What camera for NLE in Ppro3

my choices are
sony z1
sony v1
panasonic hvx 200
( think I remember from a previous posting that ppro & z1 combo was "no good"??? )
comments welcome

My computer is not PPro CS3 ready, so I'm still using PPRO 1.5 and shooting SD to tape with HVX200. However, I've shot on the P2 Card and played the footage back on my Sony Bravia HDTV. Beautiful images. Now I'm waiting for a client to demand HD so I can justify the expense of a new computer. You can't go wrong with HVX200. If you can hold out on a camera purchase until after NAB, do so.

Similar Messages

  • What Camera for Imaq

     I need a camera to go with imaq vision and so
    far have I have found that ieee 1394 would be a good way to start. I saw that I
    would need a IIDC DCAM camera but after looking at the prices they were pretty
    expensive. I was wondering what the cheapest method to set up a working camera
    would be. USB type connections won’t work for me as I tried to install the
    support but couldn’t get it to work. So I decided to buy a ieee 1394 card from
    amazon. Do digital cameras work? Would I be able to connect a Canon Powershot
    A620  to the ieee 1394 card  and have it processed through imaq and
    labview? Also it would help if you could post what type of camera you are using
    with your ieee card for reference.

    Hello Leonitas,
    Unless the Canon Powershot is IIDC-compliant, it will not work with NI-IMAQdx (which in included in the Vision Acqusition software package).  The good news is that there are several inexpensive webcams that are compliant.  Here is the best website I've found for reviewing all of your camera options (be sure to check each camera's IIDC status):
    http://damien.douxchamps.net/ieee1394/cameras/
    I hope this helps,
    Kyle V.

  • What Camera for direct HD recording in iMovie?

    I'm running iMovie 09 on an i7 iMac.
    With my standard def Sony Camcorder I can record 'live' video, via a firewire cable, directly into iMovie, no need to go to tape and then import.  I now want to go HD and need a camera that can do the same type of recording, however all new HD cameras only have a USB port and the few I have tried do not let me record 'live' direct to iMovie.  I want to avoid having to record to media/SD card, then import into iMovie,  my timeline needs to be quick!
    Can anyone offer some advice?

    Hello again, Hinsight4
    I have seen posts from three or four users about this problem on iNtel Macs.  You should try the suggestions offered in the other thread where you posted about this:
      http://discussions.apple.com/message.jspa?messageID=5112825#5112825
    If none of those suggestions resolve your problem, you likely have a hardware problem. In that case, contact the retailer who sold you your Mac, Apple, or your Apple-Authorized Service Provider for professional help.
    EZ Jim
    PowerBook 1.67 GHz   Mac OS X (10.4.10)    G5 DP 1.8  External iSight

  • I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

    I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

    All,
    A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
    Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
    The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
    Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
    So happy to be done w/this one!
    Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
    TC

  • What is the best camera for me?

    I don't know much at all about cameras, so I'm really hoping someone will be able to help me! I'm looking for a camera that's better than your standard point and shoot digital camera but one that doesn't cost a fortune. I want to be able to take pictures of NASCAR cars going down the track without them being blurry. I would also like to be able to take pictures of things that are sitting still or aren't going quite 200 mph. I guess I just want an all around good camera that also has the ability to take good, non-blurry pictures of NASCAR cars in motion. I was wondering if anyone could tell me what the best camera and/or lense would be for this. Thanks so much for your help!

