per Excise Invoice
    Multiple GR for one excise invoice , Multiple credit
    Multiple GR for one excise invoice , Single Credit
    Create Excise Invoice Automatically
    Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
    The excise invoice is created in the background.
    Dependencies
    If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
    RG23D Sales Creation and posting option
    RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
    If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
    If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
    Default excise qty in GR
    If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
    Folio number for depo
    Posting
    If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
    Also we can set indicator for creation of part 1 for:
    Blocked stock
    Stock transport order
    Consignment stock
    Maintain Series Groups
    Use
    In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
    Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
    Activities
    • Define excise series groups based on type of outgoing document
    • Assign series group to excise registration ID
    • If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
    • If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
    Example
    You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
    No account postings for CENVAT in sales cycle
    No utilization Flag
    If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
    IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
    Immediate Utilization of CENVAT
    Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
    If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
    Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
    Maintain Excise Duty Indicators
    Use
    In this IMG activity, you maintain the excise duty indicators.
    IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
    Select Tax Calculation Procedure
    Use
    In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
    • If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
    • If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
    This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
    We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
    Maintain Excise Defaults
    Use
    In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
    Activities
    If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
    If you use formula-based excise determination, fill out all of the fields as follows:
    • Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
    • Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
    • Specify the conditions in the sales order that are used for excise rates.
    • Specify the countervailing duty condition type used for import purchase orders.
    See also
    SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
    IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
    Condition-Based Excise Determination
    Use
    When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
    Features
    The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
    Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
    When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
    Activities
    Customizing
    Make the settings in Customizing Basic&#61614; India &#61614;for Logistics – General, by choosing Taxes on Goods Movements Account&#61614; Excise Duties Using Condition Technique and … &#61614;Settings Determination.
    These activities include one activity where you define a tax code for condition-based excise determination.
    Master Data
    Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
    Day-to-Day Activities
    When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
    When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
    Creating Condition Records for Excise Duty
    1. In the command field, enter FV11 and choose .
    2. Enter the condition type that you want to create a condition record for and choose .
    The Key Combination dialog box appears.
    3. Select the combination of objects that you want to create the condition record for.
    On the dialog box, Control Code means "chapter ID."
    So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
    4. Choose .
    5. Enter data as required.
    In the Tax Code field, enter the dummy tax code that you have defined.
    6. Save the condition record.
    Formula-Based Excise Determination
    Use
    When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
    Prerequisites
    In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Data&#61614;access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.&#61614;
    You maintain the following types of data:
    • Plant master data
    You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
    See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
    • Vendor master data
    For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type – for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
    For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
    • Customer master data
    Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
    Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
    • Material master data
    Each material is assigned a chapter ID.
    • Excise tax rate
    For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
    If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
    Activities
    Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
    1. Looks up the customer master data to see what status you have assigned the customer.
    Let's assume you've assigned the customer status 3.
    2. Looks up the plant master data to see what status you have assigned the plant.
    Similarly, your plant has status 2.
    3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
    4. The system determines the chapter ID of the ball bearing for the plant.
    Let’s assume the chapter ID at plant for the ball bearings is 1000.01.
    5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
    Define Tax Code for Purchasing Documents
    Use : In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
    Only carry out this activity if you use condition-based excise determination.
    Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
    Assign Tax Code to Company Codes
    Use
    In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
    Only carry out this activity if you use condition-based excise determination.
    Classify Condition Types
    Use
    In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
    The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
    In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
    • For taxes on purchases, use the condition types contained in the tax procedure.
    • For taxes on sales, use the condition types contained in the pricing procedures.
    Standard settings
    The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
    Use these settings as a basis for your own.
    IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
    Define G/L Accounts for Taxes
    Use
    In this IMG activity, you specify which G/L accounts you will use to record which taxes.
    Requirements
    You have set up G/L accounts for each of the processing keys listed below.
    Activities
    Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
    • VS1 (basic excise duty)
    • VS2 (additional excise duty)
    • VS3 (special excise duty)
    • VS5 (sales tax setoff)
    • MWS (central sales tax)
    • MW3 (local sales tax)
    • ESA (service tax)
    • ESE (service tax expense)
    Specify Excise Accounts per Excise Transaction
    Use
    In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
    If you use subtransaction types, enter the accounts for each subtransaction type as well.
    Activities
    Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
    The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
    Example
    Excise TT DC ind Account name
    GRPO CR CENVAT clearing account
    GRPO CR RG 23 BED account
    GRPO DR CENVAT on hld account
    Specify G/L Accounts per Excise Transaction
    Use
    In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
    When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
    • Excise group
    • Company code
    • Chart of accounts
    Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
    Requirements
    You have already:
    • Defined the G/L accounts
    • Defined the excise groups
    • Maintained the transaction accounts
    Activities
    For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for alltransactions.
    Note
    You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
    Config setting needed to be done in order to get the Excise Details Screen in Material Master.
    Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
    Following document helps you to do this configuration.
    &#61664; Material Master &#61664; Logistics General &#61664;1. Go to IMG Define Structure of Data Screen for each&#61664;Configuring the Material master Screen Sequence.
    2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
    3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is “Foreign Trade: Import Data”. Select the same and click on Subscreens in the left frame.
    4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
    5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 – 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
    6. Save the setting.
    7. Create a Material Master and check whether in Screen Foreign Trade – Import, Excise related subscreen appears.
    Hope this helps you.
    Do award points if you found them useful.
    Regards,
    Rakesh
    P.S. you can send me a mail at my mail id [email protected] for any specific details

  • Currently running OSX 10.6.8 and Safari 5.1.10. What are the steps to update my IMAC?

