What can cause a cpu overtemp apart from the obvious.

I have played about with my Mac Pro 1.1 for three days now because it cut out all the time with the cpu overtemp LED's coming on. I have taken it apart and cleaned out the dust about 4 times now.Can this be caused by other things, for example, overheating of the pcie, or having too many drives and peripherals on. I had 4 drives, 3 usb's loaded, a nvidia 7300gt for mac osx and a GTX 460 for windows and 4 gig of memory in place when it all started. I did notice that the pcie fan really kicked in on some windows games.
I have now taken out the gtx 460, and replaced it with the inferior ATI 4850, 1 gig of ram along with the riser and am thinking of taking out one of the hard drives. It seems to be working fine now. Could it have been bad memory or just drawing on the power supply too much?

I would run the Apple Hardware Test. It could be a failed fan or sensor.

Similar Messages

Can I listen to audiobooks apart from the Music app?

Is there any way for me to listen to my iTunes audiobooks apart from the Music app?
The music app is annoying. It can't remember the playback position of the audiobook files.
I used to change the books into podcasts and then use the podcasts app but now it wouldn't sync .
I wish Apple will make a seperate Audiobooks app...

If they are not drm and or if amazon Got an app which play them

What can cause a sales order to have the status "To Be Costed"?

Dear Experts,
We are not very proficient in SD/FICO config and we are facing this problem. We are creating debit/credit note and after we saved, sometimes the system status becomes "To be costed". This prevents billing to be done.
Sometimes using the same data to create another debit/credit note, the issue does not occur.
We are not sure why the same data of the sales order created sometimes has that issue and sometimes it does not.
1) What are the factors that cause the status "To be costed" to be assigned to the sales order?
2) We don't want the status "To be costed" to appear. What can we do to do this at sales order type level?
3) We are suspecting might be because of the availability check. Does this affect the status as well?
If there is, we do not want to change the data for this material at material level. Is there a way to control by sales order type level? Thanks.
Regards,
Janet

Hi,
Please check if the material you are trying to invoice has the cost estimate released properly and which is updated in the material master as the planned price.
Good Luck!!!!!
Thanks and Regards,
Bhuvaneswari.S

What can cause "Would you like to update the saved password?" When there is no password saved?

Lately, I am seeing this prompt for "Would you like to update the saved password?" when I log into password protected sites, where there is actually no saved password. Like the Bank of America site, I don't want the browser to save the password. What would cause this? I can just envision me clicking YES to update the saved password, then I have just somehow sent my password to hackers. Is this a known issue, or am i looking at a possible security breach here?

Firefox shows this notification if you use the Password Manager to fill the name and password and you change/modify the password that was previously saved. This can also happen if there is a script running that modifies the password field.
You may disable the remember password incase it's needed by doing the foll:
Tools-> Options -> Security -> Uncheck remember passwords for site.

I recently deleted some old backups from my external hard drive and now I can't get them out of the trash can. What can I do to remove them from the trashcan?

How do i delete a backup file from the trashcan?

Were these old backups part of Time Machine?
If yes, check this FAQ,
http://pondini.org/TM/E6.html

Trash will not delete from trash folder! What can cause this effect?

Trash will not delete from trash folder! What can cause this effect?

u can actually force it to delete, oviously i assume you dont have the application or data etc open neware else?
try restarting your computer, go into finder close all your open applications etc, servers, **** even clear your data in your web browser, do a disk utility check and verify your drives and repair em if nessicary.
as chamar suggested look at http://www.thexlab.com/faqs/trash.html
i had the same problem before but with a good 5-10 minutes of googling i was able to solve it..
best of luck

Photoshop CS4 for Mac What can cause the error: Plug-in failed to load - NO VERSION

With Photoshop CS4 for Mac I install the Kodak Plug-in DIGITAL GEM Airbrush Professional v2.1.0. When Photoshop starts I get an error:
Plug-ins that failed to load:
   DIGITAL GEM Airbrush Professional v2.1.0 NO VERSION - - from the file “DigitalAIRProv2.plugin”Flash:
   Connections
   Kuler
This plug-in works fine on my Mac Pro with Photoshop CS4 and OS 10.6 but fails on a new Macbook Air.
Reinstalling the plug-in did not make any difference. What can cause this error?

Thanks Chris, That was my first thought too but this same plug-in works on another installation of CS4. This is a Mac installation and the plug-in is Universal so it should work. Is there any other possible cause for this error? Would Photoshop refuse to load a plug-in in a low memory situation?
Also, The Flash extensions:Connections and Kuler are working OK, I just copied a little more out of the System Info report than I needed to.

