What can be the reason for an iOS app not to open ?

I've built an app and it doesn't open .

I used the debugger and it told me the following :
terminate called after throwing an instance of 'NSException'
Program received signal: “SIGABRT”.
kill
quit

Similar Messages

ALL IP SLAs to dmVPN spokes give invalid RTT=1 . Nodes use NTP. What can be the reason for this?

IP SLA Measurements are invalid. RTT should be 20 to 60ms, but IP SLAs deliver RTT=1ms. This applies for UDP Jitter and UDP echo IP SLAs.
Nodes use NTP time.

you can use any router you want - I use a netgear others belkin - up to you.
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

I have an ipod shuffle 1st generation it will work if i connect it to my usb port in car or on computer but i can not get it to work using just headphones what coud be the reason for this

I have an ipod shuffle 1st generation. it will work ousing usb port in car or on computer but i can not get it to play using headphones. what would be the reason for this.

Sorry for the typos, I hope my message still gets across!

Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this....

Hi, I m using an iPhone 4 and my yahoo push email was working just fine but for the last few days I am experiencing some problem that is the emails are not getting pushed , I have to manually fetch the mails. So what could be the reason for this.....I have set the email setting to "push" mode. Moreover I can't edit the mail server address ....current it's on Yahoo SMTP server

Will it get rectified and restored...if so after how long. What could be the reason for such outage kindly share, as I am facing real problem because of this...

What would be the reason for sql server agent [MSSQLSERVER] service terminated unexpectedly?

What would be the reason for sql server agent [MSSQLSERVER] service terminated unexpectedly?
only below details found in error log
07:26:44.170 spid60
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:26:45.720 spid51
Configuration option 'Agent XPs' changed from 0 to 1. Run the RECONFIGURE statement to install.
07:26:45.730 spid51
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:28:57.840 spid64
Configuration option 'Agent XPs' changed from 1 to 0. Run the RECONFIGURE statement to install.
07:28:57.840 spid64
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
and below error on agent log
2014-01-01 07:26:28 - ? [131] SQLSERVERAGENT service stopping due to a stop request from a user, process, or the OS...
2014-01-01 07:26:43 - + [188] Scheduler engine timed out (after 15 seconds) waiting for 1 jobs(s) to stop
2014-01-01 07:26:44 - + [098] SQLServerAgent terminated (forcefully)
Rahul

What would be the reason for sql server agent [MSSQLSERVER] service terminated unexpectedly?
only below details found in error log
07:26:44.170 spid60
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:26:45.720 spid51
Configuration option 'Agent XPs' changed from 0 to 1. Run the RECONFIGURE statement to install.
07:26:45.730 spid51
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
07:28:57.840 spid64
Configuration option 'Agent XPs' changed from 1 to 0. Run the RECONFIGURE statement to install.
07:28:57.840 spid64
FILESTREAM: effective level = 3, configured level = 3, file system access share name = 'MSSQLSERVER'.
and below error on agent log
2014-01-01 07:26:28 - ? [131] SQLSERVERAGENT service stopping due to a stop request from a user, process, or the OS...
2014-01-01 07:26:43 - + [188] Scheduler engine timed out (after 15 seconds) waiting for 1 jobs(s) to stop
2014-01-01 07:26:44 - + [098] SQLServerAgent terminated (forcefully)
Rahul
Can you post the output of below query
select @@version.
If you are using SQl server express edition ,SQL server agent feature is not available.It seems from errorlog that you can start it but actually you cannot.But first confirm what is version and edition of your SQL server
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

What can be the reasons of diffrence in value generated using mb5l and f.01

what can be the reasons of difference in value generated using mb5L and f.01
when we use mb5L for stock taking and when we use f.01 for same purpose what could be the reasons if the value donot match. that i.e stock taking donot match in mm and fi.

Hi,mau be you doing smt wrong in selection screen?by the way,in mb5l acumulated balance!

