What can be preventing me to see the activated multiprovider in BEx?

Hi,
So I have two different multiproviders in Netweaver 7.0 all activated; all under the same infoarea. In BEx, when I try to open to queries attached to these multiproviders, one comes with its queries transported from BW 3.0 but the second multiprovider does not appear in BEx when I searched under InfoArea, let alone see the attached reports.
What can be preventing me to see the activated multiprovider in BEx?
It is some setting in Netweaver, I will appreciate stepst to fix it.
[Note: after the transport, one of the multiproviders had activation problem and was fixed by adding char and key figure, activing update rules, etc... just in case these hints will help you to guide me ]
Thanks

Amanda,
Make sure the second Multiprovider has queries. If you had problems in the activation and queries were included in the same transport, most probably they were not copied.
Maybe you need to retransport the queries.
Not having queries would be the only reason for it not to show in the BEx tree, as far as I know.
Regards,
Luis

Similar Messages

  • What can I do when I see "The backup disk image cannot be mounted"

    I ran the time machine. Then, "preparing backup" showed up for a long time. After that, a window pop out: "Time machine error, The disk image cannot be mounted" What is disk image? What can I do (I can't back up anything)
    P.S. I use time capsule for backup. there were no problem on connection

    I suggest reposting in the TimeCapsule forum here:
    http://discussions.apple.com/forum.jspa?forumID=1253
    This may not be a TimeMachine problem at all but something else.

  • I can't see my facebook games on my mac. what app do i need to see the display and play my games?, i can't see my facebook games on my mac. what app do i need to see the display and play my games?

    i can't see my facebook games on my mac. what app do i need to see the display and play my games?, i can't see my facebook games on my mac. what app do i need to see the display and play my games?

    I don't play any Facbook games, but I'm assuming that they are played using your browser (Safari, Firefox, etc.).
    Clinton

  • What can i do if I scratch the itunes card and I can´t see the code?

    what can i do if I scratch the itunes card and I can´t see the code?

    Follow these instructions;  iTunes Store:  Invalid, Inactive, or Illegible codes, http://support.apple.com/kb/TS1292

  • I have a new mac book air and somehow iPhoto was installed twice.  Also, a second library was created and it became the default library.  I attempted to switch to the original library but it won't open.  what can I do to revert to the old library?

    I have a new mac book air and somehow iPhoto was installed twice.  Also, a second library was created and it became the default library.  I attempted to switch to the original library but it won't open.  what can I do to revert to the old library?

    Both iPhotos open to a default library (#2) which has 300+ photos,  I attempted to "switch to library" under the file tab in iPhoto and tried to choose "other library" which had most of my photos.  When I attempt to open it, it doesn't do anything.  I can see it and there are 2 libraries but it won't open.
    Have you tried to open your old iPhoto library by double-clicking it directly, instead of using the File menu?  That should work, if you are running iPhoto '11 and the library has been created by that version or an older version.  DO you get an error message, if you select the library directly in the Finder?
    I checked and it is the latest version of iPhoto.
    Is it iPhoto '11, version 6.0.5? "Latest version" is ambiguous, because it will depend on your system version.
    Where is your iPhoto Library stored?

  • The black "show shadow clipping" indicator not extinguishable.  What can be done?  I tried the obvious.  There is no evidence of clipping.

    The black "show shadow clipping" indicator not extinguishable. .  What can be done?  I tried the obvious.  There is no evidence of clipping.
    Lightroom version: 5.6 [974614]
    License type: Perpetual
    Operating system: Windows 7 Ultimate Edition
    Version: 6.1 [7601]
    Application architecture: x64
    System architecture: x64
    Logical processor count: 8
    Processor speed: 3.3 GHz
    Built-in memory: 16364.3 MB
    Real memory available to Lightroom: 16364.3 MB
    Real memory used by Lightroom: 1055.2 MB (6.4%)
    Virtual memory used by Lightroom: 1071.8 MB
    Memory cache size: 2.0 MB
    Maximum thread count used by Camera Raw: 4
    System DPI setting: 96 DPI
    Desktop composition enabled: No
    Displays: 1) 1920x1080, 2) 1920x1080
    Application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.6
    Library Path: C:\Adobe Lightroom Catalogs\2014_05_31 (3).lrcat
    Settings Folder: C:\Users\XXXX\AppData\Roaming\Adobe\Lightroom
    Installed Plugins:
    1) Canon Tether Plugin
    2) Facebook
    Config.lua flags: None
    Adapter #1: Vendor : 1002
      Device : 6739
      Subsystem : 25201462
      Revision : 0
      Video Memory : 1003
    AudioDeviceIOBlockSize: 1024
    AudioDeviceName: Speakers / Headphones (IDT High Definition Audio CODEC)
    AudioDeviceNumberOfChannels: 2
    AudioDeviceSampleRate: 44100
    Build: Uninitialized
    CardID: 26425
    Direct2DEnabled: false
    GPUDevice: D3D
    MaxTexture2DSize: 8192
    OGLEnabled: true
    Renderer: AMD Radeon HD 6800 Series
    ShaderModel: 11.1
    Vendor: AMD
    VendorID: 4098
    Version: 1002:6739:25201462:0000

