What are the video effects used in this video

I was just wondering if anybody could help me. I was intrigued to find out what kind of video effect is used in this video at 0:16 - 0:18 and if theres a name for this type of video and editing used throughout the video such as the continous stream of different videos etc.

Do you mean the distorted lips or the bad tv reception.
The distorted lips can be anything from Bulge to Mesh Warp to Liquefy.
The bad TV reception can be started with the Bad TV Effects Presets that comes with AE. You can modify or edit these as you like.
I know of no specific style name that goes along with any part of this video other than lazy. It looks like nobody had an idea of what they wanted to do so they just shot a bunch of stuff and threw every effect they had in their bag of tricks at the project. Turn off the sound and it's impossible to tell what it is about. I don't mean to be critical but there's not much original here that I haven't seen a zillion times going back to the Video Toaster days. (probably before you were born). It's nothing more than a bunch of quick cuts and jitter.
Load up about 100 layers, trim them do different lengths from 5 to 30 frames, Select half of them, apply Bad TV1 to that bunch, Apply Bad TV2 to the another 10 random layers. Add tint, bulge, to a few more. set a couple of position and rotate keyframes to a few more then add wiggle to those, then use the Keyframe Assistant to sequence the layers and you'll be pretty close. It should take you about 15 minutes.
If you've got a specific question about how they made this jitter or how they made time stutter ask away. If used to tell a story these techniques are all useful. If you just want to create a jarring montage then follow my suggestion in the previous paragraph then run Brainstorm a couple of times.

Similar Messages

What are the limitations regarding use of video in an iBook: length, file size, etc?

What are the limitations regarding use of video in an iBook: length, file size, etc?

Total book size is 2.0GB max. Length would be relative to size based on quality.
See:
- Optimizing performance in your iBooks Author books
- iBooks Author: Add video to your iBook

How to use Smart cut and what are the restrictions to use this

Hello,
How to use Smartcut and what are the restrictions to use this.
is it possible in version 9.
and is it safer to use it in real iproject mplementation?
Thanks in advance

Hi
read more about smartcuts here http://download.oracle.com/docs/cd/E12825_01/epm.111/bpmui_admin.pdf
read "Managing smartcuts"
Regards
alexander

What are the bad Effect of changing sap Standard Programs?

Hi all,
I want to know what are the Bad effects of changing SAP standard screen and reports.
I need a bit theoretical Explanation.
Please suggest me some good and effective matter link.
Regards

Hi sonal,
If I write the theory here ,might be its going to mess up here.mm..try this link.There are good information in changing a standard functionality.
http://software.feedfury.com/content/28535477-changing_the_sap_standard.html
2. I can tell one of like ...
To change a standard program or functionality or standard field in sap,we have to go for related user,customer scvren exit etc.
We have to find the right exit to that particular transaction and do our customized coding there.We have to be very careful,since we are going to change the standard exit.this user exit will be used in 'N' number of other screens and transaction.So when you change , that change will /may affect the other transactions also.If you corrupt that particular exit,there are chances for that transaction to go for a toss.I have experianced this personally.when I was working on particular userxit and editing,that particular transaction was not working properly for others,since i was doing from my login,everyone came to my place and started bugging me to stop working on it:)
Regards,
SanthoshSivanathan

What are the Tcodes commanly used in ALE-IDOCs?

Hi,
What are the Tcodes commanly used in ALE-IDOCs?
Regards,
Chow.

