What are the tables to be used for these reports

hello everybody,
         i am a new user. it is only recently that i have started learning ABAP. i was given a rask by my faculty to develop the following reports. can anyone help me find out the tables that are used for them.
1.  Report for Sales Orders due for delivery.
2.  Revenue Reports based on Order Types.
3.  Report for list of Pending Purchase Orders, Cancel Purchase orders.

Hi,
This depends on which fields you are supposed to show in output.Ask the person about layout requirement. How they want output of the report and which fields.
Normally Functional person will give table name also.
Here are few tables which can be useful in your requirement.
Sales Header table : VBAK
Sales Item table : VBAP
Delivery Header : LIKP
Delivery Item : LIPS
Purchase order header : EKKO
Purchase order item : EKPO
Better to concern this with u r requester and u ll get definite answer.
*MARK if this helps

Similar Messages

  • What are the transaction codes we use for LSMW in MM, SD, PP  & FI/CO gnrly

    Hi all,
    What are the transaction codes we use for LSMW in MM, SD, PP  & FI/CO generally?
    Help will be surely rewarded.
    Thanks and Regards,
    Creasy

    > What are the transaction codes we use for LSMW in MM, SD, PP  & FI/CO generally?
    General threads about LSMW in MM, SD, PP, FICO will be locked and deleted generally.
    > Help will be surely rewarded.
    &********************** Please read "the rules" if found usefull... ************************&
    Cheers,
    Julius

  • What are the best settings to use for the newest AirPort Extreme (AC wifi) with my optimum online service provider?

    I have the current generation of the AirPort Extreme and a handful of devices that utilize the new 5Ghz A/C frequency. My internet speeds were blazing fast when I had first set it up but lately it has been lagging terribly. I was told that changing my dhcp did help, which it did it seems like it might be back to its normal speeds but I just want to know what are the best settings to configure for the airport so that I can get the most out of my service on all my devices? I'm using a CAT 6 cable which does help, I have a guest wifi setup with a wifi password which I understand will slow it down a little. Can anyone just point me in the right direction or just give me a step by step guide on what settings to configure? Should I really consider turning off the guest network?

    I am assuming that you are looking to configure your network to provide the highest level of bandwidth possible for your network clients. If that is the case, the following are a few things to consider:
    The Internet modem should support Gigabit Ethernet. That is the Ethernet connection between the modem and your 802.11ac AirPort Extreme should be Gigabit Ethernet.
    Use CAT-5e or CAT-6 Ethernet cables between all wired connections.
    Only expect 802.11ac performance with 802.11ac clients in the same room as the base station.
    Eliminate or significantly reduce any forms of Wi-Fi interference on both the 2.4 & 5 GHz bands.
    When streaming, especially HD video on your local network, use wired connections between the host and player devices when possible.
    Other than the above suggestions there are no "magic" settings that you can make on your AirPort. Note: The Guest network shares the same bandwidth as the "main" network. Unless you have a network goal to provide this type of network, it is best left disabled.

  • [SOLVED] What are the sectors 2-33 used for?

    In regard to BIOS Boot Patition for GRUB, GPT says:
    Afterwards, create a new partition with gdisk and manually specify its position to be sectors 34 - 2047, and set the EF02 partition type.
    Given that sector 1 is allotted for MBR, what are the remaining sectors 2-33 allotted for?
    Last edited by DiamondbacK (2013-08-03 21:10:27)

    DiamondbacK wrote:I'm still confused that don't sector numbers start from 1 according to Wikipedia entry on LBA?
    No; from the article you've referenced:
    Wikipedia wrote:blocks are located by an integer index, with the first block being LBA 0
    In this context, "block," "sector," and "LBA" are more-or-less synonymous. (There is a reference on that page to sectors in the CHS scheme ranging from 1-255, but that's in the CHS system, which is not used in GPT and is pretty much history even for MBR.)
    If that's the fact, sectors 2 instead of sector 1 is allocated for Primary GPT Header, and sector 3-34 have to be allocated for Primary GPT Table which need 32 sectors. Then sector 34 can't be  the beginning sector for BIOS Boot Partition.
    This is all based on a false premise -- or at best, a non-standard numbering system.
    Does that imply the sectors 34-2047 I quoted from Arch Wiki actually means LBAs 34-2047, which is equivalent to sectors 35-2048?
    Again, false premise. Whether you call them blocks, sectors, or LBAs, these units are most commonly numbered starting from 0. Certainly that's true in both GPT fdisk (gdisk, cgdisk, and sgdisk) and parted, which are the two major classes of programs you're most likely to use for partitioning in Linux.

