What are tools availble for debugging a Java Program?
Hi Friends,
I find difficulty to find errors in Java Client in JMS.Please tell me debug tool.Please reply as earlier as possible.
Thanks
Bye
Ok, it 's easy ,
you must go to the properties of your java project that you are working on. There is a section in the property that you can import or include external jar files. By adding these jar files, you can work with them easily.
javax.jms.jar
jms.jar
Have fun,
APT
Similar Messages
-
4.6C to ERP6.0 Upgrade - what are the recommendations for Unicode and Java
Hi All,
Forgive such a basic question.
We are just beginning to look at our ERP6.0 upgrade and am unclear whether we should convert to unicode at the same time, and also what are the uses for the Java stack.
Unicode?
We are a single language Latin-1 site so don't need Unicode. However will it become mandatory eventually? Are we better, if we have the opportunity now, just to convert. Also I believe the Java stack is only Unicode. Does ASCII ABAP and Java Unicode complicate things?
Java?
Will we need it? We are proposing a technical upgrade from our 4.6c Javaless environment. Where does Java come in to play in ERP6.0? Doesn't it increase greatly the iSeries HW requirements? (I'm looking at a 2 way 550 at the moment)
Look forward to hearing your views.
Regards
SteveHi Stephen,
at the moment, in a latin-1 environment Unicode is for old customers not a requrirement. This might change in 5-10 years ...
Java: No problem at all with ASCII (in latin-1 environments)
=> there is no need for you, but you could go for it. We did several Unicode conversions already and these Latin-1 conversions are pretty easy and simple especially on iSeries, because of the special InPlace Unicode Conversion.
... but this can be done at any time ...
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de -
Why do iPhones/iPad not support Flash Player/Java and what are my alternatives for browsing sites using these plug-ins?
There are also iSwifter, Photon, Skyfire, etc., some only support Flash some support Java and Flash.
Adobe never made a version of Flash for iOS and closed their mobile flash division a couple of years ago. You can get Flash on other personal devices but you will be using a 2 year old version that has not been patched for security vulnerabilities.
When the original iPhone was released Mr. Jobs said it would never run Java as it was old technology and a security risk. Nothing has changed since. -
I have been waiting since months for the new IPad4G 64 Gbt. ON recommendation of Apple Support I have changed my IPad 4G last week in the hope that something was wrong with the firts one I bought.
The one I have now has the same problems. WiFi is working however 4G not at all. Apple what can I do? What are you doing for the thausands of German Apple fans who have bought a IPad4G and can not use it. We need a solution NOW. I´m working with this tool and need to be able to rely on it.
Thanks for a feed back.JKerki wrote:
They had not heard about the problem, however made no problem to change it for an other one. Apple Support Germany pretendet not to know about this problem. However the web is full of complaints.
It would be advisable for Apple to react officially on it. € 799, - for something that doesn´t function is no fun :-((
Isn't replacing your iPad Apple "officially" acting on it? -
What are the security implications of having JAVA running on my Mac Book Pro?
What are the security implications of having JAVA running on my Mac Book Pro?
Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers.
Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site. -
What are tools used by the xi/pi system ,to bug the errrors
hi gurus,
what are tools used by the xi/pi system ,to bug the errrors.
regards,
subba reddyFor all kind of errors the only tool available which bugs or say alerts for the error is Alert Management.
Alerts are messages which can be raised in case of failure.
Alerts - used for system errors, u can send a mail or msg whenever there is any failure. alert configuration can be done in t-code - ALERTCATDEF.
Alert Categrory can be defined in transaction ALRTCATDEF on abap stack. we can assign receipients to every alert category which specifies who will receive alert in case of error.
Alert rules can be defined in RWB.
for configuring alerts u need follwing roles first for defining or creating alertcategory
the roles reuired to access the RWB are:
1. SAP_XI_RWB_SERV_USER
2. SAP_XI_RWB_SERV_USER_MAIN
The roles for the Alert Management are:
1. SAP_ALM_ADMINISTRATOR
2. SAP_ALM_CUSTOMIZER
3. SAP_BC_ALM_ALERT_USER
Once this is done
alert category is defined and then tested
For Alert please see
The specified item was not found.
http://help.sap.com/saphelp_nw04/helpdata/en/56/d5b54020c6792ae10000000a155106/content.htm
For details follow this link,
http://help.sap.com/saphelp_nw70/helpdata/en/80/942f3ffed33d67e10000000a114084/frameset.htm -
What are best practices for managing my iphone from both work and home computers?
