What are these strange lines on my scrollbars?

I have these strange yellow lines on my scrollbars when I scroll down a terribly long page very fast.
What are they?

Actually, these diagonal lines indicate that the source footage is shorter than that indicated in the timeline.
This can typically happen if you have placed footage in the timeline and subsequeently cut it with an external editor, AE, for example and reimported the shorter material under the same name.
To lose the diagonal lines, drag the end of the timeline placeholder left (to trim) until they are have gone. .

Similar Messages

What are these horizontal lines on my footage?

Hi Folks,
I just got myself a new computer which is more stronger and i have just finished moving all of the old files on the old computer to the new.
I opened Adobe Preimere Pro and found that some of my footage had these horizontal lines on them (See Picture).
Everything is fine however when the time bar goes to the footage, all there is, is just black.
How can i fix this? What is the problem?
Thanks!
Andy.

Actually, these diagonal lines indicate that the source footage is shorter than that indicated in the timeline.
This can typically happen if you have placed footage in the timeline and subsequeently cut it with an external editor, AE, for example and reimported the shorter material under the same name.
To lose the diagonal lines, drag the end of the timeline placeholder left (to trim) until they are have gone. .

What are these pink lines??

I work on a (New) MacPro with 32GB mem. The first few productions i did was not a prblem at all. Since I use the Atomos Ninja Blade these pink lines apear every few seconds. When I export with 2 pass vbr bitrate encoding they disappear but it pretty annoying to work with. Does anybody have a clue?

martijn baudoin wrote:
I work on a (New) MacPro with 32GB mem. The first few productions i did was not a prblem at all. Since I use the Atomos Ninja Blade these pink lines apear every few seconds. When I export with 2 pass vbr bitrate encoding they disappear but it pretty annoying to work with. Does anybody have a clue?
Are you using MPE in hardware accelerated mode? There's a mega-thread about this problem; a known issue with OS X 10.9.3 (and maybe .2), solved in the beta for 10.9.4. Read up. If it's the same issue, you'll want to disable hardware acceleration for the time being until OS X 10.9.4 is finally released. Or, you could sign up for the OS X beta.

Satellite L850 - What are these strange programs?

Here is a picture of two unknown programs that appear on my PC:
http://img29.imageshack.us/img29/2065/sinttulofvb.jpg
Please, help me. I think they are virus. How can I know what are them and remove them?
Thank you.

On my L855 I have the *Program* item in Start-Up as shown in your image and assumed it was the mouse I plugged in.
It's the third item on the list in
Taskmanager->Start-Up on my pre-installed W8.
I didn't disable it to see if anything stopped working.
Did you?
The second item doesn't appear in my Start-Up, the only item that looks similiar is *Toshiba Places Icon Utility*

What are these gray lines on my screen?

I'm sure this has been asked numerous times, but I haven't been able to find a really good answer to what these are??
I took a photo of my startup screen (the lines only show really well on gray or dark gray backgrounds; white you can't really see them as clear). On the left, it's hard to see, but it looks like a hard-edged light-gray rectangle going down the monitor, and on the right is a large gray line/blob with a few tiny lines up above, towards the right of the screen.
They don't show up in screenshots, and I use the LCD Scrub screen saver, but that doesn't seem to help get rid of them. I don't know if it's dust, or pixels, or a burn-in on my screen...I'm confused on what it is officially known as, how it gets here, and how to fix/remove it without having to buy a new screen??
Thanks for your help!

Could be a possible GPU issue, only way to tell for sure is to take it in for professional diagnostics.

What are these diagonal lines in my timeline?

This project has lines throughout on the timeline. It won't upload to Vimeo. What is it? Thanks.

I see those two clips are Compounds, so you're probably inside of a Compound Clip that has been placed inside of a Project or another Compound Clip timeline. Doesn't look like a Clip timeline to me like that.
You'd have to go back out to the parent timeline, and extend the end of the original Compound Clip.

What are these white lines on my desktop?