    This is one instance where good gear helps but knowing how to use it properly is more important. Panning skills will be important, & so will choosing the right focal length of lens. I'll assume you have to shoot from the stands but don't know how far you'll be from the stretch of track you're hoping to shoot the cars along. A camera with a good AF system matched to a lens with fast AF capabilities will help too, but you could do this old school & use manual settings & manual focus too. You would set up the camera based on the lighting favoring a Tv that can freeze the car but blur the background & wheels / tires. Then you pick an ISO to allow shooting in the f8 range at that Tv & pre focus on the section of track in front of you. Pan with the car or group of cars as they go by & take a few shots while they are in the zone you've pre focused on. 
    If however you're really serious about it & think you'll attend enough events to justify spending the money the 7D, 1D2n, 1D3 & 1D4 are all worthy bodies for action thanks to their AF systems & frame rate. For lenses I suggest considering any of these as a starting point but again you may need longer depending on access to the action. 70-200 f4 L, or the IS version or maybe the f2.8 versions but since the 70-300 L IS seems to have both a very fast & accurate AF system it would be my first choice as a from the stands starting point. The 100-400 L would be my next addition to a motorsports kit but I don't think it's the lens I'd start with. 
    As for setting up a camera for action (DSLR's but some P & S may work too) I wrote an article which is a good starting point & the suggested shutter speeds for prop planes fit a rookie shooting motorsports so I recommend reading this plus use the link in my last post for another set of lessons from Canon that you should read.
    http://www.rccanada.ca/rccforum/showthread.php?t=147971
    As a side note I started attending R/C events to work on my panning skills so I'd be better at the track. A smooth panning swing is developed through practice & it's the key to good results, and follow through after the last shot in each sequence.
    "A skill is developed through constant practice with a passion to improve, not bought."

  • What camera raw download do I need for photoshop CS6 and a canon 5D mark 111 on a Mac 10.8.5 computer?

    What camera raw download do I need for Photoshop CS6 with a Canon 5D mark 111 on a Mac 10.8.5 computer

    Got it to work.
    Thanks so much for your help.
    On Sun, Aug 17, 2014 at 2:36 PM, John Waller <[email protected]>

  • What camera raw default settings would you use for the Canon 5D Mark 3. I have PS CS6.  Thank you.

    What camera raw default settings would you use for the Canon 5D Mark 3. I have PS CS6.  Thank you.

    Really, this is a question you should be asking yourself...
    What do you shoot? Makes a difference...
    Typical ISO that you shoot? Makes a difference...
    Shooting for clients or yourself? Makes a difference...
    Look, there is no magic bullet...the ACR/LR "Default" should only be changed for those adjustments you make 70-90% of the time and sould not be confused with image by image adjustments...
    So, as asked, your question can not really be answered other than to say, use a default that suits you.

  • What camera to buy for taking close pictures of coins in mint state condition?​???

    hi
    what camera to buy for taking close pictures of coins in mint state condition????uncirculated coins ??

    BetterWay wrote:
    The camera is not so much of an issue here as making sure that you get the right glass(lens) .
    Both Nikon and Canon have specialty lenses to allow Macro (1:1 or lifesize or greater magnification) images to be made.
    I would also recommend that you get a good tripod and focusing rails to mount your camera on as most macro photography is best done using manual focus and moving the camera.  This is due to the fact that macro lenses have a very shallow depth of field.
    If you don't want to go to this extreme, then at least get a small sturdy tripod and always use a remote shutter release.
    All of this is related to DSLR's.
    If you want to go the PnS route, then look for one that emphasizes its macro capability and again, use a tripod.  Again, the lens is the most important item here.
    Actually, no - lens is not the most important - coins are highly reflective and as a result VERY difficult to light properly - the lighting equipment is going to be the most important.
    Lens will be second most important - you can probably do fine for coin photography with one of the common pseudo-macro lenses that only do 1:2 and not 1:1.  However a true 1:1 macro lens will give you the most flexibility.
    Since the lighting equipment is the most important, the key here is going to be that the camera has support for an external flash.  This is guaranteed for an SLR but rare in P&S cameras.
    *disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

  • I wanted to ask whether the camera for ipod touch comparable to a digital camera? if not are there apps available that can turn it into a digital camera? i want to buy an ipod touch and i like photography....what should i do?plz suggest

    i  wanted to ask whether the camera for ipod touch comparable to a digital camera? if not are there apps available that can turn it into a digital camera? i want to buy an ipod touch and i like photography....what should i do? plz suggest

    The iPod touch has a very rudimentary camera.  It has only a 0.6 MP resolution, no optical zoom, no flash, etc.   There is no app that can improve this as it is limited by the hardware. So it is not a replacement for a digital camera (nor even for an iPhone whose camera has a 5.0 MP resolution.

