What can be done if clean edge feature in doing panoramas will not function in pse10 or 11?

I am using photomerge in pse11 or 10 and stitching 6 images together using auto. The image has come out fantastic,but the edges will not fill in when checking use clean edge feature as i get the error message that it will not work due to too much Ram? The 6 files are about 25m apiece and the final psd image is 354m which is a gigantic file. Is
there a way to get this to function or do i have to use the clone stamp etc. to fill in the blank areas on top and bottom of my image. I transferred the images from lr5 as tiff files to pe10 etc. Thanks!!

Yes, that's very common. You can try upping the available ram in the preferences to about 90% (not 100%), or you can use smaller images in your pano.

Similar Messages

What can i do if my ipod 4g is charging but will not turn on?, what can i do if my ipod 4g is charging but will not turn on?

Hey guys!! Well i left my ipod outside for like 5 min. In the sun but then i went to get it and it said that the tempeture was too hot so i left it cool off for a minute. Then i turned it on and it was working fine but it ran out of battery and it turned off. I went to put it to charge and it said it was charging so i waited for it to turn on by itself but it never did. It just kept saying low battery charging. I left it to charge ALL night and when i woke up it still said low battery charging!! What can i do to fix this someone please help!!! Reseting it work, ? And how to reset?? THANKS!!!!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

What can I do to rectify the situation in which Firefox will not open pdf files in the browser, even though I have already used all the help suggestions to no avail?

I have tried everything Mozilla has suggested. Still when I click on a pdf, I get the message that the browser cannot open a pdf. I have gone through the help protocol, and it does not work.
I have uninstalled Firefox and reinstalled it, and still not able to open pdf files within the browser.
What else do I do, except go to IE or Chrome and just leave Firefox completely???

A possible cause is the presence of a PDF plugin from an older Adobe Reader plugin in the plugins folder in the Firefox program folder.
See [[Troubleshooting plugins]]
See also:<br />
http://kb2.adobe.com/cps/405/kb405461.html - The Adobe Acrobat/Reader cannot be used to view PDF files in a browser<br />
http://kb2.adobe.com/cps/836/cpsid_83688.html - I can’t view a PDF document in my web browser<br />

2. Refine your search Found 1 result for THE NEW FIREFOX DOWNLOAD IS STUCK. WHAT CAN BE DONE TOO COMPLETE THE NEW DOWNLOAD in English

THE NEW FIREFOX DOWNLOAD IS STUCK. WHAT CAN BE DONE TOO COMPLETE THE NEW DOWNLOAD in English

Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

What can be done to minimize the grotesque Edge Enhancement?!

Hello everyone. I have been experimenting all week long with exporting projects from CS5 Premiere Pro (all eithe DSLR HD or 1080p scanned from film) and then burning DVD's in Encore. I'm trying to use the highst bit rates posible and multiple passes in encoding.
Somwehere along the way Edge Enhancement is being added. It is grotesque. When I play back the DVD's on my 65 inch TV they look terrible. EE everywhere (it is not added by the TV. I disabled EE in the service menu. It's completely shut off).
What can be done to minimize this? I'd appreciate some pointers.

Can you post a screenshot of what you are seeing? I assume you can see it on computer playback as well.
How are you transcoding? In Encore, or from Premiere/AME? Automatic? (in Encore only), or selectihng settings? If the latter, what are they?
Some users believe that CS5 is doing an okay job of downrezing for DVD. Others believe it is better to do it from Premiere/AME. In answering the above, you'll probably answer that issue as well.

Does not let me add text to my verizon website. This adding text feature works well on internet explorer. I can click on add text, the box opens up but I can not type in the box for some unknown reason. What can be done to correct this problem ...

does not let me add text to my verizon website. This adding text feature works well on internet explorer. I can click on add text, the box opens up but I can not type in the box for some unknown reason. What can be done to correct this problem ...

I didn't search before, but "you are not alone" (the thread [https://support.mozilla.com/en-US/questions/747424 In Verizon's Sitebuilder for webpages, I can not edit text boxes when using Firefox. I do not have this problem if I use Internet Explorer. Is there a setting I can change in Firefox to correct this problem?] has 18 votes for "I have this problem, too).
I can only guess about the reason... Firefox works with many websites' "rich text" editors, but ones that haven't been updated for five years may assume that Firefox is the old Netscape browser and use scripting techniques that don't work in Firefox.
If Verizon has a different "basic" or HTML editor that you can tolerate using, you could try that. It might not be subject to the same incompatibilities.
If I someday get a Verizon account, I will surely be looking into this further, but for now, it's hard to suggest anything else.

De-authorizing itunes? Several of my authorized pc's have died, and have no way to deauthorize iTunes on them. Now I am unable to synch purchases on my Iphone to new computer with iTunes because I already have 5 computers authorized. What can be done?

