What can I do if I installed the incorrect USB Debug kit, causing my mac to

After irresponisbly not heeding the warning given to me by Apple Developer Connection (http://developer.apple.com/hardwaredrivers/download/usbdebug.html) and installing the incorrect version of IOUSBFamily Debug Kit, my Mac OS X freezes upon starting up and my USB ports are completely unresponsive. That means no keyboard or mouse. I have booted in safe mode and reset the PRAM but to no avail. I still cannot move my mouse or use my keyboard. I do not have any other partitions on my mac or any firmware devices. Is there anything I can do?

Well I reinstalled Mac OS X and I have a folder in finder with everything from my previous system.
My mouse and keyboard work. There's something funny about the iPod though. I have pictures on it and when I plug it in, it begins to charge and iPhoto pops up asking me if I want to import photos from the iPod. However, the ipod doesn't show up in either iTunes or Finder.

Similar Messages

  • I have a new mac book air and somehow iPhoto was installed twice.  Also, a second library was created and it became the default library.  I attempted to switch to the original library but it won't open.  what can I do to revert to the old library?

    I have a new mac book air and somehow iPhoto was installed twice.  Also, a second library was created and it became the default library.  I attempted to switch to the original library but it won't open.  what can I do to revert to the old library?

    Both iPhotos open to a default library (#2) which has 300+ photos,  I attempted to "switch to library" under the file tab in iPhoto and tried to choose "other library" which had most of my photos.  When I attempt to open it, it doesn't do anything.  I can see it and there are 2 libraries but it won't open.
    Have you tried to open your old iPhoto library by double-clicking it directly, instead of using the File menu?  That should work, if you are running iPhoto '11 and the library has been created by that version or an older version.  DO you get an error message, if you select the library directly in the Finder?
    I checked and it is the latest version of iPhoto.
    Is it iPhoto '11, version 6.0.5? "Latest version" is ambiguous, because it will depend on your system version.
    Where is your iPhoto Library stored?

  • The black "show shadow clipping" indicator not extinguishable.  What can be done?  I tried the obvious.  There is no evidence of clipping.

    The black "show shadow clipping" indicator not extinguishable. .  What can be done?  I tried the obvious.  There is no evidence of clipping.
    Lightroom version: 5.6 [974614]
    License type: Perpetual
    Operating system: Windows 7 Ultimate Edition
    Version: 6.1 [7601]
    Application architecture: x64
    System architecture: x64
    Logical processor count: 8
    Processor speed: 3.3 GHz
    Built-in memory: 16364.3 MB
    Real memory available to Lightroom: 16364.3 MB
    Real memory used by Lightroom: 1055.2 MB (6.4%)
    Virtual memory used by Lightroom: 1071.8 MB
    Memory cache size: 2.0 MB
    Maximum thread count used by Camera Raw: 4
    System DPI setting: 96 DPI
    Desktop composition enabled: No
    Displays: 1) 1920x1080, 2) 1920x1080
    Application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 5.6
    Library Path: C:\Adobe Lightroom Catalogs\2014_05_31 (3).lrcat
    Settings Folder: C:\Users\XXXX\AppData\Roaming\Adobe\Lightroom
    Installed Plugins:
    1) Canon Tether Plugin
    2) Facebook
    Config.lua flags: None
    Adapter #1: Vendor : 1002
      Device : 6739
      Subsystem : 25201462
      Revision : 0
      Video Memory : 1003
    AudioDeviceIOBlockSize: 1024
    AudioDeviceName: Speakers / Headphones (IDT High Definition Audio CODEC)
    AudioDeviceNumberOfChannels: 2
    AudioDeviceSampleRate: 44100
    Build: Uninitialized
    CardID: 26425
    Direct2DEnabled: false
    GPUDevice: D3D
    MaxTexture2DSize: 8192
    OGLEnabled: true
    Renderer: AMD Radeon HD 6800 Series
    ShaderModel: 11.1
    Vendor: AMD
    VendorID: 4098
    Version: 1002:6739:25201462:0000