What can be the reason behind getting the Dialer Detail

what can be the reason behind getting the Dialer Detail
CallResult = 2 "Error condition while dialing"

Sorry buddies, for bothering you, without providing enough details.
We are running Java based ERP for our client, with Oracle Application Server 10.1.3.1.
OS is Sun Solaris 10
Database is Oracle 11g
We found the following errors in /product/10.1.3.1/OracleAS_1/Apache/Apache/logs/error_log file.
[Mon Jun 8 11:01:41 2009] [error] [client <ipaddr>] [ecid: 1244439100:<server ip>:17034:0:70,0] mod_oc4j: request to OC4J iisapp:8890 failed: AJP error: bad header
[Mon Jun 8 11:11:36 2009] [error] [client <ipaddr>] [ecid: 1244439685:<server ip>:16312:0:2255,0] request failed: error reading the headers
[Mon Jun 8 13:25:52 2009] [warn] [client <ipaddr>] oc4j_socket_recvfull timed out
We have done the following changes recently
=> KeepAlive TImout changed to 5 secs from default 15
=> Changed the MaxPermSize to 512M in opmn.xml
=> Our Max Clients setting changed to 350 from default 150.
Can someone help us by providing the possible reasons for the occurence of said errors.
Regards,

I am passing range table from the method of ODATA Service to FM but In FM range table is becoming initial.What would be the reason for the same?

I am passing range table from the method of ODATA Service to FM but In FM range table is becoming initial.What would be the reason for the same?

Vinod, Can you share detail on how are you sending and how are you reading.

What may be the reasons for my iphone switching off all of a sudden and how do i prevent it?

what may be the reasons for my iphone switching off all of a sudden and how do i prevent it?

With the home page on display, in the menus select View, then Zoom and then Reset
For details on the zoom features see [[page zoom]] and [[text zoom]]