Several of my authorized pc laptops and desktops have completely died over the years, and have no way to deauthorize iTunes on them. Now I am unable to synch purchases on my Iphone to new computer with iTunes because I already have 5 computers authorized. What can be done?

Deauthorise all to reset to zero, then authorize again.
Following quote from Apple Support:
If you need to authorize your new computer and are unable due to already having five authorized computers, you can deauthorize all computers by doing the following:
Click iTunes Store on the left side of iTunes.
If you're not signed in to the store, click the Account button, then enter your account name and password.
Click the Account button again (your Apple ID appears on the button), enter your password, and then click View Account.
In the Account Information window, click Deauthorize All.
Note: You may only use this feature once per year. The Deauthorize All button will not appear if you have fewer than two authorized computers. If you need assistance on using this feature, please contact iTunes Store support via email (http://www.apple.com/support/itunes/store/).

My iPad has started refusing to delete some hotmail emails. What can be done to remedy this?

On my ipad 2, hotmail is refusing to delete some emails. What can be done to remedy this?
It will not allow movement to any other folder outside inbox.
I have already deleted them on my pc hotmail
Thank u for any assiststance

I concur with Meg; having a number of iPads with the Smart Cover, I can say without a doubt that there is no possible way the case could bend the machined-alumnium case of iPad. The force exerted by the magnets is not anywhere near sufficiently powerful; if they were, not only could you not remove the cover, it would be attracting magnetic objects to the iPad. It's not even easy to bend the iPad yourself, much less the weak magnets of the case, which aren't even strong enough so you can pick up the iPad by the case without it coming off.
Something else has bent your iPad, if it indeed is bent (confirm with a verified straightedge; there's an optical illusion that makes the iPad appear to be bent when looked at edge-on, but it's not actually bent). If it is really bend, have you been carrying it it a backpack, attache case or other item with other objects? Set anything heavy on the iPad? I bet you, or someone, has, or something like that, and in such a case the damage will not be Apple's fault and hence not covered by the warranty.
But as Meg suggested, you can take it to an Apple Store and discuss the matter with them. The cover, though, again cannot possible have bent the iPad.
Regards.

What can I use to clean the 5g's included Apple slip/case?

I've had it for 48 hours and it is already pretty dirty.
What can I use to clean it?
It is safe to throw it in the washing machine?
lol, I never thought I'd be asking for washing instructions on this forum. (Or any for that matter)
* New from Apple... the iSpin Washing Machine *

at the moment it is all i've got.
i am going overseas in 3 days and don't have time to order a case from the internet, and the shops don't carry them yet.
i'll try and pick one up when I am travelling, but for now this is all I can use.
How do I clean it?

Tries to load a page from site but never loads, Then need to close Mozilla and reopen it. Told that it is already running, not, then often have to do a hard turn off to shut it down. Why is this happening, and what can be done?

This happened many times today. There is no specific page. I usually have a page open and try to redirect from that page. It shows "connecting", but never does. I have run many scans which all turn up clean. Why is this happening and what can be done to fix it?

Maybe here:
http://www.windowserrorhelps.com/itunes-error-11-how-can-i-fix-itunes-error-11-i nstantly
Is the iPod jailbroken?

Number of System Log Errors Increasing During Nightly Backup - What Can Be Done?

Right now, I'm getting quite a number of warnings and errors with my nightly (wbadmin) backups to external USB drive using Windows 8.1 and the Spring Update. Fortunately, the VSS-integrated system image backups are still sound, but it seems as though
Windows 8.1 is becoming less and less aware and tolerant of them. That's not right!
With Windows 8.1 before the Spring Update I was seeing the warnings, but not the FilterManager errors. The update brought the errors.
Perhaps not too many Windows 8 users use wbadmin start backup -vssFull commands to do their backups, but I'm sure a lot of folks running Server 2012 do.
What can be done to make the backup process smoother and eliminate these warnings and errors?
Here's the specific list of warnings / errors I got from last night, which started at 2:00am and ran to 4:26am:
As usual, clicking the Event Log Online Help button yields: "We're sorry, but the page you requested could not be found. You can search on TechNet for more information." Microsoft, you know that needs to be fixed too, right?
The specific command I'm using, via the Task Scheduler, is:
wbadmin start backup -allCritial -vssFull -quiet -backupTarget:G:\
For those who might suggest 3rd party backup, bear in mind I very much want the VSS integration that Windows Backup provides, and while wbadmin is producing backups that can actually be restored I can ignore these warnings and errors. But it would
be nice to not have them.
And yes, I've considered 3rd party backup solutions, but while wbadmin is producing VSS-integrated system image backups that can be restored from the Windows startup recovery environment I'd prefer those.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

