What can I do about error -50 in a video with only short clips (less than 1 sec)?
I get Error -50 when trying to export a music video with lots of short clips I just made in imovie 8.0.6. After googleing the problem i realize that its probably the short clips (under 1 sec) that are the problem.
Is there any way to get around this?
Would really appriciate the help!!!
As a test Depress an hold the option key while launching iPhoto - create a new test library and import a few photos into it - report back with the results and if this problem repeats in the new test library
LN
Similar Messages
-
TS3297 What can I do about error 42408?
What can I do about error 42408? I can't download my purchased and matched music from the store.
Ruleo,
It is common to have a reading on a disconnected channel. Generally speaking for measurement devices, un-connected voltage inputs tend to float around to either the positive or negative supply rail of the measuring device and current inputs will float around the 0 mA range. This is due both to device design and the real world behavior of components as opposed to the ideal behavior model. Some devices such as the FP-TC-120, will have circuitry to cause un-connected outputs to go to a specific level (in the case of the FP-TC-120, unconnected outputs will always read full scale of the range).
When you say you are getting a reading on that channel, is it a reading that is close to mininum scale, or is it a reading in the middle of the
scale, i.e. 10.2 mA? If the channel is not reading close to minimum scale, it is possible that the channel has been damaged. On the FP-AI-111, you can use a DMM to measure between the Iin pin and any of the C or Com pins. First disconnect any external wiring to the channel, then hook in the DMM. The resistance (within the accuracy of the DMM) should be exactly 100 Ohms. If the resistance is greater than 100 Ohms, then the channel was damaged by an over-current condition that exceeded the published specifications of the module (30 mA). In that case, the module will have to be sent to National Instruments for repair.
Regards,
Aaron -
i made the update for IOS 6 with the latest version of iTunes and it downloaded the latest version of IOs 6 after that, when it was trying to intall the update it gave me an error ( error (6) ) , now my iPhone is in the stage where it shows me a cable and the itunes logo. what can i do to fix it ?
Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
TS3274 What can I do about the constant buffering during videos?
Suddenly all of my videos are buffering or freezing. My iTunes purchased and rental movies included. What can I do to resolve this. I need this action for work. This is terrible! Thanks for any advice. I will try anything at this point.
Diavonex is not an Apple employee - none of us that post here are employed by Apple so we can't "just fix" this issue for you - or for anybody else that is having this problem. Diavonex offered a suggestion - that's all.
Have you tried any of the basic stuff, resetting the iPad, closing all apps in the task bar and restarting, clearing Safari if you are having the problem viewing video content on the web ....?
I have a very fast Internet connection speed and this happens to me once in a while, it even happens on my new MacBook. It certainly should not happen all of the time, but it does happen. I know that the further I am away from my WiFi router, the worse the issue can be. If I try to stream a video from HBO GO for example and I am sitting out on my back deck, the video may begin to buffer on me.
So why don't you just offer the help to Gia and Brian, instead of posting that it is a widespread problem? What have you done to try to fix the issue?
@Gia and Brian.....
I wish that I had a better answer for you, but I don't. Have you tried rebooting your router and/or cable modem? Every once in a while that simple little fix can work wonders. -
the details of the problem are as I put in the question: I cannot access the Talk talk tiscali website because when I log in I get "error searchapp". This does not occur in Outlook Express but I prefer Firefox.
Greetings,
What version of the Mac OS and what version of iCal are you running?
Are you using MobileMe calendars (or any other server based calendars like Google) in your iCal?
While you answer those questions you can try the following troubleshooting:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
Once the computer is back up and running open iCal and test.
Hope that helps. -
What can I do about error codes 33487 and 33443 from FieldPoint.
I am using the AI-111 current module with FP 1600 network module. I checked all wiring and connections and I can't find what is causing the problem.
Ruleo,
It is common to have a reading on a disconnected channel. Generally speaking for measurement devices, un-connected voltage inputs tend to float around to either the positive or negative supply rail of the measuring device and current inputs will float around the 0 mA range. This is due both to device design and the real world behavior of components as opposed to the ideal behavior model. Some devices such as the FP-TC-120, will have circuitry to cause un-connected outputs to go to a specific level (in the case of the FP-TC-120, unconnected outputs will always read full scale of the range).
When you say you are getting a reading on that channel, is it a reading that is close to mininum scale, or is it a reading in the middle of the
scale, i.e. 10.2 mA? If the channel is not reading close to minimum scale, it is possible that the channel has been damaged. On the FP-AI-111, you can use a DMM to measure between the Iin pin and any of the C or Com pins. First disconnect any external wiring to the channel, then hook in the DMM. The resistance (within the accuracy of the DMM) should be exactly 100 Ohms. If the resistance is greater than 100 Ohms, then the channel was damaged by an over-current condition that exceeded the published specifications of the module (30 mA). In that case, the module will have to be sent to National Instruments for repair.
Regards,
Aaron -
What can I do about error code w_ADEPT_CODE_EXPIRED
I cannot move library books to Digital Reader Eror code W_ADEPT_CODE_EXPIRED comes up. How do I fix this?
One possible reason is that the loan really has expired.
One is that your timezone, time or daylight settings are not correct.
One is that your timezone, time and daylight settings are correct, but the library has different ones and only wants to talk within timezone. -
The middle button on my iphone 4 doesn't work properly what can I do about it?
the middle button on my iphone 4 doesn't work properly what can I do about it?
