What are the usb ports for

Why does atv have usb ports does it suport an external hard drive?If not what are they on the unit for. Thanks

The USB port is for servicing and maintenance only.

Similar Messages

  • So what is the USB port for anyways?

    I hear that we can not use the USB2 port with Hard drive, so what is it for?

    The USB port is intended for internal Apple usage, such as troubleshooting; it is not usable by customers except through hacks.
    (28993)

  • What standards are  the USB ports on a Dual 2.3 GHz PowerPC G5?

    What standards are the USB ports on a Dual 2.3 GHz PowerPC G5? USB1 or USB2? If USB1, is there a card to equip the computer for USB2 or USB3?

    USB 2.0. USB 3.0 is not yet supported in OS X. You can purchase USB 3.0 cards for Macs, but I don't know if they work in your slots. See www.caldigit.com, for example.
    Message was edited by: Kappy

  • What are the security risks for opening port 80 on workstations?

    Hello all,
    in our environment, there is an application which open port 80 on workstations when installed, but it is not allowed on preimeter FW
    could you please advise what are the security risks for leaving port 80 opened on the workstations? or it is considered secure unless it is not allowed on the preimeter FW?
    thanks alot & regards

    Hi R.Naguib.
    The 80 port is open by default through the firewall on Windows system, it is used by a http protocol by a browser.
    As for the network or hardware Firewall settings, I suggest to turn to the network administrator for details.
    Regards
    Wade Liu
    TechNet Community Support

  • What are the different ports required to Deploy(Run) an application in NWDS

    Hi all,
    We have a issue here in deploying our application in NWDS. As we are accessing our servers(from another country) thru firewalls in between, most of the ports are blocked for security reasons,henceforth, we are unable to deploy our application in NWDS.
    Initially port 3601 was blocked, now its open.when i try to deploy my application , it prompts for a SDM password, after i enter it , it gives me error saying it can't process thru 50018 port.
    So my query is , to build,deploy and run or debug  a application in NWDS what are the different ports that needs to be accessable ?( so that i can tell my basis guys that all this specific ports need to be opened )
    (Note:  will the SDM port, debug port,Http port be enough to deploy and run an application)
    Need your help on this
    Regards,
    Vijay

    Hi Arun,
    Thanks for your reply, as you told port 3601, its already opened. I didnt understand about the 3200,3300,3299. Can u be more clear about why each of this port is used for? ( bcoz i need to give a reason to my Basis guys,what each port is for)
    Hope this Log details of the error that I get here helps you:-
    <i>Settings
    SDM host : "ServerName"
    SDM port : 50018
    URL to deploy : file:/C:/DOCUME1/abap1/LOCALS1/Temp/temp22390Welcome.ear
    Deployment exception : Server "srvName" did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to server "srvName" at port 50018: "srvName"
    Inner exception was :
    Server "srvName" did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to server "srvName" at port 50018: "srvName"</i>
    appreciate your valuable inputs.

  • TS1490 What are the Proxy, Port and Server settings supposed to be?

    What are the Proxy, Port and Server settings supposed to be for itunes (windows 8)?
    I havent been able to access itunes store for WEEKS, and i have gone through nearly everything to try and resolve it.

    http://support.apple.com/kb/TS1490

  • What are the correct settings for my WRT54GS for using remote access on a Windows Home Server?

    I can not remotely access my Windows Home Server from outside.  What are the correct settings for my WRT54GS?

    I have opened ports 80, 443,and 4125 to PCP.  The  router address is http://192.168.1.1, my address is 221.40.138.170.
    Thank you.

  • What are the field names for below mentioned

    Hello Friends
    What are the fields names for below tables
    in EKKO
    Purchase Document Date
    Net Value of the purchase document.
    In EKPO
    Item Description
    From which place We bought it. (It means in Sales Items there we can know from which plant we sold the goods, like in EKPO, there is any field like this)
    Please let we are defining the report to find out the stock availability for perticular storage location using select Options plant, company code, material no.
    How many tables involve her to build this report. and also field names, they come under which table.
    Please send me this information ASAP. PLz Plz Plz..........
    Regards
    Praveen

    You can check the fields of these tables via SE11
    Purchase Document Date  -  EKKO-BEDAT
    Item Description  -  EKPO-TXZ01
    Net price per item - EKPO-NETPR.
    Regards,
    Rich Heilman

  • What are the ideal specs for a DigiBeta master tape when authoring a "widescreen anamorphic" 16:9 SD DVD (original aspect ratio is 14:9)?