  • HF R500 as camera for closed circuit setup. Will it show the what is showing in the viewfinder

    I am needing a camcorder to use as a camera for a closed circuit system in a church.  Will the menus in the viewfinder show through the HDMI output. Or will it look like it does when playing back a recording.  I have used cameras before which showed the rec light in the picture.  I need a camera which doesn't do that.  Will the Vixva HF R500 work?
    Solved!
    Go to Solution.

    Hi Rzrbk!
    Thanks for the post.
    What you see on the screen will appear on the live output over HDMI.  To turn off the onscreen displays, please fo the following:
    Open the menu.
    Select the [Display Setup] tab.
    Select [Output Onscreen Displays].
    Select [Off].
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • What is the best Wi-Fi camera for the iPad

    What camera company makes a Wi-Fi camera it's easy to use with the iPad.

    If money aint a problem, I would go with a GoPro(Black Edition). It gives its own wi-fi signal and is almost everything proof, and really hi-def.

  • Best Camera for $1500 or less

    What is the best mini-dv 3ccd camera for $1500 or less? I wish I could spend more but that is my limit at this time and I need a camera bad. Any suggestions?

    Hey,
    Keep in mind that the XL-1s is somewhat clumsy and awkward to handle. If you are used to ENG style... the Canon has no comfortable way to rest it on your shoulder. If you like to hold it out front, using the top handle, while framing your shot with the flip-out LCD... the XL-1s has no flip out LCD. Just a big eye cup style viewfinder.
    The up side is the interchangeable lenses available for the XL-1. But if you are test driving one this weekend, be sure to ask how many lenses that price includes. Also, is there a wide angle adaptor included as well.
    For my money... a used Canon GL-1 or a GL-2 if available, (the GL-2 is the newer version, with a better audio section). Being Canon devices, they already have superior optics. Both camcorders feature optical stabilization and [real glass!] 20:1 built-on lenses, and good sized flip-out LCDs. Since 2000, our church has been using 3 GL-1's for recording the services (via long S-Video runs to the switcher) as well as on remotes for the special dramatizations which are shown on the big screens during the actual services. Never a down day. The GL-1 is able to record in 30p as well as 16:9 anamorphic, and download via Firewire into any NLE. I've owned mine since 2000 as well. Never a glitch in the beginning with iMovie, later with FC Express, or now with FCP 5.1.4!
    So... get yourself a used GL-1 and one of those Beechtek DXA-2S mic/line adaptors, so you can use pro mics in the field, and for under $1,500 you have a formidable, light-weight shooting rig.
    JC
    G5 Quad 2.5 PPC   Mac OS X (10.4.10)   3 monitors powered by GeForce 7800GT and 6600. JVC GY-HD100 camera; FCS 5.1

  • HT4972 I have ipad 1 . And i want to update it from ios 4.3.5 to ios 7 but i can't why ?? Please help me becouse i can't download apps from app store !!!!!   I would suggust:  1 to create a big camera for i pads and ipods and iphones so we can put it in a

    I have ipad 1 . And i want to update it from ios 4.3.5 to ios 7 but i can't why ?? Please help me becouse i can't download apps from app store !!!!!
    I would suggust:
    1 to create a big camera for i pads and ipods and iphones so we can put it in another ipad or ipod or iphone and it has a zoom lens
    2 when i downloaded photos and music from a computer to my ipad , i cant delete them now plese do the itunes like samsung becuz samsung have an easier way to download thing from computer
    I hope to help me with my poblome and fix it please !!??
    And i hope to take my suggusts and make me happy becouse apple it is cooler from samsung
    Apple the best
    H.M

    The iPad 1 can't run the newer operating systems. It'd be like trying to play a bluray disc in your 6 year old dvd player....it simply lacks the hardware to make the software run.
    No suggestion about the camera, but given that Apple's attitude seems to be to focus more on the more mobile devices for photography (the iPhone and Touch cameras got features, the iPad and mini didn't), that is highly unlikely. You can tell Apple what you want, but you'd probably be money ahead to get a digital camera.
    as to the photos, anything put on via iTunes has to come off via iTunes.Your main alternative would be to look for photo apps that offer file exchange that may give you more functionality.

