What can i do to restrict client switching between AP's

Hello Community.
Problem is in one office if the client is exact in the middle of the two AP's the clients jumps from one AP to another all the time if he moves one step to right or one step to the left. How do i change these ap switching sensing ? The client uses a WLAN phone and during the AP's switch he get a little noise on the phone.
Thanks for your help and best regards

The APs are on differenet channels because of DCA, the power level where on Automatic "1" i set the power level in TPC from Automatic to fixed "2".
The show wlan:
WLAN Identifier.................................. 1
Profile Name..................................... internet
Network Name (SSID).............................. internet
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
  Client Profiling Status ....................... Disabled
   DHCP ......................................... Disabled
   HTTP ......................................... Disabled
  Radius-NAC State............................... Disabled
  SNMP-NAC State................................. Disabled
  Quarantine VLAN................................ 0
Maximum number of Associated Clients............. 0
Maximum number of Clients per AP Radio........... 200
Number of Active Clients......................... 17
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 64800 seconds
User Idle Timeout................................ 300 seconds
--More-- or (q)uit
User Idle Threshold.............................. 0 Bytes
NAS-identifier................................... WLC01
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
Multicast Interface.............................. Not Configured
WLAN IPv4 ACL.................................... unconfigured
WLAN IPv6 ACL.................................... unconfigured
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
DHCP Server...................................... Default
DHCP Address Assignment Required................. Disabled
Static IP client tunneling....................... Disabled
Quality of Service............................... Silver
Per-SSID Rate Limits............................. Upstream      Downstream
Average Data Rate................................   0             0
Average Realtime Data Rate.......................   0             0
Burst Data Rate..................................   0             0
Burst Realtime Data Rate.........................   0             0
Per-Client Rate Limits........................... Upstream      Downstream
Average Data Rate................................   0             0
Average Realtime Data Rate.......................   0             0
Burst Data Rate..................................   0             0
--More-- or (q)uit
Burst Realtime Data Rate.........................   0             0
Scan Defer Priority.............................. 4,5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Allowed
WMM UAPSD Compliant Client Support............... Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
Passive Client Feature........................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... All
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
   Authentication................................ Global Servers
   Accounting.................................... Global Servers
      Interim Update............................. Disabled
   Dynamic Interface............................. Disabled
   Dynamic Interface Priority.................... wlan
Local EAP Authentication......................... Disabled
--More-- or (q)uit
Security
   802.11 Authentication:........................ Open System
   FT Support.................................... Disabled
   Static WEP Keys............................... Disabled
   802.1X........................................ Disabled
   Wi-Fi Protected Access (WPA/WPA2)............. Enabled
      WPA (SSN IE)............................... Disabled
      WPA2 (RSN IE).............................. Enabled
         TKIP Cipher............................. Disabled
         AES Cipher.............................. Enabled
                                                               Auth Key Management
         802.1x.................................. Disabled
         PSK..................................... Enabled
         CCKM.................................... Disabled
         FT-1X(802.11r).......................... Disabled
         FT-PSK(802.11r)......................... Disabled
         PMF-1X(802.11w)......................... Disabled
         PMF-PSK(802.11w)........................ Disabled
      FT Reassociation Timeout................... 20
      FT Over-The-DS mode........................ Enabled
      GTK Randomization.......................... Disabled
      SKC Cache Support.......................... Disabled
--More-- or (q)uit
      CCKM TSF Tolerance......................... 1000
   WAPI.......................................... Disabled
   Wi-Fi Direct policy configured................ Disabled
   EAP-Passthrough............................... Disabled
   CKIP ......................................... Disabled
   Web Based Authentication...................... Disabled
   Web-Passthrough............................... Disabled
   Conditional Web Redirect...................... Disabled
   Splash-Page Web Redirect...................... Disabled
   Auto Anchor................................... Disabled
   FlexConnect Local Switching................... Disabled
   flexconnect Central Dhcp Flag................. Disabled
   flexconnect nat-pat Flag...................... Disabled
   flexconnect Dns Override Flag................. Disabled
   FlexConnect Vlan based Central Switching ..... Disabled
   FlexConnect Local Authentication.............. Disabled
   FlexConnect Learn IP Address.................. Enabled
   Client MFP.................................... Optional
   PMF........................................... Disabled
   PMF Association Comeback Time................. 1
   PMF SA Query RetryTimeout..................... 200
   Tkip MIC Countermeasure Hold-down Timer....... 60
AVC Visibilty.................................... Disabled
--More-- or (q)uit
AVC Profile Name................................. None
Flow Monitor Name................................ None
Call Snooping.................................... Disabled
Roamed Call Re-Anchor Policy..................... Disabled
SIP CAC Fail Send-486-Busy Policy................ Enabled
SIP CAC Fail Send Dis-Association Policy......... Disabled
KTS based CAC Policy............................. Disabled
Assisted Roaming Prediction Optimization......... Disabled
802.11k Neighbor List............................ Disabled
802.11k Neighbor List Dual Band.................. Disabled
Band Select...................................... Disabled
Load Balancing................................... Disabled
Multicast Buffer................................. Disabled
Mobility Anchor List
WLAN ID     IP Address            Status
802.11u........................................ Disabled
MSAP Services.................................. Disabled