Hi,
Go through the following Tcode for ALE
ALE IDOC
Sending System(Outbound ALE Process)
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Create Model View
Tcode BD82 ? Generate partner Profiles & Create Ports
Tcode BD64 ? Distribute the Model view
Message Type MATMAS
Tcode BD10 ? Send Material Data
Tcode WE05 ? Idoc List for watching any Errors
Receiving System(Inbound ALE )
Tcode SALE ? for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 ? Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 ? Idoc List for inbound status codes
ALE IDOC Steps
Sending System(Outbound ALE Process)
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Create Model View
Tcode BD82 !V Generate partner Profiles & Create Ports
Tcode BD64 !V Distribute the Model view
This is Receiving system Settings
Receiving System(Inbound ALE )
Tcode SALE ?3 for
a) Define Logical System
b) Assign Client to Logical System
Tcode SM59-RFC Destination
Tcode BD64 !V Check for Model view whether it has distributed or not
Tcode BD82 -- Generate partner Profiles & Create Ports
Tcode BD11 Getting Material Data
Tcode WE05 !V Idoc List for inbound status codes
Message Type MATMAS
Tcode BD10 !V Send Material Data
Tcode WE05 !V Idoc List for watching any Errors
1)a Goto Tcode SALE
Click on Sending & Receiving Systems-->Select Logical Systems
Here Define Logical Systems---> Click on Execute Button
go for new entries
1) System Name : ERP000
Description : Sending System
2) System Name : ERP800
Description : Receiving System
press Enter & Save
it will ask Request
if you want new request create new Request orpress continue for transfering the objects
B) goto Tcode SALE
Select Assign Client to Logical Systems-->Execute
000--> Double click on this
Give the following Information
Client : ERP 000
City :
Logical System
Currency
Client role
Save this Data
Step 2) For RFC Creation
Goto Tcode SM59-->Select R/3 Connects
Click on Create Button
RFC Destination Name should be same as partner's logical system name and case sensitive to create the ports automatically while generating the partner profiles
give the information for required fields
RFC Destination : ERP800
Connection type: 3
Description
Target Host : ERP000
System No:000
lan : EN
Client : 800
User : Login User Name
Password:
save this & Test it & RemortLogin
3)
Goto Tcode BD64 -- click on Change mode button
click on create moduleview
short text : xxxxxxxxxxxxxx
Technical Neme : MODEL_ALV
save this & Press ok
select your just created modelview Name :'MODEL_ALV'.
goto add message type
Model Name : MODEL_ALV
sender : ERP000
Receiver : ERP800
Message type :MATMAS
save & Press Enter
4) Goto Tcode BD82
Give Model View : MODEL_ALV
Partner system : ERP800
execute this by press F8 Button
it will gives you sending system port No :A000000015(Like)
5) Goto Tcode BD64
seelct the modelview
goto >edit>modelview-->distribute
press ok & Press enter
6)goto Tcode : BD10 for Material sending
Material : mat_001
Message Type : MATMAS
Logical System : ERP800
and Execute
7)goto Tcode : BD11 for Material Receiving
Material : mat_001
Message Type : MATMAS
and Execute --> 1 request idoc created for message type Matmas
press enter
Here Master Idoc set for Messge type MATMAS-->press Enter
1 Communication Idoc generated for Message Type
this is your IDOC
Change Pointers
I know how to change the description of a material using ALE Change Pointers.
I will give the following few steps
1) Tcode BD61---> check the change pointers activated check box
save and goback.
2) Tcode BD50---> check the MATMAS check box save and comeback.
3) Tcode BD51---> goto IDOC_INPUT_MATMAS01 select the checkbox save and comeback.
4) Tcode BD52---> give message type : matmas press ok button.
select all what ever you want and delete remaining fields.
save & come back.
5) 5) go to Tcode MM02 select one material and try to change the description and save it
it will effects the target systems material desciption will also changes
6) goto Tcode SE38 give program Name is : RBDMIDOC and Execute
give Message type : MATMAS and Executte
ALE/IDOC Status Codes/Messages
01 Error --> Idoc Added
30 Error --> Idoc ready for dispatch(ALE Service)
then goto SE38 --> Execute the Program RBDMIDOC
29 Error --> ALE Service Layer
then goto SE38 --> Execute the Program RSEOUT00
03 Error --> Data Passed to Port ok
then goto SE38 --> Execute the Program RBDMOIND
12 Error --> Dispatch ok
Inbound Status Codes
50 Error --> It will go for ALE Service Layer
56 Error --> Idoc with Errors added
51 Error --> Application Document not posted
65 Error --> Error in ALE Service Layer
for 51 or 56 Errors do the following steps
goto WE19 > give the IDOC Number and Execute>
Press on Inbound function Module
for 65 Error --> goto SE38 --> Execute the Program RBDAPP01 then your getting 51 Error
Regards,
Priyanka.

