What are these Key Figures / Attributes

What are these Key Figures / Attribute? Could some one explain it?
$$PERIODIDCU$$
$$PERIODIDFR$$
$$PERIODIDTO$$
For example, one of it is used in SAP2 model, for Key Figure DEMANDPLANNINGQTY.
It has a calculation of IF("PERIODID" >= "$$PERIODIDCU$$", IF(ISNULL("DEMANDPLANNINGQTY@PERPRODCUST"),"MKTGPROMOTIONFCSTQTY@PERPRODCUST","DEMANDPLANNINGQTY@PERPRODCUST"),"ACTUALSQTY@PERPRODCUST")
Thank you.

$$PERIODIDCU$$ is a call to look up what the current period is based on the system date plus your current period offset configuration.
So the above formula says if the period ID that you are reporting on is greater than equal to the current period in the system (taking into consideration any offsets you may have configured), then do the subsequent logic.
I haven't seen the "FR" and "TO" syntax for period id, but I can only assume they are related to some sort of "from" and "to" range for period id.

Similar Messages

What are these keys for? + SIM card slot?

Hello,
I just bought a T410i and am wondering what the keys next to the arrow buttons are? They look like "Files".
Also has anyone used the SIM card slot under the battery?
Will it read cell phone SIM cards?
Thanks,
Xinerama

Hi and welcome to the forum Xinerama!
The SIM will work if you've WWAN card and data plan from your carrier.
Hope this helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Key Figure Attribute not displaying in Query Designer

Hello Experts,
I have an InfoObject which has Key Figures as attributes. When creating a query I <b>once</b> was able to see these Key Figure attributes in the Query Designer. Howerver, recently I am not able to see them anymore in our DEV environment.
In our QA and PROD environment I am to see these Key Figures attribues in Query Designer. Is there a setting that I am overlooking? We are currently on BW 3.5 with SP 19.
Please help!
Thanks in advance,
BQ

Hi Jaya,
Thanks for the quick response. But how to I check the authorization for 1KYFNM and what am I looking for?
Thanks,
BQ

Key figure Attributes not working

Hi ALL,
We have an isuue with one of our Planning book. Key figures which are supposed to be open for editing are showing as output only and key figures which are for output only are showing as open for editing.
I went to design mode to tried to change in manually , if I chane one row attribute all rows are getting changed.
I found a macro which assigns Key figure attributes which I tried to activate but still not working. We are using SAP SCM 4.1 Version.
Can any advice on this?
Sivarama

Thanks Problem is now solved. Looks like some has made changes in the design and there are macros which are working and as you said they might be conflicting. I changed the design which was working weired yesterday when I tried to cande one row attribute and all rows are getting applied, this worked fine today. And I deactivated the macro which is working on some row attributes and activated again.
I am not very clear what went right but working.
Sivarama

What are the key steps & order to follow: changes in my flat file structure

HI,
I have a Cube which sits on ODS.
In the ODS, the are 6 characterisics: Char1, Char2,...., char6; and 3 key figures: kf1, kf2, and kf3.
The ODS is loaded through a flat file.
Through an update rule and startup routine, the ODS updates the cube.
Now, I have a new requirement to add 2 new characteristics (Cha10, char20) and one 2 key figures (KF55, KF66)).i.e. the flat file will now be coming in with these new fields.
I have an idea but this this is the first time I really have to implement, I need to be sure.
What are the key steps that I need to go through and in what order?
Thanks

What version are you running ?
Will you need to load history data as for these new fields or is it just going forward ?
Is it all one to one mapping for the new fields ?
1. Make sure you know to what dimensions you need to add the new chars ? New dimension for these two ?
2. New chars to be made keyfields ?
3. Update Type for keyfigures Overwrite or Additive ?
Enhance the Cube, DSO, change TRFN/TR/UR..

