What can i do to have iCloud on my computer?
hi
Heidijomiranda wrote:
I need help because I recently purchased my Macbook Pro and I am trying to open a book that I purchased in Ibooks on my sons computer.
did you use your sons Apple ID..? If so... those items are tied to that Apple ID.
If your issue is with the Authorization of your New Mac...
On your Computer... Open iTunes...
If you're using iTunes 11 click on the box icon in the top-left corner to see the " Show Menu Bar "
and from the Menu Bar select Store...
From the Store menu, choose Authorize This Computer.
When prompted, enter your Apple ID and password, then click Authorize.
See Here for full details...
About authorization and deauthorization
Similar Messages
-
my ipod touch 2g is no longer being recognized by itunes why and what can i do i have reset it and everything
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
I can't open my iTunes because it says MSVCR80.dll was not found. What can I do? Have I lost my entire library? Thank you for any help.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99810) -
What Can Be Done To Have My Logo in Fox and IE Have Sam Position on the Page?
Hi,
My logo and index page in FireFor and Explore Look Offset.
What can I do to have the logo and text around the logo look CENTERED? Is it Possible?
www.collegebargain.com
cheers,
Dreamweaver101.1First validate code and fix errors.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.collegebargain.com%2F
The main problem is a missing document type declaration (DTD) on top.
To fix this in DW, go to Modify > Page Properties > Title/encoding Choose a DTD that fits your coding skills. If you're intent on using tables for layouts, then I recommend HTML 4.0 Transitional. Hit Apply. Repeat with other pages.
Nancy O. -
The Photoshop loader says I need Internet Explorer v 4.0 or later, I have v. 11. What can I do to load on a new computer?
What operating system are you using and version of photoshop elements?
How much free space does your hard drive have? -
What can I do to have my AppStore ID Password asked each time I download an app ?
What can I do to have my AppStore ID Password asked each time I download an app ?
Apple just recently changed the authentication process to NOT ask for username/password, at least when installing a *free* App or updating one that was free.
In iOS 6, (at least, I don't remember if it was in iOS 5), you can set the amount of time before a password is again requested:
Settings>General>Restrictions>Require Password: Immediately. Not having used this, I don't know if it will ask for a password everytime. You might want to give it a shot. -
help please what can i do i have a apple id that i have had scince i was in year 6 i have recently been unable to buy music or apps unless they are free because it asks for these security questions that i have no idea what the awnser is help me please
If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then the steps half-way down this page should let you reset them : http://support.apple.com/kb/HT5312
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 link above to add a rescue email address for potential future use -
i have a new ipad 2. As soon i load an application the screen is getting grey and the application shuts down. What can i do, i have a new ipad 2. As soon i load an application the screen is getting grey and the applivatiuon shuts down. What can i do
Update: An Apple rep called me today to update the status of my return. I was told that the replacements for the BLACK iPad 2's was still another 3 weeks out (at least) so they offered me a brand new WHITE 16GB iPad 2. I could have that or continue waiting. I opted to go ahead and accept the offer of a new white one. Worst case scenario if I don't like the white one I have buddy that just bought a 16GB black one that he would be willing to swap it.
-
Hello, where i can spend $0.04? I want to change the country, but i can't. I am not live in the U.S. and I don't have U.S. credit card. What can I do to have a zero balance?
lukse093 wrote:
Hello, where i can spend $0.04? I want to change the country, but i can't.
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact -
HT4111 What can I do to have the new Ipad discover plantronics voyager pro headset?
What can I do to have the new Ipad discover plantronics voyager pro headset?
Try this:
Make sure you turn off the voyager ( red light) and then hold the power button until you see the alternating red and blue flashing light that indicates it is discoverable. Then go back to the iPad settings and you should see that it has discovered the voyager. Then select (touch where it says 'voyager') and it should pair. -
I have a 2007 MacBook 2GHz intel core 2 duo and i want to update to either snow leopard or lion what can ido if i have 10.4 already. please help
You can upgrade from 10.4 straight to 10.6 with no problems. Any program that runs under 10.4 should run under10.6. See this list for compatibility with 10.6: http://snowleopard.wikidot.com/
You might have to upgrade some drivers for printers, etc.... And you will have to install Rosetta if you have any Power PC applications http://www.macobserver.com/tmo/article/snow_leopard_installing_rosetta/ I recently upgraded an older MacBook (model 1,1) straight from 10.4 to 10.6.
Once you are at 10.6.8 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store. The price is $19.99.
You must have at least a model 2,1 MacBook. Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications. -
i habe the ipod touch 5 ios 7. i reset my passcode but i dont remeber what it is. i dont have itunes on my computer and my home button doesnt work. how do i reset my passcode or ipod?
If you can't remember your passcode, you'll have to restore it to remove the passcode, as explained here: http://support.apple.com/kb/HT1212.
