What BP Role is used for Loans Management in ECC6?

Hi guys,
Can someone help with the BP role to use for Loans Management in ECC6? The system shows that the old role TR0100 is now obsolete, so in ECC6, what is the role name for FS-CML? Is it FS0000 or something else?
Any documentation on Loans Management in ECC6 will help.
Regards
Fisayo.

Hi,
You have to use BP Role TR0100 only. Please check which BP Role Category is assigned to BP Rle TR0100 in spro. There is no change in ECC6 as well. The role name should be "Main Loan Partner"
Regards
Prasad AV

Similar Messages

  • Could you please tell what is encryption mechanism used in Release Management for storing any password

    Could you please tell what is encryption mechanism  used in Release Management for storing any password

    Hi  y e ll e sh,
    I am trying to involve someone to further look at your question. There might be some time delay. You can also check replies for the similar question in this
    thread. Appreciate your patience and thanks for your understanding.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • What is better to use for CTM: PDS or PPM?

    what is better to use for CTM: PDS or PPM?
    what is easier to manage and use in CTM : PDS or PPM? and why?thanks
    elena

    Hi ,
    In CTM I will recommend  PDS over PPM.
    You can directly CIF PDS as SNP PDS from ECC, you do not have to convert from PPDS to SNP unilke PPM.
    PDS supports VC, Phantom assemblies.
    PDS can be maintained in ECC and change transfer is easy.
    Validity period of components can be specified in the PDS , Which is not possible in PPM.
    SAP is developing PDS for future use compared to PPM.
    Regards,
    Pavan Verma

  • Error in extracting records for Loan Management

    Hi
    I am trying to extract records for Loan Management(CFM and CML), but I
    am getting Error .
    During the extraction phase an error occurred for the extractor. An exception, 'error_passed_to_mess_handler' was triggered.
    Following are the extractors I am trying
    0CFM_INIT_POSITIONS
    0CFM_DELTA_POSITIONS
    0CML_CASHFLOW
    0CML_INIT_BUDAT
    0CML_INIT_DFAEL
    0CML_DELTA_CAP
    We faced similar problem in Development then change the settings like in customization
    " Define InfoSources for Position Initialization " inside BW/CML
    customizing. changed the date there to 31.12.2006
    and activated the change pointers and transported the chages to R/3
    Production ,
    but in production it is not working
    Pl let me know If some additional settings are required

    Hi,
    if you run the extractors in the cml-system via rsa3, check out the log. What is the exact message? Is it just tho one you already gave or is there some more information? If you run them in cml, don't forget to specify the target system.
    regards
    Siggi

  • My Time Capsule won't allow my computer to back up.  It says it is already in use but that is what it is being used for.

    My Time Capsule won't allow my computer to back up.  It says it is already in use but that is what it is being used for. It has been working fine for years.  All of a sudden I keep getting a message that TC (time capsule) cannot complete back up as it is already in use.  I am doing the backups automatically through Time Capsule.

    Restart the Time Capsule by disconnecting and reconnecting the power adapter. When it's back online, open the AirPort Utility application and check to see whether there's a firmware update for it.

  • How to find out what are the interfaces used for Job and Job Codes

    HI All,
    I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
    Thanks In Advance
    Sunny

    Hi,
    Here is an idea for your request.
    Basically you can create a simple query on multiprovider 0TCT_MC01.
    Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
    Choose following characters into your objects:
    InfoProvider ( 0TCTIFPROV )  - you can create a variable for choosing infoprovider before query runs.
    *Tp.[Type of BI Application Object] 0TCTBISOTYP  = filter this with 'QUERY' or whatever your need is.
    *BI Application Object 0TCTBISBOBJ,  ( this will give you the name of the queries)
    In key figures choose,  Count for BI Appl. (0TCTWTCOUNT).
    (number for query run)
    Create a condition , for top 20.
    Hope this helps.
    Derya

  • What are the classes used for bropdownListBox in BSP and purpose and how

    what are the classes used for bropdownListBox in BSP and purpose and how
    thank you,
    Regards.
    Jagrut BharatKumar Shukla

    Benje001,
    Right-click on the CWAI control on your form. Choose Properties. The first tab is the Channels tab. After you choose your device from the drop down box on the right, you can type in the Channels box which channel you want to use.
    If you want to see a CWAI control that is already configured, all of the shipping examples will have this already done.
    Also, if you have questions about any item on the CWAI (or any other NI ActiveX control) you can click the ? icon in the right corner of the properties page and then click on the item in the dialog that you need help with. This "What's this" help will describe that particular control on the dialog.
    Hope that helps!
    Regards,
    Shannon R.
    Applications Engineer
    National Instruments

  • What format i should use for my external hard drive that can be used interchangeably between mac and pc?

    What format i should use for my external hard drive that can be used interchangeably between mac and pc?

    Usually Fat32/MS-DOS as mentioned, but that has several limitatiuns, like 4GB filesize limit.
    One option is MacDrive for you PCs... allows them to Read/Write HFS+...
    http://www.mediafour.com/products/macdrive/
    More options...
    NTFS-3G Stable Read/Write Driver...
    http://www.ntfs-3g.org/
    MacFUSE: Full Read-Write NTFS for Mac OS X, Among Others...
    http://www.osnews.com/story/16930

  • What format do I use for internal drive?

    I want to install a new internal harddrive into my Macbook.  What format should I use for it?
    Mac OS Extended (Journaled)
    Mac OS Extended
    Mac OS Extended (Case-sensitive, Journaled)
    Mac OS Extended (Case-sensitive)
    MS-DOS (FAT)
    ExFAT
    I know MS-DOS(FAT) is what I should use for external to work on mac and windows.  Can't remember which to use for the internal.  I have an Intel-based Mac.
    Thanks for your help.