Similar Messages

  • How can I insert a code to switch between channels?

    I’ve got a HP4263A LCR meter which is being used with an ER-18 device to get multiple channel data acquisition, when I go to getting started to trigger the device, but this VI do not have an icon to change the channel how can I insert a code to switch between channels?

    I am just trying to use the drivers developed by NI for this device, but I don't know how to work on them to obtain data from three points, or three channels which I am using from an ER-16 device. So all what I have is the driver VI for the HP4263A.the only VI I can use is getting started, because whe I try to run any other one, this message appears:
    Error -1073807346 occurred at VISA Write in HP4263A Self-Test.vi.
    Possible reasons:
    VISA: (Hex 0xBFFF000E) The given session or object reference is invalid.
    your help would be very helpful
    thanks

  • What can we promise to a client who is wellversed in SAP?

    hi,
    my client knows about SAP very well. Now when we went to them for a new project they asked us what can we do for them...i mean what value addition we can show to them compared to previous rollout. its a rollout where we work more on reports and workbooks... Plz

    Hi neeraja,
    From the message it shows that u will be new to SAP ,according to your client u just go through the prevoius rollout,and have a detailed study of their IT infrastructure and SAP h/w then try to know what they exactly wants ? and in SAP to know the existing Landscape they areusing ? Modules they are implemented ? the usage of the exixting h/w ? like this
    to know about the new technology in SAP
    http://www.sdn.sap.com
    http://en.wikipedia.org/wiki/SAP_AG
    http://en.wikipedia.org/wiki/SAP_R/3
    http://www.sapfans.com
    regards,
    S.Rajeshkumar

  • Can't change the shortcut to switch between windows (^F4) to altTAB

    Hi,
    I would like to switch between windows (not applications) by hitting ALT and TAB (same as Windows) instead of ^F4. In the preferences, I tried to change the shortcut labelled something like "Move focus to the active (or next) window". Unfortunately, it always complains that this shortcut is already used by another operation. However I can't find which operation uses ALT+TAB ?!
    How should I do ?
    Thanks in advance,
    Barth

    ecologisto wrote:
    Hi,
    I would like to switch between windows (not applications) by hitting ALT and TAB (same as Windows) instead of ^F4. In the preferences, I tried to change the shortcut labelled something like "Move focus to the active (or next) window". Unfortunately, it always complains that this shortcut is already used by another operation.
    Interesting. I can't use the TAB key in ANY custom shortcuts. it gives an error sound (but no message) when i try. I tried it on 3 different computers. I suggest you try a different shortcut like alt+`. It's very close to alt+tab.
    However I can't find which operation uses ALT+TAB ?!
    How should I do ?
    Thanks in advance,
    Barth

  • Other than Ctrl+Alt+Tab, what is the other keyboard shortcut to switch between Photoshop CC and After Effects CC?

    I've tried to find online but I couldn't find it.

    Windows key+tab will switch between open programs.

  • What can be resolve the web client in visual studio

    I have create a simple demo app for windows phone 8.1 in visual studio 2013 but when i am using the web client then web client is not resolving

    WebClient class is available for Silverlight (wp8/8.1) apps only. You might have created Windows Phone 8.1 Runtime app in which HttpClient class is there.
    http://developer.nokia.com/community/wiki/Using_Crypto%2B%2B_library_with_Windows_Phone_8

  • Can't find the option to switch between MacBook speakers and Airplay speakers in iTunes 11.