What could be the reason for continuous Full GC's during application startu

What could be the reason for continuous Full GC's during application (webapplication deployed on tomcat) startup?
JDK 1.6
Memory settings
-Xms1024M -Xmx1024M -XX:PermSize=200M -XX:MaxPermSize=512M -XX:+UseParallelOldGC
jmap output is below
Heap Configuration:
MinHeapFreeRatio = 40
MaxHeapFreeRatio = 70
MaxHeapSize = 1073741824 (1024.0MB)
NewSize = 2686976 (2.5625MB)
MaxNewSize = 17592186044415 MB
OldSize = 5439488 (5.1875MB)
NewRatio = 2
SurvivorRatio = 8
PermSize = 209715200 (200.0MB)
MaxPermSize = 536870912 (512.0MB)
Verbose GC logs
==========
0.194: [GC [PSYoungGen: 10489K->720K(305856K)] 10489K->720K(1004928K), 0.0061190 secs] [Times: user=0.01 sys=0.00, real=0.00 secs]
0.200: [Full GC (System) [PSYoungGen: 720K->0K(305856K)] [ParOldGen: 0K->594K(699072K)] 720K->594K(1004928K) [PSPermGen: 6645K->6641K(204800K)], 0.0516540 secs] [Times: user=0.10 sys=0.00, real=0.06 secs]
6.184: [GC [PSYoungGen: 262208K->14797K(305856K)] 262802K->15392K(1004928K), 0.0354510 secs] [Times: user=0.18 sys=0.04, real=0.03 secs]
9.549: [GC [PSYoungGen: 277005K->43625K(305856K)] 277600K->60736K(1004928K), 0.0781960 secs] [Times: user=0.56 sys=0.07, real=0.08 secs]
11.768: [GC [PSYoungGen: 305833K->43645K(305856K)] 322944K->67436K(1004928K), 0.0584750 secs] [Times: user=0.40 sys=0.05, real=0.06 secs]
15.037: [GC [PSYoungGen: 305853K->43619K(305856K)] 329644K->72932K(1004928K), 0.0688340 secs] [Times: user=0.42 sys=0.01, real=0.07 secs]
19.372: [GC [PSYoungGen: 273171K->43621K(305856K)] 302483K->76957K(1004928K), 0.0573890 secs] [Times: user=0.41 sys=0.01, real=0.06 secs]
19.430: [Full GC (System) [PSYoungGen: 43621K->0K(305856K)] [ParOldGen: 33336K->54668K(699072K)] 76957K->54668K(1004928K) [PSPermGen: 36356K->36296K(204800K)], 0.4569500 secs] [Times: user=1.77 sys=0.02, real=0.46 secs]
19.924: [GC [PSYoungGen: 4280K->128K(305856K)] 58949K->54796K(1004928K), 0.0041070 secs] [Times: user=0.01 sys=0.00, real=0.01 secs]
19.928: [Full GC (System) [PSYoungGen: 128K->0K(305856K)] [ParOldGen: 54668K->54532K(699072K)] 54796K->54532K(1004928K) [PSPermGen: 36300K->36300K(204800K)], 0.3531480 secs] [Times: user=1.19 sys=0.10, real=0.35 secs]
20.284: [GC [PSYoungGen: 4280K->64K(305856K)] 58813K->54596K(1004928K), 0.0040580 secs] [Times: user=0.01 sys=0.00, real=0.01 secs]
20.288: [Full GC (System) [PSYoungGen: 64K->0K(305856K)] [ParOldGen: 54532K->54532K(699072K)] 54596K->54532K(1004928K) [PSPermGen: 36300K->36300K(204800K)], 0.2360580 secs] [Times: user=1.01 sys=0.01, real=0.24 secs]
20.525: [GC [PSYoungGen: 4280K->96K(305856K)] 58813K->54628K(1004928K), 0.0030960 secs] [Times: user=0.00 sys=0.00, real=0.00 secs]
20.528: [Full GC (System) [PSYoungGen: 96K->0K(305856K)] [ParOldGen: 54532K->54533K(699072K)] 54628K->54533K(1004928K) [PSPermGen: 36300K->36300K(204800K)], 0.2311320 secs] [Times: user=0.88 sys=0.00, real=0.23 secs]
20.760: [GC [PSYoungGen: 4280K->96K(305856K)] 58814K->54629K(1004928K), 0.0034940 secs] [Times: user=0.00 sys=0.00, real=0.00 secs]
20.764: [Full GC (System) [PSYoungGen: 96K->0K(305856K)] [ParOldGen: 54533K->54533K(699072K)] 54629K->54533K(1004928K) [PSPermGen: 36300K->36300K(204800K)], 0.2381600 secs] [Times: user=0.85 sys=0.01, real=0.24 secs]
21.201: [GC [PSYoungGen: 5160K->354K(305856K)] 59694K->54888K(1004928K), 0.0019950 secs] [Times: user=0.00 sys=0.00, real=0.00 secs]