What is an ageing report? What are the data sources used to develop an agin

Hello BW gurus,
I was going thru some of the BW resumes. I could not understand some of the points mentioned below. Kindly go thru them and please explain each of it.
Thank you.
TR.
     Developed AR ageing report, created invoice layout and processed invoices.
What is an ageing report? What are the data sources used to develop an aging report
     Worked on month-end and year end processes such as Balance Sheet Statements and Profit and Loss Accounts.
What data sources does one use to get Balance sheet and P&L accounts tables and fields.
     Involved in the end to end implementation of BW at Reliance Group as a team member.
What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or
a full life cycle project?
     Extensively worked on BW Statistics to optimize the performance of Info Cubes and to create Aggregates.
What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes.
What are aggregates why do you need them?
     Prepared design documents from the Business Requirement documents and identified the
relevant data targets for satisfying the customer requirements.
What are the design documents does one prepare, please give an example.
Is cube a data target?

What is an ageing report? What are the data sources used to develop an aging report
Aging refers to values in different time period ranges. Example, the customer (credit) aging report can look like this.
customer (credit) for current period, 0 to 30 days, 30 to 90 days, 90 to 120 days. This is the way aging is classified.
What data sources does one use to get Balance sheet and P&L accounts tables and fields.
For P&L information, you may use 0FI_GL_6 datasource (or 0FI_GL_10 if you use ERP 5.0 version). This datasource reads the same information used in R/3 transaction f.01 (table glt0).
What are the tasks a BW consultant normally performs when he is involved in an end to end implementation project or a full life cycle project?
Requirement gathering, blueprint creation, development etc
Refer to posts on Sap Methodology and Sap lifecyle
What do you mean when you say worked on BW statistics to optimize the performance of Info Cubes. What are aggregates why do you need them?
Please check these links
http://help.sap.com/saphelp_nw04/helpdata/en/8c/131e3b9f10b904e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f0/3c8c3bc6b84239e10000000a114084/plain.htm
What are the design documents does one prepare, please give an example.
Design document is basically a document to say how the design is to be developed for a particular solution ex: FI it says what is the data fow and what are the data targets to be used and how data shld be stored for providing the client a solution they need.
Is cube a data target?
Yes cube is a data target.
Hope this Helps
Anand Raj

What are the implications of using jquery version 1.10.2 rather than the version (1.7.1) that Adobe

What are the implications of using jquery version 1.10.2 rather than the version (1.7.1) that Adobe uses? Thanks
Bob

I am having trouble when my Edge Animate composition (banner ad) appears on a web page that uses jquery version 1.8.23. Some of the functionality of the host page no longer works. This occurs only when my composition is present & the functionality returns when another ad is displayed (either a Flash ad or a gif). It happens in Chrome Version 31.0.1650.63 m, Chrome Version 33.0.1738.0 canary & IE 11.
I had edited my Edge Animate files to use the Adobe CDN option & to point to another server (mine) so only the html file was needed to be placed in the ad rotator & on the host's server. I now have edited them again to include the Google CDN locations for version jquery 1.10.2 (http://ajax.googleapis.com/ajax/libs/jquery/1.10.2/jquery.min.js). I am waiting for the host site to try this updated html file. When I visit just this new page & the old one that pointed to 1.7.1 for that matter, it works fine.
Thank you for taking the time to read and answer my message.
Bob

What are the limitations of using labview 8.5.1 developers suite verses a real-time module in field point applications?

What are the limitations of using labview 8.5.1 developers suite verses a real-time module in field point applications? Can an exe. be loaded onto a field point controller or does the controlling program have to reside on a PC for example?

centerbolt is correct, you can't load a .exe or even run a program on the fieldPoint controller unless you have the Real Time module. However, that does not mean you can't use your FieldPoint bank without the Real Time module.
From LabVIEW for windows you can make calls to the fieldpoint IO using the fieldpoint read/write functions.
This program runs on the PC not the FieldPoint controller. If you loose network connection to the fieldpoint, your program will loose connection to the IO. For many data logging applications this type of arrangement can work just fine. However, if this is the only type of application you are ever going to run, then you may as well not buy the Real Time controller for your fieldpoint but the network controller only.
If your application requires more reliability, and/or greater determinism than can be achieved by running a program on windows, then you should use the LabVIEW Real Time module and develop a program that can run down on the FieldPoint controller independent of windows.
Message Edited by StevenA on 07-22-2008 04:14 PM
SteveA
CLD
FPGA/RT/PDA/TP/DSC
Attachments:
fp pallet.PNG ‏6 KB

Wiki or Robohelp - What are the benefits of using a wiki vs publishing projects in robohelp?