    In iTunes 10, the button to switch speakers was in the bottom right corner, now I can't find it anywhere. Does anyone know where it is, or if for some reason they removed this feature?!

    Welcome to the Apple Support Communities
    Go to the top right and turn on the iTunes miniplayer. Finally, you'll see AirPlay icon on it

  • What to do with the iPhone keep switch between apple logo and locked screen

    Please help me with this , thanks

    Try to Reset your device.  
    Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off that shows up first).

  • With version 9.0.1 I can no longer switch between Google accounts properly

    I have a personal Google account and a Google apps account (via my employer, with a custom domain). I normally can log into either one and switch between the two using the "switch accounts" function. This currently works in chrome, and worked in Firefox until I received an upgrade to v9.0.1 today. Now the option to access the other account just isn't there anymore.
    This feature is accessed from gmail by clicking on my name in the top right nav bar and choosing "switch accounts". You must have this feature turned on in the settings for both accounts to make this work. I use this to, for instance, read all my mail in one account and use the calendar or docs from the other one.
    Anyone have the same experience? Anyone have a suggestion as to why or a solution?

    Thanks for confirming things Vivek.Wilfred.
    FYI, for future others with this problem: After a couple hours of playing around it was fixed, though I'm not sure what finally did it. Be sure that you try Google's "Sign Out of All Accounts", and not just the regular sign out option.

  • What idiots created the "Switch between apps" tab?

    Really?
    Microsoft, you've created a major screw up and offer no solution for this.  I purchased a new laptop, (has a touchscreen), and I can not get rid of the "Switch between apps" tab without restarting the computer. 
    Swiping it does nothing, it stays.  Clicking the top left corner or touching there does nothing.  It just sits there determined to be a pain and take up part of the screen. 
    What idiot designed this function.  Have they been fired? Why does Microsoft refuse to respond with a fix or answer to all of the people asking to resolve this?  
    Really ticked off customer.

    Hi Ticked at Microsoft over the Switch between apps,
    Sorry for this annoying phenomenon, it should not be like this in most situation.
    I want to provide my help to help you  get rid of this issue, instead of restarting your computer.
    Open Local Group Policy Editor, you can press Win+R to get the prompt, type
    gpedit.msc and press Enter.
    In the left pane, click/tap on to expand User Configuration, Administrative Templates, Windows Components, and Edge UI
    In the right pane of Edge UI, double click/tap on Disable help tips to edit it:
    Set the configuration to Enabled.
    Select Apply and exit Local Group Policy Editor.
    Alex Zhao
    TechNet Community Support

  • Getting around commiting at task to hardware in DAQmx and maintaining HW timing when switching between two AI tasks.

    I have a project that requires two HW timed AI task that are triggered at different rising edges. I originally started with an example vi that has HW timed retriggerable AI that seemed to working fine until I decided to capture two channel with a seperate task. I received error messages due to the orginal task being committed to the hardware that prevented the second task for being configured due to reserved resources.
    I was able to changed the commit to verify and switched from a analog edge trigger to a digital edge so I could use another PFI for triggering the second acquisition and the program seems to work fine at the momment.
    Questions that I have are:
    What exactly do verify, reseve and commit refer to in regards to task setup and impact on task switching delay. What information is actually transfered when configuring the task and what are the typical delay times for switching between tasks for the task controls listed above on a PCI6071e card. I am concerned that HW timing may have been sacrificed in order to work around the reserved resources and that if someone bumps the mouse the timing sequence will miss a trigger due to an IRQ.
    Any information on this topic would be greatly appreciated.
    Kindest Regards,
    Bill

