What are the supported uplink modules in the WS-C3850-48F-L?

Our company has two offices, but the distance between them is a little far. I want to connect the network between the two offices with fiber, But our company is using Cisco Catalyst 3850 Switches , So what are the supported uplink modules
in the WS-C3850-48F-L?

The WS-C3850-48F-L supports the following uplink modules:
4 x 1GE network module C3850-NM-4-1G=
2 x 1/10GE network module C3850-NM-2-10G=
4 x 1/10GE network module C3850-NM-4-10G=
http://www.3anetwork.com/cisco-ws-c3850-48f-l-price_p1839.html

Similar Messages

What is the Supported wifi module for hp dv6-6154tx

What is the supported wifi module part number of wifi card number for hp dv6-6154tx . I lost it somewhere when I tried to add thermal compound on processor. Help me plz

Hi,
These are the part numbers of the wireless card which are suitable for your unit from the below link.
http://h10032.www1.hp.com/ctg/Manual/c02842252.pdf
Look for page # 67.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

IPhoto says themes are missing and it won't print. All the support says to reload the application but I didn't get disks with the iMac. What do I do now.

iPhoto says themes are missing and it won't print. All the support says to reload the application but I didn't get disks with the iMac. What do I do now.

This is the ipod touch forum.
Try posting in the ipod nano forum.

I've read that Promise Pegasus2 series does not sell replacement parts. I'm buying the new MacPro but am concerned about spending $2K for storage that may break and cannot be fixed. What are others buying for storage for the new MacPro?

I've read that Promise Pegasus2 R6 thunderbolt 2 series does not sell replacement parts (no replacement parts for any of the Pegasus line). I'm buying the new MacPro but am concerned about spending $2K for storage (12tb version) that may break and cannot be fixed (am told that one must purchase a new unit if a part breaks). What are others buying for storage for the new MacPro? Thanks so much for your help.
Discussion about this issue at MacWorld.com: http://www.macworld.com/article/2082783/first-look-promises-pegasus2-r6-thunderb olt-2-raid-array.html

I've used the original Pegasus R6 units for a couple of years now and have been very pleased with them. On the two occasions I've had to call on their technical sujpport, I've found them readily available, knowledgeable, and very helpful. In one case it involved the reset of a unit after a power failure at an inopportune time; in the other case it was a question about upgrading disk drives to higher capacities (1 Gb gto 4 Gb). I was pleased to learn that their tech support people were in California and as good if not better than upper-tier AppleCare reps. The hardware itself has functioned flawlessly so far.

What are Apple doing to compensate for the damage caused by the iPhone 4 bumper?

I have noticed damage caused by the bumper.
It is NOT foreign object but caused by the hard plastic on the inside of the bumper
(plese do not come out with rubbish like steel is harder than plastic) I am not stupid and I know that the damage matches the pattern of the bumper skeleton.
What I want to know is when are Apple going to deal with this and replace my phone?
I dare not go to the so called Genius bar in Milton Keynes as they have adopted a Dixons style "fob off" attitude and I will become rather angry with them.

Re: What are Apple doing to compensate for the damage caused by the iPhone 4 bumper?
15-Jun-2011 15:15 (in response to sfrommilton keynes)
o Steel is harder than plastic, so the bumper has not caused the damage.
- You call it rubbish
- The world calls it physics
You are totally wrong. Please go back to School.
o You can deny physics
- but that will not change reality.
You can go to School but that wont change reality.
o Your description of your Genius bar is incomprehensible
- I recommend you go to the Genius bar leaving the chip on your shoulder at home and tactfully explain what you think is your issue.
I recomend you find a day job ans stop TROLLING peoples threads.
- I've never had them fail me or be the least bit confrontational.
- But if you act like a jerk then I couldn't predict what would happen
Yeah because you were there. Are you having some kind of relationship with the company? I think you sleep with an Apple under your pillow.
Finally I am a consumer who has paid for a product that is not living up to expectations. The plastic skelton is hard and abrasive (I know what that means as I went to School) Abrasion's are marking the product.
This is not the only time this has been reported and as such I have no issue with particles entering the bumber. This has happened from the start (when I used Apples stupid bumber case)
Please don't patronise or TROLL others threads.
<Edited by Host>

Features that are not supported by Excel in the browser and interactive reports will be removed from the saved copy

I Created a power view in Excel 2013 and uploaded to my Power BI for o365 site.
But when i click on my excel file it opens in browser,After that i click on File tab its showing me two option
1. Save a Copy
2.Download a copy
When i click on save a copy its showing me an warning below
Features that are not supported by Excel in the browser and interactive reports will be removed from the saved copy.
Continue with Save?
If i continue saving it only saves an excel files with data only not the power view which i want to save with applied filters.
Please help me for this

Just to clarify, when you hit the option of Save As Copy, the whole experience goes into a "read-write" mode in Excel services, which currently doesn't support authoring, just consumption of PowerView sheets.
Two mitigations that come to mind:
1. Download the copy (as Brad suggests), rename the file and upload.
2. Use the send to option of SharePoint online, give the file the right target document library (can be the same as source) and rename the file:
GALROY

What are all scenarios we will open the database in open resetlog mode

what are all scenarios we will open the database in open resetlog mode..please advise

Another situation I could think of is that when the active/current online redo logs are lost.
Regards,
Jaffar

PE 5.0.2 - Could not load the FastCore Routines module because the file could not be found.

