What Backup Software do you use to backup data to Airport Extreme USB HD?

Just Curious. Acronis is not working for me.

I use Genie-Soft's Genie Backup Manager Home ... However, I have only tried it from both Windows Vista & Windows 7 RC ... not XP.

Similar Messages

  • How to Access time capsule backup data on Airport Extreme

    Hi All,
    Thank you in advance.
    The Problem : One of our Mac Book Air was stolen and we have the MBA backed up on Airport Extreme.
    Currently we don't have another MBA that can do a full restore. I just want to access the Airport Extreme Time Capsule Data and get few files that is in the backups.
    I have been searching for a solution and still can't find a way to do this. It is just 1 set of files inside the backup.
    Thank you again for all the help.
    G

    Hi LaPastenague
    I went over the pondini.org website, however still I can't access other users data T
    I can go and review my own data.
    The Data is backed up ( shared ) on Time Capsule ( which means all the users in the same house uses this one single time capsule to backup )
    http://www.apple.com/airport-time-capsule/
    ## We currently don't know what was the username or password the user was using.
    I am also looking at the pondini.org and
    "With Accounts:  this allows setting up separate accounts, each with its own password and folder.  You can set up accounts and passwords that correspond to the ones on your Mac (but passwords must be changed separately), and/or you can create different ones.  Each account may have permission to Read, or Read and Write, or Not allowed.  This is not recommended for use with Time Machine backups, as no single user can see everything on the disk(s).  That's especially important if there's a space problem -- you'd have to connect with each account in turn to see the whole picture.  The backups for each Mac are protected by the usual permissions anyway, so in most cases this option is overkill.  There are also a few minor differences in the content of some of the windows when selecting the backup destinations"
    We are usuing this "With Accounts" settings

  • How do I use existing TM backup with upgraded Airport Extreme?

    I replaced my old Airport Extreme with a dual-band Airport Extreme. I was previously using an external drive connected to the old AE for Time Machine backups. I now have everything set up, I can see the drive on the new AE in the Finder and select it in Time Machine preferences, but it doesn't show "Oldest Backup" "Latest Backup" information and I fear it's going to try to create a new backup when it runs. How can I get it to use and add to the existing backup?

    djlstewart wrote:
    I replaced my old Airport Extreme with a dual-band Airport Extreme. I was previously using an external drive connected to the old AE for Time Machine backups. I now have everything set up, I can see the drive on the new AE in the Finder and select it in Time Machine preferences, but it doesn't show "Oldest Backup" "Latest Backup" information
    No, it won't show that until a backup is done. See #B3 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
    and I fear it's going to try to create a new backup when it runs. How can I get it to use and add to the existing backup?
    It should just do an incremental backup.
    |
    But, you need to know, backing-up that way is "iffy" and +*not supported by Apple.+* See [Using Time Machine with an Airport Extreme Air Disk|http://web.me.com/pondini/Time_Machine/Airport.html] (or use the link in *User Tips* at the top of this forum).

  • Nas on airport extreme not recognized by time machine. same nas was previously used as time machine backup on different airport extreme. are there any configuration files that i can delete to fix this problem ?

    nas on airport extreme not recognized by time machine. same nas was previously used as time machine backup on different airport extreme. are there any configuration files that i can delete to fix this problem ?

    Time Machine has been working just fine, but in the last week or two it has given up the ghost. I reset the connections to the drive, and it will basically save a few bytes of data and then hang.
    Although Apple originally announced, prior to the release of the first 802.11n AirPort Extreme Base Stations (AEBSn), that it would support Time Machine backups to AirPort Disks, they removed that option before they did finally release the base station for sale.
    Since then, Apple has posted (as you have noted) that they DO NOT support Time Machine backups to AirPort Disks. As far as I know, they have not changed from that position and those who do these backups find that they become corrupted over time. Sorry, but it sounds like you just confirmed that for yourself.
    1) Has one of the recent updates either on the AE (firmware) or OSX disabled this function?
    No. Again, this feature has never been supported by Apple for every generation of AEBSn released.
    2) Are there any changes I can make to get this working again?
    If your data backups are critical to you, then you will want to use a different solution for your Time Machine backup destination drive strategy. I would suggest that you connect your WD My Book directly to your Mac in the mean time.
    Your other options would be to either use a Time Capsule (which interestingly does support TM backups to AirPort Disks) or a non-Apple solution like the Drobo FS or HP MediaSmart server.