What are the benefits of using a wiki vs publishing projects in robohelp? I currently use RH9/RH9 Server and publish multiple SSL. The company is looking to stop using Robohelp and replace our online help authoring tool (RH) with a wiki. Are there any benefits of going to a wiki environment. What RH features/functions that I have today will i not have by having IT import our robohelp files into a wiki?
I know that a wiki is not an authoring tool, but someone must think it is and we'll still have all the functionality of publishing multiple SSLs, reports, etc once in the wiki environment. Any comments - is this the best route?

Hi,
There are many differences. The idea of a wiki is to allow anyone to view and/or edit the content. Depending on the wiki system, you can set access control for viewing and editing.
Wiki's typically have simple syntax (html in a wiki is a serious security risk), allow image embedding, links and attachments. You will need to learn the specific syntax (rather easy, but also very limited).
What will you lose? This depends on the features available in the wiki system as well as the available plugins. A few downsides:
- WYSIWYG editor limited, if at all.
- No snippets
- No variables
- Dropdowns (may be possible through plugins)
- Index
- Styling based on css classes (mostly supported through HTML which is a security concern)
- Only one version of your support system: multiple versions require multiple installations/configurations.
- No searching in attachments.
- No CBT (Though some wiki's allow comments in the wiki code)
- No Word/FrameMaker import.
- You have to create your own CSH calls.
On the upside:
- Most wiki systems are free, even for commercial use.
- The syntax is quite simple, allowing you to quickly write text.
- Wiki's typically offer good support for syntax highlighting.
- They are very easy to set up.
- Most wiki's have plugins to enable comments.
The greatest downside in my opinion is that you always have the latest version of all files. Whenever you update a page, everyone immediately has the latest version. And if you want to create help for a feature that isn't released yet, you will have to use access control to make sure not everyone sees the (unfinished) help for the unreleased feature. With RoboHelp you have a single source that creates a one way output.
We use both RoboHelp and wiki's: RoboHelp for customer help and wiki internally to share knowledge. And sharing knowledge is what wiki's are designed for.
Greet,
Willam

What are the advantage of using Oracle Database when compare to SQL SERVER

Hi all
Please tell anyone about
what are the advantage of using Oracle Database when compare to SQL SERVER
Thanks in advance
Balamurugan S

user12842738 wrote:
Hi,
There are various differences between the two.
1. SQL Server is only Windows, but Oracle runs on almost all Platforms.
2. You can have multiple databases in SQL Server, but Oracle provides you only one database per instance.Given that the very term 'database' has s different meaning in the two products, this "difference" is absolutely meaningless.
3. SQL Server provides T-SQL for writing programs, whereas Oracle provides PL/SQLWhich means what? Both products have a procedural programming language. They named them differently, and the languages are not interchangeable. Means nothing in comparing the features/strengths/weaknesses/suitability to purpose.
4. Backup types in both are the same. (Except Oracle provides an additional backup called Logical Backup.)You make that sound like "Logical Backup" is something more than it is. It is nothing more than an export of the data and metadata. Many experts don't even consider it a backup. I'm sure SQL Server provides the same functionality though they probably call it by some other name.
5. Both provide High Availability.Well, I guess they both have a suite of features they refer to as "High Availability". But what does that really mean? The devil is in the details. Remember, the two products don't even agree on what constitutes a "database".
6. Both come in various distributions.???
>
If you are going for an Implementation, you can try SQL Server Express Edition and Oracle XE which are free to use.
Then you can choose whichever is comfortable for your needs.
Thanks.

What is workflow ? What are the advantages of using workflow? What are the

what is workflow ? What are the advantages of using workflow? What are the steps for building a workflow ?

