What are the units for the power spectrum output? (units in)^2/Hz?
I can't seem to find the answer in the manual that came with the software or anywhere online. Maybe I am just looking in the wrong places.
Thanks
David
Hi David,
I assume you are referring to the step, "Power Spectrum", in Analysis»Frequency Domain Measurements
Per the help that I see, "This step can return the spectra in root-mean-square, peak, and peak-to-peak
units."
Also, in the configuration tab of the step, for magnitude you can select either dB or linear.
Hope that helps!
-Sam F, DAQ Marketing Manager
Learn about measuring temperature
Learn how to take voltage measurements
Learn how to measure current
Similar Messages
-
The Unevenly Sampled Signal Spectrum.vi has two outputs, Power Spectrum FFT(X) and Power Spectrum FFT(X) Frequency. Can anyone tell me what's the unit for Power Spectrum FFT(X) if the input signal unit is volts. Also, is this VI equivalent to producing a PSD output?
Hi,
The power spectrum will be in units of Vrms^2 which are power units. There is a very usefull VI that you can use to easily transform the units of your spectrum; the VI is called Spectrum Unit Conversion.vi. You select the type of spectrum that you have and the units that you want it to be converted to.
Here is a good document on spectral measurements in genereal:
frequency spectrum
I hope this helps.
Regards,
Juan Carlos
N.I. -
For getting purchase order details what are the inputs and outputs
I need to display purchase order details in EP portal by using integration EP, XI and R/3.
I dont know what are the Inputs and what are the Outputs.
Reward points for helpers.
Cheers,
PreethikaHi Preethika,
for displaying PO use BAPI : BAPI_PO_GETDETAIL
Its input is PO number
Its output are tables PO_HEADER_TEXTS - for PO header data
PO_ITEMS - for PO line items
Thanks,
Rajeev Gupta -
Inspire T3030 Speakers - what are the power adapter specs (need replacement)
Hi, My grandparents were given a set of T3030 speakers as a gift last year, but now have somehow managed to misplace the power supply. Creative doesn't have a downloadable manual for this product. Could someone please give me the adapter's specs so I could by an replacement?Thanks in advance!
Thanks! Couldn't find the manual on the US site. Hope the power adapter specs (2v 2.9a) are accurate for us Yankees.
-
What are the DC power limitations for the ipad.
What are the DC power limitations for the ipad in a car or airplane. Can I use and recharge the ipad in a car or airplane with a 28 VDC power system?
The iPad charger produces 5V and 1000 mW. You would need an convertor accessory which is compatible with the iPad charging system and produces these output levels
-
I've read that Promise Pegasus2 R6 thunderbolt 2 series does not sell replacement parts (no replacement parts for any of the Pegasus line). I'm buying the new MacPro but am concerned about spending $2K for storage (12tb version) that may break and cannot be fixed (am told that one must purchase a new unit if a part breaks). What are others buying for storage for the new MacPro? Thanks so much for your help.
Discussion about this issue at MacWorld.com: http://www.macworld.com/article/2082783/first-look-promises-pegasus2-r6-thunderb olt-2-raid-array.htmlI've used the original Pegasus R6 units for a couple of years now and have been very pleased with them. On the two occasions I've had to call on their technical sujpport, I've found them readily available, knowledgeable, and very helpful. In one case it involved the reset of a unit after a power failure at an inopportune time; in the other case it was a question about upgrading disk drives to higher capacities (1 Gb gto 4 Gb). I was pleased to learn that their tech support people were in California and as good if not better than upper-tier AppleCare reps. The hardware itself has functioned flawlessly so far.
-
My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.
Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius -
What are the best archiving methods for small colleges?
Hi Folks,
Im thinking a few terabyte hard drives will be my best option for a hundred dollars each.
We have a small operation here at a New England college with two editing systems that get a good amount of student use and use by myself for college needs. Some of the student work will get deleted at the end of each semester, but I need to save all the college's video.
What are the best ways to archive? Some of my concerns are cost and space. I can afford a few externals, do any of you have a nice cheap solution?
