What buffer do the "non-record enabled" tracks play at in Logic?

Hey Guys,
So, we all know the genius of Logic is that it only uses the user-chosen buffer for tracks that are recording or armed, and it runs the playback tracks at a much higher buffer to free up processing power for the real-time tracks...
Out of interest, does anyone know what buffer it uses for playback tracks? (I think it might be 1024 samples but can't be sure)...
It puzzles me that all other DAWs have a buffer that applies to all tracks, playback and record. No wonder they can't even come close to Logic when it comes to low latency virtual instruments!
Interested to hear people's thoughts!
Cheers,
Mike

JohnL23
Thanks for the update.
There are several Adobe Premiere Elements Forum threads about situation such as the one that you have encountered. Typically they are the results of some heavy activity in the narration track. Some have found success in maneuvers between the Expert and Quick workspaces in versions 11 and 12 or Timeline and Sceneline workspaces in versions earlier than 11. That is why I mentioned that type of factor in a prior post in your thread.
If that is not working, then we are forced into the new project where the problems in the current project are not presenting.
I will do a search for the threads that I am recalling about your type of issue. But, right now all roads seem to head to the new project. But I would ask "Can you salvage this project by creating your narration clips in Audacity or a new Premiere Elements project and import them into this project, putting the clips on one of the numbered audio tracks?"
If the problem should reappear in the new project, please let us know including the details of what was going on immediate before the problem surfaced.
Thanks.
ATR

Similar Messages

I am getting an Narration error that I can't record because one of the record-enabled tracks is locked in the timeline. What does this mean and how do I get out of it??

I am getting an Narration error that I can't record because one of the record-enabled tracks is locked in the timeline. What does this mean and how do I get out of it??

JohnL23
Thanks for the update.
There are several Adobe Premiere Elements Forum threads about situation such as the one that you have encountered. Typically they are the results of some heavy activity in the narration track. Some have found success in maneuvers between the Expert and Quick workspaces in versions 11 and 12 or Timeline and Sceneline workspaces in versions earlier than 11. That is why I mentioned that type of factor in a prior post in your thread.
If that is not working, then we are forced into the new project where the problems in the current project are not presenting.
I will do a search for the threads that I am recalling about your type of issue. But, right now all roads seem to head to the new project. But I would ask "Can you salvage this project by creating your narration clips in Audacity or a new Premiere Elements project and import them into this project, putting the clips on one of the numbered audio tracks?"
If the problem should reappear in the new project, please let us know including the details of what was going on immediate before the problem surfaced.
Thanks.
ATR

No sound on record enabled track

When I record enable an audio track the sound is ok, but if I push the play button then the sound on the record enabled track is muted. There is still input on the channel. If I try to record the tarck the sound is ok and even if I press the play button and then record enable the track the sound is ok. Any solutions?
I'm on logic pro 9.1.3 and I'm using RME fireface 800

jaahaa wrote:
When I record enable an audio track the sound is ok, but if I push the play button then the sound on the record enabled track is muted. There is still input on the channel. If I try to record the tarck the sound is ok and even if I press the play button and then record enable the track the sound is ok. Any solutions?
I'm on logic pro 9.1.3 and I'm using RME fireface 800
Hi,
You need to push the "I" button on the channel strip.
This is the "INPUT" monitoring button.
If it is yellow, you will hear the live input all the time, including when playing back without recording.
You will however no longer listen to any pre-recorded audio on that track.
Cheers

Everything is updated!! iPhone, iPad, iTunes and MacBook Pro... All I am trying to do is drag content from my iTunes Library to the devices. iTunes gets stuck EVERY single time! What usually triggers the Non-Sense is when I am adding a 2nd file!