21.204: [Full GC (System) [PSYoungGen: 354K->0K(305856K)] [ParOldGen: 54533K->54792K(699072K)] 54888K->54792K(1004928K) [PSPermGen: 36300K->36300K(204800K)], 0.2358570 secs] [Times: user=0.98 sys=0.01, real=0.24 secs]
21.442: [GC [PSYoungGen: 4280K->64K(305856K)] 59073K->54856K(1004928K), 0.0022190 secs] [Times: user=0.01 sys=0.00, real=0.01 secs]
21.444: [Full GC (System) [PSYoungGen: 64K->0K(305856K)] [ParOldGen: 54792K->54792K(699072K)] 54856K->54792K(1004928K) [PSPermGen: 36300K->36300K(204800K)], 0.2475970 secs] [Times: user=0.95 sys=0.00, real=0.24 secs]
21.773: [GC [PSYoungGen: 11200K->741K(305856K)] 65993K->55534K(1004928K), 0.0030230 secs] [Times: user=0.01 sys=0.00, real=0.01 secs]
21.776: [Full GC (System) [PSYoungGen: 741K->0K(305856K)] [ParOldGen: 54792K->54376K(699072K)] 55534K->54376K(1004928K) [PSPermGen: 36538K->36537K(204800K)], 0.2550630 secs] [Times: user=1.05 sys=0.00, real=0.25 secs]
22.033: [GC [PSYoungGen: 4280K->96K(305856K)] 58657K->54472K(1004928K), 0.0032130 secs] [Times: user=0.00 sys=0.00, real=0.01 secs]
22.036: [Full GC (System) [PSYoungGen: 96K->0K(305856K)] [ParOldGen: 54376K->54376K(699072K)] 54472K->54376K(1004928K) [PSPermGen: 36537K->36537K(204800K)], 0.2507170 secs] [Times: user=1.01 sys=0.01, real=0.25 secs]
22.289: [GC [PSYoungGen: 4280K->96K(305856K)] 58657K->54472K(1004928K), 0.0038060 secs] [Times: user=0.00 sys=0.00, real=0.00 secs]
22.293: [Full GC (System) [PSYoungGen: 96K->0K(305856K)] [ParOldGen: 54376K->54376K(699072K)] 54472K->54376K(1004928K) [PSPermGen: 36537K->36537K(204800K)], 0.2640250 secs] [Times: user=1.07 sys=0.02, real=0.27 secs]
22.560: [GC [PSYoungGen: 4280K->128K(305856K)] 58657K->54504K(1004928K), 0.0036890 secs] [Times: user=0.01 sys=0.00, real=0.01 secs]
22.564: [Full GC (System) [PSYoungGen: 128K->0K(305856K)] [ParOldGen: 54376K->54377K(699072K)] 54504K->54377K(1004928K) [PSPermGen: 36537K->36536K(204800K)], 0.2585560 secs] [Times: user=1.08 sys=0.01, real=0.25 secs]
22.823: [GC [PSYoungGen: 4533K->96K(305856K)] 58910K->54473K(1004928K), 0.0020840 secs] [Times: user=0.00 sys=0.00, real=0.01 secs]
22.825: [Full GC (System) [PSYoungGen: 96K->0K(305856K)] [ParOldGen: 54377K->54377K(699072K)] 54473K->54377K(1004928K) [PSPermGen: 36536K->36536K(204800K)], 0.2505380 secs] [Times: user=0.99 sys=0.01, real=0.25 secs]
23.077: [GC [PSYoungGen: 4530K->32K(305856K)] 58908K->54409K(1004928K), 0.0016220 secs] [Times: user=0.00 sys=0.00, real=0.00 secs]
23.079: [Full GC (System) [PSYoungGen: 32K->0K(305856K)] [ParOldGen: 54377K->54378K(699072K)] 54409K->54378K(1004928K) [PSPermGen: 36536K->36536K(204800K)], 0.2320970 secs] [Times: user=0.95 sys=0.00, real=0.23 secs]
24.424: [GC [PSYoungGen: 87133K->800K(305856K)] 141512K->55179K(1004928K), 0.0038230 secs] [Times: user=0.01 sys=0.01, real=0.01 secs]
24.428: [Full GC (System) [PSYoungGen: 800K->0K(305856K)] [ParOldGen: 54378K->54950K(699072K)] 55179K->54950K(1004928K) [PSPermGen: 37714K->37712K(204800K)], 0.4105190 secs] [Times: user=1.25 sys=0.17, real=0.41 secs]
24.866: [GC [PSYoungGen: 4280K->256K(305856K)] 59231K->55206K(1004928K), 0.0041370 secs] [Times: user=0.01 sys=0.00, real=0.00 secs]
24.870: [Full GC (System) [PSYoungGen: 256K->0K(305856K)] [ParOldGen: 54950K->54789K(699072K)] 55206K->54789K(1004928K) [PSPermGen: 37720K->37719K(204800K)], 0.4160520 secs] [Times: user=1.12 sys=0.19, real=0.42 secs]
29.041: [GC [PSYoungGen: 262208K->12901K(275136K)] 316997K->67691K(974208K), 0.0170890 secs] [Times: user=0.11 sys=0.00, real=0.02 secs]
Edited by: 807460 on Feb 6, 2011 8:28 PM

