What can be done if ur camcorder is not qualified for FCE HD 3.5?

I recently brought the HDV Sony HC3 and the Final Cut Express HD 3.5... the problem i have now is that the Final Cut express HD 3.5 did not support my camcorder, do i have to wait for the new software update for my camcorder to be in the qualifed device? or is there another alternative which i don't need to spent money?

What do you mean by FCE does not support your camcorder?
Have you tried it?
The official list is virtually useless - they only tested a handful of the thousands of cameras that exist.
Almost every FW equipped Mini-DV camera will work with FCE.
Ian.

Similar Messages

HT1320 What can be done if the restore does not work?

My iPod is a 30GB my OS is MAC OS X version 10.5.7. When the iPod is connected to the MAC the display on it
He iPod shows a folder which is not accessible and www.apple.com/support/iPod. That's all I get. The iPod simply just stopped working one day while in the middle of playing songs.

If Restore is complete, without any error, and you still get the folder icon.
Do the iPod Disk Diagnostic as posted earlier by tt2, it wont fix your problem but helps in troubleshooting.

HT4623 What can I do if iOS 7 is not working for me?

iOS 7 won't show up in my iPad 2. I only have iOS 6.1.3. What should I do?

Apple's servers are probably very busy. You may want to wait for a little while before trying again. Or, try connecting to itunes and updating from there.

HT4061 I am traveling from Ontario to BC and had my iPad in my bag and no banging or anything out of the ordinary and when I pulled it out I noticed it was cracked what can be done

I'm traveling from Ontario to BC via car and had my iPad in my bag with me in the back seat? Nothing out of the usual stopping for gas and when I
Pulled it out I noticed a huge crack and not sure what happen or what can be done please help

Accidental damage is not covered by warranty.
It will cost you approximately US$219.00 to US$299.00 depending on the model.
Apple will replace the entire iPad; they don't repair.
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad

De-authorizing itunes? Several of my authorized pc's have died, and have no way to deauthorize iTunes on them. Now I am unable to synch purchases on my Iphone to new computer with iTunes because I already have 5 computers authorized. What can be done?

Several of my authorized pc laptops and desktops have completely died over the years, and have no way to deauthorize iTunes on them. Now I am unable to synch purchases on my Iphone to new computer with iTunes because I already have 5 computers authorized. What can be done?

Deauthorise all to reset to zero, then authorize again.
Following quote from Apple Support:
If you need to authorize your new computer and are unable due to already having five authorized computers, you can deauthorize all computers by doing the following:
Click iTunes Store on the left side of iTunes.
If you're not signed in to the store, click the Account button, then enter your account name and password.
Click the Account button again (your Apple ID appears on the button), enter your password, and then click View Account.
In the Account Information window, click Deauthorize All.
Note: You may only use this feature once per year. The Deauthorize All button will not appear if you have fewer than two authorized computers. If you need assistance on using this feature, please contact iTunes Store support via email (http://www.apple.com/support/itunes/store/).

Number of System Log Errors Increasing During Nightly Backup - What Can Be Done?

Right now, I'm getting quite a number of warnings and errors with my nightly (wbadmin) backups to external USB drive using Windows 8.1 and the Spring Update. Fortunately, the VSS-integrated system image backups are still sound, but it seems as though
Windows 8.1 is becoming less and less aware and tolerant of them. That's not right!
With Windows 8.1 before the Spring Update I was seeing the warnings, but not the FilterManager errors. The update brought the errors.
Perhaps not too many Windows 8 users use wbadmin start backup -vssFull commands to do their backups, but I'm sure a lot of folks running Server 2012 do.
What can be done to make the backup process smoother and eliminate these warnings and errors?
Here's the specific list of warnings / errors I got from last night, which started at 2:00am and ran to 4:26am:
As usual, clicking the Event Log Online Help button yields: "We're sorry, but the page you requested could not be found. You can search on TechNet for more information." Microsoft, you know that needs to be fixed too, right?
The specific command I'm using, via the Task Scheduler, is:
wbadmin start backup -allCritial -vssFull -quiet -backupTarget:G:\
For those who might suggest 3rd party backup, bear in mind I very much want the VSS integration that Windows Backup provides, and while wbadmin is producing backups that can actually be restored I can ignore these warnings and errors. But it would
be nice to not have them.
And yes, I've considered 3rd party backup solutions, but while wbadmin is producing VSS-integrated system image backups that can be restored from the Windows startup recovery environment I'd prefer those.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

