What cable do I need to connect my ACD 21"to a new MacBook Pro?

I have an Apple Cinema Display (21") about 5 or 6 yrs old. It has a set of FW400, USB, Power, and a video (24pin?) plug on the end. I had an adaptor for that plug to use it with my old MacBook, but that video adaptor doesn't fit the new MacBook Pro I have (Aug 2011).
What do I need to get the MacBook Pro connected to the Cinema Display?
Thanks!
Alan.

<http://store.apple.com/us/product/MB570Z/B/mini-displayport-to-dvi-adapter>

Similar Messages

  • What do I need to connect my apple cinema display to new macbook pro

    what do I need to connect my apple cinema display to new macbook pro?

    2011 macbook pro with TB ->  apple 27" Cinima Display with mini-displayport 
    Does this work natively?  Is there an adapter or workaround? 
    No, not until or if an adaptor becomes available.  See this thread.
    Apple display and Thunderbolt compatibility

  • What cable should I use to connect an old iBook G4 to a MacBook Pro in order to transfer files?

    I'd like to transfer files from the iBook G4 to my new MacBook Pro.  However, I'm not a "pro" at using a computer and I'm not even sure what cable to use to connect the two laptops.  I welcome your suggestions!

    The Y is FireWire and the MBP has a FW800 port. On the iBook you should find a FW400 port shaped like an arrow (see below, left pic). So for speediest transfer, you need a Firewire 400 to Firewire800 cable that will allow you to plug both Macs together (right pic).
    Once you have gotten that, place the IBook in Target Disk Mode (see here: http://support.apple.com/kb/HT1661 ) and connect both with the cable. The iBook's hard disk drive will appear on the MacBook's desktop. You can either drag stuff across or use the Migration Assistant found in Utilities to ensure applications get transferred correctly.

  • What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro?  I need to transfer files from the old hard drive to the new computer.

    What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro?  I need to transfere files from the old hard drive to the new computer.

    No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
    I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
    I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
    synghem wrote:
    Thank you LowLuster,
    At the apple store they said I needed an esata to usb wire.  But looking at wires on line has been confusing.  Is sata the same as esata?  How do I know if I need a usb 3 or usb 2?

  • What cables do I need to connect my 2013 macbook pro to my HD tv? I know I need mini display to HDMI, but male? female HDMI??? and also, do I need a separate cable for sound?

    what cables do I need to connect my 2013 macbook pro to my HD tv? I know I need mini display to HDMI, but male? female HDMI??? and also, do I need a separate cable for sound?

    Actually you need a Thunderbolt to HDMI adapter. It will carry both audio and video.
    This one will work: Mini DisplayPort | Thunderbolt® to HDMI® Adapter w/ Audio Support

  • HT1338 What cable do I need to connect my macbook pro to my television(hdmi)?

    What cable do I need to connect my macbook pro to my television(hdmi)?    

    If your Macbook has a Mini Display port and you want to connect it to an HDMI input on your TV you can use the Apple adapter available here;
    http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er
    A similar, non-Apple connector is available on Amazon here:
    http://www.amazon.com/DisplayPort-Female-Adapter-Macbook-Pro/dp/B002HU629E/ref=s r_1_1?ie=UTF8&qid=1325274750&sr=8-1
    Hope this helps.

  • What cable do I need to connect my 20in cinema display to my 2008 imac as I want to use it as adual screen?s, what cable do I need to connect my 20in cinema display to my 2008 imac as I want to use it as adual screen?s

    what cable do I need to connect my 20in cinema display to my 2008 imac as I want to use it as adual screen?s, what cable do I need to connect my 20in cinema display to my 2008 imac as I want to use it as adual screen?s

    Hello, depends on which 20in Cinema, but likely...
    Apple Mini-DVI to DVI Adapter
    http://support.apple.com/kb/HT3235

  • What cable do I need to connect my 27 inch iMac to my Cinema Display

    What cable do I need to connect my 27 inch iMac to my Cinema Display to have two displays?

    It depends on what type(s) of video input you have on your TV. If you've an open HDMI port on your TV, you can use a Thunderbolt (Mini DisplayPort) to HDMI adapter and it will carry the sound also. See -> here.
    Good luck,
    Clinton

  • What cable do I need to connect an i-pod classic to a Boze Wave machine?

    What cable do I need to connect an I-pod classic to a Boze wave machine?

    If you're trying to transfer the music, from the Nano to the Air, you have to either download your purchased songs again in the purchased tab of iTunes or sync them to the Air, using iTunes on your computer.
    Its been a few years since I've used a Nano, but IIRC, the only way to get the music on the device to begin with is by syncing with iTunes, so the songs have to be in your iTunes library.

