What are the voltage requirements for the charger?

What is the range of voltages that you can plug the iPad 2 charger into?

Thank you. I can't read the light colored font on the ac plug module. Thanks again!

Similar Messages

Does the sprint unlocked iPhone works in Pakistan and what are the charges etc.

Does the sprint unlocked iPhone works in Pakistan and what are the charges etc.

Verizon iPhone 4S SIM UNLOCK Tutorial
SGMD1 Oct 19, 2011 9:40 PM
Currently Being Moderated
Verizon has confirmed (here and here) they WILL unlock the SIM on the iPhone 4S, allowing for use of local SIM cards while traveling abroad (no word yet on whether this will allow for use on AT&T and T-Mobile.) This is different than the jailbreak unlocking method; SIM unlocking through Verizon is permanent and will not affect your warranty in any way.
1. Meet the following requirements:
* Must be a Verizon Wireless customer.
* The iPhone 4S being unlocked must be active on a Verizon Wireless line of service.
* The line of service must be active at least 60 days.
* The line of service must be in good standing for the past 60 days.
* Only one SIM Unlock per line every 10 months.
If you don't meet one or more of the above requirements, call anyway. You may still get lucky.
2. Insert a foreign SIM into the SIM card slot on the side of your phone (only required to confirm that the unlock is successful.)
3. Call 1-800-711-8300 (Verizon Global Support) and ask the representative for a SIM unlock. Occassionally a representative may not know exactly what you are referring to; make sure you are not transferred to a different department. You are in the right place. Explain that they should have a walkthrough on how to do this, and that it allows for the use of local, non-Verizon SIM cards while traveling abroad.
4. Get confirmation from the rep that the unlock has been applied to your account, then check your phone to make sure it recognizes your SIM and can connect (if successful it will roam on AT&T, assuming you are calling from the USA.) You will NOT see an unlock confirmation in iTunes as that is for a factory-applied unlock only.
5. Enjoy your new unlocked iPhone 4S!
****ALSO I JUST SPOKE WITH NICHOLE (VZN GLOBAL SUPPORT) REGARDING IF THE IPHONE 4S HAS TO BE ACTIVE AFTER SIM UNLOCK AND THE ANSWER IS: NO!

What are the charges, and who pays if I send a text overseas?

What are the charges, and who pays if I send a text overseas?

You pay as part of your cellular/telephone bill unless you use Wi-Fi which is free.

What are the charges if you overrun the monthly data charges on a 2Gb contract for Ipad Air2

I overran my data allocation by 03 Gb and was told I have now have an additional 1 Gb at $10. However, It also said to avoid "additional" charges I could retro my acct and add more Gb, but the price would be the same @ $10 per Gb.....what's the point? I wonder if there is additional charges not mentioned?? Considering Verizon is very good at charging for everything I really, really wonder.

LenaA, First thing, there was/is no "correct answer" tab under your response"!! Not surprised, having had some really bad experiences with Verizon, would expect that. The website is NOT user friendly. So, sorry I can't help you there.
You did NOT answer the question anyway. It was the same thing that is said in the message I got when I overran my allocation. I know about the $10 per Gigabyte charge and that I can upgrade my plan, but the question is; Are there any other "fees, penalties, etc" that Verizon seems to be able to dream up and always nearly impossible to get corrected if incorrect.
QUESTION: Is the $10 per Gigabyte charge the ONLY charge for overrunning the monthly allocation. My plan is 2Gb monthly @ $30.00 for data only (Ipad Air 2 Tablet only)
Thank You in advance for your correct answer,
JS

What are the charges for collecting payments through Formcentral or/and Paypal?

Is there a fixed fee? or a percentage of the total number of transactions?

We don't charge any extra fee (just need to pay for FormsCentral service).
Here is a page explaining PayPal fees:
https://www.paypal.com/webapps/mpp/paypal-fees

What are theSNP Settings required for Forecast Consumption with Sales Order

Hello APO Folks,
I have one SNP scenario: (We don't have GATP)
Forecast for Finsihed Product - "PNG_Fert" in Location "1000".
I have forecast quantity of 500, now our requirement is - when SNP heuristic run will take place (without any sales order quantity) then there should not be any planned orders creation.
Planned order creation should happen Only if any one places sales order from ECC , which comes to APO then against that sales order forecast quantity should consume and should create the planned orders equal to the nos. of sales order quantity.
So if I have forecast of 500 qtys and sales order of 90 qtys then heuristic run should yield/create the planned order of 90 qtys and there should be 500-90 = 410 forecast quantities remaning.
Please let me know which strategy will be used and other setting in ECC and APO for SNP. I
The setting with strategy 50 in ECC and 30 in APO worked properly with PPDS - RRP3 view but from interactive planning /sapapo/sdp94 it is not working, so there will be different setting for SNP.
Thanks in Advance,
Regards,
Vishal
Edited by: Vishal24a on Oct 13, 2011 9:15 AM