I understand if I am to go the route of archiving on externals I should have a backup of my backup, do any of you guys have any feedback on ghosting your backups, is that common?
thanks
MikeIf it's JUST for backup (not operation), you can get bare drives and either an enclosure for 1 or 2 drives with no tools trays (like the ones from Sansdigital: about $120 for a 1 drive enclosure) or a device like the UltraDock from Wiebetech (I use the latter). Physically install (or connect in the case of Ultradock) a bare SATA II 3.5" drive, connect it via USB 2, Firewire, esata, initialize/erase it, and then copy your files.
Then store the drive carefully in the foil anti-static bag it came in a dry location where it won't get jostled about by errant students (or kids in my house).
The savings in not getting full drive enclosures in the cost of multiple power supplies and interfaces. You pay for that once with the mountable enclosure / drivedock, and thereafter, just buy bare drives.
I also like another reply: have the students provide drives on which to back up their projects. A friend of mine has a ProTools audio studio, and part of his "set up" charge, is $100 for a bare drive that he will archive for 5 years, or the client can take with him at the end of the project (when the bill is paid).
Eddie O -
What are the two different rules for organizational data determination
What are the two different rules for organizational data determination???
Hi
1) Rule type Responsibilities
want to determine organizational data for individual responsibilities
have not created an organizational model but want to create one
have a lot of organizational units and must only assign a few attributes
2) Rule type Organizational Model
You would use rule resolution using organizational model if you
have created an organizational model or have distributed a plan to SAP CRM and also want to use this for determining organizational data
assign a lot of attributes to the organizational units and these are to be evaluated
Regards
Manohar -
What are the Non SAP data sources supported for Analysis workbooks?
AO 1.4 SP6
BO 4.1 SP2
What are the Non SAP data sources supported for Analysis workbooks?
Thanks.HANA is a data source (which could contain non-SAP data)
For other Excel front-ends that may connect to "non-SAP" data look at Live Office or Power BI by Microsoft - see Excel and Power BI connectivity to SAP BusinessObjects Universes | Power BI -
What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP's?
What are the features supported in Cisco Prime Infrastructure for WLAN for autonomous AP’s?
• PI provides visibility for autonomous clients within the same list view as lightweight and wired clients (client list page).
• Rogue AP detection for autonomous AP's is not supported (it's supported in CUWN).
• Alarms/events for client authentication issues (e.g. authentication failure) are displayed in PI.
• Config management for autonomous AP's is via CLI template. Config comparison and archiving functionality in PI leverages these same features that were brought in from LMS, so need to defer to others in terms of whether this is a cross-platform feature in PI or is only supported on a subset of platforms. Config comparison/archive is supported in CUWN.PI supports both infrastructure (e.g. AP Tx Power and Channel, busiest AP, AP utilization, etc.) and client (e.g. client count, client sessions, etc.) reports, and there are extensive reports for CUWN -
What are the settings for Primere Elements 9 if I've filmed with a Canon Powershot sx50 HS?
I just got this camera and I want the best quality possible. Unfortunately, it's hard for me to fully know if the settings I try create that. I get a fuzz or noise on objects like if I'm wearing a black jacket it's like static. When I put the video on my phone which is an Android Galaxy s4 it converts it into mp4 format and I get much more clear results than on my computer which perplexes me. I did a lot of trial and error with my previous camera (JVC Full HD Everio) which I got the same results. My newer Canon should be leagues ahead of the JVC, but I really can't tell as of yet. If anyone could help that would be awsome. I have examples of my trials and errors from my Youtube videos which you can see I felt I was slowly making progress with the JVC Oppositeofhood - YouTube
Opposite
Then I saw your latest post
Wait, I think I just found it. I pressed record on different settings to take pictures with like portrait to see if it would make a difference and when I uploaded them to my computer I found where it shows the BIt rate and it varied. They run at 23 frames per second 1920 x 1080 MOV video files and all the Bit rates are like 36,356 35,414 ,36,521
If your camera is recording with a variable bitrate, the Bitrate variations from file to file should not be contributing to the issue. But it does raise the issue related to whether or
not we are setting the appropriate bitrate level in the export settings. What are the units for 36,356, 35,414, and 36,517 -
kbps (also can be written Kbps) and is kilobits per second
or
Mbps which is megabits per second.
