What bit of "Please don't phone me" doesn't BT get...

What bit of "Please don't phone me" doesn't BT get?
 I have experienced a cataloge of corrosponce with BT dealing with the bad broadband speed issues that I have had on my connection since last november. Too long to list here see the link below
Terrible broadband speed
 Its fair to say that individual BT operators and advisors have been courtious and have tried to be helpfull most of the time but...BT have failed to find a long term fix for my issues.
The last month up until yesterday I was lucky enough to experience a wopping and reasonable steady 1.5 mbps...wow! Seriously it was fantasic! Compared to a miserable 0.3mbps or worse. I felt I was getting what I was paying for! Then the bill came in (and was wrong yet again!)! and coincidently? the speed returned to its former low!
 Without baffling the humble user with scientific terminology, it turns out the problem is caused by line noise - not of my own making! Well, I noticed that incoming calls on the landline telephone were knocking my broadband out, after a while I made the desision to dissconnect the phone because of the issues with calls knocking my speed down. I imformed as many of my familly and friends not to call me on my phone and use my cell instead. However I can't stop random incoming calls, which sends the blue lights on my hub to flickering orange. This in turn equates to the stupid adsl2 software that BT use, knocking down my profile and hence speed!
 When are BT going to get to grips with their stiffling system that takes up to ten days to recallibrate itself?
 Their old system used to work fine at this rural address, quickly reasserting itself if there was a line knockout or interference - which is common in rural locations. Now it seems in order for BT to advertise super fast speeds to most that can benefit from it who live within a couple miles of the exchange. The rest of us that don't, have to suffer for the sake of this new adsl2 system. Its a shambles and at times heartbreaking and BT still expect us to pay the same as anyone else!
 Dont be fooled. If you live in a rural location or more than two miles from the exchange, the chances are that if you are experiencing loss of BB speeds recently, whence before you had a reasonable service. Its down to the new BT adsl2 system they have brought in. Its not your fault, don't let the customer support advisors tell you otherwise! At least thats my experience!
 The new system is more sensitive to noise, true it may be marginally faster, but as it turns out at what cost?
 I have had a dozen engineers who have come round and each remarkably have "found and fixed the problem" then I get a reasonable speed for a few days before it drops again as of yet I have not had a pernament fix!
 The loss of speed issues have led to a series of 'knock on effects' including my wireless BB BT mobile going beserk leading to a £260.00 bill for one month!
#Being charged £40.00 for Broadband phone calls I did not make - I had to call in the police for the theft of phone calls made before BT would take me seriously - they said there was no record and that it was impossible to hack BT broadband phones! In the end they found a 'mistake' but it was a **bleep** of a fight to get them to admit that!
Even after that, they cut me off (for non payment of these calls) and are now trying to charge me a reconnection fee!
Also I am paying for an 'unlimited' broadband package and broadband anywhere - which is a complete joke because I am lucky if I can get broadband anywhere at all!I know I really need to sort this out - but there is no one dpartment it seems that can deal with it all
After my BT Broadband Anywhere phone freaked out (Down to issues related to my BT hub losing connections - I ended up asking BT Mobile to dissconect my gprs for fear of it happening again - even though I was paying for the 'unlimited 'gprs service) and the 'stolen' BB phone issues, I dissconected my wireless completely!
So NO BB on my BT mobile, on average I am lucky if I get a week a month on maybe 1mbps, the other three weeks on 0.3mpps on my home broadband.
 The trouble is that I am so sick and tired of being pushed from department to department and repeating myself on a weekly or even daily basis. I can never get one individual who can deal with all my problems in one go, #I am absolutely fatigued with it all.
Going somewhere else is not an option I am imformed where I live.
I have written letters to the customer service department and they have phoned me back and said things often at times when I am off-guard , so its hard to remember the details.
Now my policy is to have everything put in writing.
Despite using BT's 'contact us' form to report the latest speed issues and ticking the box that says
"respond by email" and stating "Please don't phone me" as well on my message body....I get a series of phone calls! Both on my mobile number and on my landline!
No comprehensible message returned as requested by email but phone calls from polite and friendly Indian help advisors...and guess what?   The calls the BT staff have made on my landline, has knocked my profile down even further!
Even though I headed my message with "Please do not phone me on my landline phone number"
How ignorant is that?
I have even asked for my landline calls to be diverted, but that costs £5.00 pm - I don't see why I should have to pay for this.
What I would like is for one BT person who can sort out All of these problems for me
(That'l be technical department, security department, billing department, sales department, customer service department and more and then back again - I hav'nt got the stomach or time for being pushed from pillar to post!)
- but from BT that is probablly asking too much!
I fell I have had so many problems with the BT Broadband service, with the time I have spent trying to get things sorted, BT should be paying me! And  they should take a good hard look at how their system works!
 Bt have a **bleep** cheek to charge me £150.00 per quarter for all this!
My father pays £96.00 for this same service, gets 8.00mbpsm, can use his landline and hubphone, can use his wireless, plus BT vision as well - How fair is this?
I think its time for Ofcom

