What can I do if I press the home and sleep botton at the same time and it doesnt take a picture?
What can I do if I press the home and sleep botton at the same time and it doesnt take a picture? I want to take a picture of something in the internet and I cant! I used to be able to do it but now, it doesnt work anymore? What can I do?
Press and hold the home button
Quickly press and release the sleep button
Release the home button
You'll hear a shutter click
The screenshot will be in your camera roll
Similar Messages
-
I am having mac book air 2012model i had installed mavericks and use it, i long press command and power button at a same time and i saw the command prompt, from that i had formated the total hard disk. how to i want to install the OS again ?
i tryed with download mavericks but finally its saying a error message like cant conect to istore like that its saying and every thing is clear like internet and other stuf i tryed with 3times no progress same error pls help.. i bought this lap for my bro with his apple id only we use it now he got a new mac book pro so he gave to me so i formated and use it i use my apple id is that problem come because of changing apple id ? pls eplainFirstly, what is the source of the 10.6.4 disc? Is it the original installation disc for your MacBook, or one 'borrowed' from another computer?
It isn't the retail version, because that's 10.6.3.
Assuming it's the correct disc (i.e. the one that shipped with your Mac), you need to boot from it again.
OK the language page.
From the installer screen, ignore the continue button, go to the menu bar and choose Disk Utility from the Utilities menu.
In DU, select your internal drive in the sidebar (the top item with the makers name and serial no.).
Run Repair Disk. If that comes up as disk OK, click the partition tab. Select the partiton from the drop-down above the graphic; 1 partiton is all you need.
Go to the options button and ensure that the partition scheme is GUID and the file system to Mac OS Extended (Journalled). Name the partiton (usually Macintosh HD), click Apply.
When the Macintosh HD volume appears below the drive name, quit DU and see if you can then install.
If the screen after the language screen doesn't show the menu bar, it may be necessary to use another Mac to do the job with the MB in Firewire Target Disc Mode. If it won't boot in TDM, or the MB doesn't have FireWire then it's getting very difficult. -
On my ipod touch the screen is white, and i've tried pressing the home button and lock button at the same time and nothing happens... what do i do?
On my Ipod touch the screen will not work. I can't slide it to unlock
Try here > iPod touch: Troubleshooting touchscreen response -
I updated my ipad 2from IOS 5 to IOS 8. All games and apps that I downloaded was deleted. What can I do to return them back, even after downloading one of the games He deleded all the steps I went through and I need to start all over again
iCloud: Restore or set up your iOS device from iCloud
Or from iTunes http://www.iphonefaq.org/archives/971992 -
What can i do about my iphone that has a blue tint to the screen when i have sunglasses on?
what can i do about my iphone that has a blue tint to the screen when i have sunglasses on?
That sounds like an issue with the sunglasses and possible polarization...there is nothing that you can do to offset that on the iPhone itself.
-
What can be done so that these files do not eat up all the disk space.
Dear Adviser
This is NOT a bug report or an enhancement request.
We are looking for advice on a customer support call.
We are using iPlanet Webserver 4.1 SP7 and iPlanet Directory
Server 4.12 on Solaris 2.8.
We are checking to see if there is any engineering
documentation or quick pointers on LDAP database file
sizes and cache file sizes that may relate to a
reported problem.
Thank you for your time and co-operation in advance.
We have been working on a TIBCO/Portal Builder customer
issue that does not seem to have guidance in end
user documentation. This is related to a significant
increase in LDAP and cache file sizes (which at this
point do NOT seem to affect any performance). Is this
something that you are aware of from your QA/performance
tests? The problem seems to have suddenly cropped
up and we are attempting to isolate the triggerring event.
We started with the possibility that it is
a. Solaris Platform issue
OR
b. LDAP issue
We have done several experiments to isolate specific
issues as described below. We have researched
Sun/iPlanet web site and technical sites on the net.
Currently, we believe that the LDAP database size is increasing
because the Portal has been configured with pages
that have a lot of "Personalized" panes. Users are visiting
these pages, and getting automatically subscribed to these
panes, which add corresponding entries in the LDAP server.
Please find below the listing of all the files (from LDAP
DB directory) which are growing very fast. Kindly advise what can be
done so that these files do not eat up all the disk space.