    I just received the masters for a new SD DVD. I would like to author a "widescreen anamorphic" SD DVD horizontally squeezed widescreen image stored in a standard 4:3 aspect ratio DVD image frame. (On 4:3 displays, mattes should preserve the original aspect ratio. On 16:9 displays the image will fill the screen at the highest possible resolution.)
    Below I've listed the specs of the Digi Beta master tapes the producers have sent to me for digitizing. I'd like to know this: What are the ideal specs for a DigiBeta master tape when authoring a widescreen anamorphic SD DVD, using material with an original aspect ratio of 14:9?
    I've also listed my guesses below. Please let me know if my guesses are right. If not, please suggest alternatives (and if possible explain why.)
    TECHNICAL SPECIFICATIONS OF EXISTING MASTER:
    Tape: DigiBeta
    Original Aspect Ratio: 1.55 (14:9)
    Vid Rate: 29.97 fps
    Pixel Aspect: NTSC - CCIR 601
    Frame Size: 720 x 480
    Anamorphic: Full-Height Anamorphic (16:9 image displayed in letterboxed, non-distored 4:3)
    Display Format: 4:3 Letterbox
    MY GUESS AT IDEAL TECHNICAL SPECIFICATIONS (for a DigiBeta, that is):
    Tape: DigiBeta
    Original Aspect Ratio: 1.55 (14:9)
    Vid Rate: 29.97 fps
    Pixel Aspect: Square
    Frame Size: 720 x 540
    Anamorphic: YES
    Display Format: 16:9 Anamorphic (horizontally squeezed widescreen image)
    Please feel free to ask for clarification or further information you need to answer my question.
    Thank you so much in advance for your help!
    Best, Noetical.
    BTW, I can't wait for the day when everything has gone digital and we get digital intermediates instead of tapes to digitize!

    Hi Nick...thanks for taking the time to reply to my question.
    Nick Holmes wrote:
    What you have there is a mess.
    NTSC pixels are never square.
    NTSC is 720x486, even when it is Anamorphic.
    You shouldn't be using an already letterboxed master to make an Anamorphic version. Get the master that was made before the letterboxing stage.
    When you make an Anamorphic DVD it should display as 16:9 full screen automatically on widescreen TVs.
    The same DVD will automatically letterbox on 4:3 TVs.
    Um yeah...duh. That's exactly what I was trying to explain in the preface of my question. I'm sorry if I didn't make it clear...all these things you mention are the reasons I'm putting together a list of the technical specs of the DigiBeta I need so I can have them send that instead of the stupid letterboxed version. 
    Look, I'm sending this request to some intern at their offices in England, asking for a master with which I can make an Anamorphic DVD. They already sent me this master, which as you and I both agree is an idiotic asset to use for these purposes. As such, I was hoping for advice on a more precise way of requesting the master that I need than asking for "the master that was made before the letterboxing stage." Upon reflection, perhaps I'll just do that. If you or anyone else has a suggestion about something I should add to my request that would improve the odds of them sending the tape I need, please repond. Thank you!
    BTW, It's been a long time since anyone has responded to something I've written or said as though I'm an idiot. I remember now that I don't really like it. (Moving along...)

  • What are the settings required for QM in procurement

    Hi Team,
    What are the settings required for QM in procurement. I have  set indicator for QM in procurement in QM view in material master.
    I am not clear about  following fields to be maintained in QM view.
    QM Control Key
    Certificate type
    Target QM system
    Tech. delivery terms Indicator.
    Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
    Thanks

    Hi,
    All meaning are
    QM Control Key :
    If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
    Certificate type :
    Certificate types applies to the Certificate processing in procurement  &  Certificate creation
    Target QM system :
    whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
    -  If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
    -  If you want Vendor's perticular certificate for Material then you have to define Certificate type.
    Also, you have to maintain Material, Vendor's Info record at plant level.
    Thanks,
    JM

  • How to find out what are the interfaces used for Job and Job Codes

    HI All,
    I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
    Thanks In Advance
    Sunny

