What are the various way to check the syntax of a BPM

Hi
In the Integreation Repository I created an BPM flow.
I want ot know the various ways we can do a syntax check for the BPM.
Regards,

hi somya ,
to check ur BPM for errors u cango to IR and open ur integration process there. in menu Itegration Process --> Check (F7) u can perform a check before creating a runtime version.
Also in T code SWDD menu path Workflow --> Check Syntax u can perform the check of IP after u create a runtime version from ID.
[reward if helpful]
regards,
latika.

Similar Messages

  • Mac Pro won't start up.  What's the best way to check the power supply?

    Hello. I'm having a severe problem with my 2007 Mac Pro. The symptoms are very easy to describe. The computer apparently shut itself off overnight, and when I press the power button to turn it on, absolutely nothing happens. No lights, no chime, no signs of any power whatsoever in the computer. I have never had major problems with the computer before. (Although I had recently noticed some minor skipping problems with streaming videos and Firefox had started hanging occasionally.)
    So far, I have checked the power cable and the power outlet. I have also reset the SMC (holding in the Power button for 5 seconds with the unit unplugged). I am unable to see any light in the diagnostic LEDs (including LED 1) when I press the DIAG_LED button on the logic board.
    While I welcome other suggestions, all I can figure is that this is either a power supply problem or a major logic board failure, but I don't know which. I have a multimeter and would like to test very directly if the power supply is the problem, because they are very expensive and obviously I do not want to order a replacement supply if it would not fix the computer. Does anyone know what the best way to test the supply directly is? What pins on what cable should I test, and what voltage should I look for?
    Also: No the computer is not under any warranty. If at all possible, I would like to fix this myself. Thanks for any help you can give.

    Well, I may have found the answer to my question as to why replacing the fuse dows not seem to be encouraged. I cut out the failed fuse (fast fuse, ceramic, 16 Amp 250V), and replaced it with another that was as close to it in spec as I could find (15 A instead of 16). Then I put the supply back in the case.
    When I tried to plug it in, I got an immediate spark, followed by an acrid smell from the power supply. Later inspection revealed that the new fuse blew, as did another component nearby (not sure what it was) where I could see blackening and the smell was concentrated. At this point, I would consider myself lucky if the power supply didn't take anything else on the computer out with it.
    Lesson learned; will try a new power supply and go from there.

  • Whats the best way to check the speed of my macbook Pro

    Hi people.
    I just wanted to get some advice on how my Mac is running, as i think it has become slower since i bought it and wondered if it is anything i have done or should be doing
    First of all, i have a MBP bought mid 2011, has thunderbolt port, its 2.3Ghz Intel i5, 4GB 1333Mhz DDR3, 320Gb HD and now running Mountain Lion.
    When i first got it i thought it was quicker than anything i have used previously, an example would be when i click to open an apple program e.g. iphoto, the icon jumped up and then seconds later it was open. Now any program i try to open, it seems to take much longer, it bounces for a while and then finally opens.
    I have not got any clutter on the laptop, i keep all my files on a network hard drive. The only thing i have is 80Gb of photos stored under iphoto and i have Windows XP running on a 40Gb partition using Bootcamp.
    I am thinking about getting rid of the XP on my mac to see if it helps, but thought i would ask here first. I need XP as it allows me to run programs which dont support Apple OS X.
    I was also wanting to know the best way to store photos, would i be able to store the photos on my network drive and have iphoto work exactly the same..?
    Help much appreciated.
    Thank you.

    Hi people.
    I just wanted to get some advice on how my Mac is running, as i think it has become slower since i bought it and wondered if it is anything i have done or should be doing
    First of all, i have a MBP bought mid 2011, has thunderbolt port, its 2.3Ghz Intel i5, 4GB 1333Mhz DDR3, 320Gb HD and now running Mountain Lion.
    When i first got it i thought it was quicker than anything i have used previously, an example would be when i click to open an apple program e.g. iphoto, the icon jumped up and then seconds later it was open. Now any program i try to open, it seems to take much longer, it bounces for a while and then finally opens.
    I have not got any clutter on the laptop, i keep all my files on a network hard drive. The only thing i have is 80Gb of photos stored under iphoto and i have Windows XP running on a 40Gb partition using Bootcamp.
    I am thinking about getting rid of the XP on my mac to see if it helps, but thought i would ask here first. I need XP as it allows me to run programs which dont support Apple OS X.
    I was also wanting to know the best way to store photos, would i be able to store the photos on my network drive and have iphoto work exactly the same..?
    Help much appreciated.
    Thank you.