What are best practices for managing my iphone from both work and home computers?
Sync iPod/iPad/iPhone with two computers
Although it isn't possible to sync an Apple device with two different libraries it is possible to sync with the same logical library from multiple computers. Each library has an internal ID and when iTunes connects to your iPod/iPad/iPhone it compares the local ID with the one the device normally syncs with. If they are the same you can go ahead and sync...
I have my library cloned to a small 1Tb USB drive which I can take between home & work. At either location I use SyncToy 2.1 to update the local copy with the external drive. Mac users should be able to find similar tools. I can open either of the local libraries or the one on the external drive and update the media content of my iPhone. The slight exception is Photos which normally connects to a specific folder on a specific machine, although that can easily be remapped to the current library if you create a "Photos" folder inside the iTunes Media folder so that syncing the iTunes folders keeps this up to date as well. I periodically sweep my library for new files & orphans withiTunes Folder Watch just in case I make changes at one location but then overwrite the library with a newer copy from the other. Again Mac users should be able to find similar tools.
As long as your media is organised within an iTunes Music or Tunes Media folder, in turn held inside the main iTunes folder that has your library files (whether or not you let iTunes keep the media folder organised) each library can access items at the same relative path from the library folder so the library can be at different drives/paths on different machines. This solution ensures I always have adequate backups of my library and I can update my devices whenever I can connect to the same build of iTunes.
When working with an iPhone earlier builds of iTunes would remove any file not physically present in the local library, even if there was an entry for it, making manual management practically redundant on the iPhone. This behaviour has been changed but it will still only permit manual management with a library that has the correct internal ID. If you don't want to sync your library between machines on a regular basis just copy the iTunes Library.itl file from the current "home" machine to any other you want to use, then clean out the library entires and import the local content you have on that box.
tt2 -
What are Wrapper classes and what are they used for ?
What are Wrappter classes and what are they used for ?..Also, any examples would be great to understand this concept
Wrapper classes are used to enclose primitive data
types so that they can be used in instances where an
object is required. For example, if you want to add an
integer to an ArrayList, you can't use this:java.util.List al = new ArrayList();
int i=123;
al.add(i);because the ArrayList expects data of type object. In
order to all the integer to the ArrayList, you must wrap
it in the Integer wrapper class. This works:java.util.List al = new ArrayList();
int i=123;
al.add(new Integer(i));Hope that helps.
Mark -
What are the Prerequisites for MDM
HI,
I would like to know what are the prerequisites for SAP MDMHi,
for MDM 5.5 installation, requirements are:
MDM 5.5 Server:
--> Microsoft windows 2000/ 2003/xp
--> Linux -- kernel version 2.4 or higher with the following
libstdc ++.so.5 or higher
glibc 2.2 or higher
 sun Solaris - 8 - sunos 5.8 rev .02/02 or later
DBMS:
--> Microsoft SQL server 2000 ( version 8.0 sp3)
--> Oracle 9.2
--> IBM DB2 8.1 version
MDM 5.5 console/clients:
--> Windows Xp, 2000, 2003 all versions
MDM 5.5 API's:
--> COM
--> JAVA
Desktop Publishing:
--> Quark Express (windows and Macintosh)
--> Adobe In Design (windows and Macintosh)
Installation: MDM 5.5 console/clients:
--> Windows Xp, 2000, 2003 all versions
1.First we have to maintain Database server.(Sql 2000, Oracle 9i)
2. We have to install MDM Server.
3. After that install GUI clients.
3.1. Console
3.2.Importmanager
3.3.Datamanger
3.4.Syndicator
4. Import manager Batch server, Syndication Batch server.
5. Next coming to repositories go to Business content folder And select repositories .
6.Program files --> sap MDM 5.5 --> Server > Archives> Put the repositories.
7. In Console Mount the MDM server.
8. Unachieve the repositories based upon Requirement
Regarding this Any issues please let me know.I will clarify ur doubts.
For MDM Learning
https://www.sdn.sap.com/irj/sdn/mdm-elearning
Please go through this link
Regards
Hari -
My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.
Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius -
In Address Book, Lion, what are the checkmarks for when you Edit a Contact?
In Address Book for Lion, when you are in the Add/Edit a Contact window, what are the checkboxes for?
I am not seeing any checkboxes when I edit in Address Book in Lion, can you take a screen shot (Shift Command 4) of what you're seeing and post it?