    I'm currently running OSX 10.6.8 and Safari 5.1.10. What are the steps to get my IMAC totally up-to-date?

    Back up your data, check your applications for compatibility, and download Yosemite from the Mac App Store.
    (116042)

  • How do I unlock an iphone 5 with Sprint. The SIM is in and Sprint gave me the unlock code, but what are the steps to unlock it?

    How do I unlock an iphone 5 with Sprint 15.1 at IOS 7.0.6 IMEI 99 000320 012095 0 .
    The SIM is in and Sprint gave me the unlock code, but what are the steps to unlock it?

    There is no such thing as an unlock code.   Sprint may have processed the unlock, and then requested you restore the iPhone using iTunes to complete it. But that's it. There is no code to enter, and nowhere to enter it any way.
    iPhone: About unlocking

  • How do i get my apple ID from my old iphone 5 to my new iphone 6 ? what are the steps? because last time i tried getting my apple ID from my old to new phone it all went wrong and i could not sign in or use imessage? thanks

    How do i get my apple ID to work from my old iphone 5 to my new iphone 6? what are the steps? as last time i tried this everything went wrong my imessage would not work and it would not let me sign in?

    Try TransPhone, it's working fine, but a bit expensive...
    After installing this, you'll Be able to send/recieve music, contacts, text messages, photos and Videos over bluetooth. Works fine with all mobile phones and computers...
    I may receive some form of compensation, financial or otherwise, from my recommendation or link
    <Edited by Host>

  • What are the steps would liket take using AR,AP,GL Datasource in R/3

    Hi,
    When i would like to use SAP content data source Like ,AR,AP,GL
    data source what are all the master data need to activate for this.
    Ex: for AR we need to activate the Customer master data
    what abt AP,GL what are the master data need to be activated while using SAP content data source in R/3.

    <i>What are the steps i need to do in source system?.First of all identify the data source and what are the master data need to be used for the data source like AP,AR,GL in R/3.</i>
    Find out what Cubes, ODS's will be used  - > HELP.SAP using the datasource.
    Activate transaction datasources.
    See Infosource Overview and activate relevant master datasources in RSA5 - ECC.
    Install content on BI side.
    It doesnot matter what datasources you activate first, it is just a preferred way to load transaction data only after master data.
    <i>What are all the masterdata need to activate before going to activate AR,AP,GL data source in R/3.</i>
    Infosource Overview

  • What are the steps need to be taken care  for MM data sources  while extrac

    what are the steps need to be taken care  for MM data sources  while extracting  from R/3 tables
    and please provide the Steps involved in R/3 side
    thnaks
    Racha

    Hi,
    For Inventory Management, you can have a look at the following link.
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]

  • What are the steps for loading master data

    Hello
    what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
    if anyone has documents please send me the documents i will be really greatful
    [email protected] thanks everyone
    Evion

    Hi Heng,
    Download the data into a CSV file.
    Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
    http://www.sap-img.com/abap/vendor-master-upload-program.htm
    Reward Points for the useful solutions.
    Regards,
    Harini.S

  • What are the steps to make it seamless for a customer to use the install program and then use the installed program?

    I wrote an install program (.exe) that is downloaded from a website.  When run, it 1) leads a customer to browse to a directory, and 2) copies files (.exe, .dll, etc.) from a website to that directory.  When I run, the installed program works.
    What are the steps to make it seamless for a customer to use the install program and then use the installed program? 
    bhs67

    This site https://msdn.microsoft.com/en-us/library/vstudio/2kt85ked%28v=vs.110%29.aspx provides a basic description of the Visual Studio Windows Installer. 
    Near the bottom of the page is "You can unlock all the features of InstallShield by paying to upgrade to the full version of InstallShield."  Where do I find info that describes the differences between the "free" and the "full"
    versions?
    bhs67
    Hello,
    The default feature does support the task for your requirement, so there is no need to pay for the other features unless you want to use some feature which is not free.
    In addition, as this thread
    InstallShield LE not available with VS 2012 RTM? shared, even through there is a link to InstallShield LE in the New Project dialog under Deployment solutions, but it belongs to third-party that I would recommend you consider posting this issue
    at the following forum to get supports about InstallShield.
    http://community.flexerasoftware.com/forumdisplay.php?133-InstallShield
    Regards.
    Carl
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?

    Hello All,
    What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?
    Navigation
    Bob Sales manager<Ebiz form<service request tab<SR type<DFF<additional information for agents <cheque number
    The field Cheque number Character allowed (, -) in the DFF Additional Information for Agent should only take numbers
    Thanks & Regards
    Ayesha

    Thanks Sridar
    If we use Number we cannot separate the cheque numbers with , or -
    We need to enter numbers along with comma and '_' in cheque number field.
    Thanks & Regards
    Ayesha

  • What are the steps to change the name on the "House" in the side bar on OSX Mavericks?

    What are the steps required to change the name on the "House" in the side bar for OSX Mavericks?

    You want to change your username. First, make a backup of your files with Time Machine, as any error may damage your user.
    Then, follow these steps to change your username > http://support.apple.com/kb/ht1428 Be very careful, as it requires to log in as root

  • Hi i have  an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india

    hi i have  an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india

    Only the carrier to whom the device is locked can authorize it's unlocking.  Contact the carrier to see if they offer unlocking and if you qualify.

Maybe you are looking for