Everything is updated!! iPhone, iPad, iTunes and MacBook Pro... All I am trying to do is drag content from my iTunes Library to the devices. iTunes gets stuck EVERY single time! What usually triggers the Non-Sense is when I am adding a 2nd file!
Why does iTunes SUCK??
1) Many items greyed out in the menu bar, for well over 2 years, maybe more!
2) I Can't drag more than one piece of content from your iTunes library to any device (iPhone, iPad)
If you do it gets stuck for HOURS and HOURS in "Preparing To Update" and the little activity circle never completes, ever!!
I used to be able to drag over 1000 tunes, movies, etc. go have breakfast come back and it would all be on my device!!
Can't do it anymore, one song at a time, maybe an album at a time, or one movie, and that is it!!
If you do a 2nd item the other items stop loading and never continue!!
This is so BAD, I don't understand how they don't have this fixed yet!!
Please tell me I am not the only one!!
...and If I am tell me how to fix it!
Very appreciated,
Joe

Everything is updated!! iPhone, iPad, iTunes and MacBook Pro... All I am trying to do is drag content from my iTunes Library to the devices. iTunes gets stuck EVERY single time! What usually triggers the Non-Sense is when I am adding a 2nd file!
Why does iTunes SUCK??
1) Many items greyed out in the menu bar, for well over 2 years, maybe more!
2) I Can't drag more than one piece of content from your iTunes library to any device (iPhone, iPad)
If you do it gets stuck for HOURS and HOURS in "Preparing To Update" and the little activity circle never completes, ever!!
I used to be able to drag over 1000 tunes, movies, etc. go have breakfast come back and it would all be on my device!!
Can't do it anymore, one song at a time, maybe an album at a time, or one movie, and that is it!!
If you do a 2nd item the other items stop loading and never continue!!
This is so BAD, I don't understand how they don't have this fixed yet!!
Please tell me I am not the only one!!
...and If I am tell me how to fix it!
Very appreciated,
Joe

What's with the non-existant free trial download for Photoshop?

What's with the non-existant free trial download for Photoshop? You click on "Download free trial" and it takes you to a page that takes you to a forum… nothing happens. I've done this about 6 times on two browsers. Of course, there's no help from Adobe, so I'm trying this forum. Thanks!

Thanks very much for a prompt reply! Much appreciated. Unfortunately, that's exactly the page I was on. And I used both Firefox and Safari and got the same page, with the same nothing...
As this forum doesn't allow attachments, I'll cut and paste the page here (there's not much):
Keep learning
Whether you're new or a pro, we're always making Photoshop better.
Learn more with these tutorials.
Get support
Have any questions? Visit the Learn & Support area for help.
That's all that's on the page. No buttons, URLs, menus… nothing. And just to confirm, the URL is as you gave: https://creative.adobe.com/products/download/photoshop
Something's fishy...

I can only hear my record enabled track when recording,not when just playing

This has to be a simple one - normally I can hear my record enabled track when playing back or recording but suddenly i can only hear it when I am actually recording. I must have accidentally selected an option i am unaware of - can someone please help!
Thanks

In case anyone is also stuck I went to Options->Audio where there is an Auto Input Monitoring option. I turned it off and it fixed my issue.

Enable Mic Monitoring ONLY During Recording or Record-Enable Tracks

Is there any way to monitor the mic inputs only when you're recording? I know that you can disable the output of the mic to the speakers (or enable if you want), but is there any way to automatically do this only when you've record-enabled a track in a program such as Sonar or Adobe Audition? Thanks for the feedback!

which card you got ? and are you asking how to eliminate the feedback? well on my cards (x-fi and audigy 2, and li've 5.) i think you can do it with the bundled recorder that you get when you download the drivers from this site. I think creative recorder is the best one. Also creative mediasource should work (if you dont have Creative Recorder) just select recording source (which is your mic) In my opinion it does just as good of job as AA .5 (which I also own and use alot). I also believe I might have seen that option in AA, but it could be risky as it may interfere or conflict with your device. Only on my x-fi card have i noticed that it autmatically mutes the speakers while recording from mic (during Audio Creation Mode---I select Mic and select Monitor on Recording only) . Only other quick fix to it is simply press the mute key or my personal favorite use some earphones (not headphones cuz youll still get a little feedback at high volumes).Message Edited by djbonus on 06-07-2006 08: PM

