What are the things to be changed when changing page name, model, jws, etc?

Hi Everyone,
My jdev version is 11.1.2.3.0.
I have developed one ADF application with one page and it is working fine.
Now i need to change my page name so i modified and it is also working fine.
But while deploying it gives error like model-viewcontroller already exists because previous application without changes is already there in server.
without disturbing the previous application i need to deploy this changed application as a new application to the web logic server.
For that what are all the changes i need to perform and where to perform?
Please give suggestions.
Thanks.

You only need to change the webroot and the application name (you may try with the same application name, but I', not sure it works then).
When you then deploy the server take the ear a new application.
Timo

Similar Messages

What are the things we need to take care while moving from 11g to 12c.

Dear All,
One of my client having the application running on 11g and now he wants to move it on 12c.
Now he is asking to me that, what are the things will not work or impacted due to this. Any code level changes, syntax, functions etc are working in 11g and now there is difference or not working in 12c. Could you please help me in this.
Is there any document for all these thing. I searched on google but not able to find any specific doc.
Thanks in advance.
Regards,
ganesh

Gaurav_91 wrote:
Hi,
Moving from 11g to 12c will not impact anything.
Database in 11g will now act as PDB's in 12c.
And what makes you say so? What about the changes/fixes done in the optimizer that would alter the plans? What about if the client wants to use in-memory database option? And your statement that database in 11g will now act as PDB in 12c doesn't make any sense. What if the client is not willing to move to multitenancy? What about the scripts that are running in 11g without any issues and suddenly, will break in 12c due to PDB's ? Do you have any technical reference to validate your claim that there won't be any impact ?
Aman....

What are the config steps for contract mass change and quota arrangement?

Hi friends
what are the config steps for contract mass change and quota arrangement?
Regards
Raj Kumar

Process Flow
The mass change process consists of four steps. You navigate between these steps by choosing the Next and Back buttons located at the bottom right-hand corner of the screens.
       1.      Search for contracts
You search for and select the contracts or the contract hierarchy that you want to change.
Contracts that have the status Closed cannot be changed.
       2.      Define mass changes
You specify the changes you want to make.
You make changes at header data level and at item data level by choosing the relevant change methods. A green tick appears next to each change parameter so that you can see where changes are already active.
Once you enter this step, the documents you have selected to be changed are locked so that other users cannot make changes to them until you are finished with this process.
       3.      Simulate mass changes
Here you can perform a trial run of your mass changes. This simulation step is optional.
We recommend that you perform this step so that you can check how the change methods you have chosen will be processed by the system.
You receive status messages about the change methods for each contract and can quickly see whether any errors arise in connection with the proposed changes at this stage. From this step, it is easier for you to go back and correct the error than after applying the changes.
Background processing
The system processes the changes in the background.
If there are a large number of contracts to be processed, this step could take some time to complete. In this case, you can leave the transaction so that you can, for example, carry out other tasks in the meantime.
The system sends you an e-mail once the simulation step is complete. The e-mail contains a link to the relevant screen in the application so that you can return to it when it is convenient for you to do so. If you have left the SRM application, you can only return via this link.
Here you can see the status of the changes and, if necessary, you can correct any errors by going back to the Define mass changes step.
The messages that you receive in the simulation step are not confirmation that a change has been performed. They simulate the messages you get after you apply the changes. You must complete the final step of the mass change process and apply the changes before they take effect.
       4.      Carry out mass changes
Here you apply the changes to the contracts.
You cannot reverse this step, which is why we advise you to perform the simulation step beforehand.

I would like to buy used Ipad 3gen 32 or 64 GB   .What are the things I should check for.(and how to check it) It is cash deal -no warranty.

I would like to buy used Ipad 3 32 or 64 GB.It is cash deal and no warranty. What are the things I should check and how to do it ?

Make sure it is in perfect working order before you turn over any money.
Test connected to Internet.   Test Safari and several other apps for crashes.
If it passes this test, it must now have find my iPhone turned off by the seller.   They must also remove the device from their iCloud account.
*****Please observe this.   If the seller can't turn off find my iPhone, then it is not his iPad to sell.   It will lock when you try to activate and will be worthless.****
If this is the owner of the iPad he can also remotely erase the iPad with iCloud.
http://support.apple.com/kb/HT5661

What are the things taken care while using multiple suites?

