What are the three drives listed on my iMac?
Just out of curiosity, what are the three drives listed on my new iMac when one performs the diskutil list command in Terminal?
More specifically, what is /dev/disk0 ?
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *121.3 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_CoreStorage 121.0 GB disk0s2
3: Apple_Boot Boot OS X 134.2 MB disk0s3
/dev/disk1 says Apple_Boot Recovery HD which makes sense with the new recovery partition.
/dev/disk2 says Apple_HFS MyDIskName and Logical Volume on disk0s2, disk1s2, followed by a bunch of numbers and characters, then Unlocked Encrypted Fusion Drive. I am assuming tis refers to the actual fusion drive that is mounted on the desktop.
Thank you very much!
Amazon has sync software that uses a Cloud Drive as stated at http://appadvice.com/appnn/2013/04/amazon-cloud-drive-sync-arrives-for-mac
Allan
Similar Messages
-
What are the settings for iPhone, iPad and iMac to sync ical and contacts?
How can I get all three items to sync? What are the settings on the iMac with Lion on board? I put all my stuff on iphone but iMac & iPad do not have the items synced even though I have everything on icloud?
They're asking a question about carrier settings for their iPhone. I think that has everything to do with Apple.
Maybe they did already ask Straight Talk. I've called Straight Talk before... they're not too helpful.
You know, this forum would be much friendlier if people in this forum would quit squabbling, & posting comedic replies, not too mention name calling (like I did), when people are just needing some help.
It's also frustrating that people stick up for the guy who doesn't help, but rather takes the time to post some smart alec reply. Granted, I shouldn't have name-called... some people just frustrate me when they act like that.
Admittedly, there ARE some grey areas when it comes to carrier questions... but let the moderators do their job when someone is asking innappropriate stuff. And if the mods aren't chiming in, then that's a good indication that what the thread is about IS in fact Apple related. -
What are the configuration files ( list them) in DCM repository
DCM Reference Guide says that Configuration information for OHS,OC4J, OC4j applications,OPMN,JAZN are stored in repository. Can any one give me the list of configuration files it is storing? Or How to list them.
betaneptune wrote:
An iMovie project is a bundle?
Yes. What appears in the Finder as a singel file is really a bundle of files.
But what are they?
I can't tell you exactly - but I'm sure there's data there that allows iMovie to undo things you've already done, references the event clips used in the movie, thumbnails, backups, transitions you've used - that kind of thing.
I deleted them on a junk project and so no ill effect, though I didn't check all the things you can do with a project.
Even so, I'd restrict that kind of experimentation to junk projects.
Regardless of whether it's safe to delete them, I'd like to know what they are.
Fair question. I wish I could tell you more.
Matt
Message was edited by: Matthew Morgan -
What are the three steps to start an instance
To start an instance, what should we do and whatâs the meaning of three steps of the oracle instance startup?
Jau-Wei Ju-Chen,
Your question is in two parts
1. To start an instance, what should we do and
2. Whatâs the meaning of three steps of the oracle instance startup
To start Oracle Instance, you would need to do the following
1. Log in sqlplus as sysdba
sqlplus /nolog
connect sys as sysdba
2. You would need to check whether the instance is runing or not. give command
show sga
3. If it shows a message "ORACLE not available", then your DB is down and you can issue command
startup
This would automatically start the instance (tells Oracle to go through all three stages of the startup process)
Three steps of the oracle instance startup
You can also start by giving
startup nomount;
alter database mount;
alter database open;
1. startup nomount
This create the SGA. Control file and datafiles are not accessed at this stage. The database is unavailable to the users
2. alter database mount
This checks the control file, collects all the information about the DB.. like what all datafiles are there and where they are kept, still the datafiles are not accessed. The database is still unavailable to the users.
3. alter database open
Using the control file, Oracle checks SCN on each datafile. If there is a mismatch, then recovery is done from redo-logs. Database is opened. From this point onwards database is available to user. Enteries in the rollback segment are rolled-back after opening the DB.
Hope this makes it more clear. -
What are the users exception-list equivalent in deployment rules?
Our users run a webapp that runs fine when the url is placed in the exception list, but I am experiencing difficulties getting it to run with deployment ruleset. I know the ruleset works, as it works on other apps.
What is the equivalent setting in the deployment ruleset?