If you're running iOS 7 with Fid My iPod enabled, in order to restore it you'll have to force it into recovery mode as explained here: http://support.apple.com/kb/ht1808, or erased it using Find My iPhone on icloud.com if your home button isn't working (see http://help.apple.com/icloud/#/mmfc0ef36f). -
What can prevent NI-DAQ from installing on a computer?
What can prevent NI-DAQ from installing on a computer? I have been using Labview/NI-DAQ for 7 years and have never had this problem before. The s/w does not appear to be installed on machine but when I run the installation cd it does not install anything.Windows NT is the OS. Labview 6.1 and ni-daq 6.9.2 are the versions.
duane wrote:
What can prevent NI-DAQ from installing on a computer? I have been using Labview/NI-DAQ for 7 years and have never had this problem before. The s/w does not appear to be installed on machine but when I run the installation cd it does not install anything.Windows NT is the OS. Labview 6.1 and ni-daq 6.9.2 are the versions.
I was able to remedy problem by using windows explorer to view ni-daq cd and run the nidaq.msi in the nidaq dir. Going this route caused a user window to appear that allows you to remove all / repair etc. I selected the remove all option which then removed whatever had been installed on previous installation. I then went the usual route of control panel\settings\remove s/w to remove the MAX. I then went back and ran setup.exe in the nidaq cd root dir and everything installed properly. The key was the first step mentioned above. The control panel\settings\remove s/w display did not show ni-daq evidently due to prior improper installation which prevented uninstalling this way. The autorun feature of the ni-daq cd did not deal with the improper installation because it would simply say it successfully installed when it did not install any thing. The original installation that improperly installed the ni-daq was when I installed the labview full development system. Everything else installed correctly at that time except for ni-daq. Who Knows? -
My Macbook built-in keyboard has stopped responding, (even caps lock light does not come on). What can I do as cannot even login to computer?
There has been no spillage and it has not been dropped.Do you have access to a USB wired Apple (or maybe even a PC) keyboard?
That may be used to help troubleshoot the internal keyboard and on startup
be able to access (or see if you can) the System, and attempt to see about
troubleshooting. See if it will start in SafeBoot, (shift key held down just after
startup tone, if it runs in safeboot, then login to see if you can read system
logs in Console) and another idea may be to attempt to start in Recovery &
then attempt to use OS X Utilities there to see if you can verify and then to
repair the hard disk drive, and do some checks on the hardware.
•Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Was the computer an Apple official refurbished unit bought direct from Apple?
Did you get an extended warranty from Apple - if it were directly bought there?
Usually these are online purchases from Apple Store; other companies offer
repaired or restored used computers and call them 'refurbished' or they may
have bought actual refurbished from Apple stock; these may be resold on ebay
or via amazon, and may or may not have a residual warranty of some kind.
In some cases the keyboard may fail due to some connection on the logic board
not fitting correctly, or some other loose wire; however if the battery may have
swollen, that could contribute to issues with both trackpad and keyboard.
A visit to an authorized Apple service provider is recommended, or contact the
seller you bought yours from to ask if they may offer suggestions or perhaps a
discount on diagnostic + repair if there is no warranty on the product.
Find an Apple Authorized Service Provider
Visit an Apple Retail Store
https://locate.apple.com/country - locate authorized sales, service, by country.
Without more information, you may have to look into your local consumer
protection laws to see if your area may allow you more than others when
it comes to problems with electronics. If in the EU or UK, it may be longer.
You could contact a nearby Apple Store with Genius bar for advice...
Good luck & happy computing! -
My iPod touch is stuck in recovery mode, but when I connect it to my computer to restore it, my computer does not recognize it. It does not appear as a device in my iTunes. What can I do to restore it/make my computer recognize it?
DId it successfully connect to this computer before?
Try:
iOS: Device not recognized in iTunes for Windows
or
V
Also try placing the iPod in DFU mode and then try restoring
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Maybe you are looking for
-
ok so i accidentally remove the USB while my laptop was backing up to the time machine partition on my external HDD. I plug it in again, and no time machine partition. just the other part (fat 32 partition). so i open disk utilities.. the partition i
-
Acrobat Pro XI: Creating a PDF from a Web Page
When I try to create a PDF from a Web page using Acrobat XI, I get the Error Code "Nothing done" and "Authorization Failure", but it doesn't happen on all webistes. Does anyone know what could be causing this and how to fix it? I'm using the trial ve
-
When I turn on my computer I get the following error messages: Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings. Insecure Startup Item disabled. "Library/StartupIt
-
Throw a popup message just after pressing SAVE button?
Hello I want to throw a message IMMEDIATELY after clicking the SAVE button by user, so, i put JS as below in the Pre-Save event of the form, but its not working, directly am getting the file-download manager dialog box, pls. let me know how to achiev
-
Strangeness Using HTML with JTabbedPane
I'm getting some weird behavior when using html format for a JTabbedPane. It seems when I create tabs using HTML, it works fine, but when I subsequently try to change the tab title using JTabbedPane.setTitleAt(), the title doesn't change. The title d