  • What version control system you use?

    We are 20 developer and we use bitkeeper as a version control system.
    But we have 4 envirronnement.
    dev/test/pre-prod/prod.
    Sometimes, 2-3 projects are affecting the same packages.
    And different packages version is all over the place since we have 4 envirronnements.
    What version control system you use for packages?
    Would be cool to have a version control system intergrated to our tools, like toad, pl/sql dev or sql developer, is there one for those tools?
    Is the tool you using it doing all you want it to do?
    Have any link for me to check out?

    Hi,
    I recommend SourceAnywhere Standalone to you. It is an SQL-based source control application that provides all of the key features of VSS, plus much more. It is well integrated with Microsoft Visual Studio 6/2003/2005/2008, Dreamweaver and Eclipse. Here is the home page of SourceAnywhere Standalone:
    http://www.dynamsoft.com/Products/SAWstandalone_Overview.aspx
    The Hosted edition, SourceAnywhere Hosted that is delivered as a SaaS application is also available.
    http://www.dynamsoft.com/Products/SAWhosted_Overview.aspx
    You can take a look.
    Thanks,
    Catherine Sea
    www.dynamsoft.com
    the leading developer of version control and issue tracking software
    Message was edited by:
    Catherine Sea

  • B2B software package you use for AS2

    Hi All,
    We are using Oracle 10G B2B. We are adding a new supplier. Our new supplier asks " what is your B2B software package you use for AS2"
    I said " Application server integration B2B of version 10.1.2.3.0", then immediately he replied
    "I could not find Oracle Application Server Integration B2B 10.1.2.3 listed on the Drummond Group website for AS2 interoperability certification. Would the software package be listed under another name?"
    Could you please help us to reply his question..

    Hi,
    Ask your supplier to check the AS2-3Q05 report of Drummond group. It is available at below link -
    http://www.drummondgroup.com/html-v2/as2-archive.html
    You can find Oracle Application Server 10g (10.1.2) listed here. Also give him the refernce of below doc -
    http://www.drummondgroup.com/pdfs/AS2_5.05.04_Final_release.pdf
    Regards,
    Anuj

  • Which software do you use on the linux or unix platform

    I am learning oracle, so I am wondering, in the real world, which software do you use to administrate oracle in the company, on the linux or unix platform? sqlplus?
    certainly, I think you can also open the OEM GUI in linux or unix

    If you are learning, surely enough , learning any o/s other than windows will help. About the industry, there is not just one player that rules in the o/s market. It depends on a lot of factors , cost being the most dominating one. Linux, being a little less costlier, is surely a good choice for many but so is HP UX or AIX. Without bothering about what is more popular, learn one which you can get your hands on in your learning environment more easily. For example, it would be tough to have a AIX based machine in your home and a linux based would be lot easier. So learn one, ,learn it good. When you go to a different shop, use your previous knowledge and learn the know-hows of that o/s as well.
    HTH
    Aman....

  • What Apple software do I use to create a slideshow with voiceover?

    What Apple Software do I use to create a slideshow with voice over?

