What are the system settings, etc., needed for a project in DV widescreen?

Hello - to do a project in DV widescreen -- what are the proper system settings and what steps must I take to import and log footage? I've tried the anamorphic -- but viewer doesn't connect to camera -- sorry this is so rudimentary but if anyone can help me get it going, I'd be very grateful. Thank you!

If your footage is DV NTSC, it is anamorphic if it's widescreen. You should be able to simply use the "Easy Setup" for DV NTSC Anamorphic and edit your heart out.
If you can't see the camera, might trash preferences: http://fcprescue.andersholck.com/
And if that doesn't work, QT 7 should be reinstalled: http://docs.info.apple.com/article.html?artnum=301852
Jerry

Similar Messages

What are the best settings to use for the newest AirPort Extreme (AC wifi) with my optimum online service provider?

I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?

I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled.

What are the parts i will need for my ipod since my ipod screen remains completly blank white

what are the parts i will need for my ipod since my ipod screen remains completly blank white

- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

What are the BP and BF need for E- Recruitment configuration?

Dear All,
We are going to implement E-Recruitment.
System is ECC6, EHP6 and portal 7.3
Client is Indian
We are going to deploy below Business Packages in portal.
BP Recruiter
BP Recruiter Administrator
We are going to activate below Business Functions in ECC.
HCM_ERC_CI_1
HCM_ERC_CI_2
HCM_ERC_CI_3
HCM_ERC_CI_4
Are there any other to deploy BP and activate BF?
Please guide me on this.
Regards
Anoku

Hi Anoku,
Please check the prerequisites for the business functions. You can find the documentation regarding the business functions in transaction SFW5.
For example: Starting from HCM_ERC_CI_2, you will need to activate HCM_ERC_SES_1 as a prereq.
Keep in mind: You only need to activate the business functions which bring you the functionality you need.
Regards,
Luk

What are the proper settings to encode for the iPad using compressor?

I'd like to use 1080p the specs say it is capable of.
I can get it working using hand brake but I don't see why I can't do it with compressor.

The official specs for the iPad 2 do not include the 1080p video format so your not going to find a 1080p preset in Apple's Compressor that is marked for use with any iOS device. Apple states the following in the iPad 2 specs:
"Video formats supported: H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format"
However, the iPad 2 CAN mirror or scale up to a 1080p TV output and that's all they mean when they say:
"Video mirroring and video out support: Up to 1080p with Apple Digital AV Adapter or Apple VGA Adapter (cables sold separately)"
In any case, all of the A4/A5-based iOS devices can (unofficially) decode 1080p video but for quality results you do need the iPad 2 (the iPhone 4, 4th generation iPod touch, and the original iPad can decode some 1080p sources but you may see dropped frames or stuttering on those "lesser" devices).
As for creating 1080p content you can use whatever tools you want (just select 1920x1080 as the dimensions, use an H.264 codec, and restrict the bitrate to something between 4 to 10Mbps -- you may need to experiment with the latter to find the best results). However, you MIGHT need a third-party app to actually transfer and play that content on your iPad since iTunes MAY not allow you to directly sync that file to your iPad (because it exceeds the "official" spec).

What are the proper settings to use for Quadro 2100M on WS60 workstation

Hello,
I have a WS60 Workstation. When going through the settings for physix and others I noticed that the Nvidia card has no ports assigned to it.
How do I ensure that the laptop is indeed using the quadro card?
Thanks

For the Optimus structure, NVIDIA graphics is doing the rendering but it's Intel Graphics which is showing the rendered graphics on the screen. This is why you didn't see NVIDIA Graphics is connecting with any displays.
You can check the power button light, it will light orange when the dedicated graphics is in used.
(White color shows it's using the integrated graphics)

What are the AIA pack's needed for Biotechnology and pharma industries

Hello
We have a client in biotechnology & Pharma that needs AIA/PIP's to be installed.
Please suggest if any of them are available
Thanks
Sam

If you have experience in Java development and maybe have used other UI frameworks (using MVC pattern) you should be able to pick up WebDynpro pretty quickly.
There are a lot of articles and tutorials available for CE/BPM. Check out http://www.sdn.sap.com/irj/sdn/nw-ce as a starting point.
Edited by: Christian Loos on Aug 20, 2010 2:59 PM

What are the best settings for a retina display image?