    Hi,
    Here is an idea for your request.
    Basically you can create a simple query on multiprovider 0TCT_MC01.
    Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
    Choose following characters into your objects:
    InfoProvider ( 0TCTIFPROV )  - you can create a variable for choosing infoprovider before query runs.
    *Tp.[Type of BI Application Object] 0TCTBISOTYP  = filter this with 'QUERY' or whatever your need is.
    *BI Application Object 0TCTBISBOBJ,  ( this will give you the name of the queries)
    In key figures choose,  Count for BI Appl. (0TCTWTCOUNT).
    (number for query run)
    Create a condition , for top 20.
    Hope this helps.
    Derya

  • What are the data sources for 0FIGL_V10 cube Balance Sheet and Profit& Loss

    What are the data sources for 0FIGL_V10 (G/L (New): Balance Sheet and Profit and Loss) cube. and whether we can install business content regarding this.
    Please help me out.
    thanks,
    sapsdnhelp

    Hi,
    Check this:-------
    Urgent: Relevant Master Data Data Sources for FI-GL  & FI-AP
    http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
    Regards,
    Suman
    Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM

  • What are the special conversions for time in update rules?

    What are the special conversions for time in update rules?

    Hello,
    Special conversions for time in update rules are automatically conversion rules.
    Example: If the cube contains calendar month and your transfer structure contains date, the date to month is converted automatically.
    Assign points if this helps,
    Regards,
    Jorge Diogo

  • What are the classes used for bropdownListBox in BSP and purpose and how

    what are the classes used for bropdownListBox in BSP and purpose and how
    thank you,
    Regards.
    Jagrut BharatKumar Shukla

    Benje001,
    Right-click on the CWAI control on your form. Choose Properties. The first tab is the Channels tab. After you choose your device from the drop down box on the right, you can type in the Channels box which channel you want to use.
    If you want to see a CWAI control that is already configured, all of the shipping examples will have this already done.
    Also, if you have questions about any item on the CWAI (or any other NI ActiveX control) you can click the ? icon in the right corner of the properties page and then click on the item in the dialog that you need help with. This "What's this" help will describe that particular control on the dialog.
    Hope that helps!
    Regards,
    Shannon R.
    Applications Engineer
    National Instruments

  • What are the Things required for BI 7.0 Implementation project

    Hi Friends,
                      Can any one suggest me
    1.What are the Things required for BI 7.0 Implementation project?
    2.System Configurations & Hardware Components?
    3. Any additional steps...
    plz suggest me.
    Regards

    Hi lakshmi,
    http://csc-studentweb.lrc.edu/swp/Berg/articles/PM_2006_upgrade_NW2004s_Bjarne_Berg_v12.ppt#426,3,Why Upgrade u2013 end of supportu2026
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d163a7-0301-0010-d9b0-98f692ea3c60
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
    https://wiki.sdn.sap.com/wiki/x/JYk
    Check the following links.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    check the following
    http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
    business content
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
    https://websmp203.sap-ag.de/co
    http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm

Maybe you are looking for

  • Sender Mail Adapter Question

    Hello All, Iu2019m reading the blog: /people/michal.krawczyk2/blog/2005/12/18/xi-sender-mail-adapter--payloadswapbean--step-by-step to apply in my scenario. But Iu2019m having a issue. The messages in sxmb_moni are with state waiting. I do the same c

  • What are the basic requirements for an SAP MM fresher to get through an interview?

    Hello,       I completed my BE in Mechanical in 2012 and have some some experience of 2 years in mechanical field. Now i planned to switch my career into SAP MM. I am doing a classroom course on SAP MM.       So please suggest me the basic knowledge

  • I have vlc player movies on my external hard drive; can i watch these on the apple ipad?

    i have vlc player movies on my external hard drive; i normally watch them on an windows laptop; can i watch these on the apple ipad?

  • Help me drag and drop my image please

    my image is in JLbel i want to MOVE image between JLabel (JPanel too) not COPY like the chees game but i look at the chess game source in "search" it's use JLayer on JFrame but i use only JFrame can you give me sample move image between JLabel i thin

  • Is Transcend RAM any good?

    Hey, Im looking to upgrade RAM on my Mac mini core solo, and found quite alot of options! Transcend RAM came up a few times and i had never heard of them, are they any good? the link to the RAM is here: http://www.orcalogic.co.uk/asp/AppleMac_mini_1.