Hi Leela,
Your question is very straight question.
Better u can follow these links.
http://www.esnips.com/doc/90b7763b-f9d9-4861-a273-04674b9fe3f2/Workflow
http://www.esnips.com/doc/991843e0-8686-4949-94b9-f45d90081b22/workflow
And i'll give some theory answer for ur questions
i.e.,SAP Business Workflow can be used to define business processes that are not yet mapped in the R/3 System. These may be simple release or approval procedures, or more complex business processes such as creating a material master and the associated coordination of the departments involved. SAP Business Workflow is particularly suitable for situations in which work processes have to be run through repeatedly, or situations in which the business process requires the involvement of a large number of agents in a specific sequence.
You can also use SAP Business Workflow to respond to errors and exceptions in other, existing business processes. You can start a workflow when predefined events occur, for example an event can be triggered if particular errors are found during an automatic check.
SAP provides several workflows that map predefined business processes. These workflows do not require much implementation. For an overview of these SAP workflows, refer to Workflow Scenarios in Applications.
Integration
SAP Business Workflow uses the existing transactions and functions of the R/3 System and does not change the functions. You can combine the existing functions of the R/3 System to form new business processes with SAP Business Workflow. The workflow system takes over control of the business processes. If you are already using SAP Organizational Management, you can use the organizational structure created there to have the relevant agents carry out the individual activities. It is possible to have an activity carried out by a position. This ensures that the respective occupiers of the position can carry out the individual activities during execution of the workflow. This means that personnel changes in your organization are taken into account immediately in the execution of a workflow.
Features
SAP Business Workflow provides a number of tools for defining and analyzing workflows as well as for monitoring operation.
The Workflow Builder is for displaying and making changes to workflows. You can make small extensions directly to the original workflows supplied by SAP, such as carrying out your own agent assignments or changing deadline monitoring.
There are several Workflow Wizards to support you in the definition of workflows, with which you can create specific parts of a workflow. The Workflow Wizard Explorer gives you an overview of the existing Workflow Wizards.
In order to make the functions of the R/3 Systems available to a workflow, you use business objects, which you can define and analyze in the Business Object Builder. These business objects are made available to the workflow in reusable tasks. The Business Wizard Explorer gives you an overview of all existing tasks.
The end user receives information about the activities they are to carry out in their Business Workplace. This provides them with a central overview of all the activities that they are authorized to carry out. They can commence the activities from here.
Several tools are available to the workflow system administrator, with which they can control and analyze the current workflows. The workflow system administrator is notified of problems automatically by the system.
Workflow tutorials with step-by-step and with screenshots are available at http://www.****************/Tutorials/Workflow/Workflow.htm
This has a step by step procedure :
http://fuller.mit.edu/workflow/debugging.pdf
www.erpgenie.com/sap/workflow/debugging.htm
http://www.erpgenie.com/workflow/debugging.htm?2b5de440
Rewards if it is useful.

What are the advantages of using an internal table with workarea

Hi,
can anyone tell me
What are the advantages of using an internal table with workarea
over an internal table with header line?
thnks in adv
regards
nagi

HI,
Internal tables are a standard data type object which exists only during the runtime of the program. They are used to perform table calculations on subsets of database tables and for re-organising the contents of database tables according to users need.
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb35de358411d1829f0000e829fbfe/content.htm
<b>Difference between Work Area and Header Line</b>
While adding or retrieving records to / from internal table we have to keep the record temporarily.
The area where this record is kept is called as work area for the internal table. The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
e.g.
data: begin of itab occurs 10,
ab type c,
cd type i,
end of itab. " this table will have the header line.
data: wa_itab like itab. " explicit work area for itab
data: itab1 like itab occurs 10. " table is without header line.
The header line is a field string with the same structure as a row of the body, but it can only hold a single row.
It is a buffer used to hold each record before it is added or each record as it is retrieved from the internal table. It is the default work area for the internal table
1) The difference between
whih header line and with out heater line of internal table.
ex:-
a) Data : itab like mara occurs 0 with header line.
b) Data: itab like mara occurs 0.
-While adding or retrieving records to / from internal table we have to keep the record temporarily.
-The area where this record is kept is called as work area for the internal table.
-The area must have the same structure as that of internal table. An internal table consists of a body and an optional header line.
-Header line is a implicit work area for the internal table. It depends on how the internal table is declared that the itab will have the header line or not.
a) Data : itab like mara occurs 0 with header line.
table is with header line
b) Data: itab like mara occurs 0.
table is without header line
2)work area / field string and internal table
which one is prefarable for good performance any why ?
-The header line is a field string with the same structure as a row of the body, but it can only hold a single row , whereas internal table can have more than one record.
In short u can define a workarea of an internal table which means that area must have the same structure as that of internal table and can have one record only.
Example code:
data: begin of itab occurs 10,
ab type c,
cd type i,
end of itab. " this table will have the header line.
data: wa_itab like itab. " explicit work area for itab
data: itab1 like itab occurs 10. " table is without header line.
Regards,
Padmam.