    There are many ways to produce slide shows using iPhoto, iMovie or iDVD and some limit the number of photos you can use (iDVD has a 99 chapter (slide) limitation).
    If what you want is what I want, namely to be able to use high resolution photos (even 300 dpi tiff files), to pan and zoom individual photos, use a variety of transitions, to add and edit music or commentary, place text exactly where you want it, and to end up with a DVD that looks good on both your Mac and a TV - in other words end up with and end result that does not look like an old fashioned slide show from a projector - you may be interested in how I do it. You don't have to do it my way, but the following may be food for thought!
    Firstly you need proper software to assemble the photos, decide on the duration of each, the transitions you want to use, and how to pan and zoom individual photos where required, and add proper titles. For this I use Photo to Movie. You can read about what it can do on their website:
    http://www.lqgraphics.com/software/phototomovie.php
    (Other users here use the alternative FotoMagico:  http://www.boinx.com/fotomagico/homevspro/ which you may prefer - I have no experience with it.)
    Neither of these are freeware, but are worth the investment if you are going to do a lot of slide shows. Read about them in detail, then decide which one you feel is best suited to your needs.
    Once you have timed and arranged and manipulated the photos to your liking in Photo to Movie, it exports the file to iMovie  as a DV stream. You can add music in Photo to Movie, but I prefer doing this in iMovie where it is easier to edit. You can now further edit the slide show in iMovie just as you would a movie, including adding other video clips, then send it to iDVD 7, or Toast,  for burning.
    You will be pleasantly surprised at how professional the results can be!
    To simply create a slide show in iDVD 7 onwards from images in iPhoto or stored in other places on your hard disk or a connected server, look here:
    http://support.apple.com/kb/HT1089

  • What kind software we should use under VISTA to creat new partition.

    hi,there. i've use the boot camp to install the window vista in my macbook. but the boot camp only creat one partition for it. therefore all the partition i have under vista is C partiton. i want to divide that C partiton into 2 or more partitons, but i just wonder will that gonna destroy the boot information for Mac OS? what kind software i should use to avoid that problem? thanks.

    Don't know. Never used it. You should probably post your question in the Boot Camp discussions
    http://discussions.apple.com/forum.jspa?forumID=1165

  • What sequence setting would you use to edit 1280 x1080 DVCProHD (P2) and 1920 x 1080 AVCHD (Sony) in FCP. Experiencing Quality and rendering issues.

    What sequence setting would you use to edit both 1280 x1080 DVCProHD (P2) and 1920 x 1080 AVCHD (Sony) in a single timeline in FCP. I'm experiencing quality and rendering issues.  I've tried numerous settings but can't seem to figure this one out.  Thanks for your assistance.

    Although you can combine the avchd 1920x1080 material with prores 1920x1080 in the same timeline, you might land up saving time just converting everything to 1920x1080 prores 422.   You'd probably reduce the amount of rendering while you're working and exporting when you're done by a great deal.  This workflow will require much more drive space.

  • Another quick poll: "What CFML IDE do you use?"

    G'day
    As per my survey request the other day, it would help me out if you could answer three questions about what you use to write your CFML code: http://adamcameroncoldfusion.blogspot.co.uk/2012/10/what-cfml-ide-do-you-use.html
    Cheers.
    Adam

    Brother will kill brother
    Spilling blood across the land
    Killing for religion
    Something I dont understand
    Fools like me,who cross the sea
    And come to foreign lands
    Ask the sheep,for their beliefs
    Do you kill on gods command?
    A country thats divided
    Surely will not stand
    My past erased,no more disgrace
    No foolish naive stand
    The end is near,its crystal clear
    Part of the master plan
    Dont look now to israel
    It might be your homelands
    Holy wars
    Upon my podium,as the
    Know it all scholar
    Down in my seat of judgement
    Gavels bang,uphold the law
    Up on my soapbox,a leader
    Out to change the world
    Down in my pulpit as the holler
    Than-thou-could-be-messenger of god
    Wage the war on organized crime
    Sneak attacks,repel down the rocks
    Behind the lines
    Some people risk to employ me
    Some people live to destroy me
    Either way they die
    They killed my wife,and my baby
    With hopes to enslave me
    First mistake...last mistake|
    Paid by the alliance,to slay all the giants
    Next mistake...no more mistakes|
    Fill the cracks in,with judicial granite
    Because I dont say it,dont mean I aint
    Thinkin it
    Next thing you know,theyll take my thoughts away
    I know what I said,now I must scream of the overdose
    And the lack of mercy killings

  • Poll - Which Version Control Software Do You Use With LabVIEW?