-rw------- 1 netscape applsw 32768 Feb 4 2001 numsubordinates.db2
-rw------- 1 netscape applsw 16384 Feb 4 2001 aci.db2
-rw------- 1 netscape applsw 16384 Feb 4 2001 copiedfrom.db2
-rw------- 1 netscape applsw 16384 Feb 4 2001 default.db2
-rw------- 1 netscape applsw 16384 Sep 14 19:07 uid.db2
-rw------- 1 netscape applsw 16384 Sep 14 19:07 sn.db2
-rw------- 1 netscape applsw 16384 Sep 14 19:07 givenName.db2
-rw------- 1 netscape applsw 32768 Sep 14 19:26 cn.db2
-rw-r----- 1 netscape applsw 32768 Feb 7 04:08 __db_log.share
-rw-r----- 1 netscape applsw 708608 Feb 7 04:08 __db_lock.share
-rw-r----- 1 netscape applsw 625000448 Feb 7 04:08 __db_mpool.share
-rw------- 1 netscape applsw 18 Feb 9 12:34 DBVERSION
-rw------- 1 netscape applsw 811008 Feb 14 10:14 apname.db2
-rw------- 1 netscape applsw 3702784 Feb 14 11:23 parentid.db2
-rw------- 1 netscape applsw 98304 Feb 14 11:23 objectclass.db2
-rw------- 1 netscape applsw 277479424 Feb 14 11:23 id2entry.db2
-rw------- 1 netscape applsw 67829760 Feb 14 11:23 entrydn.db2
-rw------- 1 netscape applsw 26017792 Feb 14 11:23 dncomp.db2
-rw------- 1 netscape applsw 81920 Feb 14 11:23 apjavaclass.db2
-rw------- 1 netscape applsw 24592384 Feb 14 11:23 apguid.db2
-rw-r----- 1 netscape applsw 4096 Feb 14 11:24 __db_txn.share
-rw-r----- 1 netscape applsw 8040951 Feb 14 11:24 log.02045
Do let us know what your advice is.
Thanks,
Ambareesh
([email protected])
Tibco SupportThis may be perfectly normal behavior for the LDAP server. If some application is adding a lot of data to the server, the database will necessarily grow. You can look at the access log to find out the IP address of the client, the BIND dn of the client, and the operations from that client. Perhaps this will help you narrow down the culprit.
-
I accidently pressed the home button, sleep/wake up button and the up volume button on my ipod touch 4 gen and it turned on and then off and wont turn on. can someone please help?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Whenever I open the iTunes store, the home pages of all of the sections (Music, App Store etc.) are BLACK. They still have clickable hyperlinks, but I can't see what I'm clicking. Any pagess accessed through the drop-down menus (even iHelp) or by randomly clicking I can't see.
Thanks but it's just my desktop that doesn't see it though. My notebook sees it everytime, even at the same exact time that my desktop doesn't see it. For example yesterday when I was typing up this post, I was typing up the post on my notebook because my desktop didn't see the router. I don't think it has anything to do with the router actually, but I wanted to see if anyone on here has encountered this issue before. Other forums have similar issues but I've tried all of the fixes I found elsewhere and they didn't work.
Any other ideas?
Thanks! -
I've been trying to get into my apple account since Tuesday to do updates. I have tried everything. I have been on the phone with apple for hours at a time and nobody can help. Does anybody know what I can do.
Try Resetting the PRAM
-
when i press the power button and the "home" button it lights up the screen. however.... the screen is magnatized like 300% percent. and i cant open it or anything becasue it wont let me move the screen!!! what to do??
Yup! I've been there! You just have to double-tap the screen with three fingers and the zoom should go back. You have to turn off the feature in Settings>Accessibility>Zoom>and turn the switch off so this won't happen again when you double-triple tap.
-
I would like to use multiple iPads at my residence and use home sharing for guests to watch content from my i-tunes, all on the the same network.
what is the maximum number of IOS devices that can used at the same time, and be authorised on the "home sharing" at the same time?Thanks for a quick response!
Under "Network adapters", here's what I found:
- Broadcom 802.11g Network Adapter
- 1394 Net Adapter
- Marvell Yukon 88E8036 PCI-E Fast Ethernet Controler
Two other wireless USB adapters are the same:
- BLANC Mini Wireless USB adapter -
I've attached a VI that I am using to acquire amplitude from Spectrum analyzerse. I tried to connect amplitude ouput to the VI Write Characters To File.vi and Write to Spreadsheet File.vi. Unfortunately when I run continual this VI without interruption, labview ask me many time to enter a new file name to save a new value.