  • What are the magsafe 2 adapaters used for

    My mac book pro has mag safe 1. What is the mag safe 2 adapter used for? Macbook air maybe? Thank you

    From the U.S. Apple Store --- here are some of the things that use it:

  • What are the tables to be used in a material cost estimate report????

    Hi..
    i am creating a product costing report...(similar to ck11n n ck13n)
    it has two selection screen parameters( matnr and plant)...
    i need to display
    1. cost center
    2.total hours per cost center
    3.total labor per cost center
    4.total overhead per cos center
    How do i proceed??
    where do i fetch the data from??
    how do i do all the calculations???
    plz help me..

    Hi
    Use the tables
    COST
    COSP
    COEP
    AFVV (activity)
    Reward points if useful
    Regards
    Anji

  • What are the proper settings to use for Quadro 2100M on WS60 workstation

    Hello,
    I have a WS60 Workstation.  When going through the settings for physix and others I noticed that the Nvidia card has no ports assigned to it.
    How do I ensure that the laptop is indeed using the quadro card?
    Thanks

    For the Optimus structure, NVIDIA graphics is doing the rendering but it's Intel Graphics which is showing the rendered graphics on the screen. This is why you didn't see NVIDIA Graphics is connecting with any displays.
    You can check the power button light, it will light orange when the dedicated graphics is in used.
    (White color shows it's using the integrated graphics)

  • In Aperture 3.4 Export Slideshow to a video, what are the actual Data Rates used for "Best", "High", ... "Least" quality for a given resolution?

    My Photo website host (SmugMug) converts uploaded video files at a specific Data Rate in Mbps before installing them. I would like to compress my slideshow video file to the same rate before I upload it to reduce file size and upload time. When I choose the "Custom" setting for an Export, I can choose 1 of the 5 Quality choices and see the estimated file size. But, I cannot know what the actual Data Rate is until after I wait a long time to export the slideshow (hours for a long slideshow) and then examine the resulting file in QuickTime Player's Inspector.

    I ran a few tests using a short slideshow (16 images, 1:23 mins/secs) at 1,728 x 1,080 resolution to find out the bit rates for various quality level choices.
    Export setting              Quality          Resulting bit rate          File Size
    HD 1080p                    default                20.68 Mbps              214.8 MBytes
    Custom                       Best                   20.49                       212.8
    Custom                       High                     6.25                         65.0
    Custom                       Medium                3.97                         41.3
    However, I don't know if those bit rates will be the same for different length slideshows or for different output resolutions. My SmugMug host site uses an 8.0 Mbps rate for a 1728 x 1080 video file. If I choose Custom/Best, my file will be almost 3 times bigger and much higher quality than necessary, but if I choose Custom/High, my file will be smaller and lower quality than SmugMug's converted version.
    I have installed MPEG StreamClip that will let me convert an exported Aperture slideshow video file, and StreamClip allows me to choose a specific bit rate in Mbps. But, I would prefer not having to do a 2 step process (Export from Aperture, then convert in StreamClip).