What are the advantages of using CACHE and NOCACHE Hint

What are the advantages of using CACHE and NOCACHE Hint & difference of them.I saw one of oracle.sql script have CACHE & oracle rac script include NOCACHE .Why is that

924250 wrote:
In a SOA product include db scripts,when we install the product we want to execute the db script to create sequence both oracle RAC & Oracle db
Oracle DB
CREATE SEQUENCE REG_LOG_SEQUENCE START WITH 1 INCREMENT BY 1 NOCACHE
Oracle RAC DB
CREATE SEQUENCE REG_LOG_SEQUENCE START WITH 1 INCREMENT BY 1 CACHE 20 ORDERas sb mentioned, this has nothing to do with oracle hints.
you'll want to search the documentation about sequences.

What are the advantages of using LabVIEW projects in TestStand, as apposed to just a path to a vi

What are the advantages of using LabVIEW projects in TestStand, as apposed to just a path to a vi ?
I am modifying an existing workspace for a new product, and it seems like more work to add the vi's into a LabVIEW project
does it gain anything in the long run

Hi Rusty,
I wanted to quickly clarify on the integration between TestStand and LabVIEW Projects.
As Jeff mentioned, some of the big benefits of using LabVIEW Projects is to organize code and to namespace them.
For instance if you had a project called "Power Supply" that housed all your power supply code and had a VI in that called "Initialize", and another project called "Temperature Chamber" that also had a VI called "Initialize", both these VIs are namespaced by the project, so there is no longer confusion about which "Initialize" VI is being used.
Now from a TestStand point of view, in prior version of TestStand, we lost some of this benefit because TestStand did not know about TestStand projects and called VIs simply as un-namespaced VIs. However, in TestStand 2010 (released last year, free eval available at ni.com/teststand), we added the ability to (optionally) call VIs within the context of their projects. This means that:
VIs are now namespaced by their project, even when called from TestStand
VIs can use project specific constructs like NI-DAQmx tasks and conditional compilation settings
Note: When creating deployments, the VIs maintain their projects and namespacing, so this benefit holds true for deployments as well.
Additionally, someone had mentioned looking into using lvlibs to namespace your VIs for deployment. Two comments:
With TestStand 2010, this is no longer neccessary since the project itself namespaces the VIs
You might also want to look into LabVIEW Packed Project Libraries, which combined several VIs into a single file. Think of it as a DLL specific to LabVIEW that is as easy to call as normal LabVIEW VIs. TestStand 2010 can call VIs that are exposed by PPLs. In addition, the deployment utility can automatically pack your VIs into PPLs for deployment.
Hope this is helpful!
Jervin Justin
NI TestStand Product Manager

What are the function modules used in CRM_ORDER_STATUS

Hi,
what are the function modules used in CRM_ORDER_STATUS(BADI) IN THIS METHOD AFTER_CHANGE...