Vishal
Can you please explain what issue you are facing when you load the product in planning book. First thing is do you see 410 against forecast and 90 against sales order key figure ? If yes then it means the forecast is getting consumed properly by SO.
As far as your other requirement goes (planned order should only be created for sale order quantity) you have to change your total demand macro calclation logic. Your total demand key figure should show 90 instead of 500 - so just include sales order in your total demand calculation (stock balance macro) and run heuristic. Your requirement will be satisfied
Thanks
Aparna

MSS 60.1,What are backend roles required for Manager in Backend

Dear all,
I am configuring MSS 60.1.0 with R/3 4.70 and Portal 7.0. Portal user is connected to a PERNR in backend, this PERNR is a chief for a particular org unit. Can some body please suggest me what R/3 roles* I need to assign to PERNR in backend so that this PERNR has authorizations to execute iviews in MSS?
For example Manager Generic needs to be assigned to PERNR?
Thanks and warm regards,
Aditya.

HI
you will have to create manager as portal role and assigned to them necessary worksets containing necessary worksets look into the PCD in migrated content and line *?? folder you will have necessary ESS and Mss packages. and all configs is related to iviews system properties and transactions and applications you need to do it .please do not forget to give points
with regards
subrato kundu

What are network settings required for starting Web Dynpro for ABAP

hi,
I am learning Web Dynpro ABAP from SDN e-tutorial.
While creating view, the layout is displaying following error message
"Network Access Message: The website cannot be found . The IP address for the website you requested could not be found. "
Please guide about network settings needed in order to work in webdynpro ABAP.
I am working on SAP system's
Component version SAP ECC 6.0
Regards,
Tanaya
Edited by: Tanaya A on Oct 8, 2008 12:53 PM

Hi,
I have made entry in Microsoft Window's drivers>etc> host, but still following error message is coming "The IP address for the website you requested could not be found."
Technical Information (for support personnel)
Error Code 11001: Host not found
Background: This error indicates that the gateway could not find the IP address of the website you are trying to access. This is usually due to a DNS-related error.
Date: 10/10/2008 12:07:26 PM
Server: SURFCONTROL.odc.infotech.com
Source: DNS error
I think that i also need to make configuration settings in SAP.
Please guide me further.
Regards,
Tanaya
Edited by: Tanaya A on Oct 13, 2008 11:37 AM

HT4949 what are the system requirements for mac os x 10.6 server?

what are the system requirements for mac os x 10.6 server?

While not 'intended', it is indeed possible on a portable. Exigent circumstances required me to re-role an aging MacBook Pro 2.16 Intel Core Duo to act as a server on a temporary basis.
It boots just fine from an external drive running Server 10.6.8. I also believe that installation (while not recommended) is not actually blocked.
Tip for the top: just be sure to pull the battery out of the laptop (assuming that's possible) to avoid turning your battery into a grossly distended, non-functional brick... they were not designed to be left on charge permanently!

What are the settings required for QM in procurement

Hi Team,
What are the settings required for QM in procurement. I have set indicator for QM in procurement in QM view in material master.
I am not clear about following fields to be maintained in QM view.
QM Control Key
Certificate type
Target QM system
Tech. delivery terms Indicator.
Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
Thanks

Hi,
All meaning are
QM Control Key :
If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
Certificate type :
Certificate types applies to the Certificate processing in procurement & Certificate creation
Target QM system :
whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
- If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
- If you want Vendor's perticular certificate for Material then you have to define Certificate type.
Also, you have to maintain Material, Vendor's Info record at plant level.
Thanks,
JM

What are the "Add to Loop Library" requirements for creating automatically conforming loops?

I am trying to create my own loops that conform to the tempo and key of a song. I have made several loops in this way by selecting a region that is exactly 4 bars, for example, and then selecting "Add to Loop Library". If the sample is cut correctly, the "Type:" field is enabled which allows you to make it a Loop and therefore have it automatically conform to the song tempo.
In the past I have made loops that were very long, up to 128 beats, for the purpose of making mashups using instrumental tracks that I want to conform to the song. I now can't seem to create a large loop but I am not sure why. I know it is possible, but I don't know the steps I took to get there.
What are the exact requirements that allow a loop to be added to the loop library while also conforming to song key and tempo?

