What are the teradata drivers required to connect to the teradata cube??

Hi All,
Using voyager connection in the infoview , we are connecting to the cube to generate reports. But we are not able to connect to the server and see the cube.
We asume that we need to have specific teradata drivers to connect to the cube, so Could anyone let me know what could be the Teradata drivers to connect to the cube???
Thanks in advance.
Regards,
Sudharam

Not in one of the currently available versions. You may want to open a case by SAP support (http://service.sap.com/support) and ask if they plan to support it in a future version.
Still I will recommend to try to contact some teradata expert here and ask if it is possible to access the cubes over the ODBC driver.
Regards,
Stratos

Similar Messages

  • What are the OLAP cube data access auditing capabilities

    Hi All,
    We are currently activating RDBMS fine-grained-audit (FGA) policies on our datawarehouse to comply with security policies in place in our company.
    Part of our datawarehouse store financial confidential data for which we need to perform access auditing.
    The confidentail data reside in fact tables that are also used to feed OLAP cubes.
    Are there FGA capabilities (or similar) available to audit access to confidential data stored in OLAP cubes ?
    Thank you.
    A. Walrant

    Hi All,
    We are currently activating RDBMS fine-grained-audit (FGA) policies on our datawarehouse to comply with security policies in place in our company.
    Part of our datawarehouse store financial confidential data for which we need to perform access auditing.
    The confidentail data reside in fact tables that are also used to feed OLAP cubes.
    Are there FGA capabilities (or similar) available to audit access to confidential data stored in OLAP cubes ?
    Thank you.
    A. Walrant

  • What are the available extract structure

    hi all
    i have to generate a report for sales . i want to know what are the extract structure for sales.
    and also let  me know what are the standard cube for sales.
    and how can i find them.
    thanks in advance

    You question is too generic it would better if you can precise
    Check in R/3 - LBWE - > LO Cokpit you can expand nodes for SD  to see their Extract structures
    Sales -Application 11
    Shipping - 12
    Billing     - 13
    Refer help
    http://help.sap.com/saphelp_nw04/helpdata/en/71/1769372b2b7d20e10000009b38f842/frameset.htm

  • What are the settings required to block a particular IP to make connection on particular port no running on another IP?

    Problem:
    -   What are the settings required to block a particular IP to make connection on particular port no running on another IP?
    Environment:
    Operating System            : - Windows XP Service
    Pack 1
    System type                     : - 32 – bit Operating System
    Description: - We
    have requirement to block Port access from particular IP. It is specific requirement for a machine.
    We have service which is running on
    Server with IP: - 10.14.15.116 on
    Port Number 3366 and we need to
    block Client Machine IP: - 10.14.15.114 to make
    any connections with server on this port. Not even client machine
    should be able to telnet on server on port 3366.
     I
    will be really thankful.
    For any kind of input which can assist us to complete the requirement.

    Does it allow in same way with firewall setting in Windows Server 2008?
    I will read in details shared link, but as a matter of urgency; kindly let us know, if we can follow some concise instruction to do above activity.
     I
    will be really thankful

  • What are the Trading Card Games for iPod touch that doesn't requires Internet connection?

    What are the Trading Card Games for iPod touch that doesn't requires Internet connection? Suggestions, please.

    Why not look at the apps and fine out?
    The odds of someone here knowing that are slim to none.

  • What are the Jar files required,that for accessing the Type 4 Drivers.

    what are the Jar files required,that for accessing the Type 4 Drivers.
    Regards,

    Well it is Database Specific.
    Howevr there are few 3rd party .jar (Derby) which you can use it for accesing some standard databases.

  • What are the real minimum requirements for Mountain Lion?

    What are the real minimum requirements for Mountain Lion. Currently running Snow Leopard. I have a late 2006 Model: iMac6,1. Specs: 2.33 GHz Core 2 Duo, 3 GB 667 MHz DDR2, and the optional nVidia GeForce 7600GT c/w 256MB GDDR2. The advertisement is stating a 2007 model as the minumum, however the fastest 2006 Gen Plastic iMac should be faster then the slowest 2007 Gen Aluminum iMac7,1?

    From a previous posting from some else, I saw it was the 32bit versus 64bit video card driver being the issue. I was wondering if the optional video card I have installed also was limited to the 32bit issue. 64bit drivers exist for the 7600 GT GPU.

  • What are the minimum db user privileges required for CDC?

    What are the minimum privileges required for the source data server user in order to to successfully implement CDC
    Currently I'm getting an "Insufficient privileges" error when trying to start a CDC journal on a model. The error is happening on the step that creates a trigger on the table in the source schema.
    Here's the situation:
    The data server uses the user "ODI_TEMP" for its connection. ODI_TEMP has been granted select privileges on the desired tables in the source schema. When starting the CDC journal on the model for the source schema, ODI tries to create a trigger on the source tables. This fails since the ODI_TEMP user can't create triggers on anything outside of it's own schema. For obvious fundamental security reasons, we cannot give the ODI_TEMP user the CREATE ANY TRIGGER system privilege on the data source.
    Journalizing is set up using JKM Oracle Consistent. ODI is 11g, DB is 11g.

