What are the things we can do in cs4 trial?

Just want to know what features can we do and not do in adobe cs4? In specific can we embed a video into our story? Can we generate an avi (video) as an output? Can we loop frames indefinitely?
PS: I've no prev multimedia experience.

If MPEG compression/decompression figures in, and in any way, you cannot use that.
You can do everything except Export to anything MPEG, if your source files are, for instance, DV-AVI Type II's - just nothing involving MPEG.
Good luck,
Hunt

Similar Messages

What are the things we can do through BASIS?

Hello everybody,
I am newcomer in basis, I wish to know the some of the basic
questions such as,
what are the things we can do through basis?
what are the basis components?
How the basis components are actually works?
Thanks & Regards,
Rajesh

Hello,
Check these threads on BASIS:
basis info...!
New in SAP Basis
XI Basis Samples
Note:Points always encourage me to reply !!

What are the things taken care while using multiple suites?

Hi all,
I have created a plugin which sends the current file path to an url,
its working fine with debugging in Visual studio 2005 and while it is added to the Adobe Illustrator its works only once.
That is its sending the file path only for one file. While i tried for the second time its not working
I am using following suits in my plugin
AIDocumentSuite
AIFilePathSuite
AIActionManagerSuite
AIUnicodeStringSuite
AIURLSuite
I am using the "AIURLSuite" for calling the url and it is calling the url multiple times while its used alone, and its only working once with the multiple suites.
What are the things taken care while using multiple suites? , is it neccessary to release all variables and the suites after completing the task?
Should they released in the same order in which they are acquired?
Thanks in advance
Sreejesh K V

Hi,
The problem was with the "sAIDocument->GetDocumentModified(mod);"
The "GetDocumentModified" is crashing after executing once, i just removed that statement , and now
i am forcefully saving the document with out checking the modification status!
Its working fine now!
Could you please tell me how can we lock a plugin , or a particular function in a plugin.
There is any specific standard to use the GetDocumentModified function?
Thanks and Best Regards
Sreejesh K V

What are the Things required for BI 7.0 Implementation project

Hi Friends,
Can any one suggest me
1.What are the Things required for BI 7.0 Implementation project?
2.System Configurations & Hardware Components?
3. Any additional steps...
plz suggest me.
Regards

Hi lakshmi,
http://csc-studentweb.lrc.edu/swp/Berg/articles/PM_2006_upgrade_NW2004s_Bjarne_Berg_v12.ppt#426,3,Why Upgrade u2013 end of supportu2026
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d163a7-0301-0010-d9b0-98f692ea3c60
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
https://wiki.sdn.sap.com/wiki/x/JYk
Check the following links.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
check the following
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm

What are the entities that can be re-used in different servers, SI App, SI instance? And how?

Greetings,
What are the entities that can be re-used in different servers, SI App, SI instance? And how?
e.g. can I use a deployed IQStreamable@app1 into app2?
can I use a deployed observable/app1/siInstance1/Server1 into another query/app3/siInstance3/server2?
On the presentation titled "04 – Installing, Deploying and Maintaining the SQL Server 2008 R2 StreamInsight Runtime Engine" with file name SQL10R2UPD05-DECK-04.pptx on ecn.channel9.msdn.com/o9/learn/SQL2008R2TrainingKit/Presentations/SQL10R2UPD05-DECK-04/SQL10R2UPD05-DECK-04.pptx
It is mentioned one of the deployment option is "Deployment: Standalone Server"
and it mention the following:
"Use this option for the following scenarios:
- Metadata objects need to be shared between applications
- Event Types
- Adapter Types
- Query Templates
- A data source registered with the server provides an event stream for another existing application"
Could you please provide good example that explain the above statement?
Cheers, Muhammad

First, that statement - and those materials - refer to the "legacy" StreamInsight query/adapter model. They do not refer to how things work with the Reactive model introduced in version 2.1. Specifically, it talks about Dynamic Query Composition (DQC).
You cannot use a deployed Observable in another instance of StreamInsight. You may be able to use them across applications in the same instance - off the top of my head, I'm not sure. I'm getting ready to get on a plane but will take a look at it later.
Typically, however, applications act as containers (comparable to .NET AppDomains) so I don't think that you'd be able to do this easily. That said, the code and assemblies
can be reused across multiple instances/applications. You would have separate instances of the classes involved but you would be able to reuse the query logic. That's a common use case.
Can you be more specific about your use case and what you are trying to accomplish here? It's possible that there are alternative ways to do what you are trying to do.
DevBiker (aka J Sawyer)
Microsoft MVP - Sql Server (StreamInsight)
If I answered your question, please mark as answer.
If my post was helpful, please mark as helpful.