  • What cable do i need to connect my macbook pro to the hdmi input on my tv?.

    what cable do i need to connect my macbook pro to the hdmi input on my tv?.

    hi Sam
    It's actally an HDMI adapter that Apple sells.
    You hook the small adapter up to your MBP and then HDMI cable to your TV. Please note adapter is for HDMI compliant for HDMI rev 1.3 and above:
    My TV, which has DVI port also, besides HDMI gets its best resolution by DVI of which also sell at Apple store for the MBP.
    Bottom line is check w/ your TV manufacture to be sure your flat screen supports 1920 X 1200.
    Let 'er rip and...
    cheers

  • What cable do I need to connect a 2nd Monitor from the thunderbolt port?

    Hi I have got one of the brand new iMac's with thunderbolt ports - what cable do I need to connect my Imac to a 2nd display either VGA or DVI - also is there a budget version about as well as I am sure its going to cost a lot from the apple store     

    Thanks I understand that I need another cable and have that from when I connected my old PC to the 2nd monitor.
    http://store.apple.com/us/product/MB570Z/A?mco=MTY3ODQ5OTY  - is this the one I need if going to DVI
    I just dont want to waste more money on a cable that says its for an imac to 2nd screen and find it doesnt fit
    For info my iMAC is the latest version (27" with the 2 thunderbolt connections and 1 firewire)
    Thanks

  • What cable do I need to connect my MacBook Pro to my TV?

    What cable do I need to connect my MacBook Pro to my TV?

    If your Macbook has a Mini Display port and you want to connect it to an HDMI input on your TV you can use the Apple adapter available here;
    http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er
    A similar, non-Apple connector is available on Amazon here:
    http://www.amazon.com/DisplayPort-Female-Adapter-Macbook-Pro/dp/B002HU629E/ref=s r_1_1?ie=UTF8&qid=1325274750&sr=8-1
    Hope this helps.

  • What cable do I need to connect a 30in Cinema Display to a 2013 Mac Pro

    what cable do I need to connect a 30in Cinema Display to a 2013 Mac Pro

    No.
    <http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter>

  • HT1454 What cable do I need to connect iphone 4 to HD Visio TV?

    What cable do I need to connect iphone 4 to HD Visio TV?

    http://store.apple.com/us/product/MC748ZM/A/apple-composite-av-cable?fnode=45&fs =m.iphoneCompatibility%3Diphone4
    http://store.apple.com/us/product/MD098ZM/A/apple-digital-av-adapter?fnode=3a&fs =m.ipadCompatibility%3Dipad3gen
    http://store.apple.com/us/product/MC552ZM/B/apple-vga-adapter?fnode=3a&fs=m.ipad Compatibility%3Dipad3gen
    There is also a component cable but I can't find it

  • What cable do I need to connect iPhone /iPad to a receiver

    What cable do I need to connect iPhone /iPad to my receiver

    Any stereo audio cable will work strictly for audio, just like your headphones.
    If you want to use AirPlay Mirroring you need an AirPlay - compatible receiver, or an AppleTV.
    Denon, Marantz, Pioneer, Onkyo, Yamaha and others all manufacture AirPlay compatible receivers.

Maybe you are looking for

  • How to add a new field in the cube and load data

    Hi, The requirement is We have  ZLOGISTICS cube , the data souce of this filed has REFDCONR-reference dcument number filed . We have to create a new field in cube load data and get this new filed into the report also. Please any one can help me with

  • Re Name Images on Website?

    Can I go into my site, Edit a page, R click and bring up an images Properties, and rename it? this one is named 3AA_000 and I'd like to give it a search engine friendly name. [IMG]http://i11.photobucket.com/albums/a173/JoeWood_/Misc/Contribute/JGarde

  • Can a GSS respond with a different IP if a target server is down?

    This is my first GSS and I have read the Cisco Administration guide so please take pity on me. I don't have any CRA or VIP devices on my network , so is it possible to have the GSS return one IP address if the target device is up and another IP addre

  • $$context from java

    here is my situation. I have swing application based on jnlp which is running on tomcat. I modified tomcat to run application from root. but my jnlp is in one folder under webapp. for example my webapp name is test. so i have folder called test1 unde

  • I can't see the Copy dialog box - ideas?

    Yep, it's as simple as that. When I copy something, I can't see the dialog box showing the progress of the copy/move/etc. In the Window menu, it shows that there's a copy dialog open, but I just can't see it.  It's not on another desktop or in a corn