    Hi,
    You can go for this
    Grant CREATE ANY TRIGGER system privilege to ODI_TMP
    Start the Journal , it will create triggers in ODI_TMP schema for the tables present in your source schema.
    Now revoke CREATE ANY TRIGGER system privilege from ODI_TMP.
    It will continue to work .. only when you are restarting the journal (due to adding or removing some tables in CDC) , you will be requiring CREATE ANY TRIGGER privilege.
    Thanks,
    Sutirtha

  • What are the normal settings to connect to wifi?

    I visited my friend over the weekend and her school required me to change my airport settings in order to connect to the internet. Ever since I got back, I have been unable to connect to my usual wifi source. If I can, it drops off after a few minutes. What are the normal settings to connect to wifi?

    As a minimum, the following would be the "normal settings" to connect your Mac to an unsecured Wi-Fi network. These settings can all be found in System Preferences > Network > AirPort or Wi-Fi > Advanced
    TCP/IP tab: Configure IPv4: Using DHCP
    Proxies tab: Nothing should be checked on this tab, except the "Use Passive FTP Mode (PASV)" option.
    Hardware tab: Configure: Manually
    On the Wi-Fi tab, you may also want to delete any Preferred Networks that you are not using.

  • What are the System Requirements for Web Server hosting Adobe Air application

    Working on a project that is using Adobe Air . The Adobe support site has system requirements for the client side application, but for the server side, what are the system requirements?
    Using a Windows server, would expect to have approx. 100 concurrent connections at any given time.

    Adobe AIR applications are installed on the end user's computer. They are not hosted on a web server. You can deploy an AIR file, which is the installer file for an AIR application, via your web server.

  • What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?

    What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go? Also, are there any compatiility issues with newer models and G5/G4s?

    What is the life expectancy of the older base stations (flying saucer/spaceship looking one) and what are the telltale connection signs that it's starting to go?
    Apple has never published any life expectancy specifications for any of their routers (or desktops/laptops) that I am aware of. As a rule of thumb, I would consider two years for any consumer electronics that operates 24 x 7 to be a reasonable period. Obviously some experience more or less and it would depend on a number of factors: ambient temperature, electrical circuit stability, area prone to lightening strikes, etc.
    Some telltale signs that an AirPort has (or is about to fail):
    Status lights are not illuminated or do not match any of the known configurations.
    Unit feels cool to the touch after power is applied even after a lengthly (15-30 minutes) period of time.
    Unit refuses to intialize, even after performing multiple "factory default" resets.
    Weak or no wireless signal.
    Ethernet port(s) not functioning
    Etc.
    Also, are there any compatiility issues with newer models and G5/G4s?
    Three potential issues:
    Depending on the version of OS X you are running on these clients, they may not be able to support the latest AirPort Utility required to administer the latest AirPorts. OS X 10.5.7 is the minimum required.
    Support for 802.11n connectivity. Most G5 or G4 Apples support 802.11g, some only 802.11b.
    Support for WPA2. Not supported if the G5 or G4 is equipped with the Original AirPort Card.

  • What are the partner system(R/3) connected with APO

    Hi All,
    Can some buddy help me in checking what are the partner system(R/3) connected with APO.
    Let me explain my requirement in brief.
    I have Login in one APO system, but i donu2019t know the partner R/3 system available for it.
    So from where i can get this information ......?
    Regards

    Hi SCM APO 22,
    Try the below menupath in customisation
    spro > sap guide > apo > integration with sap components
            > Integration via APO Core Interface (CIF) >
                   > Basic Settings for Creating the System Landscape
                        > Set Up RFC Destination
    Please confirm
    Regards
    R. Senthil Mareeswaran.

  • What are the network requirements for the Remote Panel Server?

    What are the network requirements for the Remote Panel Server?
    I've been trying for a while now to setup a Remote Panel.  I can connect to my computers remote panel from other computers on my LAN but nowhere else.  
    When ever I use the web publishing tool it gives me a URL in this format:  http://Computer-Name.Corporate-Name.local:8086/VI-Name.html Apparently this means I have a local DNS server and this URL has no meaning from the public.
    When I try connecting with the Operate>>Connect to Remote Panel..., I get this error message:
    "Connecting to remote panel server...
    Remote panel connection refused by specified server: Make sure LabVIEW Web Server is enabled on specified server"
    I got the same error when I tried to host a remote panel from my laptop at home, on my Wi-Fi.  Is there some network or firewall setting I'm not seting?  Could it be my server or router or private network?
    My goal is to be able to host Remote Panels from my laptop while I am travailing internationally, by using 4G mobile internet.  Is that even passable?
    Solved!
    Go to Solution.

    Over_Nyquest
    Have you enabled the Remote Panel Server in the Web Server options on the server?
    Kyle B  |  Product Support Engineer  |  ni.com/support

  • FAQ: What are the system requirements for GroupPix?