It would be Otello and not Ofcom but in my experience they are very much in the pocket of BT (not least since they are funded by the telcom companies).
I suggest you try contacting the mods here and see if they can help
If my post was helpful then please click on the Ratings star on the left-hand side If the the reply answers your question fully then please select ’Mark as Accepted Solution’

Similar Messages

  • OBIEE 11.1.1.5 configuration failing on 64 bit Linux(please don't delete)

    Please DONOT delete this thread. I see someone keeps trying to do it don't know why. The last two threads on the same topic were
    https://forums.oracle.com/forums/thread.jspa?messageID=10473944#10473944
    and
    https://forums.oracle.com/forums/messageview.jspa?messageID=10467383&stqc=true
    OBIEE 11.1.1.5 Software only install configuration failing on 64 bit Linux
    My scenario is installing in 64 bit Linux with WLS 10.3.5 (with SOA/BAM server installed already). So as recommend by Oracle (http://docs.oracle.com/cd/E21764_01/bi.1111/e10539/a1_installscrn.htm) I did a software only install and then tried to configure BI using config.sh. I didn’t have root privilege, so continued with local inventory, hope that wasn't an issue.
    1) First time it failed in 'Configure BI Domain' step. I aborted and retried. It failed saying there is already entry in HSS Component table. I fixed the issue and tried again
    2) Then it failed again in 'Configure BI Domain' step, the error stack is
    Executing Task: Configure BI Domain
    javax.management.InstanceNotFoundException: oracle.biee.admin:group=Service,type=BIDomain
    at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:234)
    at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:223)
    at javax.management.remote.rmi.RMIConnectionImpl_1035_WLStub.invoke(Unknown Source)
    at weblogic.management.remote.common.RMIConnectionWrapper$16.run(ClientProviderBase.java:919)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
    at weblogic.security.Security.runAs(Security.java:61)
    at weblogic.management.remote.common.RMIConnectionWrapper.invoke(ClientProviderBase.java:917)
    at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:993)
    at oracle.as.install.bi.biconfig.standard.BIDomainConfigureTask.doExecute(BIDomainConfigureTask.java:58)
    at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
    at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
    at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:112)
    at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
    at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
    at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
    at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
    at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
    at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
    at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
    at java.lang.Thread.run(Thread.java:662)
    Caused by: javax.management.InstanceNotFoundException: oracle.biee.admin:group=Service,type=BIDomain
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getMBean(DefaultMBeanServerInterceptor.java:1094)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getClassLoaderFor(DefaultMBeanServerInterceptor.java:1438)
    at com.sun.jmx.mbeanserver.JmxMBeanServer.getClassLoaderFor(JmxMBeanServer.java:1276)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$1.run(WLSMBeanServerInterceptorBase.java:58)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getClassLoaderFor(WLSMBeanServerInterceptorBase.java:53)
    at weblogic.management.mbeanservers.domainruntime.internal.FederatedMBeanServerInterceptor.getClassLoaderFor(FederatedMBeanServerInterceptor.java:141)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$1.run(WLSMBeanServerInterceptorBase.java:56)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getClassLoaderFor(WLSMBeanServerInterceptorBase.java:53)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$1.run(WLSMBeanServerInterceptorBase.java:56)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getClassLoaderFor(WLSMBeanServerInterceptorBase.java:53)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$1.run(WLSMBeanServerInterceptorBase.java:56)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getClassLoaderFor(WLSMBeanServerInterceptorBase.java:53)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServer.getClassLoaderFor(WLSMBeanServer.java:527)
    at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$19.run(JMXConnectorSubjectForwarder.java:1014)
    at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$19.run(JMXConnectorSubjectForwarder.java:1012)
    at java.security.AccessController.doPrivileged(Native Method)
    at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.getClassLoaderFor(JMXConnectorSubjectForwarder.java:1012)
    at javax.management.remote.rmi.RMIConnectionImpl$5.run(RMIConnectionImpl.java:1326)
    at java.security.AccessController.doPrivileged(Native Method)
    at javax.management.remote.rmi.RMIConnectionImpl.getClassLoaderFor(RMIConnectionImpl.java:1323)
    at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:771)
    at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
    at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
    at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
    at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
    at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Does this option actually work?? Can someone help please

