What can i do for accessibility setting restore

i have changed setting in accessiblility
now my phone working in only sepack.
so what can i do for same

What do you mean by wont work?

Similar Messages

  • I just updated my phone to the latest version.... but when restarting it asked for a passcode. I haven't had a passcode in  at least six months and don't remember what my old one was. What can I do to access my phone?

    I just updated my phone to the latest version.... but when restarting it asked for a passcode. I haven't had a passcode in  at least six months and don't remember what my old one was. What can I do to access my phone?

    Never mind was thinking a different brand
    You used a backup on iTunes?

  • TS1363 What can I do for an Ipod that won't update, won't allow you to eject it, and can't reset either?

    What can I do for an Ipod that won't update, won't allow you to eject it, and can't reset either? I can simply unplug it from my pc and after a while it runs down and works fine after a charge. Wanting to clear data and sell but nothing seems to work. The ipod was originally set up on a different computer and with a different I tunes account as well. Would that make any difference?

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    Next
    Try disabling the computer's antivirus and firewall.
    - Next try the manual install method of:
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
    Place the iPod in recovery mode after the firmware download is complete and then restore using the instructions in the article. Sometimes recovery mode timeouts and returns to disabled before the firmware download is complete.
    - Then try on another computer

  • HT4623 what can be done for the ipad that is making people dizzy and having headaches?

    what can be done for the ipad that is making people dizzy and having headaches?

    Go to settings>general>accessibility>reduce motion> turn on.

  • I deleted my photos and I did't wnt to do it ... What can I do for recover it?

    I deleted my photos and I did't want to do it ... What can I do for recover it?

    - If they are in an iPod backup then restore from that backup. See the restore topic of:
    iOS: How to back up
    - If they are in the iTunes backup then get them from the backup by:
    Recover iPhone, iPad or iPod photos from backups with Picturescue
    - If you used PhotoStream then try getting them from your PhotoStream. See that topic of:
      iOS: Importing personal photos and videos from iOS devices to your computer

  • I cannot click on certain links in emails. What can I do to access these links? Thanks

    # Question
    I cannot click on certain links in emails. What can I do to access these links? Thanks

    Try closing the App Store app completely and see if it works properly when you re-open it : from the home screen (i.e. not with App Store 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the App Store app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • I'am using iphone 5 i tried to update the ios 8.0.2 using the shift key in itunes update @ windows 8 i have the file which i downloaded, but it says that firmware version is not compatible. what can i do for it . help me friends

    i'am using iphone 5, i tried to update the ios 8.0.2 using the shift key in itunes update @ windows 8 i have the file which i downloaded, but it says that firmware version is not compatible. what can i do for it . help me friends

    Hello vinoth1986,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning update issues:
    If you can't update or restore your iPhone, iPad, or iPod touch
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • HT4561 when i make this it says error! what can I do for that ?

    When i click the apple icon, then software update and install (mac os x update combined)
    and when it finish it says "error"..
    what's the problem what can i do for that!!

    Hello Lexiiijadee
    What was the error code? Look at the first article to help you figure out what to do for that error code. If you need help with getting your iPhone into recovery mode, the second article will help with that.
    Resolve iOS update and restore errors
    http://support.apple.com/kb/TS3694
    If you can't update or restore your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT1808
    Regards,
    -Norm G.

  • Hi, I have 8 GB apple ipod. I connected to Linux PC, afterwords ipod stopped playing music. please suggest me, what can I do for rectifying this issue.

    Hi.
    Hi, I have 8 GB apple ipod. I connected to Linux PC, afterwords ipod stopped playing music. please suggest me, what can I do for rectifying this issue. Please help me.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Unsync all music and resync
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • My iphone 4s is updated to ios7.1 after that it shutsown when i insert the sim.if ther is no sim it was working properly.what can i do for this

    My iphone 4s is updated to ios7.1 after that it shutsown when i insert the sim.if ther is no sim it was working properly.what can i do for this

    Hi Ravihara,
    Thanks for visiting Apple Support Communities.
    If your iPhone is not working with a SIM card inserted, I recommend these troubleshooting steps:
    Try turning iPhone off and then on again.
    Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
    Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
    Restore the iPhone.
    If you still are unable to resolve this issue, contact Apple support for further assistance.
    From:
    iPhone: Troubleshooting No SIM
    http://support.apple.com/kb/ts4148
    Best Regards,
    Jeremy

  • I have removed the passcode from my ipad but still it is getting locked after sometime what can be reason for this?