  • What are the Corresponding fields in CRM for sales order in ECC

    HI! Experts,
    While creating a standard sales order in CRM I want to poulate these fields in ECC Sales order, these fields are
    VBKD-BSARK - Purchase order type
    VBAK-BNAME - Name: user ordered
    VBKD-IHREZ - Web Confirmation Number
    VBAK-TELF1 - Telephone number
    Or the other way round I want to know what are the corresponding fields in CRM for these fields so that when I pass the data in crmd_order in those fields it gets populated in the above mentioned fields.
    Thanks and Regards
    Mayank

    Mayank,
    May I suggest you to create an Order in R/3 with these fields and check that back in CRM. This is not as easy as it may sound. It is possible that some of these fields are "determined" by the system - for example the "Sold-To"'s first telephone number maintained in VBAK-TELF1. So, though it becomes a part of the Order header in R/3, CRM, generally doesn't duplicate them in the transaction but allows to refer back to the master data from the transaction!
    Check the following fields in CRM and see if you find the data you require.
    VBKD-BSARK - Purchase order type There is a field in CRM that "holds" this value. ACTIVITY CATEGORY. This can be found in the ACTIVITY_H set of the transaction. Filed name CATEGORY. Problem with this is, - "Category Type" of a CRM Activity to be mapped to PO type? Didn't workout good for us since the master data for both vary widely. So, we used custom Header Extension data for this (EEWB). So, you have to work
    VBAK-BNAME - Name: user ordered Is usually CREATED_BY in the CRM Order Header (CRMD_ORDERADM_H). But this fills up the VBAK_ERNAM bit not the BNAME.See the next item, that may give a clue if this is related to the next item.
    VBAK-TELF1 - Telephone number is usually "determined". Usually the Sold-To's first telephone number maintained in the Business Partner "Communication" section for that Sold-To.
    VBKD-IHREZ - Web Confirmation Number Actually it is Customer's or vendor's internal reference as per standard use. Looks like your customer is using it for custom purposes. Well, if you maintain the relationship  "Is Correwspondence Recipient for" with the Sold-To partner in CRM, and maintain the details of this Person, then this will be transferred to R/3.
    Hint: Once you have the R/3 order in CRM, try using the Report program (SE38)  CRM_ORDER_READ in CRM. This is a good tool to "dissect and see" and order in CRM. The program needs only the Transaction Number as the input.
    Easwar Ram
    http://www.parxlns.com

  • What are the tables used for ACR & Master data daemon job?

    Hi Experts,
    What are the tables used in the backend for ACR & Master data daemon jobs. I would like to see the details of CHANGERUNMONI or ACR/Hierarchy Change run.
    Kr,
    Praveen

    Hi Praveen,
    Have you tried these tables BALHDR, BALDAT and BALOBJT for checking master date daemon delta status. It may not give you complete details. but definitely helps.. If you find any more details please do let me know..
    Thanks,
    Bharath

  • What are the table names for CRM and APO?

    hi friends,
    what are the table names for CRM and APO?
    Regards
    suneel.