That's on the bottom right of my desktop. This screencap doesn't quite capture the "glowiness" of the lines. (The desktop is an anime cartoon, if you're wondering what you're looking at. That's just the bottom right corner.)
They disappear when the dock comes up or when a window's running, so nothing's wrong with the display.
Thoughts? Annoying the **** out of me.

Perhaps it is something on the image you have as the background, but its sort of cut off? Doesnt look like anything to do with the computer hardware or software. Did you try changing the background to see if it is still there?

What are these strange pixels?

This is happening more and more to my iMac 27". There is a pattern of dead pixels (or something) as seen in this image.
That is a screenshot of a white background Photoshop CS5 document zoom level 33% at 300DPI, RGB color mode.
Zoomed in:
Over an image:
This is extremely annoying and started happening a couple weeks ago. I've deleted my Preferences file and it still happens. Anyone have any idea what this is? It only happens at certain zoom levels. If I zoom in a lot or stay very zoomed out, it is not there. This pattern is the same across multiple documents and it's driving me crazy! It looks like confetti over my documents and it is making image editing very difficult.
- Bill

This appears to be graphic corruption. Let's do this test:
1. Go to Photoshop>Preferences>Performance.
2. Uncheck "Enable OpenGL Drawing", click OK.
3. Reopen the image.
If the behavior goes away, it is time to uninstall and reinstall the video driver for your video card.

PCOLL_CONTROL, PCST_TXN,...What are these objects? JBO-28039:Root node for collection

I've a UIX JSP Application with BC4J developed with JDeveloper RC.
I noted that in my schema there are these "strange" db objects:
PCOLL_CONTROL
PCST_MYPACKAGEMODULE_SEQ
PCST_MyPackageModule
PCST_TXN
PCST_TXN_SEQ
Can anyone explain what are they or where can I find documentation about them ?
When and why Jdev create them ?
Beside some people that use my application got the following Error:
"JBO-28039: Root node for collection TXN of id -1 is invalid......".
I think that it's connected with the objects listed above.
Has someone experienced this problem ?
thank you
Isabella

Could you provide more information regarding this issue:
1. When you mention that some people that use your application receive the exception do you mean that the
exception is thrown from the application and displayed to the user or do you mean that the exception is simply logged
in the Diagnostic output? The latter may be expected in some scenarios.
2. Could you provide a full stack trace for the exception?
3. Could you provide the BC4J diagnostic output generated when the exception occurs (specify the VM switch
-Djbo.debugoutput=console at the command line)?
Thanks,
JR

What are these weird blue dashes?

What are these weird blue dashes that got inserted into my Pages document since I closed it? They appear with each new paragraph start or break and I can't see how to get rid of them! ( I have OS 10.6.8 and Pages 4.1)

Probably you used tabs to indent your paragraphs instead of using First Line Indent and you have Show Invisibles turned on:
Menu > View > Hide Invisibles
Peter

What are these called?

Hi,
I am trying to figure out what this element is? Since I dont know what its actually called I have to provide a picture for my example.
What are these elements called? I have pointed to them in my image with the red arrows. Im pretty sure the horizontal ones are a "horizontal rule". But what about the vertical ones? And how does one implement them in a site? http://i52.photobucket.com/albums/g29/FartyMcFly/Example.jpg
Thanks for any answers in advance and I apologize if its something stupidly simple.
Thanks

How do I set the length of the border lines.
I'm afraid there is no support for that in current CSS2 standards.
You will be able to do it with CSS3 border-images. But not for a few more years.
http://www.css3.info/preview/border-image/
In the meantime, you could put your border on a neighboring division -- see example below:
http://alt-web.com/TEMPLATES/CSS-Basic-2-column-layout.shtml
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

What are these dots on my iPhone 5 SIM tray?

There are these odd white dots on my inside edge of the SIM tray in my iPhone 5. I don't recall seeing these dots in previous generations of iPhone 5.
I found a similar thread on MacRumors about this, but there appears to be no answer.
Here is a picture:
For my iphone, I have an extra dot (so three dots and a line), so it is not exactly the same.
What are these? Are these normal? Does your phone's SIM tray have those too? How many dots?

How do you know about this? How many "configurations" are there of these dots? This is the first time I had seen it in an iPhone (as compared to previous gens).