  • The best way to check the differences between two lists? Or substracting

    Hi,
    I am Googling on this and find many different answers and I am not sure what the best approach is. I have two lists:
    List A: with 10000 entries (String with length 6 all of them)
    List B: with 10002 entries (String with length 6 all of them)
    List A and B are almost identical but with 2 differences. I want to find these two differences or in other words generating a third list, List C with these 2 differences.
    What is the best way to approach? To us Array, ArrayList, Vectors, Hashmap, Hashtable...
    Thank you for any hunches

    Maria1990 wrote:
    I think I found the easiest approach...
    listA = [a, b, c];
    listB = [a, b];
    listC = listA.removeAll(listB);
    ...but if it is the best approach with performance in mind.. I have no idea...It really depends on what sort of comparison you want. Lists allow duplicate elements, Sets do not; so a comparison of Sets based on the contents of your Lists would only return distinct element differences.
    My suggestion: sort both lists and do a "staircase" comparison. That is (assuming they're both in ascending order):
    1. Read through both until you find a mismatch.
    2. Read through the one containing the "lesser" element, until you find a match, or until it's exhausted.
    3. If you find a match, go back to 1.
    4. If you exhaust one list, then any remaining elements in the other are also "mismatches".
    HIH
    Winston
    PS: With this approach, you can also flag your mismatches as "A not in B" or "B not in A".
    Edited by: YoungWinston on Jul 27, 2010 4:24 AM

  • What are the various ways to take backup on solaris 10

    What are the various ways to take backup on solaris 10.
    Kindly tell in detail
    Thanks in advance

    ufsdump - used for ufs backup. you can perform full (0), incremental and differential backups.
    example1. ufsdump 0cfu /dev/rmt/0 /dev/rdsk/c0t3d0s0 - back-up root filesystem to tape device
    example2. ufsdump 5fuv /dev/rmt/1 /dev/rdsk/c0t3d0s6 - back-up filesystem on partition 6 to tape device
    tar - used to bundle set of files and directories. No hidden files will be backed-up
    example - tar cvf /dev/rmt/0 / /usr /var /home - back-up / (root), /usr, /var and /home filesystems to tape device.
    dd - convert and copy file
    example 1. dd if=/dev/rmt/0h of=/dev/rmt/1h
    example 2. tar cvf - . | compress | dd obs=1024k of=/dev/rmt/0 conv=sync
    cpio - good for restoring image from one system to the other.
    see man pages for in-depth details

  • What are the various ways i can clear my previous(page displayed) session?

    what are the various ways i can clear my previous(page displayed) session?
    or at least one effective one.
    here my requirement is when i reach to any page if i refresh or go to other page and come back it should not retain anything there.
    session should get clear after every visit to any page or same page.
    thanks
    vijendra

    hi
    u can disable back button of browser using....
    response.setHeader("pragma","no-cache");
    response.setHeader("Cache-Control","no-cache");
    response.setHeader("Cache-Control","no-store");

  • I am getting pop ups on safari and firefox lately and am worried i may have malware or something now on my computer doing this. What is the best way to check this out for sure and remove it?

    I am getting pop ups on safari and firefox lately and am worried I may have malware or something now on my computer doing this. What is the best way to check this out for sure and remove it?

    Please review the options below to determine which method is best to remove the Adware installed on your computer.
    The Easy, safe, effective method:
    http://www.adwaremedic.com/index.php
    If you are comfortable doing manual file removals use the somewhat more difficult method:
    http://support.apple.com/en-us/HT203987
    Also read the articles below to be more prepared for the next time there is an issue on your computer.
    https://discussions.apple.com/docs/DOC-7471
    https://discussions.apple.com/docs/DOC-8071
    http://www.thesafemac.com/tech-support-scam-pop-ups/

  • What is the easiest way to check for internet connection in C#?

    Hi!
    I searched a lot but I didn't get my answer. I'm looking for the easiest way to check for internet connection. Can you help me?
    Thanks a lot.

    Hi Pouya Ebrahimzadeh,
    I suggest you could connect a site to check if it can be opened.
    Public Shared Function CheckForInternetConnection() As Boolean
    Try
    Using client = New WebClient()
    Using stream = client.OpenRead("https://msdn.microsoft.com/")
    Return True
    End Using
    End Using
    Catch
    Return False
    End Try
    End Function
    If you have any other concern regarding this issue, please feel free to let me know.
    Best regards,
    Youjun Tang
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Ive tried almost EVERYTHING and i still cant track my iPod that was recently stolen. Ive called apple been all over the website and still no way of tracking it. What are some other ways!?