The errors suddenly stopped on their own, but the warnings continue.
As with most software issues, the errors came back again, specifically after a reboot mandated by yet another Windows Update. I'm assuming they stopped before because the Filter Manager just gave up, or maybe the volume numbers got too high (notably
the volume numbers started over again at a lower number).
As of last night, these messages apparently having to do with my wbadmin backup (which starts at 2am) were logged in my System Event Log:
2:00:00 (Information) - Virtual Disk Service - Service started.
2:01:52 (Information) - Ntfs (Microsoft-Windows-Ntfs) - Volume System Reserved (\Device\HarddiskVolumeShadowCopy22) is healthy. No action is needed.
2:02:15 (Information) - Ntfs (Microsoft-Windows-Ntfs) - Volume C - NoelC4 SSD (\Device\HarddiskVolumeShadowCopy23) is healthy. No action is needed.
2:02:17 (Information) - Kernel-General - TxR init phase for hive \??\GLOBALROOT\Device\HarddiskVolumeShadowCopy23\Windows\system32\config\SYSTEM (TM: {5df557d3-c9aa-11e3-829a-1803734ec99c}, RM: {5df557d2-c9aa-11e3-829a-1803734ec99c}) finished with
result=0xC00000A2 (Internal code=7).
2:02:17 (Information) - Kernel-General - TxR init phase for hive \??\GLOBALROOT\Device\HarddiskVolumeShadowCopy23\Windows\system32\config\DRIVERS (TM: {5df557d5-c9aa-11e3-829a-1803734ec99c}, RM: {5df557d4-c9aa-11e3-829a-1803734ec99c}) finished with
result=0xC00000A2 (Internal code=7).
2:02:21 (Information) - Kernel-General - The access history in hive \??\GLOBALROOT\Device\HarddiskVolumeShadowCopy23\Users\default\ntuser.dat was cleared updating 528 keys and creating 29 modified pages.
2:02:25 (Information) - FilterManager - File System Filter 'FsDepends' (6.3, ?2013?-?08?-?22T07:39:42.000000000Z) has successfully loaded and registered with Filter Manager.
2:02:27 (Warning) - disk - Disk 5 has been surprise removed.
2:02:29 (Warning) - disk - Disk 5 has been surprise removed.
2:02:44 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume15'. This volume will be unavailable for filtering until a reboot. The final status was 0xC03A001C.
2:02:44 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume15'. This volume will be unavailable for filtering until a reboot. The final status was 0xC03A001C.
2:02:45 (Warning) - disk - Disk 5 has been surprise removed.
2:19:55 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume17'. This volume will be unavailable for filtering until a reboot. The final status was 0xC03A001C.
2:19:55 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume17'. This volume will be unavailable for filtering until a reboot. The final status was 0xC03A001C.
2:19:55 (Error) - FilterManager - Filter Manager failed to attach to volume '\Device\HarddiskVolume17'. This volume will be unavailable for filtering until a reboot. The final status was 0xC03A001C.
2:19:55 (Warning) - disk - Disk 5 has been surprise removed.
2:20:04 (Warning) - disk - Disk 5 has been surprise removed.
2:30:00 (Information) - Virtual Disk Service - Service stopped.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Every time I try to upload a video to youtube (or pictures to blog services like tumblr) using Firefox, I cannot upload them unless I use the "basic uploader" function. Why and what can be done?

Every time I try to upload a video to youtube or a pictures to a blog service, such as tumblr, I am unable to do so with the default uploading options (usually something that allows multiple uploads, etc). Instead, I can upload these media using their "basic upload" functions. Why and what can be done?
== URL of affected sites ==
http://www.youtube.com; http://www.tumblr.com

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

I have an Iphone 4 16gb and updated the IOS 6.1.2. after the update my 3G is not working at all??. can you please suggest what can be done to rectify this problem?

i have an Iphone 4 16gb and updated the IOS 6.1.2. after the update my 3G is not working at all??. can you please suggest what can be done to rectify this problem?

I have the same problem. After updating to 6.1.2 my iPad 3,2 will not find Verizon network. It just says "Searching..." for ever. Any thoughts?