If we Export for Web then view it on a retina display monitor, the image lines look blurry and it's not as crisp as non-retina display monitors.
What are the best settings when intended for retina display monitors while keeping the file size down?
Thanks!

Mark, yes a DVD will play back on a HDTV, just the quality will not match the capability of the playback device. This is certainly the easiest approach though.
As the article you referenced says, ensuring that your previews are set to a larger pixel dimension than your required output will ensure maximum quality, given that you will more than likely have movement on the images in the slide show I would suggest going with pixel dimensions that are at least 1920px.
Let us know how you go.
Tony

What are the required settings for Quality Certificate

Hi Team
What are the required settings for Quality Certificate for Raw material from vendor. This is my RR - Result Recording for inspection lot.
Please sugget me T-Code to view this.
Can I see say for 6-9 months RR done insp. lot.
Thanks

Settings for Quality Certificate for Raw material from vendor,
Activate QM Procurement key, enter qm control key with certificate and Enter certificate type in certificate field.
There are 2 cases,
u want details of certificate send by vendor
u want to record results and see inspection lot wise results.
case1
depending upon the certificate selected by u, system will give u warning or error msg for certificate confirmation at the time of gr. for confirmation QC51 t_code is used. here status has to be changed to 'filed and inspected' then gr will be allowed.
all these certificates can be dispalyed in QC55 T_CODE.
CASE2
U can record results and see in inspection report tab in QA33
Edited by: YOGINI B THORAT on Aug 4, 2009

What are the ideal settings for my TC with Shaw's Cisco DPC3825 router/modem

My old 2nd Gen Time Capsule crapped out and now I am about to set up my new 2TB TC. My provider is Shaw Communications and they have upgraded me to their Broadband 100 Mbps service. This came with a new modem/router combo made by Cisco and is model DPC3825. Before I start plugging things in I'd like to know what are the ideal settings such that I gain the most of the BB100 service. Should I be setting the Cisco modem/router to Bridge mode or the TC? Should I have Shaw disable anything? Any insight is greatly appreciated.

Unless you specifically need to have the TC perform as the main router for your network, life will be a lot easier if you configure the TC to operate in Bridge Mode.
Whether the Cisco modem/router or gateway can possibly be configured to act as a simple bridge mode modem is one thing to consider.
Whether Shaw would support you in the event of any connection difficulties with the modem/router configured this way is another.
Since Shaw is your provider, it might make sense to talk with them about best practice as far as configuring the DPC3825.
Once you have that information in hand, you will then have the answer on how best to configure the TC.....which will very likely be in Bridge Mode.

What are the default settings for ethernet, shows connected but no internet

What are the default settings for ethernet ? shows connected but no internet via ethernet.
It used to work fine but I think i have changed something getting my airport to work.
Now i only get internet via wifi.
Thanks in advance

From the menu bar, select
 ▹ System Preferences... ▹ Network
Click the Assist me button and select Assistant. Follow the prompts.

What are the default settings for spaces

What are the system's default settings for SPACES preferences?

Below is a pict with Enable spaces checked so you can see the default popup menus.

What are the email settings for mac mail

what are the email settings for mac mail

If you mean iCloud email, you can automatically configure this on your Mac runnint Mountain Lion by going to System Preferences>iCloud, signing into your iCloud account and checking Mail. To manually configure it, use these settings: http://support.apple.com/kb/HT4864.

What are the system requirements for Firefox 4

What are the system requirements for Firefox 4.0? There's all sorts of information on how to improve performance, etc., etc. However, I cannot find the simple list of system requirements that most software companies put on their web site (i.e. RAM and processor speed). This simple information seems to be completely misssing!

They are available here: http://www.mozilla.com/en-US/firefox/4.0/system-requirements/

I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. So, what are the parameters that I need to set in CRM system so that my quotation gets replicated?

Dear Experts,
I have created a quotation in CRM system. I want that to be downloaded into ECC, so that, I can create a sales order there with reference to that quotation. What are the parameters that I need to set in CRM system so that my quotation gets replicated without any error?
Please help me in this regard. An early and in detail step by step guidance is highly appreciated.
Thanks,
SMTP

It may be best to recreate the folder and the smart playlists from scratch.
tt2

What are the system settings, etc., needed for a project in DV widescreen?

Similar Messages

Maybe you are looking for