This does not work:
<rule>
<id location="https://test.example.com" />
<action permission="run"/>
</rule>
So what action should I apply to make it the equivalent of the exception list? "Default"?More info:
<jnlp codebase="https://solo.nordea.com/FileTransfer-richclient-webapp/">
<information>
<title>File Transfer</title>
<vendor>Nordea</vendor>
<homepage href="index.html"/>
<description>File Transfer Rich Client application From File</description>
</information>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.5+" initial-heap-size="128m" max-heap-size="512m"/>
<jar href="FileTransfer-richclient-6.2.9.jar" download="eager"/>
<jar href="thirdparty-1.2.6.jar" download="eager"/>
<extension name="filetransfer-dependencies" href="filetransfer-dependencies.jnlp"/>
<extension name="activation" href="activation.jnlp"/>
</resources>
<application-desc main-class="com.nordea.filetransfer.client.controller.MainViewController">
<argument>DOWNLOAD</argument>
<argument>no</argument>
<argument>44420005443231051</argument>
<argument>NSSO-030BASE64--NSSMD5--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</argument>
</application-desc>
</jnlp> -
What ARE the options for these fan-disabled iMacs?
I have started this as a new topic so as not to upset the members contributing to the below subject re. fast running fans :-
http://discussions.apple.com/thread.jspa?threadID=2372777&tstart=0
The aim is to gain some practical advice for myself and others sharing the same problem.
My machine is a 4 yr old 6,1 iMac which 6 months ago started with this 'fans running too fast problem'. Initially intermittent, I am now in a position where my CPU and OD fans run at 4000-6000 rpm constantly when the machine is on. Progressing further the fans are now actually staying on for a full 5 minutes after I have properly put the machine to sleep. I have tried all the practical advice given in the above topic/thread to no avail.
Apple at the Trafford Centre were very helpful indeed and ran the diagnostics and hoovering for me last month and formally stated that it was due to CPU temp sensor failure - I was quoted £411 all in for a repair (logic board replacement required) but I came home with it to think. They tended to agree that it might be unwise to spend this when the machine is 4 yr old and may fail again for other reasons.
Working with this constant hum is driving me insane, I am just one of those who cannot stand it and soon therapy costs will kick in! Not to mention the wasted wattage. My idea is to buy a Mac Mini and tie it to an HP display for around £620 but does my iMac just go in the bin when it is fully functional otherwise?? Tried ear plugs, but my wife started slapping me to get my attention.
I could not bear it going for £70 on eBay, but I suppose I could harvest the HDD drive and RAM. Trading in seems to be a non-starter really. Joking apart, there must be people who are 'hard of hearing' who could benefit from this ever growing cohort of otherwise perfect machines?
My confidence in Apple has been reduced, especially when you others are getting the same problem out of the box! My only criticism was that the 'genius' I saw had not heard of the issue - despite the above thread. Finally there is the embarrassment when visiting friends ask what is drowning out the noise from my Thomson Freeview box and fish tank pumps!
Can't help thinking that beautiful 'exterior design' has impeded simple repair of a minor component.
Helpful, non technical suggestions gratefully received.Distasteful as it is, it is generally not practical to repair motherboard level problems in contemporary consumer class electronics like iMacs. This is not so much because other things might fail but because motherboard repairs are themselves risky even for skilled technicians with all the specialized tools required.
Motherboards in these things are complex multilayer sandwiches of printed circuit traces with plated through holes making connections among them, tiny surface-mounted components, & other features that are well suited to economical highly automated mass fabrication but make most repairs a difficult & delicate operation. This is especially true for high speed electronics: not only must great care be taken to apply exactly the right amount of heat to remove & replace defective components without damaging them, adjacent components, or the motherboard circuitry itself; but also just not duplicating the shape of the newly soldered connection closely enough to the original can cause mis-operation because the affected circuits no longer meet the minimum bandwidth specs necessary to always process high speed signals correctly. (See the section in the Wikipedia reference titled "Reworking defective SMD components" for more about this.)
Of course, the motherboards could be designed with more easily replaced sub-assemblies like daughterboards & socketed components, but this both increases costs & significantly reduces achievable performance unless even more costly techniques are used in the initial design. This in turn increases bulk, requires more complex & expensive cooling systems, demands larger power supplies, & so on.
Basically, to do this right, you end up with something a lot more like a Mac Pro than an iMac, with a price tag to match.
In terms of your options, you can try to find a tech willing to work on the motherboard, but keep in mind all of the above about this kind of repair. You might be lucky. It may even turn out that the bad sensor is not on the motherboard or in the CPU itself, making the repair relatively simple & risk free. -
What is the "cloud drive" for on my imac
I just noticed "CLOUD DRIVE" listed under My Favorites on my iMac - what is it for?