Populate key figure attributes values for material & location in inventory

Hi all,
We have a Inventory Infocube. the dimensions of the inventory infocube contains material, location and material-location and also the time dimension with calday, week and month. The different key figures in the infocube are Unrestricted Stock Balances, Unrestricted Stock Receipts, Unrestricted Stock Issues, QI Stock Balances, QI Stock Issues, QI Stock Reciepts, Blocked Stock Balances, Blocked Stock Receipts, Blocked Stock Issues. The following is the definition for master data objects
Material Master - ATTRIBUTES :- Business Unit, Manufacturing Plant, Base to Case Conversion Factor(key figure attribute)
Location Master - ATTRIBUTES:- City, State, Country, Location Type
Material Location master - ATTRIBUTES:- Material, Location, MRP Controller, Source Location, Standard Cost(key figure attribute)
We have a report with material, location, calender day and with all the stock balances keyfigures. also in the report we have the key figure attributes of material master and material location (like standard cost and base to case conversion). We have defined a formula variable on these attribute key figures with replacement path.
The problem is none of the records are getting populated with the standard cost and base to case conversion.
We are NOT doing any conversion at the report level.
Any help is greatly appreciated.
Regards
Vijay

There could be few possibility:
1. The variable you are inputting for standard cost and base to case conversion may not have any values in the master data.
2. See the master data table for Material and location. Note down those materails and location for which there are values for standard cost and base to case conversion. Now, run the reports for these materials
and location.
Btw, have made standard cost and base to case conversion as nav attributes. Plz make them nav attributes and see.
Thanks...
Shambhu

What are the key points to beconsider while upgrading from 4.7 to ECC 6.0

hai
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
please provide sufficient material
points will be rewarded
regards
v.sridhar

Hi Sridhar,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Please also Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0
Please Do Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

What are these called?

Hi,
I am trying to figure out what this element is? Since I dont know what its actually called I have to provide a picture for my example.
What are these elements called? I have pointed to them in my image with the red arrows. Im pretty sure the horizontal ones are a "horizontal rule". But what about the vertical ones? And how does one implement them in a site? http://i52.photobucket.com/albums/g29/FartyMcFly/Example.jpg
Thanks for any answers in advance and I apologize if its something stupidly simple.
Thanks

How do I set the length of the border lines.
I'm afraid there is no support for that in current CSS2 standards.
You will be able to do it with CSS3 border-images. But not for a few more years.
http://www.css3.info/preview/border-image/
In the meantime, you could put your border on a neighboring division -- see example below:
http://alt-web.com/TEMPLATES/CSS-Basic-2-column-layout.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Using Key figure attribute of a characteristic in a query

Hi All,
I have the following scenario. I have defined a key figure attribute for a characteristic Infoobject. I have included this characteristic infoobject in an Infocube. I now want to use the key figure attribute as a regular key figure when I create a report based on the Infocube. Is it possible and if so how is it possible?
Thanks
Sundar

Hi Saundar,
   There's another way.Set the characteristic with key figure attributes as a data target under your info area. Create a MultiProvider and include your Cube and this characteristic. Here you can set the key figure as your MultiProvider key figure.
   Don't forget to take care of the identification of MultiProvider.
   Hope this helps.
Regards,
Aaron

What is Virtual Key Figure ?

Hello,
I would like to know about Virtual Key Figure. What is Virtual Key Figure ? How to we created ? what is use of Virtual Key Figure?
Thank you
Anup G shah

Hi,
As every one mentioned that Virtual key figure are those KF's whose values are filled at run time.
You can write customer exits to fill values of those Kf's in SAP Enhancement RSR00002.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5#search=%22SAP%20Customer%20Exit%20virtual%20key%20figure%22
http://www.bwexpertonline.com/downloads/Nissen.doc
http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/ef1f43daac9a448f0150a02e3a7aba/content.htm
Please rewad if it helps.

What are these startup items and are they harmfull

Hello
I Have a M55-S325. I have noticed some items on my startup list in system Configuration Utility
TCtrlIOhook.exe
TPSMain.exe
Ltmoh.exe
AGSMMSG.exe
Apoint.exe
TFncKy.exe
So My Question is What are these and are they harmfull
if so how do i remove them.
PLEASE HELP

Hi David,
The items you have listed are genuine items use by your operating system although they may be stopped if you wish without doing any real harm. It will largely depend on whether you want to use any of the functions in which they are involved.
For example, TCtrllOhook.exe and TPSMain.exe are associated with the Toshiba power management utility.
Ltmoh.exe and AGRSMMSG.exe relate to you installed modem.
Apoint.exe is associated with you pointing device (Touchpad or whatever).
TFncKY.exe is related to the Toshiba function keys feature.
Obviously, if you are not using your internal modem then the modem related items can be stopped without any ill effects, similarly the Toshiba Function keys.
regards,

F14, F15, F16 -- why are these keys on my Mac Keyboard ?