  • Snow Leopard Printing Woes - what worked for me

    I found many print problems posted EVERYWHERE from every printer manufacturer and model and many solutions and some worked for some people. None worked for me.
    I have a HP Laserjet 2100M, which is old, but is listed as compatible with SL. I cannot part with it, as it is a true laser printer, not a monochrome, which means when I need to colour separate say a blue and red document, it prints as solid, not grayscale. It has printed 44,820 pages for me over the years, with only laser cartridge replacement as an expense. As well, I cannot find anything but monochrome for a replacement.
    It worked on my old iMac G5 running Leopard, however, when I got my new iMac running Snow Leopard, I got "Printer Offline" message and it would not go online and while some solution ideas got it to print, sometimes, it was only good for one or two jobs and then would stop again, or it would say printing and nothing would print.
    Here is what worked for me:
    I disconnected my printer's usb and power supply, reset printer system.
    Went to Macintosh HD-Library-printers-PPDs-contents-resources and deleted all of the HP Drivers.
    I got my HP 2100 series driver from my old iMac and put that back in the resources folder and emptied trash.
    I shut down my computer.
    Replugged in power to printer.
    Started up computer.
    After fully launched, I connected my USB cable for the printer. I went to add printer and it came up right away and said new software update was available for my printer AND I SAID NO to updating. In selected my driver, and...
    My printer and I have reached a compromise!
    It still says offline, however, everything is printing anyway... this I can live with.
    I also found this link, which I will only try if I encounter any other disruptions
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&task Id=110&prodSeriesId=385457&prodTypeId=18972&prodSeriesId=385457&objectID=c018677 22
    At some point I printed a Self Test/Configuration page which has I/O Port Status as
    USB STATUS - not ready
    and Appletalk Status - Ready
    which is probably a good clue, however, I have been printing successfully for 15 hours and my hair is starting to grow back.

    The HP document appears to solve your issue. When your hair starts falling out again, use it.

  • HT2986 I got a Samsung video camera for Christmass.  I get error message when trying to down load video.  Pictures down load fine.  I have a Imac with system 10.5.8 and Imovie 8 (7.1.4).  Is it camera problem or something on my end.  Any help is appreciat

    Got a new video camera for Christmas, Samsung HMX-F80, it down loads pictures just fine, but videos I just can't get it to down load.  I was able to down load to my PC part no problem.
    MY Imac, System 10.5.8, Imovie 8  (7.1.4).   Do I need to upgrade?  Or what.
    Any help is appreciated.

    Is it listed here?
    iMovie 8 Camcorders supported:
    http://support.apple.com/kb/HT1014

Maybe you are looking for

  • How can I use a TTL signal at my PFI to start a VI

    Hello, I am writing a VI to controll a motor with Digital Output, this is working. But this Vi has to start after the first (second, third or fourth) TTl pulse. How can I do that? I see some trigger options by AI and AO Vi's. But these Vi's are for d

  • Font Smoothing/Clear Type disabled on RDP Session, color depth low

    Hello One of our customers has a new laptop Asus G771JM-T7021H with Windows 8.1 on it. The graphics, font etc. is good as long as he works locally. When he connects to the terminal server (2012R2) via RDP, the resolution and font is hardly readable.

  • Re: Whats the correct way to layout a JFrame

    Hi, I am fairly new to Java and have just started to put together my first big application. Its a simple application written in Swing where the user is first shown a login screen, when he presses the login button and is taken to another screen where

  • Can we set default value to dynamic parameter?

    <font size="3"><font face="Times New Roman">Hi,</font></font><font size="3"><font face="Times New Roman"><span> </span>I am using BO XI and CR XI.</font></font><font size="3"><font face="Times New Roman"><span> </span>I want to set default value for

  • ACLDL, Vistex Vendor Keys - Invalid from 46C to ECC 6 (EHP4) upgrade

    HI We are upgrading our system from 4.6C to ECC6 (EHP4) directly using CUUC approach. In the IS_SELECT phase we have got three add-ons ACLDL IRMGLB IRMIPM The note 632429 is mentioned to be referred to get the vendor keys. But there is no vendor key