Let us try this for one of your 1920 x 1080p24 videos.
Go through the following workflow
Manually set project preset...
NTSC
DSLR
1080p
DSLR 1080p24
When you go to export your edited Timeline content, then use
Share
Computer
QuickTime
with Presets = NTSC DV 16:9 - that is going to be customized to 1080p24 (H.264.mov) under the Advanced Button/Video Tab of that preset
The essential settings under the Advanced Button/Video Tab
Video Codec = H.264
Frame Width = 1920
Frame Height = 1080
Frame Rate = 23.976
Field Type = Progressive
Aspect = Square Pixels (1.0)
Now here is where we are going to experiment....
Bitrate
Check Mark next to Limit Data Rate to and type in 36000 before kbps
note the file size of the export as well as the quality of the playback.
Repeat the whole process but in export
Remove the check mark next to Limit Data Rate. The Bitrate field will be disabled.
note the file size of the export as well as the quality of the playback.
We will be watching for your results.
Thanks.
ATR -
What are the units of the DAQmx counter?
Hello,
I created this VI and several similar ones a few months ago, but, I have forgotten some of what I did back then. I believe that this VI should measure period, using the counter on the DAQ chassis. Can anyone tell me the units of the period measured? I think it is seconds, but, I am trying to figure out how to figure that out! The values of the period are generated by the DAQmx READ function in the WHILE loop. What units is that function outputting to the array? What are the units of the array elements, essentially? See the attached VI.
Also, how do you know? I opened the DETAILED HELP for the DAQmx Read (Counter 1D DBL NSamp) shown in the VI but, I can't find anything on the units of the data coming out of the terminal labeled DATA with the orange wire, which is actually an array of periods, and we take the average of the most recent 15 or so period measurements.
I had a suggestion months ago for an online NI manual containing a description of Buffered EdgeCounting measurements, but, when I went to find it, the link had been changed by NI, so, I can't find that manual, but, I think the answer is probably there, because I recall that manual being very useful when I did this before.
Thanks for the guidance.
Solved!
Go to Solution.
Attachments:
continuously measure period buffered_singlechannel_forum Nov 13.vi 33 KBHI dav2010,
When you create a Virtual Channel, you should specify the units the counter task will use. There are several options which are listed in the help here:
http://zone.ni.com/reference/en-XX/help/370469AA-01/lvdaqmx/mxcreatechannel/#DAQmxCreateChannel%28CI...
I am not on a computer with LabVIEW right now, but I believe the default should be ticks, which is the number of ticks of your device's timebase. You can find that information in your hardware specifications.
Regards,
Chris E.
Applications Engineer
National Instruments
http://www.ni.com/support -
What are the table names for CRM and APO?
hi friends,
what are the table names for CRM and APO?
Regards
suneel.hi Suneel,
check in crm forum
Re: SAP-CRM Tables
BUT051 BP Relationship: Contact Person Relationship
Similar to BUT050 , additionally contains Contact Persons Address data
BUT0BK Business Partner: Bank Data & Details
BP Number, Bank Key, Bank Country Key, Bank Account Number
BNKA Bank Master Data
BUT100 BP: Roles
ADR2 Telephone Numbers (Business Address Services)
ADR6 SMTP Numbers (Business Address Services)
Contains Email Id of the BP.
ADRC Addresses (Business Address Services)
BPs Complete Address Details- City, Country, Post Code, District, Street, Title No Etc
TSAD3T Table containing the Title text against a Title No.
COMM_PRODUCT Master Table for Product
CRMM_BUAG Master table for Business Agreement
CRMM_BUAG_H Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU CRMD_ORDERADM_H Contains the Header Information for a Business Transaction.
Note:
1. It doesnt store the Business Partner
responsible for the transaction. To
get the Partner No, link it with
CRM_ORDER_INDEX.
2. This table can be used for search
based on the Object Id(Business
Transaction No).