New iPod Nano Turns off in the middle of any track playing - Apple Bummer

So, I just received my iPod Nano as a replacement to an early generation of iPod Nano's that are subject to recall. The new Nano has been updated as of 21 Jan 2012. Songs loaded into iTunes under MAC OS X Lion, iPod Nano synched with my computer, and I'm ready to go.
What - not so fast! Guess what? The Nano turns itself off in the middle of any track you play. I turned the shake and shuffle mode off to make sure that is not it. And it is fully charged. I even went through the reset procedures.
So its less than 24 hours new/old so I go for Apple support. My original iTunes etc accounts are associated with my house in America. But I live in the UK right now. So drill through Apple support and guess what? Well, I live in London so no support is available. And the Apple web site as usual does not provide much help in making calls.
Apple's web site says there is no coverage on this as it is out of warranty? 24 hours new? No warranty. It says it comes with a one year warranty. And Apple UPS'd it to me yesterday.
So question 1 is: Does anybody know what the problem is and how to fix it? I hope it isn't operator head space but who knows, maybe it is.
And question 2: Does anybody have a good 800 number for me to call in the USA?
Many thanks.

Livin Doll wrote:
I have the same problem and wondered if it was loosey goosey headphones which were just cheap 10 dollars buds. So are you saying I should get new ear phones that fit tighter?
That would be my guess....Here is what Apple has to say about the problem.
http://support.apple.com/kb/ts3700
My guess is that it is a compatibility problem with older or aftermarket ear buds. My daughter has a 6th generation Nano and does not have this problem but keep in mind she is using the ear buds that came with the 6th Generation Nano. With the replacement program they are not sending new ear buds. I just did a test with my daughters 6th Generation Nano using an old set of aftermarket ear buds I had in my desk and I was able to duplicate your issue. I then used the ear buds from my Iphone 4s and did not have an issue with the Nano going to sleep and the music turning off.

Does not get to the internet,cannot close it or open it...installed the non record sites visited..has not worked since

Firefox does not open at all...cannot close it either to reinstall.........cannot get to the net with firefox....all this happened when I installed the private browsing app from firefox......since then I removed a Trojan virus......but firefox still does not work

If Firefox is still running in memory, you can terminate it using the Windows Task Manager. Press Ctrl+Shift+Esc. The Applications tab generally lists visible windows, so usually Firefox won't be listed there when you have this problem, but check that first anyway. The processes tab is where you may find firefox.exe. To shut it down, you can highlight that line and click End Process.

Record enable single track only...

this is a question i've been meaning to ask since L9! when i select a track to record to, and then go to another track, the original often is still in record-enable mode.how do i make it so that ONLY one track (the one i currently select) is the ONLY record-enabled track?
am sure i'm missing something obvious...

Ok here is a bit more info. I have not been home to investigate your possible soulutions but this may help. I am recording a a highlighted time frame of approximately 15 seconds. If i let the record go past the end of the highlighted region it starts over, doesnt stop, and keeps recording where the highlighted region begins. If i don't stop the cursor before the end of the highlighted region, the next time I record, the record enable on the track below it will be locked with it. Ive let it go over four times accidently so now there is a total of four tracks, all in order below the track that i want to record on, that are grooped. Booo....

Turning on "record-enabled" audio track in premiere pro 5.5.

I'm trying to do a simple voice-over in premiere pro 5.5. I've followed all the instructions given in the tutorials yet I keep getting a prompt saying " You can't record because one of your record-enabled tracks is turned off? I know i'm missing something simple but can't seem to determine what it could be. Does anyone know what it might be?

I think this might help the discussion. I also have auto input monitoring selected. I can also hear the audio when I click the input monitoring button.