So, How can I do to aquire and save date in the same time and in the same file when I run continual my VI for example during 10 min.
Thank you in advance.
Regards,
Attachments:
HP8563E_Query_Amplitude.vi 37 KBHi,
Your VI does work perfectly. Unfortunately this not what I want to do. I've made error in my last comment. I am so sorry for this.
So I explain to you again what I want to do exactly. I want to acquire amplitude along road by my vehicle. I want to use wheel signal coming from vehicle to measure distance along road. Then I acquire 1 amplitude each 60 inches from spectrum analyzer.
I acquire from PC parallel port a coded wheel signal coming from vehicle (each period of the signal corresponds to 12 Inches). Figure attached shows the numeric signal coming from vehicle, and the corresponding values “120” and “88” that I can read from In Port vi.
So I want to acquire 1 time amplitude from spectrum analyser each 5
period of the signal that I am acquiring from parallel port.
So fist I have to find how can I count the number of period from reading the values “120” and “88” that I am acquiring from In Port (I don’t know the way to count a number of period from reading values “120” and “88”).
Here is a new algorithm.
1) i=0 (counter: number of period)
2) I read value from In Port
3) If I acquire a period
i= i+1 (another period)
4) If i is multiple of 5 (If I read 5 period)
acquire 1 time amplitude and write to the same
file this amplitude and the corresponding distance
Distance = 12*i). Remember each period of signal
Corresponds to 12 Inches).i has to take these
values: 5,10,15,20,25,35,40,45,50,55,60............
5) Back to 2 if not stop.
Thank you very much for helping me.
Regards,
Attachments:
Acquire_Amplitude_00.vi 59 KB
Figure_Algorithm.doc 26 KB -
My MacBook works fine wifi everywhere except for home. The home wifi is fine with the iPad and iPhone, so I assume the issue is with my computer. My computer works fine on wifi networks elsewhere. The only problem is at home.
The computer "connects to the wifi," but browsers and other internet-dependent software do not work. Curiously, if I connect the ethernet cord that doesn't work either. Usually if I reset the modem to factory settings twice (for some reason, once doesn't do the trick), my computer will fully connect to the wifi. However, in a few days, it goes back to not working.
Today, resetting the modem didn't work. I could only get wifi connection while in safe mode, but not in normal mode. So, the issue seems to be software not hardware. I have tried starting new accounts in normal mode, but those also don't connect properly to internet.
Not sure if this is relevant, but this problem started when my building switched internet providers from ComHem to Telia (I live in Sweden).
What do you recommend I do?
Thanks!
PS I use Snow Leopard: OS 10.6.8Not unless the modem is causing a problem.
What you want to do is get it to work reliably over Ethernet first, then tackle wifi. Power off the modem. On your macbook, delete the Ethernet configuration and the Wifi configuration. Power up the modem, then connect the mac via Ethernet. Create the new Ethernet configuration and see if you can connect. -
Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks
This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.
-
can anyone help please. how do i get the home button to appear on the touch screen my home button has stopped working?
I have same problem.
However, I am unable to turn on Assistive Touch.
At one time I was able to activate it, but it went away and now I cant reactivate.
What is the solution?
Maybe you are looking for
-
How do I use the print function to output a numeric variable with a fixed amount of leading zeroes
I need to create an output from a T-SQL query that picks a numeric variable and uses the print function to output with leading zeroes if it is less than three characters long when converted to string. For example if the variable is 12 the output sho
-
Connect my macbook pro to 2 external monitors
I want to connect my macbook pro up to 2 external monitors. Anyway to do this?
-
Imp full=y issue.
Dear All, Database: 10.2.0.1 OS: AIX 5L i am exporting a full db dump from Server A to Server B. for this purpose i created a user dbadmin on both source and target database and granted him (EXP_FULL_DATABASE & IMP_FULL_DATABASE) privlegs. Server B i
-
Just installed PSE10 on Win7 Pro 64-bit. I can launch Organizer one time, and then subsequent launches hang mid-launch. It appears that the previous session didn't close as Organizer still shows up in Task Manager. If I end task, I can then launch
-
HI, If i do: java.sql.Date date1; String year1; year1=date1.getyear(); System.out.println(year); I get year=80 whereas in my database i have 1980... No problem to update or create records with the year complete.. But which method could i use to get t