Make an appointment with the genius and bring to the Apple Store.
-
While importing a CD into my iTunes library I kept getting the following error message- iTunes cannot be saved- An unknown error occurred (-54). what does this error mean and what can I do about it??
The CD I imported (in the above post) is now not in my iTunes library. Any help would be appreciated .
-
When I try to connect the Air with my iPhone to create an Hotspot, it drops the connection and gives an error message in the iPhone saying that the device (MacBook Air) is not supported. What can i do about it?
The problem has been fixed with the most recent OS X software update.
-
What can I do about this:
After upgrading to firefox 6, I get this error.
When I click to open Firefox, A box open with the following error:
JAVASCRIPT Application
TypeError: Components.classes[cid] is undefined?
After I click close on the box, then Firefox will start. I really just want to get the error fixed so that when I want firefox open, I don't have to see this box anymore.You need to figure out which add-on is causing that error and disable it until the developer of that add-on fixes it. There may be an error message about that in the Error Console, accessed through the Web Developer menu item or through {Ctrl + Shft + J}.
Also see this: <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes -
I've recently received an error message from Time Machine that my Macbook Pro's sparsebundle is in use. What is this and what can I do about it?
This is asked at least 5-6 times a day here.
Look at the right hand column.. more like this.
It is a bug in Mountain Lion.
Read C12 http://pondini.org/TM/Troubleshooting.html
But the fast solution.. unplug the TC.. count to 10.. plug it back in. -
Hello,
Cannot install Adobe Application Manager. I get error message: "Installer failed to initialize". What can I do about this?if mac:
go to HD>library>application support>adobe>caps and rename the caps folder.
go to USER library>application support>adobe>OOBE and rename OOBE folder
install Adobe application manager from below link.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774 -
ipad3 running iOs 7 trying to update to 7.0.2 keep tting failed due to error like 9 times. Updated iPad mini and 2 iPhone 4s, no problem.
Whats up? And what can I do to update?Try and update with iTune (computer)
-
What does it mean when one gets a message that Time Capsule or its disks are failing?
What can be done about it, if it's a reparable situation?Thanks for the info.
I will look into buying a large external hard drive as an option. But given that I can't seem to back up anyway, is there another option other buying another Time Capsule? Do any of the external hard drives have embedded intelligence that allows them to work off my other router.
This is the log file from my TC's last attempt at backing up:
Starting standard backup
Attempting to mount network destination using URL: afp://Xxx@Xxx._afpovertcp._tcp.local/Xxx's%20Tim
Mounted network destination using URL: afp://Xxx@Xxx._afpovertcp._tcp.local/Xxx's%20Tim
Failed to attach to image: /Volumes/Xxx's Tim-1/Xxx’sMacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image /Volumes/Xxx's Tim-1/Xxx’sMacBook Pro.sparsebundle (DIHLDiskImageAttach returned: 35)
Mount failed... waiting 60 seconds and trying again.
Ejected Time Machine network volume.
Attempting to mount network destination using URL: afp://Xxx@Xxx._afpovertcp._tcp.local/Xxx's%20Tim
Mounted network destination using URL: afp://Xxx@Xxx._afpovertcp._tcp.local/Xxx's%20Tim
Failed to attach to image: /Volumes/Xxx's Tim-1/Xxx’sMacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image /Volumes/Xxx's Tim-1/Xxx’sMacBook Pro.sparsebundle (DIHLDiskImageAttach returned: 35)
Mount failed... waiting 60 seconds and trying again.
Ejected Time Machine network volume.
Attempting to mount network destination using URL: afp://Xxx@Xxx._afpovertcp._tcp.local/Xxx's%20Tim
Mounted network destination using URL: afp://Xxx@Xxx._afpovertcp._tcp.local/Xxx's%20Tim
Failed to attach to image: /Volumes/Xxx's Tim-1/Xxx’sMacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
Failed to mount disk image /Volumes/Xxx's Tim-1/Xxx’sMacBook Pro.sparsebundle (DIHLDiskImageAttach returned: 35)
Giving up after 3 retries.
Backup failed with error: 31
Ejected Time Machine network volume.
[End]
As you can see, not a very happy outcome. I would appreciate any additional ideas you might have about resolving this.
Regards,
Maybe you are looking for
-
HRSSA Email Notifications shows Junk Characters for Arabic
We have R12 Oracle ERP RDBMS : 11.1.0.7.0 Oracle Applications : 12.1.1 We are getting email notifications from Self Service (HRSSA), it shows junk characters in the body of the email, wherever we have arabic characters. Where as in Subject of the ema
-
TS2446 I can't activy my IP4 S/N 7S******A4S. Please help me
I can't activy my IP4 S/N 7S******A4S. Please help me. Thanks! <Edited By Host>
-
Connections with third-party source control - will they be retained?
I have RoboHelp installed on my hard drive. Company is swapping out my hard drive and I will need to reinstall it. All my RH projects are connected to a third-party source control mechanism (Visual SourceSafe). When I reinstall RH, will the connectio
-
Why can't I use a Bluetooth connection to Use iPhone to control Keynote on iPad?
The help function in Keynote for iPad explains how this should work, but it doesn't!
-
Change of module error in Lightroom
I downloaded a trial of lightroom but could not use it due to there being a change of module error ..... so i decided ton buy the product thinking that this may fix the problem but it hasn't .....if someone could give me a step by step guide to resol