    I wish the forums had a poll feature. I created a poll in the developer community - Which Version Control Software Do You Use With LabVIEW?
    http://decibel.ni.com/content/polls/1818
    Edit: I just saw that there already is a poll for that
    http://decibel.ni.com/content/polls/1050
    =====================
    LabVIEW 2012

    julieann wrote:
    You can use a source control provider to share files among multiple users, improve security and quality, and track changes to shared projects. Use LabVIEW with third-party source control providers so you can check out files and track changes from within LabVIEW. See info. here.
    Looks suspiciously like someone trying to increase hits on their blog. A coincidence that it was posted the same day as the blog post?
    Message has been reported to the moderator. Laura can decide whether or not it's appropriate.

  • What to do if you use a segmented control in interface builder and it doesn't work ?

    What to do if you use a segmented control in interface builder and it doesn't work ?

    The first thing to do would probably be to update your profile and/or signature so people will know what OS, language, and development system you are using, then perhaps include some additional information such as what "it doesn't work" means, and possibly a few other things like some error logs, what you have done so far, maybe a code snippet or two, etc.

  • What code editor do you use with Business Catalyst?

    I am having many issues with Dreamweaver & BC:
    1 - It keeps thinking that I have the trial version, even though I have a license to Creative Cloud and Creative Cloud shows that I have it.
    2 - When I try to use the integrated Business Catalyst palette, it logs me out of the admin console for my BC site. ANNOYING.
    3 - Most importantly, it doesn't put the files to the server successfully, consistently.  I have change my file and re-put the file 5-6 times before it works.  VERY FRUSTRATING!
    After an hour on the phone with Dreamweaver customer support, the issue is still not resolved.
    So, now I ask you all, what code editor are you using in conjunction with Business Catalyst while implementing your Business Catalyst websites?

    Code editors, I used to use editplus until Adobe locked 90% of the FTP programs out there, now I use Sublime 2 with SFTP plugin but it's uber clunky and not so happy with it...

  • \What command keys do i use to fill data. I need this for return address labels

    What command keys do i use to fill data.I need this for return address labels

    Here's an overly chatty example that will show you what's happening:
    $strContacts = 'Tony Stark', 'Anthony Edward Stark'
    Write-Host 'User names:'
    $strContacts
    Write-Host
    foreach ($strContact in $strContacts ) {
    Write-Host "Start of loop. Processing $strContact now."
    $arrContact = $strContact.Split(' ')
    Write-Host
    Write-Host "$strContact has been split apart into individual array elements based on a space character. The elements are below:"
    $arrContact
    Write-Host
    Write-Host 'Start building filterName variable. Index of -1 gets the last element in the array.'
    $filterName = "$($arrContact[-1]), "
    $filterName
    Write-Host
    Write-Host "Loop through the remaining names in the contact. Need to process $($arrContact.Count-1) names."
    for ($i = 0 ; $i -lt $arrContact.Count - 1 ; $i++ ) {
    $filterName += "$($arrContact[$i]) "
    Write-Host "filterName variable is now $filterName"
    Write-Host
    Write-Host "Now we need to trim off the trailing space character."
    $filterName = $filterName.Trim()
    Write-Host "The final value of filterName is $filterName"
    Write-Host
    Write-Host 'Attempting to get the user object via Get-ADUser now:'
    Write-Host
    Get-ADUser -Filter "Name -eq '$filterName'"
    Write-Host 'End of loop.'
    Write-Host
    Don't retire TechNet! -
    (Don't give up yet - 12,575+ strong and growing)

Maybe you are looking for