CRMD_CUSTOMER_H Additional Site Details at the Header Level of a Business Transaction
CRMC_PROC_TYPE Master table Business Transaction Type
CRMC_PARTNER_FCT Definition of Partner Functions
SCPRIOT Priorities for Activities with priority text.
CRMC_PROC_TYPE_T Text for a transaction type
CRMC_ACT_OBJ_T Objective Number and Text for Activities
TJ30T All the status code and text
CRMC_PR_ASSIGN : Transaction Type and its Transaction Type Object.
IBIB : Installed Base/Ibase
IBIN : Installed Base Components
COMM_PRODUCT : Products
CRMC_T077D : customer account groups
CRMD_ORDERADM_H (for header) CRMD_ORDERADM_I (Item data)
CRMD_ORDERADM_H Business Transactions CRM
CRMD_ACTIVITY_H Activity
CRMD_OPPORT_H Opportunity
BUTOO : Customer details
BUT001 BP: General data II
BUT100 BP: Roles
BUT150 BP relationship: Attribute table (test
different
BUT_HIER_TREE Business Partner Group Hierarchy
CDBC_T_PRODUCTID Mapping: Product Id
CDBD_ORGMAN Business transaction - organizational unit -
set
COMC_PRODUCT General Product Settings
COMC_R3_FIELDS Assignment of R/3 material master fields to
CFOP
COMM_CATEGORY Category
COMM_CFGMAT Basic Data for Materials
COMM_HIERARCHY Category Hierarchy
COMP_TYPES Hierarchy Tool: Comparison Type Check
Table
CRMC_CPRICPROC Customer Pricing Procedures
SMOKVBEZ15 Assignment employees to positions
CRMMLSGUID: GUID entry (should match GUID in CRMPRLS)
CRMM_BUT_CUSTNO : Also GUID table (GUID here should match GUID in R/3 table CRMKUNNR)
SMOFSUBTAB : Mapping & Parameters
SMOFDSTAT : Download Monitor (R4AM1)
SMOFFILTAB : Filters (Should match filters in R3AC1 & R/3 Table CRMFILTAB)
SMOFOBJECT Definition of Objects for Download
SMOFOBJPAR Parent Objects of an Object in Table
SMOFPARSFA Middleware Parameter
SMOFQFIND Queue Finder Table for MW-Queue finder
SMOFTABLES Definition of Tables for Download -
Any report to see what are the users assigned to an org-unit ?
Hi All,
Is there any standard report available to see what are the users assigned to a particular org-unit?
I'm looking for complete list of users assigned to a particular org-unit both directly and indirectly/
Thank you so much in advance !!
Cheers,
Gyan.Hi,
None of them actually helped.
Trx PC00 is not available in 4.0 sytem. And from the table mentioned i don't see the org-unit value. Could you please elaborate on this.
Thanks,
Gyan.
Maybe you are looking for
-
Can't stop sounds embbed in movieclips timelines
Hello i have a big problem. I searched everywhere but no answer.i have a main Movie containing many movieclips with sound atttached in their timeline. When i change to a different frame from my main movie ( Main Timeline) the sound from my old mov
-
Is there a phone number where I can call someone? The phone number in your web page is missing a number. it is listed as 1-800-426-570? One number missing. I just paid with my credit card online for photoshop and it is not allowing me to log in in or
-
I can't get the photoshop blur filters to work! Help.
Hello, I can't get the new photoshop cs6 blur filters to work. The menu's are all greyed out. Why? I purchased my membership to the cloud, downloaded the applications (as I'm a former CS5 user), watched some great video's on some of the new featur
-
InvalidCastException on LyncClient.GetClient()
I cget an exception on "LyncClient.GetClient()" - I've tried this one two different machines, and I'm getting the same results. Here are the details: Visual Studio 2012 Lync 2013 Client installed, with silverlight (part of Office 2013), and running/s
-
Hi everyone. I recently erased and reinstalled Yosemite on my iMac 27 (model late 2013). After I reinstalled everything i've noticed that when it goes to sleep/nap and when I come back to it and open the browser (safari) it will not load. I have to r