BTW please fill out your profile (under Your Stuff above) so we know what machine and version of Lion you're using. -
What are the steps for loading master data
Hello
what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
if anyone has documents please send me the documents i will be really greatful
[email protected] thanks everyone
EvionHi Heng,
Download the data into a CSV file.
Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
http://www.sap-img.com/abap/vendor-master-upload-program.htm
Reward Points for the useful solutions.
Regards,
Harini.S -
What are the settings for Primere Elements 9 if I've filmed with a Canon Powershot sx50 HS?
I just got this camera and I want the best quality possible. Unfortunately, it's hard for me to fully know if the settings I try create that. I get a fuzz or noise on objects like if I'm wearing a black jacket it's like static. When I put the video on my phone which is an Android Galaxy s4 it converts it into mp4 format and I get much more clear results than on my computer which perplexes me. I did a lot of trial and error with my previous camera (JVC Full HD Everio) which I got the same results. My newer Canon should be leagues ahead of the JVC, but I really can't tell as of yet. If anyone could help that would be awsome. I have examples of my trials and errors from my Youtube videos which you can see I felt I was slowly making progress with the JVC Oppositeofhood - YouTube
Opposite
Then I saw your latest post
Wait, I think I just found it. I pressed record on different settings to take pictures with like portrait to see if it would make a difference and when I uploaded them to my computer I found where it shows the BIt rate and it varied. They run at 23 frames per second 1920 x 1080 MOV video files and all the Bit rates are like 36,356 35,414 ,36,521
If your camera is recording with a variable bitrate, the Bitrate variations from file to file should not be contributing to the issue. But it does raise the issue related to whether or
not we are setting the appropriate bitrate level in the export settings. What are the units for 36,356, 35,414, and 36,517 -
kbps (also can be written Kbps) and is kilobits per second
or
Mbps which is megabits per second.
Let us try this for one of your 1920 x 1080p24 videos.
Go through the following workflow
Manually set project preset...
NTSC
DSLR
1080p
DSLR 1080p24
When you go to export your edited Timeline content, then use
Share
Computer
QuickTime
with Presets = NTSC DV 16:9 - that is going to be customized to 1080p24 (H.264.mov) under the Advanced Button/Video Tab of that preset
The essential settings under the Advanced Button/Video Tab
Video Codec = H.264
Frame Width = 1920
Frame Height = 1080
Frame Rate = 23.976
Field Type = Progressive
Aspect = Square Pixels (1.0)
Now here is where we are going to experiment....
Bitrate
Check Mark next to Limit Data Rate to and type in 36000 before kbps
note the file size of the export as well as the quality of the playback.
Repeat the whole process but in export
Remove the check mark next to Limit Data Rate. The Bitrate field will be disabled.
note the file size of the export as well as the quality of the playback.
We will be watching for your results.
Thanks.
ATR -
What are the settings for datasource and infopackage for flat file loading
hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumarLoading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets. -
What are the settings for rework order quality inspection
HI,
Iam doing production order confirmation at the GR time some oprations are rejected.that operations i want too rework order CO07 process without GR ,i want to Quality inspection in REWork order.
What are the settings for rework order Quality inspection?Refer beautiful document
http://wiki.sdn.sap.com/wiki/display/HOME/ReworkInProduction
Maybe you are looking for
-
Error when starting a jnlp that should work fine
When i try to launch a jnlp file with Web Start, I get an "Unable lo launch the application" error right after the "Java Starting..."-splash appears. Details: MissingFieldException[ The following required field is missing from the launch file: <jnlp>
-
How can I give information about Description and Comments?
If I select just one episode of a podcast, control + get info > Video > Description or control + get info > Info > Comments What should I write in the rss feed ?
-
Vendor and Account Assignment Issues
Hi All, Iam Working in ECS SRM 5.0, When We are trying to creat SC, we are getting following errors : 1.Vendor 0000100029 not intended for purch. org. (Item Sourcing Strategy & Plan Consulting ) SOS is automatically assiged to particular product ID
-
Can I keep signed in to the Apple forum instead of daily sign in?
Hi. I get logged out everyday from the Apple Support Forums. Can I keep myself signed in, on my iphone Device which I am always carrying? thanx
-
Firefox installer not working for Windows 8.1?
I downloaded the latest Firefox installer and tried to run it. I got the Windows prompt to accept the software install, and then...... nothing. The installer never runs. Does anyone know what seems to be the issue?