    Ive tried almost EVERYTHING and i still cant track my iPod that was recently stolen. Ive called apple been all over the website and still no way of tracking it. What are some other ways!?

    Only the old fashioned way, like if you lost a wallet or purse.
    - If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
    - You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
    - If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
    - Change the passwords for all accounts used on the iPod and report to police
    - There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
    - Apple will do nothing without a court order                                                        
    Reporting a lost or stolen Apple product                                               
    - iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • Hi all! What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

    What is the best way to create the correct space for baseball jersey names and numbers? along with making sure they are the right size for large printing.

    Buying more hard drive space is a very valid option, here.  Editing takes up lots of room, you should never discount the idea of adding more when you need it.
    Another possibility is exporting to MXF OP1a using the AVC-I codec.  It's not lossless, but it is Master quality.  Plus the file size is a LOT smaller, so it may suit your needs.

  • Is there's a way to check the numbers i have been sending imessage too? for example if i send a normal sms it will show up on my bill but what about imessage?

    is there's a way to check the numbers i have been sending imessage too? for example if i send a normal sms it will show up on my bill but what about imessage?

    damnn thats crap ... thanks anyway pal

  • What are the different ways in accessing the SQL server from NWDS ?

    Hi Experts,
    Can anyone suggest the different ways for accessing the SQL server from NWDS.I also want to know whether any tool is available for accessing SQL server from Webdynpro java application in Netweaver development studio.
    I am currently using JDBC driver for accessing the SQL server from Webdynpro java application in NWDS.
    Regards,
    Krishna Balaji T

    Note - that no internet backup service has been proven to be safe and effective for backing up the iPhoto library - unless you personally have backup uyp an iPhoto library and restored it sucussfuly form one it should not be recommended - a large number of people have lost their photos trying it
    LN

  • What is the best way to export the data out of BW into a flat file on the S

    Hi All,
    We are BW 7.01 (EHP 1, Service Pack Level 7).
    As part of our BW project scope for our current release, we will be developing certain reports in BW, and for certain reports, the existing legacy reporting system based out of MS Access and the old version of Business Objects Release 2 would be used, with the needed data supplied from the BW system.
    What is the best way to export the data out of BW into a flat file on the Server on regular intervals using a process chain?
    Thanks in advance,
    - Shashi

    Hello Shashi,
    some comments:
    1) An "open hub license" is required for all processes that extract data from BW to a non-SAP system (including APD). Please check with your SAP Account Executive for details.
    2) The limitation of 16 key fields is only valid when using open hub for extracting to a DB table. There's no such limitation when writing files.
    3) Open hub is the recommended solution since it's the easiest to implement, no programming is required, and you don't have to worry much about scaling with higher data volumes (APD and CRM BAPI are quite different in all of these aspects).
    For completeness, here's the most recent documentation which also lists other options:
    http://help.sap.com/saphelp_nw73/helpdata/en/0a/0212b4335542a5ae2ecf9a51fbfc96/frameset.htm
    Regards,
    Marc
    SAP Customer Solution Adoption (CSA)

  • What is the best way to share the High Res images ...

    What is the best way to share the High Res images on my Nokia Lumia 1020?  My Android friends really want to see the original ~12MB images taken with Nokia Pro Camera?
    -Paul
    Solved!
    Go to Solution.

    if you have the att device, then use your att locker.
    ANYONE can sign up for the att locker here:
    https://locker.att.net/app/#welcome
    even if you do not have ATT service, you should sign up NOW.
    There is an application that is pre-installed to allow for the 1020 to upload the full resolution files to the AT&T locker.
    AND, because they are launching the 1020, they are giving a free upgrade to the account to the 50GB box instead of the 5GB.
    they are doing this for a limited time only, I have created a couple of accounts.
    after you create your account, it will have to be verified. after you check your email and verify the box, log back in and you will see it is only a 5gb account.
    click on "my Account/upgrade" and choose the 50GB and you should see it say FREE under the cost.
    then you can upload the full res pictures and share them that way.
    otherwise, if you are within reach, try Bluetooth transfer.

  • I bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

    i bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

    How is your iPhone's display different?
    You can check the model number by  going to Settings/General/About. These are the model numbers for the various 3 GS models;
    MB715LL/A (16 GB Black), MB716LL/A (16 GB White), MB717LL/A (32 GB Black), MB718LL/A (32 GB White), MC555LL/A (8GB)

Maybe you are looking for