It has three folders "Documents" - "Pictures" - "Videos" listed, but nothing is in them.Amazon has sync software that uses a Cloud Drive as stated at http://appadvice.com/appnn/2013/04/amazon-cloud-drive-sync-arrives-for-mac
Allan -
What are the three dots...
on the top right of the contacts screen? mine seems to always have the first and third empty and the second (middle) one is red. I have not figured out a way to change it or what it might signify. anyone know?
Left panel is History. Center panel is master list. Right panel is Status Updates. Note the red dots in the upper right corner of your screen signify each
I need kudos, give me kudos!! -
What are the three openings on the front of the white iphone?
I have searched everywhere for this answer. Speaker, Camera, and ?????
the other slot is the proximity sensor along with the ambient light sensor.
-
What are the symptons of macbook pro hard drive not running fast enough
what are the symptons of the hard drive not running fast enough
Physically the drive will be as fast as any other of its class, and if not then it's experiencing a mechanical issue that should prompt a warning or two in the system, especially if you use a drive management tool like Disk Utility that checks the drive's built-in "S.M.A.R.T." diagnostics.
As for "logical speed," if there are bad blocks on the drive where sectors cannot be read or written to because of a breakdown of the storage medium, then this can result in a program or the entire system crashing or hanging (generally the latter is the case), where it usually pauses for a number of seconds at a time. This is usually accompanied by messages that state "I/O Error" or other similar warning in the OS X Console (in the Applications > Utilities folder).
Beyond this, drive formatting errors such as might happen after a crash or power outage can result in similar hang-like behavior, though this is usually not as distinct of a hanging behavior as is seen with bad blocks.
Finally, if the drive is simply full of files or highly fragmented (not as much of a problem in OS X, but it can happen), then this can reduce access time for reading and writing files, and prevent the system from optimizing the use of RAM, which can result in overall slowdowns. Heavy drive use can also cause similar bottlenecks, but this is ususally only an intermittent issue during a time when you are performing a heavy file transfer or copying process, or other task that occupies access to the drive's index and formatting (e.g., if you check it for errors with Disk Utility, then you may see the system pause or slow down during the check). -
What are the minimum requirements to successfully Synchronize a SharePoint 2010 Calendar or Task List with Outlook 2010?
SharePoint permission levels required for the user profile?
Does the user need top level permissions on the SharePoint site?
What other minimum requirements must be met for Outlook 2010 to synchronize successfully with SharePoint 2010?
TheDrapeHi,
To synchronize these libraries and lists, you must have Outlook 2010 installed on your client computer and you must have Collaborate permission to the library or list.
You don’t need any permissions for the user profile.
I provide you a link about synchronizing SharePoint 2010 content with Outlook 2010 for your reference:
http://office.microsoft.com/en-us/sharepoint-foundation-help/synchronize-sharepoint-2010-content-with-outlook-2010-HA101881295.aspx
Thanks,
Rock Wang
Rock Wang TechNet Community Support -
What are the different ways to back up your photos from iphoto using a MacBook Pro which does not have a disk drive?
Note - that no internet backup service has been proven to be safe and effective for backing up the iPhoto library - unless you personally have backup uyp an iPhoto library and restored it sucussfuly form one it should not be recommended - a large number of people have lost their photos trying it
LN -
I accidentally deleted my media files from iTunes and Trash when I was trying to move the files to an external hard drive. Is there a way to restore the media files from a Time Machine backup or from iTunes Match? What are the steps to do this?
If you have been backing up on Timemachine.
All you need to do is enter time machine... Then the rest is obvious.
Find the iTunes folder and hit 'Restor'.
If not the only way to get all your iTunes music back is to enter iTunes Store.
On the right hand side you should see 'Purchased'.
Click 'purchased' and there you have it. -
What are the steps to follow after you install a new Hard Drive on a 17in Macbook Pro mid 2009
I plan on installing a larger Hard Drive..the physical part is simple..but what are the steps after you close it up and hit the power button? Is there softwre on the mother board that will start the unit running??
A new Hard drive will not be Mac-formatted, so you will have to do that first. A copy of Disk Utility to do the job is also on the 10.6 Installer/Utilities DVD.
Boot to the installer DVD, but do not Install. Answer only the "what language" question, and wait a quarter minute for the menuBar to be drawn. Choose Disk Utility from the Utilities menu that appears.
Select the Hardware_name of the new Drive. Partition, one partition, ( Options ), GUID partition table. Name the partition: MacIntosh HD and choose Format: Mac OS X Extended (journaled). It will complete in a minute or two, as it only rewrite the Directory area.
If you wish to shake out your drive, you can erase it and Security Erase, Zero all data, one pass. But this takes HOURS. -
What are the list of .stock by storage location
hi, iwant to devlop the report to stock by storage location.give me description about a report to list of .stock by storage location. what are the functional spects for this report, what are the tables and fields we have to used for this report plz give me sample report.