    FAQ: What are the system requirements for GroupPix?
    Answer:
    iOS:   minimum iOS version is 6.0           GroupPix 1.x runs on iPhone 4, 4s, iPhone 5, or iPod touch (5th generation or later)
    Android: minimum OS version 4.0         GroupPix 1.x is designed for Android phones
    Message was edited by: Pattie F 11/7/13

    For Mac:
    http://support.apple.com/kb/SP663
    Software:
    Mac OS X version 10.6.8 or later (intel-based hardware)
    400MB of available disk space
    iTunes in the Cloud and iTunes Match availability may vary by country.
    Hardware:
    Mac computer with an Intel Core processor and 512MB of RAM
    To play 720p HD video, an iTunes LP, or iTunes Extras, a 2.0GHz Intel Core 2 Duo or faster processor and 1GB of RAM is required.
    To play 1080p HD video, a 2.4GHz Intel Core 2 Duo or faster processor and 2GB of RAM is required.
    Screen resolution of 1024x768 or greater; 1280x800 or greater is required to play an iTunes LP or iTunes Extras
    Broadband Internet connection to use the iTunes Store
    Apple combo drive or SuperDrive to create audio, MP3, or back-up CDs; some non-Apple CD-RW recorders may also work
    Apple SuperDrive to back up your library to DVDs; some non-Apple DVD-RW drives may also work.
    You can run OS X 10.6.8 in an Intel-based MacBook w/ first model, in retail DVD.
    But it won't work in a power-pc architecture Mac... see specifications:
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Hopefully this helps.
    Good luck & happy computing!

  • What are the system requirements for downloading Itunes?

    What are the system requirements for downloading Itunes?
    When I go to http://www.apple.com/itunes/download/  it is not an option to download Itunes.  The box is grayed out and I can not click on it!

    Windows System Requirements
    PC with a 1GHz Intel or AMD processor and 512MB of RAM
    Windows XP Service Pack 2 or later, 32-bit editions of Windows Vista, Windows 7, or Windows 8
    64-bit editions of Windows Vista, Windows 7, or Windows 8 require the iTunes 64-bit installer
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store
    Macintosh System Requirements
    Mac computer with an Intel Core processor
    OS X version 10.6.8 or later
    400MB of available disk space
    Broadband Internet connection to use the iTunes Store
    Also, just let the page load a bit. It may become available once the page loads.

  • What are the system requirements for apple itunes 11.1?

    what are the system requirements for apple itunes 11.1?

    For Mac:
    http://support.apple.com/kb/SP663
    Software:
    Mac OS X version 10.6.8 or later (intel-based hardware)
    400MB of available disk space
    iTunes in the Cloud and iTunes Match availability may vary by country.
    Hardware:
    Mac computer with an Intel Core processor and 512MB of RAM
    To play 720p HD video, an iTunes LP, or iTunes Extras, a 2.0GHz Intel Core 2 Duo or faster processor and 1GB of RAM is required.
    To play 1080p HD video, a 2.4GHz Intel Core 2 Duo or faster processor and 2GB of RAM is required.
    Screen resolution of 1024x768 or greater; 1280x800 or greater is required to play an iTunes LP or iTunes Extras
    Broadband Internet connection to use the iTunes Store
    Apple combo drive or SuperDrive to create audio, MP3, or back-up CDs; some non-Apple CD-RW recorders may also work
    Apple SuperDrive to back up your library to DVDs; some non-Apple DVD-RW drives may also work.
    You can run OS X 10.6.8 in an Intel-based MacBook w/ first model, in retail DVD.
    But it won't work in a power-pc architecture Mac... see specifications:
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Hopefully this helps.
    Good luck & happy computing!

Maybe you are looking for

  • How do I report a bug against Flash Player for Google Chrome?

    Flash Player for Google Chrome is currently developed jointly between Adobe and Google.  Because of this relationship, we would like to encourage users that are encountering issues with Chrome's Flash Player to report bugs directly to the Chromium da

  • How do i use PL/SQL function in filter operator

    Hi, i want to use one pl/sql function in filter operator. how do i use it in filter condition. error i am getting is " error occured during expression validatation. my filter condition is INOUTGRP1.LAST_UPDATE_DATE > "GET_LAST_UPDATE_DATE"() can any

  • DME file with some cyrillic content

    Dear all, I'm tring to save DME file (payment medium) with some cyrillic content. It is displayed correctly on SAP GUI screen. But when I try to read saved file from disk, all cyrillic symbols are replaced by ####. How can I setup in which codepage t

  • RMAN disadvantage?

    Hola: I suggested to our DBA that we could consider using rman. He asked why and I replied that I thought making incremental backups would be better than what we do now (cold, full backups each night). He tells me that the problem with rman is this:

  • Coherence *Extend-TCP configuration not working

    Hi,      I was trying to setup the Coherence *Extend-TCP configuration on my solaris box.      To start with, i'm trying to start a Cache server instance by using the cluster-side configuration XML (given at URL below)      http://wiki.tangosol.com/d