    First off, this image is not a raw image.  It is a compressed small-raw of some sort so Adobe's normal demosaicking algorithms are not being employed, and Adobe is having to reverse engineer R, G, B channels from Y, Cb, Cr channels, so something may be non-optimal this conversion.
    Secondly, at least with this non-raw Y, Cb, Cr image, there are some Y pixels that have zero value in the file, so no matter what you do, other than adjusting the bottom of the tone curve above zero, they will be clipped.
    It also seems that the clipping indicator triangles are not affected by the Detail settings so turning off any noise-reduction or sharpening is required show you which pixels the clipping triangle is keying off of.
    Here is your image opened in an RawDigger which is a raw analysis program that indicates the Y channel does have a minimum value of 0:
    Here is a screenshot of LR with a very small crop on the shadowed background area above the performers, with the Detail settings turned off--no noise reduction or sharpening, and the Toning settings as bright as possible, and in that small crop area, there are a few black pixels that are highlighted blue if I turn on the clipping indicator, so it's not surprising, that with this image, at least, the black clipping indicator doesn't turn off very easily.  In this side-by-side, they have the same settings, but the Before image is without the clipping indicator and the After image is with the clipping indicator engaged so you can see the 4 pixels that are 0 in the tiny cropped area:
    Here is a DNG of the settings as in the above LR screenshot, other than the embedded preview that appears to be the entire image not the tiny cropped area:
    https://dl.dropboxusercontent.com/u/9905000/Dab_143378_smallcrop_maxedtoning.dng

  • What can be done to ensure that the Arabic text normally copied from Word to InDesign?

    What can be done to ensure that the Arabic text normally copied from Word to InDesign?
    At Word - normal Arabic text.
    At Indesign - wrong.

    See copy/pasted hebrew text is backwards and/or search the forum for "Arabic" (it has been asked numerous times before).

  • HT1338 When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed  and remains as if the computer is now Frozen. Mac book  Pro leopard operating system. What can I do to get past the freeze?

    When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed  and remains as if the computer is now Frozen. Mac book  Pro leopard operating system. What can I do to get past the freeze?

    Could the disk have failed?
    Can you hear it?
    Boot from the install DVD and see what Disk Utility says.

  • I connected the rocketfish mini display port but am only able to have audio through my computer.  I was able to successfully drag the video to the tv.  What can I do to hear through the tv?

    I connected the rocketfish mini display port but am only able to have audio through my computer.  I was able to successfully drag the video to the tv.  What can I do to hear through the tv?

    I HAVE T.V VOLUME!!!   Thank you sooooo much eww.  I was on my way thinking I would have to buy yet another type of cable.  : )  Again thanks!!!

  • My start Volume is full. I cleanded it to late. Now is he not starting correctly. The screen is white. what can i do to come to the Desktop?

    My Startvolume is full. I cleanded it to late. Now is he not starting correctly. The screen is white. What can i do to come to the Desktop?

    What do you mean by you "cleaned" it?
    Try booting into Safe Mode: http://support.apple.com/kb/HT1564
    If you can boot into Safe Mode, try clearing off some space while booted there.

  • The scroll back gesture to the previous page, even after i sign out of my email account or Facebook anyone can still be able to see the content in the accounts just by scrolling back using the gesture.

    the scroll back gesture to the previous page, even after i sign out of my email account or Facebook anyone can still be able to see the content in the accounts just by scrolling back using the gesture. how can i stop safari from showing the content of my accounts?

    Try calling Tech Support, they should be able to check to see if theres a lock and try to help you reset it, I had to call and get my account unflagged, for something that I didn't even do.

  • My iMac does not see the new Toshiba external drive in Finder or Disk Utility.  How can I get it to see the drive?

    My iMac does not see the new Toshiba external drive in Finder or Disk Utility.  How can I get it to see the drive?

    From the menu bar, select
               ▹ System Preferences ▹ Energy Saver ▹ Power Adapter  
    and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
    If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
    Check that the data cable is securely inserted at both ends.
    Try a different cable.
    If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
    If you're connecting it directly, try a different port.
    Disconnect all other devices on the bus, or as many as possible.
    Test the drive with another Mac. Test another drive with this Mac.
    If the drive is bus-powered, but has an AC adapter, connect the adapter.
    Start up in Recovery mode and launch Disk Utility. Is the drive recognized?
    Start up in Safe Mode and test.
    Reset the NVRAM.
    Reset the System Management Controller.
    If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive is malfunctioning.

  • What can be done to avoid getting the following error when trying to delete unused clips he operation could not be completed.  *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil

    what can be done to avoid getting the following error when trying to delete unused clips in Imovie 09 "the operation could not be completed.  *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil"  I use to get these type of error messages when trying to delete unsused clips from a large event 60 minutes or longer, but now I get this message when trying to reduce a 4 minute event.
    Also, does anyone know if there is a limit to the total amount of space that can be taken up by Projects in Imovie 09
    Thanks for any help

    Zachy,
    It goes something like this...
    Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
    Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

  • Good morning, my photoshop stopped working, it gives error when started, what can it be?  This is the message that appears: Unable to start the program it took a unexpected end of file  I hope answer

    Good morning, my photoshop stopped working, it gives error when started, what can it be?
    This is the message that appears:
    Unable to start the program it took a unexpected end of file
    I hope answer

    Could not initialize Photoshop because an unexpected end-of-file was encountered. | Mylenium's Error Code Database
    Mylenium

  • What can I do if I press the home and sleep botton at the same time and it doesnt take a picture?

    What can I do if I press the home and sleep botton at the same time and it doesnt take a picture? I want to take a picture of something in the internet and I cant! I used to be able to do it but now, it doesnt work anymore? What can I do?

    Press and hold the home button
    Quickly press and release the sleep button
    Release the home button
    You'll hear a shutter click
    The screenshot will be in your camera roll

Maybe you are looking for