Hi,
http://scn.sap.com/thread/3202739
AFTER_CHANGE
ABAP ABAP Code
Follow-Up Action After Status Change
BEFORE_CHANGE
ABAP ABAP Code
Checks for Status Changeability
Sample code to set date on status change ------
INCLUDE crm_direct.
   DATA : ls_status       TYPE crmt_status_wrk.
   DATA : lv_process_type TYPE crmt_process_type.
   DATA : lit_appointment TYPE crmt_appointment_wrkt.
   DATA : wa_appointment TYPE crmt_appointment_wrk.
   DATA : ls_appoint      TYPE crmt_appointment_com.
   DATA : lt_appoint      TYPE crmt_appointment_comt.
   DATA : ls_input_field TYPE crmt_input_field.
   DATA : lt_input_field TYPE crmt_input_field_tab.
   DATA : ls_fieldnames   TYPE crmt_input_field_names.
   DATA : lt_fieldnames   TYPE crmt_input_field_names_tab.
   DATA : lt_exception    TYPE crmt_exception_t.
   DATA : lv_timestamp    TYPE sc_tstfro.
   DATA : lt_header_guid TYPE crmt_object_guid_tab.
   DATA : lt_req_objects TYPE crmt_object_name_tab.
   ls_status = is_status_wrk.
*Get process type
   CALL FUNCTION 'CRM_INTLAY_GET_PROCESS_TYPE'
     EXPORTING
       iv_orderadm_h_guid = ls_status-guid
     IMPORTING
       ev_process_type    = lv_process_type.
* Check process type
   IF lv_process_type = 'ZZZ'.
     INSERT ls_status-guid INTO TABLE lt_header_guid.
     INSERT gc_object_name-appointment INTO TABLE lt_req_objects.
**Get appoinment data
     CALL FUNCTION 'CRM_ORDER_READ'
       EXPORTING
         it_header_guid            = lt_header_guid
         iv_mode                     = gc_mode-display
         it_requested_objects   = lt_req_objects
       IMPORTING
         et_appointment       = lit_appointment
       EXCEPTIONS
         document_not_found   = 1
         error_occurred       = 2
         document_locked      = 3
         no_change_authority = 4
         no_display_authority = 5
         no_change_allowed    = 6
         OTHERS               = 7.
     IF sy-subrc NE 0.
       EXIT.
     ENDIF.
*read item level data
     READ TABLE lit_appointment INTO wa_appointment WITH KEY ref_kind = 'B'.
     IF sy-subrc = 0.
*      *Time-stamp set to as per current date and time.
       CONVERT DATE sy-datum TIME sy-uzeit INTO TIME STAMP lv_timestamp
         TIME ZONE sy-zonlo.
*Fill appoinment structure
       ls_appoint-ref_guid = wa_appointment-ref_guid."appoinment gid
       ls_appoint-ref_kind = 'B'."Item
       ls_appoint-ref_handle = '0000000000'.
       ls_appoint-appt_type = 'ZSERV_CLOSE'."c_appt_type .
       ls_appoint-timestamp_from = lv_timestamp.
       ls_appoint-timezone_from   = 'GMTUK'."time zone
       ls_appoint-mode = ''.
       ls_appoint-rule_name   = 'TODAY'.
       INSERT ls_appoint INTO TABLE lt_appoint.
       ls_input_field-ref_guid = wa_appointment-ref_guid.
       ls_input_field-ref_kind = 'B'.
       ls_input_field-objectname = 'APPOINTMENT'.
       ls_input_field-logical_key = 'ZSTATUS_NEW'.
*Fill input fields
       ls_fieldnames-fieldname = 'TIMESTAMP_FROM'.
       INSERT ls_fieldnames INTO TABLE ls_input_field-field_names.
       INSERT ls_input_field INTO TABLE lt_input_field.
       CLEAR lt_fieldnames[].CLEAR ls_fieldnames. CLEAR ls_input_field.
*To update date
       CALL FUNCTION 'CRM_APPT_MAINTAIN_MULTI_OW'
         EXPORTING
           iv_ref_guid        = wa_appointment-ref_guid
           iv_ref_kind        = 'B'
           it_appointment_com = lt_appoint
         CHANGING
           ct_input_fields    = lt_input_field
         EXCEPTIONS
           OTHERS             = 1.
     ENDIF.
   ENDIF.
Standard BADI Order_Save will take care to save into database.
Regards,
Sumeet

What are the video effects used in this video

Similar Messages

Maybe you are looking for