The errors suddenly stopped on their own, but the warnings continue.
As with most software issues, the errors came back again, specifically after a reboot mandated by yet another Windows Update. I'm assuming they stopped before because the Filter Manager just gave up, or maybe the volume numbers got too high (notably
the volume numbers started over again at a lower number).
As of last night, these messages apparently having to do with my wbadmin backup (which starts at 2am) were logged in my System Event Log:
2:00:00 (Information) - Virtual Disk Service - Service started.
2:01:52 (Information) - Ntfs (Microsoft-Windows-Ntfs) - Volume System Reserved (\Device\HarddiskVolumeShadowCopy22) is healthy. No action is needed.
2:02:15 (Information) - Ntfs (Microsoft-Windows-Ntfs) - Volume C - NoelC4 SSD (\Device\HarddiskVolumeShadowCopy23) is healthy. No action is needed.
2:02:17 (Information) - Kernel-General - TxR init phase for hive \??\GLOBALROOT\Device\HarddiskVolumeShadowCopy23\Windows\system32\config\SYSTEM (TM: {5df557d3-c9aa-11e3-829a-1803734ec99c}, RM: {5df557d2-c9aa-11e3-829a-1803734ec99c}) finished with
result=0xC00000A2 (Internal code=7).
2:02:17 (Information) - Kernel-General - TxR init phase for hive \??\GLOBALROOT\Device\HarddiskVolumeShadowCopy23\Windows\system32\config\DRIVERS (TM: {5df557d5-c9aa-11e3-829a-1803734ec99c}, RM: {5df557d4-c9aa-11e3-829a-1803734ec99c}) finished with
result=0xC00000A2 (Internal code=7).
2:02:21 (Information) - Kernel-General - The access history in hive \??\GLOBALROOT\Device\HarddiskVolumeShadowCopy23\Users\default\ntuser.dat was cleared updating 528 keys and creating 29 modified pages.
2:02:25 (Information) - FilterManager - File System Filter 'FsDepends' (6.3, ?2013?-?08?-?22T07:39:42.000000000Z) has successfully loaded and registered with Filter Manager.
2:02:27 (Warning) - disk - Disk 5 has been surprise removed.
2:02:29 (Warning) - disk - Disk 5 has been surprise removed.
2:02:44 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume15'. This volume will be unavailable for filtering until a reboot. The final status was 0xC03A001C.
2:02:44 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume15'. This volume will be unavailable for filtering until a reboot. The final status was 0xC03A001C.
2:02:45 (Warning) - disk - Disk 5 has been surprise removed.
2:19:55 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume17'. This volume will be unavailable for filtering until a reboot. The final status was 0xC03A001C.
2:19:55 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume17'. This volume will be unavailable for filtering until a reboot. The final status was 0xC03A001C.
2:19:55 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume17'. This volume will be unavailable for filtering until a reboot. The final status was 0xC03A001C.
2:19:55 (Warning) - disk - Disk 5 has been surprise removed.
2:20:04 (Warning) - disk - Disk 5 has been surprise removed.
2:30:00 (Information) - Virtual Disk Service - Service stopped.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Every time I try to upload a video to youtube (or pictures to blog services like tumblr) using Firefox, I cannot upload them unless I use the "basic uploader" function. Why and what can be done?

Every time I try to upload a video to youtube or a pictures to a blog service, such as tumblr, I am unable to do so with the default uploading options (usually something that allows multiple uploads, etc). Instead, I can upload these media using their "basic upload" functions. Why and what can be done?
== URL of affected sites ==
http://www.youtube.com; http://www.tumblr.com

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

I have an Iphone 4 16gb and updated the IOS 6.1.2. after the update my 3G is not working at all??. can you please suggest what can be done to rectify this problem?

i have an Iphone 4 16gb and updated the IOS 6.1.2. after the update my 3G is not working at all??. can you please suggest what can be done to rectify this problem?

I have the same problem. After updating to 6.1.2 my iPad 3,2 will not find Verizon network. It just says "Searching..." for ever. Any thoughts?

I recently updated to iOS 8.0 on my Ipad however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this?

Hi, I recently updated to iOS 8.0 on my Ipad mini however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this problem? Also i cannot download anything from the App store as a result of this.

Can you check the Object Security for the Analysis Menu and Export button and see if it is restricted?
Also, is this a Oracle DB? IF so, has the following 32 bit Oracle Client components been isntalled:
Oracle Objects for OLE
Oracle Data Provider for .NET
Oracle Providers for ASP.NET

Drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

Nothing. It's nothing to do with PSE; this is a limitation of Photos, as is the loss of being able to use an external editor without exporting copies of your images.

What can be done if clean edge feature in doing panoramas will not function in pse10 or 11?

Similar Messages

Maybe you are looking for