Hi all,
I have created a plugin which sends the current file path to an url,
its working fine with debugging in Visual studio 2005 and while it is added to the Adobe Illustrator its works only once.
That is its sending the file path only for one file. While i tried for the second time its not working
I am using following suits in my plugin
AIDocumentSuite
AIFilePathSuite
AIActionManagerSuite
AIUnicodeStringSuite
AIURLSuite
I am using the "AIURLSuite" for calling the url and it is calling the url multiple times while its used alone, and its only working once with the multiple suites.
What are the things taken care while using multiple suites? , is it neccessary to release all variables and the suites after completing the task?
Should they released in the same order in which they are acquired?
Thanks in advance
Sreejesh K V

Hi,
The problem was with the "sAIDocument->GetDocumentModified(mod);"
The "GetDocumentModified" is crashing after executing once, i just removed that statement , and now
i am forcefully saving the document with out checking the modification status!
Its working fine now!
Could you please tell me how can we lock a plugin , or a particular function in a plugin.
There is any specific standard to use the GetDocumentModified function?
Thanks and Best Regards
Sreejesh K V

What are the Things required for BI 7.0 Implementation project

Hi Friends,
Can any one suggest me
1.What are the Things required for BI 7.0 Implementation project?
2.System Configurations & Hardware Components?
3. Any additional steps...
plz suggest me.
Regards

Hi lakshmi,
http://csc-studentweb.lrc.edu/swp/Berg/articles/PM_2006_upgrade_NW2004s_Bjarne_Berg_v12.ppt#426,3,Why Upgrade u2013 end of supportu2026
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d163a7-0301-0010-d9b0-98f692ea3c60
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
https://wiki.sdn.sap.com/wiki/x/JYk
Check the following links.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
check the following
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm

What are the things we need to install on client desktop?

Hi all
I will need to install Peoplesoft Enterprise. However, for my part I will need to try to install it into serveral clients but connect it to a database. Which means that the main database is not in my com but in another com, is it possible that I can still install in my computer without a database and connect my com to the main com database? And I will also like to know what are the things I will need to install or configure into my computer which has no database. Such as do I need to configure PIA, WebLogic Server and etc. Can anyone please help me. I really need help and assistant in doing it.
Thanks

The database has been installed and configured with a given Peopletools version, say 8.52.x. You have to have the same version onto your local machine.
And since you want only third tier connection, no need to have any database client.
PIA is a server process to make front end users be able to connection onto the application using their own browser.
AppServer is a server process allowing people to connect in a 3tier mode, and which manage all the Peoplesoft thingy, exclusively to run on the server to make it available for all.
Batch Server, same as AppServer, exclusively on server side to make job process running out there. Not on any client.
Consequently, download the Peopletools (same version as the Peoplesoft database), configure the 3tier connectivity within the Configuration Manager and enjoy PSoft.
Nicolas.

What are the things to check after full imp in 10g?

Dear all,
Source
=======
OS server ==> HP-UX
Oracle version ==> Oracle 9.2.0.8
DB Name ==> MSST
DB total users ==> 320
Full export in ==> /u02/export/Jan09.dmp
Tablespaces ==> SC, SC_I, SA, SA_I, PP, PP_I, AC, AC_I, SD
Destination
============
OS server ==> HP-UX
DB Name ==> CHDB
Existg DB users ==> 20
Oracle version ==> Oracle 10.2.0.4
copied 9i dump file in ==> /u03/export
Tablespaces created same as Oracle 9i i.e;
Tablespaces ==> SC, SC_I, SA, SA_I, PP, PP_I, AC, AC_I, SD
I had run full import on Destination server i.e; Oracle 10g & following is the command i used:
imp system/pwd@conn_string file=/u03/export/Jan09.dmp log=/u03/export/Jan09_imp.log full=y ignore=y statistics=none
Imported successfully with few errors like
Now my question is
===================
How to check everything is same/similar like Oracle 9i database ( source ), for example ( i used this technique ):
What are the things to check after full imp in 10g?
MSST_DB>SHOW USER
MSST_DB>SA
MSST_DB>select object_type, count(*) from user_objects group by objects;
OBJECT_TYPE COUNT(*)
DATABASE LINK 2
FUNCTION 23
INDEX 1795
LOB 6
PACKAGE 8
PACKAGE BODY 8
PROCEDURE 30
SEQUENCE 67
SYNONYM 60
TABLE 644
TRIGGER 3
VIEW 20
CHDB_DB>SHOW USER
CHDB_DB>SA
CHDB_DB>select object_type, count(*) from user_objects group by objects;
OBJECT_TYPE COUNT(*)
INDEX 1794
PROCEDURE 30
TABLE 644
TRIGGER 3
VIEW 20
FUNCTION 23
SYNONYM 60
PACKAGE BODY 8
SEQUENCE 67
PACKAGE 8
LOB 6