    First off, this image is not a raw image.  It is a compressed small-raw of some sort so Adobe's normal demosaicking algorithms are not being employed, and Adobe is having to reverse engineer R, G, B channels from Y, Cb, Cr channels, so something may be non-optimal this conversion.
    Secondly, at least with this non-raw Y, Cb, Cr image, there are some Y pixels that have zero value in the file, so no matter what you do, other than adjusting the bottom of the tone curve above zero, they will be clipped.
    It also seems that the clipping indicator triangles are not affected by the Detail settings so turning off any noise-reduction or sharpening is required show you which pixels the clipping triangle is keying off of.
    Here is your image opened in an RawDigger which is a raw analysis program that indicates the Y channel does have a minimum value of 0:
    Here is a screenshot of LR with a very small crop on the shadowed background area above the performers, with the Detail settings turned off--no noise reduction or sharpening, and the Toning settings as bright as possible, and in that small crop area, there are a few black pixels that are highlighted blue if I turn on the clipping indicator, so it's not surprising, that with this image, at least, the black clipping indicator doesn't turn off very easily.  In this side-by-side, they have the same settings, but the Before image is without the clipping indicator and the After image is with the clipping indicator engaged so you can see the 4 pixels that are 0 in the tiny cropped area:
    Here is a DNG of the settings as in the above LR screenshot, other than the embedded preview that appears to be the entire image not the tiny cropped area:
    https://dl.dropboxusercontent.com/u/9905000/Dab_143378_smallcrop_maxedtoning.dng

  • My acrobat froze instalation at %80 and stopped what can be done to finish instalation?

    My acrobat froze instalation at %80 and stopped what can be done to finish instalation?

    Hi Daniel ,
    Which version of Acrobat are you using?
    Which Operating System do you work on?
    Here is the link for Acrobat 9 for Windows XP .See if this helps .
    Let us know how it goes.
    https://helpx.adobe.com/acrobat/kb/troubleshoot-installation-errors-or-freezes.html
    If that does not work you can try downloading Acrobat with the help of following link.
    https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
    Regards
    Sukrit Dhingra

  • HT1338 When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed  and remains as if the computer is now Frozen. Mac book  Pro leopard operating system. What can I do to get past the freeze?

    When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed  and remains as if the computer is now Frozen. Mac book  Pro leopard operating system. What can I do to get past the freeze?

    Could the disk have failed?
    Can you hear it?
    Boot from the install DVD and see what Disk Utility says.

  • What can prevent NI-DAQ from installing on a computer?

    What can prevent NI-DAQ from installing on a computer? I have been using Labview/NI-DAQ for 7 years and have never had this problem before. The s/w does not appear to be installed on machine but when I run the installation cd it does not install anything.Windows NT is the OS. Labview 6.1 and ni-daq 6.9.2 are the versions.

    duane wrote:
    What can prevent NI-DAQ from installing on a computer? I have been using Labview/NI-DAQ for 7 years and have never had this problem before. The s/w does not appear to be installed on machine but when I run the installation cd it does not install anything.Windows NT is the OS. Labview 6.1 and ni-daq 6.9.2 are the versions.
    I was able to remedy problem by using windows explorer to view ni-daq cd and run the nidaq.msi in the nidaq dir. Going this route caused a user window to appear that allows you to remove all / repair etc. I selected the remove all option which then removed whatever had been installed on previous installation. I then went the usual route of control panel\settings\remove s/w to remove the MAX. I then went back and ran setup.exe in the nidaq cd root dir and everything installed properly. The key was the first step mentioned above. The control panel\settings\remove s/w display did not show ni-daq evidently due to prior improper installation which prevented uninstalling this way. The autorun feature of the ni-daq cd did not deal with the improper installation because it would simply say it successfully installed when it did not install any thing. The original installation that improperly installed the ni-daq was when I installed the labview full development system. Everything else installed correctly at that time except for ni-daq. Who Knows?

  • When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

    When the message arrives, the message tone sound that many times. How this problem can be solved? I installed the new version, but the problem is not resolved, the future is to be taken into account in the new version of this?

    I'm not sure I understand the question, is the message tone going more then once?
    Turn off repeat message alert here:
    settings > notifications > messages > repeat alert > never
    Some people have found this does not stop the repeat miessage tone,
    if you are one of those then I suggest you contact Apple:
    http://www.apple.com/feedback/iphone.html
    They may not respond, but hopefully will fix in uodate if enough people complain.