When I render and Export there are these little lines around moving objects

When I render and Export there are these little lines around moving objects, what are they and how do I fix it?

The lines are caused by the video being interlaced.
If you export to DVD they should no longer appear. However, if they don't disappear you can use the Deinterlace filter on the footage whilst in FCE.
How are you exporting ..... QT Movie or QT Conversion ....... and what are you exporting to - the internet or DVD?

What are these processes and how do I prevent them?

For many years, many have complained of external drives that are in standby/sleep spinning up for no apparent reason. From the user's point of view this is unnecesssary, but to make matters worse, the system usually stops everything else while waiting for the drives.
I have a Mac mini that I use as a home theater pc. The media and backups are on a 5-bay enclosure (no RAID) attached by USB. While watching a video, the unused drives will go into standby mode, which is good. But then, with no user activity, they will spin up, freezing the video and everything else, which is not good. As these are slow drives and spin up sequentially, this can take 10-20 seconds. This may happen once or twice an hour, but sometimes more frequently.
In looking into the causes, I have turned off time Machine (after putting these drives into the Privacy section for good measure). I also prevented Spotlight and fsevents logging with the following:
mdutil -i off /Volumes/<drive1> /Volumes/<drive2> . . .
cd /Volumes/<drive1 and then repeat for other drives>
     rm -rf .fseventsd .Spotlight-*
     mkdir .fseventsd
     touch .fseventsd/no_log .metadata_never_index
As far as I can tell this has worked to stop those processes from accessing the drives after they are mounted, but the problem persists. To find out what else might be causing them to wake up:
sudo fs_usage -w | grep -e Volumes/<drive1> -e /Volumes/<drive2> . . .
and here is what I found last night (actually didn't use the -w last night, thus it is cut off):
18:35:36 fsgetpath   /Volumes/XBMC         0.000026   SSDragHelper
18:35:36 fsgetpath   /Volumes/Stuff        0.000006   SSDragHelper
18:35:36 fsgetpath   /Volumes/DatOptic_3   0.000005   SSDragHelper
18:35:36 fsgetpath   /Volumes/MacBackUp    0.000003   SSDragHelper
18:36:15 fsgetpath   /Volumes/XBMC         0.000026   System Prefe
18:36:15 fsgetpath   /Volumes/Stuff        0.000004   System Prefe
18:36:15 fsgetpath   /Volumes/DatOptic_3   0.000003   System Prefe
18:36:15 fsgetpath   /Volumes/MacBackUp    0.000003   System Prefe
18:55:36 fsgetpath   /Volumes/XBMC         0.000034   GoogleSoftwa
18:55:36 fsgetpath   /Volumes/Stuff        0.000004   GoogleSoftwa
18:55:36 fsgetpath   /Volumes/DatOptic_3   0.000003   GoogleSoftwa
18:55:36 fsgetpath   /Volumes/MacBackUp    0.000003   GoogleSoftwa
After looking into the Google process, I was surprised to find the tentacles that Google puts into your system, and ripped every bit of it out that I could. But I have no idea about what's going on with SSDragHelper and System Prefe (presumable System Preferences). This must be OS X itself? What are these processes doing, and is there any way to prevent them from accessing these disks in this way?