HT204492 can someone help me ? My iMac remote control isn't working properly , well all buttons are working apart from the MENU button !! Can anyone shed any light on this ?

can someone help me ? My iMac remote control isn't working properly , well all buttons are working apart from the MENU button !! Can anyone shed any light on this ?

As this is the forum for PPC (pre-2006, non Intel) iMacs I assume that is what you have.
Try pairing the remote again:
How to Pair your Remote to your Mac:
http://support.apple.com/kb/HT1619?viewlocale=en_US

Whats the Actual use of the Setup table apart from the Full/Init loads

Hi guru's
could u explain whats the Actual use of the Setup table apart from the Full/Init loads in Lo Extraction

Hello Guru,
The Setup table is used mainly for storing the Historical data whereas the new and changed records will be maintained in the Update table.
By storing the Historical data in the setup table you don't need to disturb the Application table anymore.
Please go through the following blogs
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/vikash.agrawal/blog/2006/12/18/one-stop-shop-for-all-your-lo-cockpit-needs
https://websmp201.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002719062002E
Hope it helps
Thanks,
Chandran

I cannot control the sensor on my Mac, it moves by itself, and opens different pages. What can cause this problem? please help me.

I cannot control the sensor on my Mac, it moves by itself, and opens different pages. What can cause this problem? please help me.

There are several possible causes for this issue. Take each of the following steps until it's resolved.
1. Follow the instructions in this support article.
2. Reset the System Management Controller.
3. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
4. A swollen battery in a MacBook Pro or Air can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced.
5. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
6. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
7. If none of the above applies, or if you have good reason to think your computer is being controlled remotely, remove it from the network by turning off Wi-Fi, disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop immediately, you should suspect an intrusion.

IPod Touch not recognized by ITunes, but IPhone is. What can cause only one device to not be recognized?

I have tried reinstalling ITunes and resetting my IPod Touch. The computer recognizes the IPod Touch as a connected device, but ITunes doesn't. However, ITunes will recognize other devices that I plug in with the same usb cord. ITunes diagonistics only says that no device is plugged in whenever the IPod Touch is plugged in. What can cause this combination of problems, and how could I get around it?

If you have iTunes 11 on the computer and are using the same cable that works with the iPhone then:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Try on another computer
- Make an appointment at the Genius Bar of an Apple store since it appears you have a hardware preoblem
Apple Retail Store - Genius Bar

Every time one of my email addresses doesn't work on my mail app, due to wrong password or whatever, it deletes all of the contacts form my phone. What can I do to stop this from happening?

Every time one of my email addresses doesn't work on my mail app, due to wrong password or whatever, it deletes all of the contacts form my phone. What can I do to stop this from happening?
I have tried deleting the account and it deletes all my contacts. I have verizon and even using back up assistant, it says the contacts are there but they aren't. The only way i can find a contact is if I start to type a name in and new text but once i sent the new text, the name disappears and it just shows the number. Siri nor the address book don't recognize any contacts at all.

I cant find any reciept in my email or in my husbands email. I am going to attempt to call and speak to someone who can help me because this was not my fault except trying to be normal and update my phone!

Myfi is running very slow, what can cause this?

Myfi is running very slow, what can cause this?

Either a service problem in your area or a glitch/hardware problem on the Jetpack.
To determine service problems simply travel to a different area and rerun your speed test. If the problem persists then its a glitch/hardware problem on the Jetpack. If not then its a service problem in that particular area that would need to be addressed by VZW or improved with the usage of antennas/boosters.
When performance testing be sure to use a tool that is universal to better illustrate the problem. For example a common utility is to speed test using www.speedtest.net. Run this test a few times to build an average and then perform the same tests in a different location or after changing something around.

HT204266 I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the di

I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the differences between countries' iTunes offerings? Does one really need an address and a credit card for any country to be able to access that countries iTunes store? Why these restrictions?

You cannot.
You cannot use another countrys itunes store.
You must be physically locates inside the borders of a country to use that countrys itunes store and a credit card issued in that country with a valid billing address in that country.
The owners of the distribution rights of movies/music/etc differ by country. These distributors decide who can sell their content in that country.
Buy from another source if your countrys itunes store does not carry somehting that you want.

Mac pro monitor has a shadow in its center. Does anybody know what can cause that?

Last day my mac pro showed a shadow in its display center. Does anybody know what can cause?
I use to use it a litle, cause i'm new on macs and still use pc based on windows.

Who made the monitor? Is it even Apple?
If you have the right connections, try swapping out the monitor with your PeeCee monitor and see if the problems stays or goes. But does sound like a monitor issue. But then, hard to know what you mean by shadow...

What can cause a cpu overtemp apart from the obvious.

Similar Messages

Maybe you are looking for