Record Enable on Multiple Midi Channels

Longtime Logic user here.
First of all, I have never really understood certain parts of record enabling midi channels. Sometimes, I will be switching between midi channels to record a new instrument, and the old midi channel will stay Record Enabled, and sometimes it doesn't.
Sometimes, when two midi channels are record enabled, one of them will have a grey "R" with a little red R instead of the normally full red "R". (I know, it's confusing)
And sometimes when you choose an Aux track that is linked to a Midi channel with multiple outputs, it acts like it is Record Enabled. This means, you have an Aux track selected, but you can play a midi instrument, like a different instrument is selected.
These were always part of Logic, for as long as I used them, and I just learned to deal with them without thinking too much about why one thing happens.
With Logic Pro X, I just found a bug that makes these other things matter.
I was working on an Aux track for a multi-output midi instrument.
Then I clicked onto a different midi instrument, to begin recording onto it. What happened was the Aux track was still "Record Enabled" even though there is no "R" button on an Aux track. So, when I hit the keyboard, two different midi channels were playing, even though one of them was an Aux track without a record enabled button.
I was able to clear it, by selecting a different midi channel, and clicking around until there was only one midi channel playing. But at this point, Logic's weird programming is starting to be an issue that I wish they would address.

Mate, i'm so sorry - Between LP9 and LPX i was using Ableton and i think i've confused myself, just spent 10 minutes looking for the option in Logic as i could see the option in my head when replying.
However, it was in Ableton.
It's Logic's characteristic i guess? I've had a few oddities record-enabling tracks but have put it down to being a new release, things like enabling and not actually hearing any notes, clicking the R on/off and suddenly it's ok.
My problem has always been with Logic, i have this OCD-like nature where i click away from a track after making a change, and it STILL catches me out as i go to record an track above gets overwritten if i'm looking away - So totally understand your frustrations.
Not sure why it has to be fixed like that really, must be some deep rooted reason like it would blow up if there were no track record-enabled and you pressed the record button maybe?

Option missing for the iPod to enable or disable the album artwork.

I have a 5th Gen iPod and iTunes 10.5.1. I did a restored on the iPod to try and solve a locking up/freezing problem.
After the restire none of my album artwork got included in the restore. Additionally I don't have the option for the iPod to enable or disable the album artwork.
I plug in the iPod and select that iPod then select Music. No matter what options I choose (Sync all of Library, Sync Playlists, etc.) I don't have the option to enable album artwork.
Has anyone else seen this issue?
I also have a second 5th gen (but bigger) iPod and older Nano, iPhone and iPad and this option does not show up for any of these devices however, all of those show the artwork.
What happened to the option to enable or disable artwork and how do I get my artwork back on my iPod?

That option was removed as of iTunes version 9. Somebody else recently had this issue with a similar model iPod and came to discover that the HD was simply going bad.
B-rock

Option to NOT auto Record Enable?

Have searched GB Help, the GB PDF, and this forum, but not finding the answer (which means I'm probably just not searching correctly). In any case...
Is there an option or preference in GarageBand to NOT activate the record enable button when selecting a "Real Instrument"/audio track?
I find myself doing a fair bit of extra clicking (to turn that little red button off) when I'm listening to different tracks in-between recording new ones, and I don't want the room tone or any random sounds being heard by the live mic added to the track playback to which I'm trying to listen. Since I'm frequently going back and forth between listening to various tracks and then recording new ones, I'd prefer to leave the mic connected and the record level where I've set it -- it would just be nice if I could disable that automatic Record Enable feature. But is there any way to do that?
Thanks,
John Bertram
Toronto

Dang.
It's always ironic (and a bit annoying) when a feature that's been implemented as a convenience (most of the time), can never be turned off, even in those situations where it actually becomes inconvenient, and the user is forced to do more work instead of less.
And you'd think this would be a relatively easy preference to include as an On or Off checkbox, perhaps under the "Advanced" tab. (There should also be some sort of keyboard combo, like holding Option while clicking to select a track, which temporarily overrides that global preference and causes the opposite to happen in just that one instance. This would be consistent with similar Opt-Click scenarios in many other apps.)
And since the default setting would still be the automatic Record Enabling of a selected track, for the very casual user nothing would have changed. This trumps the counter-argument of "oh it's just a consumer app and we don't want to make it too complicated".
In any case, thanks again HT for the quick reply.
jb

How to write the new records not with existing records.