*** !!
Why are these keys added to my Macintosh Keyboard [circa September 2006] if the **** operating system won't allow us to use them ?
What the **** Apple ??

My 5+ year old keyboard has the F13 F14 F15 keys sitting all by their lonesome above the help, home, page up block of keys, and I set them to do the three Expose functions, so the system will use them (at least if you have the right hack). All the F keys used to be handier though, back in the OS 9 days, when I assigned them to do all sort of things.
Francine
Francine
Schwieder

What are these processes and how do I prevent them?

For many years, many have complained of external drives that are in standby/sleep spinning up for no apparent reason. From the user's point of view this is unnecesssary, but to make matters worse, the system usually stops everything else while waiting for the drives.
I have a Mac mini that I use as a home theater pc. The media and backups are on a 5-bay enclosure (no RAID) attached by USB. While watching a video, the unused drives will go into standby mode, which is good. But then, with no user activity, they will spin up, freezing the video and everything else, which is not good. As these are slow drives and spin up sequentially, this can take 10-20 seconds. This may happen once or twice an hour, but sometimes more frequently.
In looking into the causes, I have turned off time Machine (after putting these drives into the Privacy section for good measure). I also prevented Spotlight and fsevents logging with the following:
mdutil -i off /Volumes/<drive1> /Volumes/<drive2> . . .
cd /Volumes/<drive1 and then repeat for other drives>
     rm -rf .fseventsd .Spotlight-*
     mkdir .fseventsd
     touch .fseventsd/no_log .metadata_never_index
As far as I can tell this has worked to stop those processes from accessing the drives after they are mounted, but the problem persists. To find out what else might be causing them to wake up:
sudo fs_usage -w | grep -e Volumes/<drive1> -e /Volumes/<drive2> . . .
and here is what I found last night (actually didn't use the -w last night, thus it is cut off):
18:35:36 fsgetpath   /Volumes/XBMC         0.000026   SSDragHelper
18:35:36 fsgetpath   /Volumes/Stuff        0.000006   SSDragHelper
18:35:36 fsgetpath   /Volumes/DatOptic_3   0.000005   SSDragHelper
18:35:36 fsgetpath   /Volumes/MacBackUp    0.000003   SSDragHelper
18:36:15 fsgetpath   /Volumes/XBMC         0.000026   System Prefe
18:36:15 fsgetpath   /Volumes/Stuff        0.000004   System Prefe
18:36:15 fsgetpath   /Volumes/DatOptic_3   0.000003   System Prefe
18:36:15 fsgetpath   /Volumes/MacBackUp    0.000003   System Prefe
18:55:36 fsgetpath   /Volumes/XBMC         0.000034   GoogleSoftwa
18:55:36 fsgetpath   /Volumes/Stuff        0.000004   GoogleSoftwa
18:55:36 fsgetpath   /Volumes/DatOptic_3   0.000003   GoogleSoftwa
18:55:36 fsgetpath   /Volumes/MacBackUp    0.000003   GoogleSoftwa
After looking into the Google process, I was surprised to find the tentacles that Google puts into your system, and ripped every bit of it out that I could. But I have no idea about what's going on with SSDragHelper and System Prefe (presumable System Preferences). This must be OS X itself? What are these processes doing, and is there any way to prevent them from accessing these disks in this way?