What are the things we need to install on client desktop?

Hi all
I will need to install Peoplesoft Enterprise. However, for my part I will need to try to install it into serveral clients but connect it to a database. Which means that the main database is not in my com but in another com, is it possible that I can still install in my computer without a database and connect my com to the main com database? And I will also like to know what are the things I will need to install or configure into my computer which has no database. Such as do I need to configure PIA, WebLogic Server and etc. Can anyone please help me. I really need help and assistant in doing it.
Thanks

The database has been installed and configured with a given Peopletools version, say 8.52.x. You have to have the same version onto your local machine.
And since you want only third tier connection, no need to have any database client.
PIA is a server process to make front end users be able to connection onto the application using their own browser.
AppServer is a server process allowing people to connect in a 3tier mode, and which manage all the Peoplesoft thingy, exclusively to run on the server to make it available for all.
Batch Server, same as AppServer, exclusively on server side to make job process running out there. Not on any client.
Consequently, download the Peopletools (same version as the Peoplesoft database), configure the 3tier connectivity within the Configuration Manager and enjoy PSoft.
Nicolas.

What are the things to check after full imp in 10g?

Dear all,
Source
=======
OS server ==> HP-UX
Oracle version ==> Oracle 9.2.0.8
DB Name ==> MSST
DB total users ==> 320
Full export in ==> /u02/export/Jan09.dmp
Tablespaces ==> SC, SC_I, SA, SA_I, PP, PP_I, AC, AC_I, SD
Destination
============
OS server ==> HP-UX
DB Name ==> CHDB
Existg DB users ==> 20
Oracle version ==> Oracle 10.2.0.4
copied 9i dump file in ==> /u03/export
Tablespaces created same as Oracle 9i i.e;
Tablespaces ==> SC, SC_I, SA, SA_I, PP, PP_I, AC, AC_I, SD
I had run full import on Destination server i.e; Oracle 10g & following is the command i used:
imp system/pwd@conn_string file=/u03/export/Jan09.dmp log=/u03/export/Jan09_imp.log full=y ignore=y statistics=none
Imported successfully with few errors like
Now my question is
===================
How to check everything is same/similar like Oracle 9i database ( source ), for example ( i used this technique ):
What are the things to check after full imp in 10g?
MSST_DB>SHOW USER
MSST_DB>SA
MSST_DB>select object_type, count(*) from user_objects group by objects;
OBJECT_TYPE COUNT(*)
DATABASE LINK 2
FUNCTION 23
INDEX 1795
LOB 6
PACKAGE 8
PACKAGE BODY 8
PROCEDURE 30
SEQUENCE 67
SYNONYM 60
TABLE 644
TRIGGER 3
VIEW 20
CHDB_DB>SHOW USER
CHDB_DB>SA
CHDB_DB>select object_type, count(*) from user_objects group by objects;
OBJECT_TYPE COUNT(*)
INDEX 1794
PROCEDURE 30
TABLE 644
TRIGGER 3
VIEW 20
FUNCTION 23
SYNONYM 60
PACKAGE BODY 8
SEQUENCE 67
PACKAGE 8
LOB 6

What are the things to check after full imp in 10g?Only public database links which are in use by your these users which you export/import (Only if you did user level export/import and not DB level).
If you log files does not show error during creation of any object, you don't need to double check any thing. Otherwise do on with the method which you mentioned by counting the objects.
Or you can create a database link from source to destination and use a query with MINUS to find out if there is any object missing
select object_name,object_type from user_objects
MINUS
select object_name,object_type from user_objects@destination_database;Salman

Under Option Summary, the usage includes AUDIO, PHOTOS, APPS and OTHERS. What are the things included in OTHERS? It is using up my storage space.

Under Option Summary, the usage includes AUDIO, PHOTOS, APPS and OTHERS. What are the things included in OTHERS? It is using up my storage space. Can someone please help?

To add to Nick's comments, "Other" is typically approximately 1 gigabyte. Occasionally for some users, it gets much (many times) bigger because they have some corrupt files. If that's the case, it's best to restore the iPhone.
Plug the iPhone into (current) iTunes, let it sync, then choose "Restore" on the right. If restoring from the iPhone backup does not help, then restore (again) as new and then manaully sync the iPhone.