  • I connected the rocketfish mini display port but am only able to have audio through my computer.  I was able to successfully drag the video to the tv.  What can I do to hear through the tv?

    I connected the rocketfish mini display port but am only able to have audio through my computer.  I was able to successfully drag the video to the tv.  What can I do to hear through the tv?

    I HAVE T.V VOLUME!!!   Thank you sooooo much eww.  I was on my way thinking I would have to buy yet another type of cable.  : )  Again thanks!!!

  • My start Volume is full. I cleanded it to late. Now is he not starting correctly. The screen is white. what can i do to come to the Desktop?

    My Startvolume is full. I cleanded it to late. Now is he not starting correctly. The screen is white. What can i do to come to the Desktop?

    What do you mean by you "cleaned" it?
    Try booting into Safe Mode: http://support.apple.com/kb/HT1564
    If you can boot into Safe Mode, try clearing off some space while booted there.

  • How can I get assistance to install the audition program in my Mac Machine?

    Hi, how can I get assistance to install the audition program in my Mac Machine

    uninstall your trial, clean your computer (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6), then dl the installation files and install:
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • What can be preventing me to see the activated multiprovider in BEx?

    Hi,
    So I have two different multiproviders in Netweaver 7.0 all activated; all under the same infoarea. In BEx, when I try to open to queries attached to these multiproviders, one comes with its queries transported from BW 3.0 but the second multiprovider does not appear in BEx when I searched under InfoArea, let alone see the attached reports.
    What can be preventing me to see the activated multiprovider in BEx?
    It is some setting in Netweaver, I will appreciate stepst to fix it.
    [Note: after the transport, one of the multiproviders had activation problem and was fixed by adding char and key figure, activing update rules, etc... just in case these hints will help you to guide me ]
    Thanks

    Amanda,
    Make sure the second Multiprovider has queries. If you had problems in the activation and queries were included in the same transport, most probably they were not copied.
    Maybe you need to retransport the queries.
    Not having queries would be the only reason for it not to show in the BEx tree, as far as I know.
    Regards,
    Luis

  • What can be done to avoid getting the following error when trying to delete unused clips he operation could not be completed.  *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil

    what can be done to avoid getting the following error when trying to delete unused clips in Imovie 09 "the operation could not be completed.  *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil"  I use to get these type of error messages when trying to delete unsused clips from a large event 60 minutes or longer, but now I get this message when trying to reduce a 4 minute event.
    Also, does anyone know if there is a limit to the total amount of space that can be taken up by Projects in Imovie 09
    Thanks for any help

    Zachy,
    It goes something like this...
    Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
    Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

  • My ipod does not appear in itunes. what can i do? i installed and desinstalled intunes but it does not work, my ipod does not appear in itunes. what can i do? i installed and desinstalled intunes but it does not work

    my ipod does not appear in itunes. what can i do? i installed and desinstalled intunes but it does not work, my ipod does not appear in itunes. what can i do? i installed and desinstalled intunes but it does not work

    iOS: Device not Recognized in iTunes for Windows

  • I just got the new ipod touch, however it says i need to download itunes 10.1 however, when i do so... this is what it says Couldn't open "Install iTunes.pkg". This package type requires Mac OS X 10.5.

    just got the new ipod touch, however it says i need to download itunes 10.1 however, when i do so... this is what it says Couldn't open "Install iTunes.pkg". This package type requires Mac OS X 10.5.
    what do I do?

    From the box the ipod came in:
    System Requirements
    USB 2.0
    iTunes 10.5 or later7
    Mac: OS X v10.5.8 or later
    PC: Windows 7, Windows Vista, or Windows XP Home or Professional (SP3) or later
    Broadband Internet access required; fees may apply"

  • Good morning, my photoshop stopped working, it gives error when started, what can it be?  This is the message that appears: Unable to start the program it took a unexpected end of file  I hope answer

    Good morning, my photoshop stopped working, it gives error when started, what can it be?
    This is the message that appears:
    Unable to start the program it took a unexpected end of file
    I hope answer

    Could not initialize Photoshop because an unexpected end-of-file was encountered. | Mylenium's Error Code Database
    Mylenium

Maybe you are looking for