hi,
I have a script.If i execute the script it writes the records.but its writing with the exisiting records.It writes not only the new records but also the old records.
for eg: the exisiting records are:
1111115-2,USD,DINESH,1,1,,,,9,,,,123456184001,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111116-2,USD,DINESH,1,1,,,,9,,,,123456184001,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111117-2,USD,DINESH,1,1,,,,9,,,,123456184001,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111118-2,USD,DINESH,1,1,,,,9,,,,123456184001,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111119-2,USD,DINESH,1,1,,,,9,,,,123456184001,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
but now what happend is the new records such as
1111116-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111117-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111118-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111119-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
it gets appended with the old existing records,
1111117-2,USD,DINESH,1,1,,,,9,,,,123456184001,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111118-2,USD,DINESH,1,1,,,,9,,,,123456184001,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111119-2,USD,DINESH,1,1,,,,9,,,,123456184001,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111113-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111114-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111115-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111116-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111117-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111118-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
1111119-2,USD,DINESHBABU,1,1,,,,9,,,,123456184003,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9999,,,,
there will be some problem happens when we are going to upload a bulk data of say 25000 records.if its gonna update 20000 records,rest 5000 records i have to do it in next step,if this is going to happen then the first 20000 records will be displayed forever.because it have the capacity to write 20000 records.thenext 500 records will not be written.so there is a chance of redundancy.how to avoid this redundancy while running this script
my script is
create or replace procedure input_tables(table1 in varchar2)
is
str varchar2(32767);
cnt number(2);
cursor c1(tname in varchar2)
is
select column_name
from all_tab_columns
where table_name = tname
order by column_id;
rec c1%rowtype;
begin
cnt:= 1;
str:= 'declare '||
'cursor c2 '||
'is '||
'select ';
open c1(table1);
loop
fetch c1 into rec;
exit when c1%notfound;
if cnt = 1 then -- Added New
str:= str||rec.column_name; -- Added New
cnt:= cnt + 1; -- Added New
else -- Added New
str:= str||'||'',''||'||rec.column_name; -- Added New
end if; -- Added New
end loop;
close c1;
str:= str||' SRC from '||table1||';'||
' r2 c2%rowtype;'||
' ft UTL_FILE.file_type;'||
' str2 varchar2(200);'|| --Added New
' begin '||
' ft := UTL_FILE.fopen(''SAMPLE'',''OUTPUT.csv'',''w'');'||
' for r2 in c2'||
' loop '||
' UTL_FILE.put_line(ft,r2.SRC);'||
' end loop;'||
' UTL_FILE.fclose(ft);'||
' end;';
execute immediate(str);
end;
thanks,
Ratheesh.

Hi!
U can check the following script --
create or replace procedure input_tables(table1 in varchar2,start_col in number,last_col in number)
is
     str varchar2(32767);
     cnt number(2);
     cursor c1(tname in varchar2)
     is
       select column_name
       from all_tab_columns
       where table_name = tname
       order by column_id;
     rec c1%rowtype;
begin
     cnt:= 1;
     str:= 'declare '||
     'cursor c2 '||
     'is '||
     'select ';
     open c1(table1);
     loop
          fetch c1 into rec;
          exit when c1%notfound;
               if cnt = 1 then -- Added New
                    str:= str||rec.column_name; -- Added New
                    cnt:= cnt + 1; -- Added New
               else -- Added New
                    str:= str||'||'',''||'||rec.column_name; -- Added New
               end if; -- Added New
     end loop;
     close c1;
     str:= str||' SRC from '||table1||
     ' where rownum between '||start_col||' and '||last_col||';'|| -- Added New
     ' r2 c2%rowtype;'||
     ' ft UTL_FILE.file_type;'||
     ' str2 varchar2(200);'|| --Added New
     ' begin '||
     ' ft := UTL_FILE.fopen(''SAMPLE'',''OUTPUT.csv'',''w'');'||
     ' for r2 in c2'||
     ' loop '||
     ' UTL_FILE.put_line(ft,r2.SRC);'||
     ' end loop;'||
     ' UTL_FILE.fclose(ft);'||
     ' end;';
     execute immediate(str);
end;
/ To print first ten rows --
exec input_tables('EMP',1,10); --first 10 rowsTo print next remain rows --
exec input_tables('EMP',11,15);N.B: No tested....
Regrads.
Satyaki De.

What buffer do the "non-record enabled" tracks play at in Logic?

Similar Messages

Maybe you are looking for