The "view and organize photos" mode seems to work just fine, but when I attempt to open the "edit and enhance photos" mode, I get an error box with this message: "Could not load the FastCore Routines module because the file could not be found", and then it shuts down after I click ok. I have installed the 5.0.2 patch and have uninstalled and reinstalled the program, to no avail. I had no firewall running when installing the program, nor do I own the program "Clean Sweep". What can I do?
Thanks for any help
OS = Windows Vista.

CANNOT LOAD FASTCORE ROUTINES, MMX CORE ROUTINES,
           MULTIPROCESSOR SUPPORT NOT FOUND
          SUCCESSFULLY REPAIRED - STEP BY STEP
I made the repair for Elements 5 on an XP version Operating System PC by doing this:
I went to....
Start / All Programs / Accessories / Windows Explorer
and selected.....
My Computer / C:
which is my drive with its operating system where Photoshop is installed.
I then clicked....
Documents and Settings
Then - in each - of the three icons I found.....
All Users, Default User, and Owner
I went into....
Application Data / Adobe / Photoshop Elements
In that last file I removed ALL the contents.... IN EACH !
After rebooting, my Photoshop Elements 5 started to work.
I think with research and all I invested five hours. May this save you 4 1/2.
I was paranoid and put the contents of each file into a new file I identified
clearly in case it I have to replace one of the parts out in the future.
I hope this is of help to some future reader.
Other comments here seem to indicate that this solution has
worked in version 4 and up and fixed early versions of Vista.
This appears to be a common problem after a drive repair or partitioning.
Why they can't just tell us this is a mystery to me.
-- Bon Courage! --
                                  Ken

How to find out the inbound function module in the extended idoc

Hi,
how to find out the inbound function module in the extended idocs
Thanks .

through we41/we42 you can find the inbound function module.......
or
thorough we19(idoc test tool) ....
give the input as message type or basic idoc..
press exec...
then you can find th button on application tool bar as inbound funtion module....
from here also you can find..........
<REMOVED BY MODERATOR>
Khasimsa
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 1:34 PM

[svn:fx-trunk] 11488: Resubmitting binary distribution of xercesPatch. jar from the third party module in the SDK and compiled it with Sun JDK 1.4 .2_12.

Revision: 11488
Author:   [email protected]
Date:     2009-11-05 17:10:10 -0800 (Thu, 05 Nov 2009)
Log Message:
Resubmitting binary distribution of xercesPatch.jar from the third party module in the SDK and compiled it with Sun JDK 1.4.2_12.
QE notes: N/A
Doc notes: N/A
Bugs:
SDK-16818 - Must open-source the code for xercesPatch.jar.
Reviewer: Discussed with Gordon
Tests run: Checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-16818
Modified Paths:
    flex/sdk/trunk/lib/xercesPatch.jar
    flex/sdk/trunk/modules/thirdparty/xerces-patch/build.xml

Did you try this:
http://forum.java.sun.com/thread.jsp?thread=434718&forum=60&message=1964421

What are you considering non responsive with the plugins? Flash player is working just fine then I get your crash page in the middle of doing something. You say it only crashes when it's been unresponsive for 45 seconds. Mine is crashing in less then 1

I have had problems with firefox crashing for the last three month. I have updated to the latest version with the crash protection. Now the flash player crashes about every 20 minutes or so. On your blog page you state that I will get the crash page when the plugin has been non-responsive for 45 seconds well with mine the games are going along just fine then wham crash page. Flash player was responding and you gave me crash report anyway. What's up???? Flash player is crashing within seconds not 45 seconds!!!!!!!!!!!!!!!!! Your check plugin page always states that my plugins are UP TO DATE!!!!!
== This happened ==
Every time Firefox opened
== three months ago and getting worse with every upgrade you send!!!!!!!!!!!!!!!!!!!!!!!