    Has someone ever got it to work? Is there any resolution to the problem described

  • I just got my iMac and would like to sync my iPhone to it. It says its linked to another library. It asks to delete contents before syncing. I don't want to lose what I've bought on the phone. How do I get around this?

    Help? Suggestions.

    Transfer your iTunes library from your old computer to your new computer along with all other important data that you will need or want to access on your new computer such as documents, photos, etc.
    Follow the instructions included with this link for transferring your iTunes library from your old computer to your new computer.
    http://support.apple.com/kb/HT1751

  • I don't know what I did but my whole phone book is empty. ?

    I don't know what I did but my whole phone book is empty. ?

    Hi. I'm new to the iPhone, but I have had iPods for 5 years or so. I don't know if it works the same, but here's what I know from my iPod experience.
    Each iPod is associated with a particular iTunes account. If you plug your device into your computer, it should see your iTunes account and do what ever you have set your iTunes to do when it sees your device (mine is set to sync automatically). If you plug into a different computer, it asks if you want to sync to that iTunes, and if you say yes, it will replace your content with what is in the other iTunes account.
    Still, you say it was your own computer that did this to you, so I'm a bit stumped. It sounds like when you had the iPhone 4 you had different content than when you got your iPhone 5. What was the difference? Songs, contacts, photos, apps, etc.? Do you still have the content of your iPhone 5 on your computer? I have only managed my iPhone with my computer, with the exception of downloading a few apps directly, but those apps get placed on my computer when I sync, so I was under the impression that other things that go directly to your phone would also sync, but maybe that's wrong on my part.
    You might want to open iTunes on your computer and go to Store>View My Account to make sure you have the correct log-in. Could it be that you made a new Apple ID with the new phone, and your computer is still logged in with your old one?
    Please post back if you find a solution, or if you have any new info.

  • TS1363 when i connect my phone itunes says it does not recognise my phone and need to update itunes to 64 bit. i have done this but still keeps coming back up!!!!!!!!!!!!!!!!

    when i try to connect my phone to itunes a message comes up saying it does not recognise it and must upgrade itunes to 64 bit i have done this numerous times but stillwill not recognise my phone.!!!!!!!!!!!!!

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • TS4062 hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit,  the computer recognizes the phone but itunes sais i need 64 bit itunes.... please is there something im missing...

    hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit,  the computer recognizes the phone but itunes sais i need 64 bit itunes. please is there something im missing... thanks

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • Ok I bought my iPhone 4S 5 months ago and these recent weeks I have had problems with the battery dying at 50% like completely shutting off meanwhile it has 50% battery I don't know what to do please help

    Ok I bought my iPhone 4S 5 months ago and these recent weeks I have had problems with the battery dying at 50% like completely shutting off meanwhile it has 50% battery I don't know what to do please help

    I couldn't find the edit button on my original post so I am posting an update here.
    I have gone through more apps and have had good luck on all but one more.  And it's not that the app doesn't work, I am talking about the Yahoo Weather app, It works fine, but when you swipe between cities the screen lags a bit and it sometimes doesn't move between pages the way it should.  On iOS 7.1.2 it was smooth as butter but on iOS 8.0, not so much.  I will post a note in the app store to let them know.  I really like the Yahoo app better than the new stock app.
    I have been going through my games and they all work fine. Angry Birds (Original and Stella), Canabalt, Minecraft, Bejeweled 2, Silly Walks, PopWords, Doodle Jump, Deep Green all seem to work just fine. 
    Starbucks app works as it should. 
    I will stop back again next week after I have had the weekend to play with it in detail and post my thoughts again.

  • I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone?

    I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone? (the check marks are not bolded, does this mean they are not in my library but only on my phone?)