What are the things to check after full imp in 10g?Only public database links which are in use by your these users which you export/import (Only if you did user level export/import and not DB level).
If you log files does not show error during creation of any object, you don't need to double check any thing. Otherwise do on with the method which you mentioned by counting the objects.
Or you can create a database link from source to destination and use a query with MINUS to find out if there is any object missing
select object_name,object_type from user_objects
MINUS
select object_name,object_type from user_objects@destination_database;Salman

Under Option Summary, the usage includes AUDIO, PHOTOS, APPS and OTHERS. What are the things included in OTHERS? It is using up my storage space.

Under Option Summary, the usage includes AUDIO, PHOTOS, APPS and OTHERS. What are the things included in OTHERS? It is using up my storage space. Can someone please help?

To add to Nick's comments, "Other" is typically approximately 1 gigabyte. Occasionally for some users, it gets much (many times) bigger because they have some corrupt files. If that's the case, it's best to restore the iPhone.
Plug the iPhone into (current) iTunes, let it sync, then choose "Restore" on the right. If restoring from the iPhone backup does not help, then restore (again) as new and then manaully sync the iPhone.

The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes doesn't accept my command and start clicking itself.what is the problem and how to fix it?

The answer helped me.But still, what are the settings that I have to change for the behavior of the mouse pointer towards finder? Also the mouse pointer sometimes doesn't accept my command and start clicking itself.what is the problem and how to fix it?

If the mouse clicks something on its own then it looks like you have a hardware problem with the trackpad or possibly the battery that is right underneath the trackpad.
I have read that the battery can swell and that would put pressure on the trackpad.

What are the things to be tested in sap xi server before going to use th

1) what are the things to be tested in sap xi server before going to impliment first interface?
2)what are prerequisites to be configured in xi server before implementing first interface?
ragards

Hi Dhanush,
>>>>><i>1) what are the things to be tested in sap xi server before going to implement first interface?</i>
>>>>><i>2)what are prerequisites to be configured in xi server before implementing first interface?</i>
For both of your question the answer would be
1. Check all the Post installation configuration has been done properly, with the help of the following links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
2. Make sure the latest BASIS Component have been imported into your design time environment
After this you can start developing your first interface
Regards
Ramesh P

What are the things we can do through BASIS?

Hello everybody,
I am newcomer in basis, I wish to know the some of the basic
questions such as,
what are the things we can do through basis?
what are the basis components?
How the basis components are actually works?
Thanks & Regards,
Rajesh

Hello,
Check these threads on BASIS:
basis info...!
New in SAP Basis
XI Basis Samples
Note:Points always encourage me to reply !!

What are the accessories do i get when i buy Mac book pro with retina display 13 inches?

i got mac book pro with retina display 13'' 20 days ago. i got charger and extension cable for charger only. what are the accessories do i get when i buy Mac book pro with retina display 13 inches?

MacBook Pro with 13-inch Retina display
60W MagSafe 2 Power Adapter, AC wall plug, and power cord

I want my iPhone to be replaced it is in warranty what are the things required will giving it to service centre

i want my iPhone to be replaced it is in warranty what are the things required will giving it to service centre

http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

What are the key steps & order to follow: changes in my flat file structure

HI,
I have a Cube which sits on ODS.
In the ODS, the are 6 characterisics: Char1, Char2,...., char6; and 3 key figures: kf1, kf2, and kf3.
The ODS is loaded through a flat file.
Through an update rule and startup routine, the ODS updates the cube.
Now, I have a new requirement to add 2 new characteristics (Cha10, char20) and one 2 key figures (KF55, KF66)).i.e. the flat file will now be coming in with these new fields.
I have an idea but this this is the first time I really have to implement, I need to be sure.
What are the key steps that I need to go through and in what order?
Thanks

What version are you running ?
Will you need to load history data as for these new fields or is it just going forward ?
Is it all one to one mapping for the new fields ?
1. Make sure you know to what dimensions you need to add the new chars ? New dimension for these two ?
2. New chars to be made keyfields ?
3. Update Type for keyfigures Overwrite or Additive ?
Enhance the Cube, DSO, change TRFN/TR/UR..

What are the things to be changed when changing page name, model, jws, etc?

Similar Messages

Maybe you are looking for