    I use SuperDuper for cloning my OSX volumes and it does not change the size of the destination partition to the size of the source partition.
    So, you can make the destination partitions size to your liking and the cloning will not change it afterwards.
    Keep in mind that SuperDuper or Carbon Copy Cloner cannot clone a BootCamp Windows partition to a new harddisk, only OSX partitions.
    But Parallels doesn't need to have a Windows partitions but is mostly just two files plus the Parallels app on your OSX partition.
    And therefor it would be cloned with the rest of the OSX.
    Stefan

  • What setting should I use for Abbey Road drums?  Getting a cpu overload issue

    What setting should I use for Abbey Road drums (i.e. multi-output, stereo, etc)?  Getting a cpu overload issue.  I have a macbook pro, 4 gb ram, running Logic Pro 9.  Just 3 tracks of drums and a few real instrument tracks.  Can't find a guide in the manual for either Kontakt or Logic.  Thanks in advance!

    Hi
    AR drums are complete resource (CPU) hogs. They work better if you turn off as many of the AR internal plugins as you can.
    See section 4 (?) of the AR manual, which you can find within Kontakt (In the library area of Kontakt click hold the small "i" on the right of the "AR drummer" Library).
    Alternatively, your only solution is to increase the I/O buffer in Preferences:Audio, with the associated increase in latency
    CCT

  • What is the method used for upload of  data

    Hi All,
    What is the method used for upload of  Data from excel spread sheets to SAP HR.
    it is Bulk Data from many countries.LSMW or BDC Session Method?
    what are country specific infotypes used for PA and OM.
    can u plz give the list of country specific infotypes used for PA n OM Module.
    Thanks
    Archana

    Hi Archana,
    To Upload bulk data I think BDC is the best and effecient way.
    Regarding Infotypes we dont have any country specific Infotypes in OM & PA. In Payroll we do have according to country wise.
    I hope you had understood the point
    Regards
    Pavani
    Remainder: Points to be given on answers

  • What are the tables used for this Report

    hi all..
    i am a fresher for ABAP. i need the help.
    what r the tables used for this report.
    Reports provide pending order details according to Material wise and customer wise for particular month.
    thanks in advance
    RK.Ashokkumar.
    9994262112.

    hi
    good
    try with these tables,
    MARA
    KNA1
    thanks
    mrutyun^

  • What Metadata Standard is used for Face Regions?

    Nice to see that LR6 now has support for Face Recognition and Face Regions. However, nowhere in the online help is it stated explicitly what metadata standards are used for the image regions.
    I would hope that as Adobe is a member of the Metadata Working Group, then LR6 is using the metadata standard specified by the MWG for image regions.

    It's the MWG.
    Within Lightroom itself, the face regions are recorded inside the catalogue and this data is associated with keywords.
    When you export a photo, unchecking the option Remove Person Info, the names are also written to the IPTC Extension Person Shown and the MWG Regions too.
    I suggest you export a photo as above and examine its metadata in the Advanced tab of Bridge's FIle Info dialog box, or in some other metadata tool.

  • What data type is used for storing password,

    What data type is used for storing pass word in oracle db, i mean if user inputs some thing from forms it should be in Encrypted form in db, please any help??
    Thank you
    Hina

    Data type is VARCHAR2:
    SQL> desc dba_users;
    Name                                      Null?    Type
    USERNAME                                  NOT NULL VARCHAR2(30)
    USER_ID                                   NOT NULL NUMBER
    PASSWORD                                           VARCHAR2(30)
    ACCOUNT_STATUS                            NOT NULL VARCHAR2(32)
    LOCK_DATE                                          DATE
    EXPIRY_DATE                                        DATE
    DEFAULT_TABLESPACE                        NOT NULL VARCHAR2(30)
    TEMPORARY_TABLESPACE                      NOT NULL VARCHAR2(30)
    CREATED                                   NOT NULL DATE
    PROFILE                                   NOT NULL VARCHAR2(30)
    INITIAL_RSRC_CONSUMER_GROUP                        VARCHAR2(30)
    EXTERNAL_NAME                                      VARCHAR2(4000)
    PASSWORD_VERSIONS                                  VARCHAR2(8)
    EDITIONS_ENABLED                                   VARCHAR2(1)
    AUTHENTICATION_TYPE                                VARCHAR2(8)You can use SQL function ORA_HASH to hash password: http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/functions124.htm#SQLRF06313.

  • In itunes, my ipod shows six gigabytes of "other" and i have no idea what that space is used for.

    In itunes, my ipod shows six gigabytes of "other" and i have no idea what that space is used for.

    Other usually contains app data and other miscellanious items. However 6GB is awfully big so it's likely been corrupted. I would restore.

Maybe you are looking for

  • How do I get more memory on my IMAC .I have 1 GIG and to run LION you need 2 GIGS?

    How do I get more memory on my IMAC .I have 1 GIG and to run LION you need 2 GIGS?

  • A/R Invoice and Tax Setup

    Whenever i am creating a new invoice its throwing error - "The value for the attribute Rate is not available". Although the the rate for tax code VAT 4 or VAT 12 is available and being displayed in the tax code selection box.

  • CS4 project into CS5?

    Will a CS4 project open in CS5 (Maybe you could do a test on this Harm if you have time.) I would like to know so I can plan project migration to a new system. Answer would be good for the CS5 FAQ sub forum

  • How can I remove a line from Familybase?

    I want to remove my wife's ipad from Verizon Familybase, but I can;t figure out how to do it.  Does anyone know how?

  • Add font for virtualized Office 2013

    Hi, I need to add a font for Office 2013. Usually, a font should be added to Windows\Fonts. I believe it should work for virtual Apps too? Can we do it on package level? Thanks. --- When you hit a wrong note its the next note that makes it good or ba