In the past I have made loops that were very long, up to 128 beats
The longest loop I managed to save as "Loop" had 55 measures (220 beats, 203 bpm). Longer loops could only be saved as "One shot". And the loop had to be cut at the end, not simply be trimmed by dragging the end of the region. The tempo matters; for a slow song the loop can only have fewer measures.

What are the minimum system requirements for GB 4?

What are the minimum system requirements for GB 4? I did search this forum but wasn't able to find a direct answer.
I'm running version 3.0.4 successfully on a lowly G4 733 but I suspect this is as far as I can go.
I'm updating to iDvd'08 and was also wondering if I can safely update to GB4 or not (from GB 3.0.7) on a G4 733 mhz Digital Audio. Any help would be sincerely appreciated. My guess is that I cannot but I'd like to confirm prior to attempting any further updates in GB.

I try my best to play it safely; always. And you were right, everything worked on the ext. FW HD flawlessly ...... truly amazing software!
(I did happen to check the activity Monitor w/in Utilities and it showed GB4 using about 60-67% of the CPU on a G4 733 ..... I'm assuming this is normal).
Click Here
Not sure if there's a correct order to opening these apps as there has been in former versions of iLife ..... however, this (as shown above) is the order in which I opened all apps, and all worked well.

What are the real minimum requirements for Mountain Lion?

What are the real minimum requirements for Mountain Lion. Currently running Snow Leopard. I have a late 2006 Model: iMac6,1. Specs: 2.33 GHz Core 2 Duo, 3 GB 667 MHz DDR2, and the optional nVidia GeForce 7600GT c/w 256MB GDDR2. The advertisement is stating a 2007 model as the minumum, however the fastest 2006 Gen Plastic iMac should be faster then the slowest 2007 Gen Aluminum iMac7,1?

From a previous posting from some else, I saw it was the 32bit versus 64bit video card driver being the issue. I was wondering if the optional video card I have installed also was limited to the 32bit issue. 64bit drivers exist for the 7600 GT GPU.

What are the Client machine requirements for running Forms 6i?

What are the minimum/ideal hardware requirements of the client machines which run forms 6i in separate frames.
The reason for asking this is that the users have multiple sessions of separate Forms frames. When they do a lot of activity/transactions, and try to do a windows Print Screen on a MSWord file, nothing seems to print on the Word document. If they save the document and reboot the computer and open the same word document again then the screen print shows up. I am thinking it is because the separate frames take up lot of RAM. Typical configurations of our m/c are PII 400's with 64MB RAM.
Thanks in advance.

Hi Lionel,
As a general rule of thumb, the ATI Rage 128 Pro will not support a 20" LCD. That being said, there are reports of it doing just that (possibly the edition that went into the cube).
I'm not that familiar with the ins and outs of the Cube, so I can't give you authoritative information on it.
A good place to start looking for answers is:
http://cubeowner.com/kbase_2/
Cheers!
Karl

What are the video card requirements for running a 23" cinema display

What are the video card requirements for running a 22" cinema display(clear acrylic case) w/ a PC? My motherbaord is AGP. Thanks to anyone who can help.
Intel P4 3.0ghz Windows XP

Hi Lionel,
As a general rule of thumb, the ATI Rage 128 Pro will not support a 20" LCD. That being said, there are reports of it doing just that (possibly the edition that went into the cube).
I'm not that familiar with the ins and outs of the Cube, so I can't give you authoritative information on it.
A good place to start looking for answers is:
http://cubeowner.com/kbase_2/
Cheers!
Karl

What are the Things required for BI 7.0 Implementation project

Hi Friends,
Can any one suggest me
1.What are the Things required for BI 7.0 Implementation project?
2.System Configurations & Hardware Components?
3. Any additional steps...
plz suggest me.
Regards

Hi lakshmi,
http://csc-studentweb.lrc.edu/swp/Berg/articles/PM_2006_upgrade_NW2004s_Bjarne_Berg_v12.ppt#426,3,Why Upgrade u2013 end of supportu2026
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d163a7-0301-0010-d9b0-98f692ea3c60
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
https://wiki.sdn.sap.com/wiki/x/JYk
Check the following links.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
check the following
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm

What are the voltage requirements for the charger?

Similar Messages

Maybe you are looking for