    You uncheck the music in your iTunes library on your computer and along with sync only checked songs and videos selected under the Summary selection for your iPhone sync preferences with iTunes, only checked songs in your iTunes library will be transferred to your iPhone or remain on your iPhone and the unchecked songs in your iTunes library that are currently on your iPhone will be removed when syncing.
    Or make use of iTunes playlists and choose selected playlists, albums, artists under the Music selection for your iPhone sync preferences with iTunes and select the playlists below that you want transferred to your iPhone.

  • I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

    I am having problems with creating my apple id. On the phone it is advising me that the ID is not created and then when i do it online it says that it has been created. Can you advise me on what to do please?

    Apple ID FAQ   http://support.apple.com/kb/HE37

  • Hi, We have an application  built using HTMl 5 and Javascript running on IPad2, iOS5.1 Safari 5.1. When we try to download a file(.pvw file) in that application safari throws "Download failed" error. Please suggest what needs to be done.

    Hi,
    We have an application  built using HTMl 5 and Javascript running on IPad2, iOS5.1 Safari 5.1.
    When a file url is clicked instead of asking for Save or Open or Cancel options, the file gets opened on IPad by default.
    Is this default behaviour which cannot be changed or can it be configured to ask user preference?
    When we try to download a file(.pvw file -> a model file) in the above application, safari throws "Download failed" error.
    Please suggest what needs to be done.
    Regards,
    Pramod

    Safari on an iPad in general does not allow downloading of files. That's a safety precaution in the iOS SDK to keep unauthorized content off of iOS devices. Safari will open from the web site file types that it can handle, but direct downloading isn't normal behavior, and I don't believe the behavior can be changed, though you can try asking in the developer forum, either here or the one to which you have access as a member of Apple's iOS developer program.
    Regards.

  • HT201269 I recently aquired a new iphone 4s because my old one broke. I backed it up on my itunes but now it wont give me the option of using the phone, it just says connect to itunes. I have synced it several times now and dont know what to do, please he

    I recently aquired a new iphone 4s because my old one broke. I backed it up on my itunes but now it wont give me the option of using the phone, it just says connect to itunes. I have synced it several times now and dont know what to do, please help me!!

    I recently created a new apple ID
    Bad idea.
    Content bought with an Apple ID is forever associated with that Apple ID. Apple will not transfer content from one Apple ID to another and Apple will not merge Apple IDs. Unless you are prepared to forfeit all the previously purchased content and buy it all again with the new Apple ID, you will need to maintain the old ID to update and redownload your content.

  • HT1414 i wanted to reset my iphone from the phone settings and i started with no problem but now my i phone got stuck i can only see the apple logo  and my phone does not start what to do please help

    i wanted to reset my iphone 4 from the phone settings and everything started okay until i realised it was not working at all now my phone is tuck with the apple logo and won't start can not connect to the itunes store as well what to do please help

    Place your iPhone into recovery mode as described here.  You may have to try to enter recovery mode more than once to succeed.
    http://support.apple.com/kb/HT1808

  • TS3274 Hi I am using iPad 2, when I tap app icon on the screen it shakes and does not open the app please advice what need to be done

    Hi I am using iPad 2, when I tap app icon on the screen it shakes and does not open the app please advice what need to be done

    - First try clciking the Home button one and try again.
    - Next reset the iPod. Nothing is lost
    Reset iPad: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Then restore from backup
    - Restore to factory defaults/new iPod

  • Early this morning from my way to office when I plug my iPhone 3gs to my itrip in my car it is working fine. But when somebody called in my iPhone it suddenly turn off, and I can not turn it on again. I really don't know what to do, please help me?

    Early this morning from my way to office when I plug my iPhone 3gs to my itrip in my car it is working fine. But when somebody called in my iPhone it suddenly turn off, and I can not turn it on again. I really don’t know what to do, please help me?

    Early this morning from my way to office when I plug my iPhone 3gs to my itrip in my car it is working fine. But when somebody called in my iPhone it suddenly turn off, and I can not turn it on again. I really don’t know what to do, please help me?

  • When trying to save it says don't have enough access privileges. what that mean please and how to remedy?

    when trying to save it says don't have enough access privileges. what that mean please and how to remedy?

    It means just that.
    You don't have privilege to write to your harddisk
    Check your user account.
    Which system is it?
    Which version of Illustrator?

Maybe you are looking for