What are the things to be tested in sap xi server before going to use th

1) what are the things to be tested in sap xi server before going to impliment first interface?
2)what are prerequisites to be configured in xi server before implementing first interface?
ragards

Hi Dhanush,
>>>>><i>1) what are the things to be tested in sap xi server before going to implement first interface?</i>
>>>>><i>2)what are prerequisites to be configured in xi server before implementing first interface?</i>
For both of your question the answer would be
1. Check all the Post installation configuration has been done properly, with the help of the following links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
2. Make sure the latest BASIS Component have been imported into your design time environment
After this you can start developing your first interface
Regards
Ramesh P

I would like to buy used Ipad 3gen 32 or 64 GB   .What are the things I should check for.(and how to check it) It is cash deal -no warranty.

I would like to buy used Ipad 3 32 or 64 GB.It is cash deal and no warranty. What are the things I should check and how to do it ?

Make sure it is in perfect working order before you turn over any money.
Test connected to Internet.   Test Safari and several other apps for crashes.
If it passes this test, it must now have find my iPhone turned off by the seller.   They must also remove the device from their iCloud account.
*****Please observe this.   If the seller can't turn off find my iPhone, then it is not his iPad to sell.   It will lock when you try to activate and will be worthless.****
If this is the owner of the iPad he can also remotely erase the iPad with iCloud.
http://support.apple.com/kb/HT5661

What are the things we need to take care while moving from 11g to 12c.

Dear All,
One of my client having the application running on 11g and now he wants to move it on 12c.
Now he is asking to me that, what are the things will not work or impacted due to this. Any code level changes, syntax, functions etc are working in 11g and now there is difference or not working in 12c. Could you please help me in this.
Is there any document for all these thing. I searched on google but not able to find any specific doc.
Thanks in advance.
Regards,
ganesh

Gaurav_91 wrote:
Hi,
Moving from 11g to 12c will not impact anything.
Database in 11g will now act as PDB's in 12c.
And what makes you say so? What about the changes/fixes done in the optimizer that would alter the plans? What about if the client wants to use in-memory database option? And your statement that database in 11g will now act as PDB in 12c doesn't make any sense. What if the client is not willing to move to multitenancy? What about the scripts that are running in 11g without any issues and suddenly, will break in 12c due to PDB's ? Do you have any technical reference to validate your claim that there won't be any impact ?
Aman....

What are the tasks we can do with Maintenance Optimizer

What are the tasks we can do with Maintenance Optimizer?

Hi,
All Corrective Packages for SAP NW04 , NW04s and SAP Business suite delivered after 04/02/2007 will only be available via SAP Solution Manager MOPZ
Also it Reduces risk, Increase transparency and Prepared for Future.
Thanks
Vijay Kothapalli

What are the reports we can get from OPM Quality

Dear All,
What are the reports we can get it from OPM Quality module.
I am unable to get any reports abouts Tests, Samples specifications.
Can someone please suggest me.
Regards,
Jon

Pl post details of EBS version.
If 12.1.3, see Chapter 7 of the OPM Quality User Guide - http://download.oracle.com/docs/cd/B53825_08/current/acrobat/121gmdqmug.pdf
The same guide for other versions can be found at http://www.oracle.com/technetwork/documentation/applications-167706.html
HTH
Srini

What are the reporting performances can we do?

What are the reporting performances can we do?

Hi,
General tips
Using aggregates and compression.
Using less and complex cell definitions if possible.
1. Avoid using too many nav. attr
2. Avoid RKF and CKF
3. Many chars in row.
By using T-codes ST03 or ST03N
Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particual day > check query execution time.
Try table rsddstats to get the statistics
Using cache memoery will decrease the loading time of the report.
Run reporting agent at night and sending results to email.This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
Also try
1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
Open the Aggregates...and observe VALUATION and USAGE columns.
"---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
In usage column,we will come to know how far the aggregate has been used in query.
Thus we can check the performance of the aggregate.
Refer.
http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
Note 356732 - Performance Tuning for Queries with Aggregates
Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
/people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
Generate Report in RSRT
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Business Intelligence Journal Improving Query Performance in Data Warehouses
http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
Achieving BI Query Performance Building Business Intelligence
http://www.dmreview.com/issues/20051001/1038109-1.html
Hope this helps.
Thanks,
JituK

I want my iPhone to be replaced it is in warranty what are the things required will giving it to service centre

i want my iPhone to be replaced it is in warranty what are the things required will giving it to service centre

http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne

What are the things we can do in cs4 trial?

Similar Messages

Maybe you are looking for