    I have removed the passcode from my ipad but still it is getting locked after sometime what can be reason for this?

    Can you pls guide that when I am restoring my ipad from itunes do i need to restore as new or from backup?????
    Also is this problem  realted to using same apple id for two ipad..... Pls help and regarding ur suggesting of messing with my ipad , I will keep a check ..

  • Centre button is not working properly in my iphone . . what can i do for that ?

    centre button is not working properly in my iphone . . what can i do for that ?

    Get it serviced.

  • HT4437 hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?

    hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?

    See
    http://support.apple.com/kb/TS4215

  • Help me plz.. i,ve got a apple i phone 4 and i'm the 2 owner of it and i dont have it's apple id and passward for it and 1st owner doesnt know it too so what can i do for this plz help me....

    help me plz.. i,ve got a apple i phone 4 and i'm the 2 owner of it and i dont have it's apple id and passward for it and 1st owner doesnt know it too so what can i do for this plz help me....

    Neither can we.  Only the original owner can help you, surely he/she can reset their password.

  • What can i do for removing SINGLE in this select query??

    What can i do for removing SINGLE in this select query given below and also NOT USE 'ENDSELECT'??
    I have defined g_t_zv7_cachemapping as following ::
    DATA : BEGIN OF g_t_zv7_cachemapping OCCURS 0,
             kostl LIKE zv7_cachemapping-kostl,
             END OF g_t_zv7_cachemapping.
    SELECT SINGLE kostl FROM zv7_cachemapping INTO g_t_zv7_cachemapping
               WHERE  auart = g_t_vbak-auart.
            IF sy-subrc = 0 .
            ENDIF.

    Shashank,
    DATA : BEGIN OF g_t_zv7_cachemapping OCCURS 0,
    AUART LIKE zv7_cachemapping-AUART,
    kostl LIKE zv7_cachemapping-kostl,
    END OF g_t_zv7_cachemapping.
    If not g_t_vbak[] is initial.
    SELECT auart kostl
      FROM zv7_cachemapping INTO table g_t_zv7
    for all entries in g_t_vbak
    WHERE auart = g_t_vbak-auart.
    Endif.
    sort : g_t_zv7 by auart , 
              g_t_vbak by auart.
    loop at g_t_vbak.
      READ TABLE g_t_zv7 WITH KEY AUART = g_t_vbak-AUART
                                        BINARY SEARCH.
       IF sy-subrc eq 0.
       ENDIF.
    endloop.
    Pls. reward if useful

Maybe you are looking for

  • Won't boot past the Apple logo...

    I have an '07 MacBook that was upgraded to Snow Leopard about 6 months ago. I've had it for about 3.5 years with no problems-- until now. Last night I turned it on and it booted fine. However, once it had booted, the spinning pinwheel would not go aw

  • SOLUTION for all DLT 4000 users

    If you have had, like me, troubles in getting your DLT 4000 work with DVDSP 4, here is the solution. The problem is DVDSP continously asking for the DLT to be inserted, also when you've already put it in. The DLT 4000 is too old and too slow for your

  • Ora 1461 Error

    I am trying to add further text to an existing select statement for a report query in Application Express but I am receiving the following error :ORA-01461: can bind a LONG value only for insert into a LONG column when trying to apply changes.I am no

  • Created by column in sharepoint 2010

    we have 5 different site list that uses the created by column to help us identify who created what. for some reasons one of the site list is showing system account in the created by column and not sure how it was changed to this? all other list are s

  • Using arrays as type for bind variable

    Hi all, I have this stored procedures that takes an array of strings as an argument: CREATE OR REPLACE PACKAGE mypackage AS TYPE StringArray IS VARRAY(100) OF VARCHAR2(16); PROCEDURE doSomething(v_strings IN StringArray); END; My java code looks some