'''''"I have had problems with firefox crashing for the last three month."'''''
You need to investigate the cause of your crashes that started prior to the release of the first Firefox version that offered crash protection, version 3.6.4, released in mid to late June 2010; that is just over one month ago.
<u>'''The crash protection feature does not prevent a plugin from crashing, it prevents the whole Firefox browser from crashing because of a crashing plugin; only the tab with the crashing plugin crashes.'''</u>
For information about report plugin crashes see: http://support.mozilla.com/en-US/kb/Plugin+crash+reports
You need to post the crash Report IDs for the crashes occurring over the last 3 months. To do so, type '''about:crashes''' in the URL/location/address bar, then copy and paste the Report IDs (only) into your reply. See: http://support.mozilla.com/en-US/kb/Firefox+crashes#Getting_help_with_your_crash
In addition, please do the following. Type '''about:support''' in the URL/location/address bar, on the screen presented, click "Copy all to Clipboard" and paste that into your reply.

What Home Router Supports VPN Endpoints for the iPod Touch?

Hello,
I'm trying to figure out what VPN Endpoints I can use for remote access to my home network. I'd prefer a hardware VPN router like a Linksys BEFSX41, or a D-Link DIR-330. I'd prefer something like the DLink since it supports local area wireless as well.
I want to know if anyone has used any of this equipment, and how well it worked. There seems to be surprisingly little info on getting VPN to the home, let alone the iPod.
Can anyone recommend a router which will perform as a VPN end point for me?
UHF.

You might be facing the problem, because the Ipod and your Desktop computer must be having the same IP address thats the reason whenever your IPod is connected to your Network, your Desktop must be getting disconnected. Check the IP address of your IPOD and of your Desktop Computer.
First thing which you need to check, if the Physical connections are done properly. Connect the Modem to the Internet Port of the Linksys Router and then Connect the computer to the LAN Port No.1. On your Desktop computer login to the setup page of your Router and click on the Status tab and check "Internet IP address"
If required you can Re-Set your Router and Re-configure all the settings on your Router from the scratch.

What are we supposed to do when the magic mouse stops working?

Everything was fine last night, until my mouse again lost it's connection. The light was blinking fine, but no connection, I changed batteries (even tho the ones inside showed nearly a full charge), still wouldn't work. I realized, ok, now what? Shouldn't Apple include a corded mouse, for back-up, should the bluetooth one screw up, die, or for whatever reason, not work any longer?
Again, I felt totally frustrated, couldn't even look up the local Apple Store number, (too late to call tech help), or do anything! *** is someone supposed to do? I thought I may have an old, wired mouse somewhere, as I had just moved. Well, somehow I found it, plugged it in, but it didn't work either (I think that tiny, all-too-fragile wire had frayed a bit), so I was really frustrated & helpless feeling. Remembered I had bought the trackpad, so I pulled that out. Well, talk about confusion, the directions talked about first downloading the software, running software update, etc, before trying to connect it!
Since I had no way to do that (I know there's some way to navigate the monitor window, using only the keyboard, but while I tried what I could, I couldn't do anything but go up and down or side to side, no way to access the toolbar, but just now realized, I probably could've accessed the dock, & done something,...
But I turned on the pad & prayed, at first it didn't do anything, but then finally connected.
Once that happened, I turned on the mouse again, and now it worked. So I tried to turn the pad off, but it didn't want to turn off, it kept showing up on the screen.....eventually it turned off, and now things are back to normal.
But my question is what does Apple expect us to do, should the mouse screw up? What can be used if it goes down? They seem to have problems for most people, at times, & it seems a bit like not having a parachute...

Saxman,
I think their parachute effort was System Preferences > Bluetooth > Advanced... > "Open Bluetooth Setup Assistant at startup when no input device is present". In your case the keyboard was there so it probably didn't open. Now that you have a mouse and trackpad, you should have at least one of them connect, so that's a bit of insurance.
I would also add those devices to bluetooth favorites located under the gear icon below the list. Select "show more information" if you don't see the favorites selection.
Regards,
Captfred

What are licensing terms for PS in the Photographers LR+PS plan?

I know that with LR I can now, with a perpetual license, use it on two computers, including a Mac and PC.
I also believe that with PS I can only use it on EITHER a PC or Mac with my current perpetual CS 6 license.
What are the terms for PS if I subscribe to the Photographers CC plan? Can I use it on two computers? On both a PC and Mac?

Creative Cloud users can install on 2 computers -- Win/Mac or both.
Perpetual License is platform specific. Either Win or Mac but not both.
Nancy O.

What are some good thing things about the 5s

What are some the good things about the iphone 5s

http://www.apple.com/iphone-5s/features/
http://www.apple.com/iphone-5s/design/
http://www.apple.com/iphone-5s/built-in-apps/
http://www.apple.com/iphone-5s/app-store/
If you can ask a more specific question, we can be more specific in our replies.
Regards.

What are the supported uplink modules in the WS-C3850-48F-L?

Similar Messages

Maybe you are looking for