    Lon,
    Thanks for  the reply. I have another related question in regards to configuring the read property node for a digitally triggered start-stop routine with 2 presamples and collecting 5 samples per channel on 14 channels. Triggering occurs at 500 Hz and the total sampling time for all channels is restricted to 500 us max. I am current dealing with a single AI task and having difficulty capturing all the data in an output file. I have tried using a large array to store the data until the test is complete then write the array to a file to see if the file I/O was the problem. It did not work.
    I have looked the the vi and information with respect to "How do I use digital triggering to start and stop AI". The description included with the vi indicates that the read property "Relative to" must be set to current read position and the buffer definition modified to something hugh in order to keep the ahead of the write. I have tried this and cannot seem to capture the correct number of bytes in the output file. I have tried different "Relative to" settings and offsets with no luck.
    A quick summary of the test is 1000 cycles with 5 samples per channel on 14 channel captured twice during each cycle. Data read as I16 (2bytes). Neglecting the 300-500 bytes in the test comment header,  the file should be in the 112k range (1000*5*14*2*2). When I do happen to collect some data the file size is either way too small or much larger than expected.
    All this information to ask the simple question; How do I configure the read properties to make certain that I collect all the data and store it in a file.
    I apologize for running on about this problem, but I am getting really frustrated with this.
    Kindest Regards,
    Bill

  • How to switch between libraries?

    I have got to do a disk repair. I'm making sure my backup is correct as I don't want to lose all my precious pics. Lucky I checked as I've just discovered I've got two iPhoto libraries! The one I appear to be using is in the mac folder - where Users folder is, Library, System Folder, Updaters etc. It's the first area you come to when you double click on your mac's symbol in upper right corner.
    However, I also have an iPhoto library within a folder which is in my User/Pictures area.
    I want to make sure that the iPhoto library I'm using is within my user/pictures folder as it's my user files which are being backed up. However, I don't want to trash the one which is there without looking in it to see what's within. How do I switch between libraries?
    If it's empty, I can presumable just bin it then use the recommended technique to move my other library to User\Pictures.
    Thanks!

    If you use iPhoto LIbrary Manager like Larry suggested it will display the library name in the top iPhoto frame like this:
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
    Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

  • Mac, second monitor changes to canvas background when I switch between full screen apps on my mac display?

    When I plug in my monitor using a thunderbolt to hdmi cable I would like to use my moitor as a second display, which i can do, but then when i switch between full screen apps on my mac it changes what i have on my monitor to a canvas background. Is there a way to fix the display on my monitor so that it will always be accesable?

    Apple:
    This is how it "Should" work.
    Each display should be treated as it own desktop.  If you swipe on a desktop it should swipe through the hidden screens/displays.   If your a user with multi displays connected to your Mac, you could have "Full Screen" Apps, Dashboard, Mission Control, and etc available to swipe on each of your connected displays.
    Display 1...swipe, swipe... mouse over to Display 2...   swipe swipe swipe...  oh.. Display 3, swipe!  All set for work or play!
    This would be a well received "Feature" for the Worlds Most Advanced Operating System.
    Cheers
    I have seen apps (like MPlayerX and VLC) have their own "built in" workaround for the full-screen problems on multi-displays.

  • Is there a Keyboard shortcut to: a) Switch between Tab Groups? b) Switch between matching Panorama search results?

    a) Switching between tab groups would improve my workflow. Like Alt+(Shift+)Tab to switch to next/prev Tab. Cmd+Shift+W/R wold be another possible option beside the Cmd+Shift+E for Panorama.
    b) When searching in Panorama Tabbing between results would be great.

    CTRL+SHIFT+E got me to the tabs group "menu" so you could pick which tab you wanted. it's all explained here:
    http://support.mozilla.com/en-US/kb/what-are-tab-groups#w_how-do-i-switch-between-tab-groups
    I hope this is what you were looking for.

  • Fastest way you switch between multiple images (CS3) ?

    I'm originally a Fireworks user (from 2001) and am starting to learn Photoshop as it is in my CS3 set and it's superiority in image editing.
    BUT, I was suprised/shocked/P.O.-ed to notice Photoshop doesn't have tabs to easily switch between images like Fireworks has had for the last 7 years.
    (Yes, I realize CS4 has that option now, but I'm not willing to dole out another $600 bucks for another upgrade )
    Anyway, enough ********.
    My question is:
    "Can you tell me how you switch between multiple images opened in Photoshop CS3?"
    I'm assuming there must be a keyboard shortcut I can't find, or something besides having to shrink down the images and routing through them . . .
    Thank you for your time and help,
    Brad

    Hi again My,
    Thanks for the reply on my other post as well.
    Ctrl+Tab
    Got it. Thank you.
    Quick and easy enough. I'm happy :-)
    Brad

Maybe you are looking for