Dear Radha Krishna,
You can either use program RMMMBESTN (from SE38) or TCode MMBE. However, you can copy the above program into a 'Z' program and change the logic if your requirement is not served by the standard report or you want to enhance the same.
Go through standard Reports:
MMBE Stock Overview
MB52 List of Warehouse Stocks on Hand
MB53 Display Plant Stock Availability
MB54 Consignment Stocks
MB5B Stocks for Posting Date
MB5K Stock Consistency Check
MB5L List of Stock Values: Balances
MB5T Stock in transit CC
MB5W List of Stock Values
MBBS Display valuated special stock
MBLB Stocks at Subcontractor
MBSF Release Blocked Stock via Mat. Doc.
MBW1 Special stocks via WWW
MC.1 INVCO: Plant Anal. Selection: Stock
MC.5 INVCO: SLoc Anal. Selection, Stock
MC.9 INVCO: Material Anal.Selection,Stock
MC.D INVCO: MRP Cntrllr.Anal.Sel. Stock
MC.H INVCO: Business Area Anal.Sel. Stock
MC.L INVCO: Mat.Group Analysis Sel. Stock
MC.P INVCO: Division Analysis Sel. Stock
MC.T INVCO: Mat.Type Anal.Selection Stock
MC48 INVCO: Anal. of Current Stock Values
MC49 INVCO: Mean Stock Values
MC50 INVCO: Analysis of Dead Stock
MC8M Read Opening Stocks
MCB) INVCO: Long-Term Stock Selection
MCC4 Set Up INVCO Info Structs.from Stock
MCH: RIS: STRPS/Mvmts + Stock - Selection
MCKJ Selection version tree: Stock
MCKR User-spec. sel. vers. tree: Stock
MCNB BW: Initialize Stock Balances
MCSK Call Standard Analyses of Stocks
MD04 Display Stock/Requirements Situation
ME27 Create Stock Transport Order
ME2O SC Stock Monitoring (Vendor)
MF65 Stock Transfer for Reservation
MI35 Batch Input: Post Zero Stock Balance
MIQ1 Batch Input: PhInvDoc. Project Stock
MM73 Special Stocks: Preparation
MM74 Archive Special Stocks
MM75 Display Archive of Special Stocks
MMBE_OLD Stock Overview
MMN1 Create Non-Stock Material &
MS04 Planning Scenario: Stock/Reqmts List
MS29 Calculate Sim. Initial Stock
Tables:
MKPF Header: Material Document
MSEG Document Segment: Material
IKPF Header: Physical Inventory Document
ISEG Physical Inventory Document Items
SBSE Stock Mngmt Levels for Inventory Sampling
SKPF Header Data: Inventory Sampling
SLGH Elements of Stock Population
SSCH Strata of Inventory Sampling
T156 Movement Type
MSKA Sales Order Stock
MSKAH Sales Order Stock: History
MSKU Special Stocks with Customer
MSKUH Special Stocks at Customer: History
MSLB Special Stocks with Vendor
MSLBH Special Stocks at Vendor: History
MSPR Project Stock
MSPRH Project Stock: History
MSSAH Total Sales Order Stocks: History
MSSL Total Special Stocks with Vendor
MSSQ Project Stock Total
MSSQH Total Project Stocks: History
http://goldenink.com/abap/files_in_sap.html
http://www.erpgenie.com/abap/tables.htm
Regards,
Naveen.
Maybe you are looking for
-
I have a samsung lcd and it will power on but the screen remains black. Is this worth fixing or should I throw it out?
-
Cann't preview , publish , test debug Flash Movie.
Now, I am using Adobe Flash CS3 and press CTRL + Enter to preview the movie , but now I Cann't do it , the movie isn't display anything ( but I can preview only one scene by press CTRL + ALT + Enter). I try to publish the movie, the error message is
-
HI, I have a cluster bar chart that runs well with one query. The problem occurs when you add more than one series. I get an SVG Chart error ORA-20001 The only differenece is that the second and third series would have a distinct[b] resolution_type.
-
How to set focus on only one window?
Say, I have a main window with a button inside, and if the user presses on that button, another warning window with an OK button inside will then pop up. Now the question is how can I disallow the user from returning back to the main window unless th
-
EA2/EA1 - SQL Developer freeze in file editor
I had a PL/SQL local file open (.pkb) with a database connection selected and compiled the file. There was a compilation error and when I went to correct it, SQL Developer froze (before my typing had updated the file). I had the console open and it s