I recently updated to iOS 8.0 on my Ipad however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this?

Hi, I recently updated to iOS 8.0 on my Ipad mini however when i try to agree to the new terms and conditions i get an error message saying either 'Cannot connect to server' or 'Your session has timed out please try again' what can be done to resolve this problem? Also i cannot download anything from the App store as a result of this.

Can you check the Object Security for the Analysis Menu and Export button and see if it is restricted?
Also, is this a Oracle DB? IF so, has the following 32 bit Oracle Client components been isntalled:
Oracle Objects for OLE
Oracle Data Provider for .NET
Oracle Providers for ASP.NET

Drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

drag and drop to photo shop no longer works after installing Apple "Photos"; It was working fine before the latest Apple update (10.10.3) . what can be done?

Nothing. It's nothing to do with PSE; this is a limitation of Photos, as is the loss of being able to use an external editor without exporting copies of your images.

I am trying to set up iTunes match on my apple tv, but it just keeps showing that it is loading, it has been running for over an hour, what can be done here, it has gone with no problem on my iPhone, iPad but not the tv

i am trying to set up iTunes match on my apple tv, but it just keeps showing that it is loading, it has been running for over an hour, what can be done here, it has gone with no problem on my iPhone, iPad but not the tv

Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

Downloaded IOS 7 and now I do not have a dictionary in iBook. This is very frustrating. What can be done to fix this issue?

Downloaded IOS 7 and now I do not have a dictionary in iBook. This is very frustrating. What can be done to fix this issue?

I've got to agree with Allan. It sounds like the hard drive is corrupt at least. It's possible it might be physically failing. Without backups, it's possible your data is already gone. You need a professional to help you.
If you do not have an Apple Store near you or simply don't have the time to spare, there are some things you can try, but you must understand that it's possible these things could make the chances of recovering your data worse than they already are. Perform the instructions to follow at your own risk!
First, you can try repairing your hard drive with Disk Utility. If that works, see if you can start up the machine. If you can, the very first thing you need to do is back up any data you don't want to lose. You may still need to take other steps, as your system may be damaged as well, but getting the data is the important part.
If Disk Utility cannot repair the problems, you can try DiskWarrior. It can repair problems that Disk Utility cannot. However, it also increases the risk of destroying your data if it fails. If it works and you can start up the machine, do the same as I advised for following success with Disk Utility.
If repairs (with either) were successful, but the machine still won't start up, you can try reinstalling the system. Hold down command-R at startup and then just install right on top of the existing system. If all goes well, you'll be able to start up afterwards and can get your data backed up. If all goes badly, it'll further decrease the chances of getting your data back.
If neither can repair the damage, you're in bad shape. You will need a professional to help you, unless you are willing to lose all your data.

In BW Reporting what can be done without transport

Hi Experts,
In BW Reporting what can be done without transport. Suppose
RRI, DIS to Nav changes
Please Detail or any documentation.
Thanks

Dear,
You cannot make changes in underlying structure of objects in prod system , the changes shoud always come through a proper tranport layer ( dev -- QA -- prod).
CTS(change and tranport system) is build to manage all changes across system , it takes care of versioning as well.
Usually in production system you can do data loading and other data oriented activities.
If you need to work on object related changes, start from a dev system.
regds
Jay

I am unable to sync all my selected songs to my iphone. The error message is that the computer is not authorized. However, I have authorized the computer and iTunes confirms that. Any ideas what can be done to fix this. My phone is an iPhone 4S.

I am unable to sync all my selected songs to my iphone. The error message is that the computer is not authorized. However, I have authorized the computer and iTunes confirms that. Any ideas what can be done to fix this. My phone is an iPhone 4S.

Were some of the songs purchased from a different itunes account?

Bought and installed a new battery for my Mac Book Pro 5.1, intel Core 2 dual, the computer makes a lot of noise! The noise disappears in sleep mode. What can be done?

Bought and installed a new battery for my Mac Book Pro 5.1, intel Core 2 dual, the computer makes a lot of engine noise! The noise disappears in sleep mode. What can be done?

I bought it from Other World Computer last week for $95. 3rd party, I suppose.

What can be done if ur camcorder is not qualified for FCE HD 3.5?

Similar Messages

Maybe you are looking for