    hi Suneel,
    check in crm forum
    Re: SAP-CRM Tables
    BUT051 BP Relationship: Contact Person Relationship
    Similar to BUT050 , additionally contains Contact Person’s Address data
    BUT0BK Business Partner: Bank Data & Details
    BP Number, Bank Key, Bank Country Key, Bank Account Number
    BNKA Bank Master Data
    BUT100 BP: Roles
    ADR2 Telephone Numbers (Business Address Services)
    ADR6 SMTP Numbers (Business Address Services)
    Contains Email – Id of the BP.
    ADRC Addresses (Business Address Services)
    BP’s Complete Address Details- City, Country, Post Code, District, Street, Title No Etc
    TSAD3T Table containing the Title text against a Title No.
    COMM_PRODUCT Master Table for Product
    CRMM_BUAG Master table for Business Agreement
    CRMM_BUAG_H Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU CRMD_ORDERADM_H Contains the Header Information for a Business Transaction.
    Note:
    1. It doesn’t store the Business Partner
    responsible for the transaction. To
    get the Partner No, link it with
    CRM_ORDER_INDEX.
    2. This table can be used for search
    based on the Object Id(Business
    Transaction No).
    CRMD_CUSTOMER_H Additional Site Details at the Header Level of a Business Transaction
    CRMC_PROC_TYPE Master table Business Transaction Type
    CRMC_PARTNER_FCT Definition of Partner Functions
    SCPRIOT Priorities for Activities with priority text.
    CRMC_PROC_TYPE_T Text for a transaction type
    CRMC_ACT_OBJ_T Objective Number and Text for Activities
    TJ30T All the status code and text
    CRMC_PR_ASSIGN : Transaction Type and its Transaction Type Object.
    IBIB : Installed Base/Ibase
    IBIN : Installed Base Components
    COMM_PRODUCT : Products
    CRMC_T077D : customer account groups
    CRMD_ORDERADM_H (for header) CRMD_ORDERADM_I (Item data)
    CRMD_ORDERADM_H Business Transactions CRM
    CRMD_ACTIVITY_H Activity
    CRMD_OPPORT_H Opportunity
    BUTOO : Customer details
    BUT001 BP: General data II
    BUT100 BP: Roles
    BUT150 BP relationship: Attribute table (test
    different
    BUT_HIER_TREE Business Partner Group Hierarchy
    CDBC_T_PRODUCTID Mapping: Product Id
    CDBD_ORGMAN Business transaction - organizational unit -
    set
    COMC_PRODUCT General Product Settings
    COMC_R3_FIELDS Assignment of R/3 material master fields to
    CFOP
    COMM_CATEGORY Category
    COMM_CFGMAT Basic Data for Materials
    COMM_HIERARCHY Category Hierarchy
    COMP_TYPES Hierarchy Tool: Comparison Type Check
    Table
    CRMC_CPRICPROC Customer Pricing Procedures
    SMOKVBEZ15 Assignment employees to positions
    CRMMLSGUID: GUID entry (should match GUID in CRMPRLS)
    CRMM_BUT_CUSTNO : Also GUID table (GUID here should match GUID in R/3 table CRMKUNNR)
    SMOFSUBTAB : Mapping & Parameters
    SMOFDSTAT : Download Monitor (R4AM1)
    SMOFFILTAB : Filters (Should match filters in R3AC1 & R/3 Table CRMFILTAB)
    SMOFOBJECT Definition of Objects for Download
    SMOFOBJPAR Parent Objects of an Object in Table
    SMOFPARSFA Middleware Parameter
    SMOFQFIND Queue Finder Table for MW-Queue finder
    SMOFTABLES Definition of Tables for Download

  • What are the tables/view used to Compute Dependecies Report

    Hi,
    what are the tables/views we have in APEX, which is used to create the Compute Dependecies Report
    Home -> Application xxxxx > Application Reports > Shared Components > Database Object Dependencies
    thanks,
    Deepak

    Hi Scott,
    thanks for the quick response.
    So my question is then...
    I want to create a APEX Report which will give me the following information.
    1. Application and all the Pages associated with it, which I am getting from apex_applications and
    apex_application_pages. This is OK
    2. List of all the Database Objects (Table/View) which the individual page is using, I mean relation between Page ID and database object. HOW to get that???.....(I want for each individual page, the list all the database objects (tables/views), which that page is using)
    Thanks,
    Deepak

  • Hi i have  an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india

    hi i have  an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india

    Only the carrier to whom the device is locked can authorize it's unlocking.  Contact the carrier to see if they offer unlocking and if you qualify.

  • What are the tables for documents in PP Orders

    Hi all,
    What are the tables for Document Items (type D) in PP orders ?
    Regards,
    Magda

    Welcome to SCN, please refer to the rules of engagement, link at the top of every forum, please search before asking basic questions.
    Thread locked.
    Thomas

  • What are the tables for Partner Fuction regarding the Vendors Purchasing ?

    Hello Gurus,
    What are the tables for Partner Fuction regarding the Vendors Purchasing Organisation. I need the Partner Function Key, Parner Function Name, Number and the Name of the Number.
    Thanx in advance,
    Ramona

    Hi Jürgen,
    I know that table but it is only showing me the technical name of the Partner Function and I need also the rest: the text(name), number and the number name (text). I presume there are other tables for those infos.
    I am not sure if I understand what are these. I just want the table to upload the data to BW.

Maybe you are looking for