Thanks for the reply Hen3ry. Looks like you've done a lot of investigation. For me, fs_usage entries accompanying spindown are not problems - I'm happy if the drives spin down. My problem is the spinups. But still, I don't think it is necessary to time the fs_usage entries with spinups. If you grep for the drives you're concerned about, you will see any process that would potentially wake them up.
Because my understanding is limited, I also am more concerned with the process/application that is accessing the drives than with the functions or commands they are sending. And the values that are returned by those functions are way beyond what I can deal with.
It's interesting that you've found a difference between your old and new drives. Could you specify the enclosure and drives in each case?
The StorageStatus app looks interesting; thanks for the tip.
Here's a summary of what I've done so far, which I think is working. I need a few more weeks to know for sure.
How to prevent unwanted drive spin-ups
If you are actively using the computer that the enclosure is attached to, nothing on God’s green earth will stop OS X from waking them up after some user action, even ones that seem to have nothing to do with the external drives. But if you leave the computer alone while some application is running, like watching a movie or downloading a file, you have a fighting chance of coaxing OS X into leaving the uninvolved drives alone.
If the drives are shared with any other computers over a network, eject them on those computers
Otherwise, OS X (AppleFileServer) will poll them every 10 seconds. This might not be bad if you want to just keep the drives spinning and the other computer stays awake.
Third-party apps
Make sure no apps are running that might access your drives. Google runs some processes that do this (maybe I’m naïve, but I was so shocked I removed chrome and every other trace of Google from my Mac mini system). Another is iStat and any utility that monitors SMART status in the background.
Don’t let Spotlight index or search the drives
Spotlight is persistent, and it may be necessary to take a variety of steps to stop its various processes (mds, mdworker) from accessing the drives and waking them up. In other words, kill it, drive a stake through its heart, then burn the body:
In System Preferences > Spotlight, add the drives to the Privacy pane.
Add a file called .metadata_never_index to the root of each drive (note the leading period). The easiest way to do this is in Terminal
touch /Volumes/<drive1>/.metadata_never_index
Tell Spotlight AGAIN to keep away from the drive:
mdutil -i off /Volumes/<drive1> /Volumes/<drive2> . . .
Finally delete the Spotlight folder from the drive.
rm -rf /Volumes/<drive1>.Spotlight-*
Stop fseventsd from logging in the drive
This is easy, just putting a no_log file in its folder. I have found that rarely it still writes some files in there, but it doesn’t seem to do so when it causes problems, so . . .
          rm –rf /Volumes/<drive1>/.fseventsd/*
     touch /Volumes/<drive1>/.fseventsd/no_log
Finder sidebar
Some people say that if the drives show in the Sidebar of Finder windows, the Finder will be checking them. I’m not sure. But to be safe, in Finder Preferences > Sidebar, uncheck External Disks.
Just say no to Time Machine
On the home theater mac itself, regular backups shouldn’t be needed. You should be able to just turn Time Machine off. However, it is probably sufficient to simply open System Preferences > Time Machine > Options and add the drives to the list of locations to exclude from backup.
Second, local backups can be disabled with
sudo tmutil disablelocal
Look for other culprits
If the problem persists, use fs_usage, which generates a real-time log of filesystem activity. There is so much going on that you need to use grep to restrict the output to entries that involve your drives. The entries that accompany your drive spin-ups are the ones you really want.
sudo fs_usage -w | grep -e Volumes/<drive1> -e /Volumes/<drive2> . . .
Now leave the keyboard and mouse alone, as many things you might do will cause the drives to be accessed. You probably want to find what does it when you’re not actively interacting with the computer. It’s not really necessary to wait for your drives to sleep and see what wakes them. Any activity you see would probably wake the drives if they were asleep. When you see some activity and want to stop and examine, type Control-C to stop the output. On the far right of each entry is the process or application that accessed the disks.
I got pointers from http://system-log.tyr.org.uk/2012/01/31/how-to-stop-usb-drives-from-spinning-up- unnecessarily-on-os-x-lion/ and http://www.jackenhack.com/disk-that-refuses-to-sleep-in-mac-os-x-how-to-fix-it/

What are the key fields used to group double orders in t-code SDD1?

What are the key fields used to group double orders in t-code SDD1?
Cheers,
VT

Hi,
You can group the duplicate sales documents with the help of the following fields,
Sold-To-Party,Document type,date and sales area details.
Regards,
Gopal.

What are the key requirements to write a recursive cte?

what are the key requirements to write a recursive cte?
when we will go for a recursive cte.

A common table expression (CTE) can be thought of as a temporary result set that is defined within the execution scope of a single SELECT, INSERT, UPDATE, DELETE, or CREATE VIEW statement. A CTE is similar to a derived table in that it is not stored as an
object and lasts only for the duration of the query. Unlike a derived table, a CTE can be self-referencing and can be referenced multiple times in the same query.
A CTE can be used to:
Create a recursive query. For more information, see https://technet.microsoft.com/en-us/library/ms186243%28v=sql.105%29.aspx
Substitute for a view when the general use of a view is not required; that is, you do not have to store the definition in metadata.
Enable grouping by a column that is derived from a scalar subselect, or a function that is either not deterministic or has external access.
Reference the resulting table multiple times in the same statement.
Source : https://technet.microsoft.com/en-us/library/ms190766%28v=sql.105%29.aspx

What are these Key Figures / Attributes

Similar Messages

Maybe you are looking for