Thanks for the reply Hen3ry. Looks like you've done a lot of investigation. For me, fs_usage entries accompanying spindown are not problems - I'm happy if the drives spin down. My problem is the spinups. But still, I don't think it is necessary to time the fs_usage entries with spinups. If you grep for the drives you're concerned about, you will see any process that would potentially wake them up.
Because my understanding is limited, I also am more concerned with the process/application that is accessing the drives than with the functions or commands they are sending. And the values that are returned by those functions are way beyond what I can deal with.
It's interesting that you've found a difference between your old and new drives. Could you specify the enclosure and drives in each case?
The StorageStatus app looks interesting; thanks for the tip.
Here's a summary of what I've done so far, which I think is working. I need a few more weeks to know for sure.
How to prevent unwanted drive spin-ups
If you are actively using the computer that the enclosure is attached to, nothing on God’s green earth will stop OS X from waking them up after some user action, even ones that seem to have nothing to do with the external drives. But if you leave the computer alone while some application is running, like watching a movie or downloading a file, you have a fighting chance of coaxing OS X into leaving the uninvolved drives alone.
If the drives are shared with any other computers over a network, eject them on those computers
Otherwise, OS X (AppleFileServer) will poll them every 10 seconds. This might not be bad if you want to just keep the drives spinning and the other computer stays awake.
Third-party apps
Make sure no apps are running that might access your drives. Google runs some processes that do this (maybe I’m naïve, but I was so shocked I removed chrome and every other trace of Google from my Mac mini system). Another is iStat and any utility that monitors SMART status in the background.
Don’t let Spotlight index or search the drives
Spotlight is persistent, and it may be necessary to take a variety of steps to stop its various processes (mds, mdworker) from accessing the drives and waking them up. In other words, kill it, drive a stake through its heart, then burn the body:
In System Preferences > Spotlight, add the drives to the Privacy pane.
Add a file called .metadata_never_index to the root of each drive (note the leading period). The easiest way to do this is in Terminal
touch /Volumes/<drive1>/.metadata_never_index
Tell Spotlight AGAIN to keep away from the drive:
mdutil -i off /Volumes/<drive1> /Volumes/<drive2> . . .
Finally delete the Spotlight folder from the drive.
rm -rf /Volumes/<drive1>.Spotlight-*
Stop fseventsd from logging in the drive
This is easy, just putting a no_log file in its folder. I have found that rarely it still writes some files in there, but it doesn’t seem to do so when it causes problems, so . . .
          rm –rf /Volumes/<drive1>/.fseventsd/*
     touch /Volumes/<drive1>/.fseventsd/no_log
Finder sidebar
Some people say that if the drives show in the Sidebar of Finder windows, the Finder will be checking them. I’m not sure. But to be safe, in Finder Preferences > Sidebar, uncheck External Disks.
Just say no to Time Machine
On the home theater mac itself, regular backups shouldn’t be needed. You should be able to just turn Time Machine off. However, it is probably sufficient to simply open System Preferences > Time Machine > Options and add the drives to the list of locations to exclude from backup.
Second, local backups can be disabled with
sudo tmutil disablelocal
Look for other culprits
If the problem persists, use fs_usage, which generates a real-time log of filesystem activity. There is so much going on that you need to use grep to restrict the output to entries that involve your drives. The entries that accompany your drive spin-ups are the ones you really want.
sudo fs_usage -w | grep -e Volumes/<drive1> -e /Volumes/<drive2> . . .
Now leave the keyboard and mouse alone, as many things you might do will cause the drives to be accessed. You probably want to find what does it when you’re not actively interacting with the computer. It’s not really necessary to wait for your drives to sleep and see what wakes them. Any activity you see would probably wake the drives if they were asleep. When you see some activity and want to stop and examine, type Control-C to stop the output. On the far right of each entry is the process or application that accessed the disks.
I got pointers from http://system-log.tyr.org.uk/2012/01/31/how-to-stop-usb-drives-from-spinning-up- unnecessarily-on-os-x-lion/ and http://www.jackenhack.com/disk-that-refuses-to-sleep-in-mac-os-x-how-to-fix-it/

My company loaded profiles onto my iPad for email and calendars.. There is also a signing certificate and a certificate. What are these for? Additionally are they able to monitor apps and usage, ie Internet usage when it is not on their wifi?

My company loaded profiles onto my iPad for email and calendars.. There is also a signing certificate and a certificate. What are these for?
Additionally are they able to monitor apps and usage, ie Internet usage when it is not on their wifi?
I do not have any VPN enabled?

Do you happen to have an Android? If so and depending on what version there is a great data usage analyse tool built-in. See if you can go to Settings -> Data Usage from there you can pick a current or previous billing cycle and then use the vertical sliders to select a date range and it will filter the usage data per app to show you exactly what app(s) were using data during that time frame.

What are these strange lines on my scrollbars?

Similar Messages

Maybe you are looking for