What do you see if you use the least number of options you need to start the application. I would try just
-mx1024M -XX:MaxPermSize=512M I would only add options which appear to improve performance.

What could be the reason for Crawl process to take long time or get in to a hung state.

Hi All,
What could be the reason for Crawl process to take long time or get in to a hung state? Is it something also related to the DB Server resources crunch? Does this lead to Index file corruption?
What should be the process to be followed when index file is corrupted? How do we come to know about that?
Thanks in Advance.

"The crawl time depends on what you are crawling -- the number of items, the size of the items, the location of the items. If you have a lot of content that needs to be crawled, it will take much time".
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f4cad578-f3bc-4822-b660-47ad27ce094a/sharepoint-2007-crawl-taking-long-time-to-complete?forum=sharepointgeneralprevious
"The only clean and recommended way to recover from an index corruption is to completely rebuild the index on all the servers in the farm."
http://blogs.technet.com/b/victorbutuza/archive/2008/11/11/event-id-4138-an-index-corruption-was-detected-in-component-shadowmerge-in-catalog-portal-content.aspx
Whenever search index file got corrupted it will got the details to Event logs
http://technet.microsoft.com/en-us/library/ff468695%28v=office.14%29.aspx
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

Fonds look great. The moment I publish it all looks different. Color, size... What can be the reason?

iWeb worked just fine. But now I have a problem after publishing. It all looks fine but going on Safari changes all. Any idea what can be the problem?

You would need to post the URL to the published site to get help.

What could be the reason for this error file

Hi,
What could be reason for this error file, the content of the error file is :
Compiling INSERT-PROCEDURE trigger on IOTDISPUTE_FILES data block...
No compilation errors.
Compiling UPDATE-PROCEDURE trigger on IOTDISPUTE_FILES data block...
No compilation errors.
Compiling DELETE-PROCEDURE trigger on IOTDISPUTE_FILES data block...
No compilation errors.
Compiling LOCK-PROCEDURE trigger on IOTDISPUTE_FILES data block...
No compilation errors.
Compiling INSERT-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Compiling UPDATE-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Compiling DELETE-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Compiling LOCK-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Created form file X:\IOT\IOT_SupportingSystem\Forms\IOTRAP.fmx
I am getting this error while compiling a form with DML sources are Database Procedure.
Thanks in advance.
Rizly

Hi,
Sorry for the delayed response. These informations are generated in the FormName.err file. If its not the error, then why its not generating for other forms. As I mentioned earlier, this fom has DML sources by the Database Procedures, that could be the reason ?, this is my first project in Forms.
The content of the IOTRAP.err file:
Compiling DELETE-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Compiling LOCK-PROCEDURE trigger on IOTDISPUTEDETAILS data block...
No compilation errors.
Created form file X:\IOT\IOT_SupportingSystem\Forms\IOTRAP.fmx
Thanks in advance.
Rizly

TS4148 on my iphone network loosing and no service appears .what can be the reason

hello
on 2g network selected condition all of sudden network signal missing and no service displays .what can be reason please

i have an iphone 5 its practically new and after a week or so i am using my iphone and suddenly from nowwhere a purple spot comes out on the bottom right corner of my screen i havent dropped it or anything can someone help me????

A new top level site was created successfully but won't launch. What can be the cause for this?

A site collection was created with the URL intranet.contoso and it was added to the DNS as intranet.contoso. The top-level site was created successfully after that with the URL being
http://intranet.contoso/main but it is not launching and the following is the error message -
This page can't be displayed.
This will be a production environment so disabling the security loopback will not be an option. Any suggestions?
Many Thanks,

I can connect only to the SharePoint Central Administrator from the client computer but not the top level site.
The error i'm getting is This page can't be displayed.
Make sure the web address http://contonsoportalis correct
Look for the page with your search engine
Refresh in a few minutes
Fix connection problems - When clicked the following shows up "Make sure the computer or device is turned on and connected to the network" Windows can't find contosoportal. If the computer or device you are trying to reach is nearby,
make sure it is turned on and connected to the network. Otherwise contact your network administrator for assistance.
The DSN already had a host created for an intranet that is running SharePoint 2010 called intranet so I created a new host (A and AAA) named it Portal insert the ip address of the new sharepoint 2013 server but it still didn't work.
This is the configuration shown in the DNS
Host A Tab -
Host (uses parent domain if left blank)
Portal.contoso.local
IP address: 192. X.X.X for the SharePoint Server
( Should I create a CNAME instead of a new host for the portal? )
I added the host names in the register but it still does not work....
It's a virtual environment running on top of hyper V - One server for SharePoint another for SQL and both joined to the DC.

What can be the reason for an iOS app not to open ?

Similar Messages

Maybe you are looking for