What can I do when saw this? "No configured AirPort base stations have been found"

What can I do when I saw this? "No configured AirPort base stations have been found"
My Time Machine is not working. And is not connected to my computer.

Did you update the firmware.. this seems to happen a lot.
Do a full factory reset and start over.. this is easier with it pulled from the network.. plugged into a computer by ethernet.. then do the reset and when you finish put it back in the network again.

Similar Messages

  • My TP-LINK TD-W8970 router cannot connect with my iMac even though my iPhone 5, iPad 3, W7 laptop and LG smart TV can. I get the message "No configured AirPort base stations have been found". Any ideas please?

    My iMac cannot connect to my TP-LINK TD-W8970 router even though all other computers can. I get the message "No configured AirPort base stations have been found" and "No PPPoE configurations were found". Any ideas please?

    Open the Network pane in System Preferences. If there's a closed padlock icon in the lower left corner, click it and enter your administrator login password when prompted.
    At the bottom of the service list on the left is a popup menu with a gear icon. From that menu, select
              Set Service Order...
    A sheet will drop down showing all listed services. Drag the one that you want to use to connect to the Internet to the top of the list. Click OK to close the sheet, then close the preference pane and confirm when prompted to save the change.

  • "No configured AirPort base stations have been found."  I can see the content of the TimeCapsule's drive in finder and Time Machine but it no longer is making backups. Ideas?

    Bought new TimeCapsule March 2013. Worked fine. Now get "No configured AirPort base stations have been found."  I can see the content of the TimeCapsule's drive in finder and Time Machine but it no longer is making backups. Ideas?

    Make sure that you have AirPort Utility 6.3.1 installed on your Mac.
    AirPort Utility 6.3.1 for Mac - Support - Apple
    Then, power off the entire network...all devices...in any order that you want
    Wait a minute, then start the modem first and let it run a full minute
    Start the next device connected to the modem, which may be your Time Capsule and let it run a minute
    Keep starting devices one at a time the same way until the entire network is back up
    See if AirPort Utility can "see" the Time Capsule now.
    If yes, try another backup. If you encounter an error message, post back with the exact message.

  • HT1533 my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in

    my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?

    OS X Mountain Lion: If you can’t hear sound from your speakers
    Read the "If you’re trying to listen through external speakers" section.

  • After i download ios 5.1.1 i cant install it there is msg tell me an error occurred installing ios 5.1.1 what can i do to solve this and install the update ( i have ipad 2 ) ?????

    After i download ios 5.1.1 i cant install it there is msg tell me an error occurred installing ios 5.1.1 what can i do to solve this and install the update ( i have ipad 2 ) ?????

    No codes on the error just msg in the center of the ipad tell me that without any codes :@

  • I no longer see my WD passport on the desktop and the time machine no longer backs up.  What can I do to fix this?  Thank you

    I haven't had my iMac backed up in quite awhile because my WD passport is not being recognized.  I went to disk utility to set it up again, but get the message "No configured AirPort base stations have been found."  I've even did the simple thing of turning off my machine, unplugging the WD passport and then replugging it in after a rebooting. Nothing!  What have I done to mess this up and can it be fix?  Thank you for any help you can give.
    I wasn't sure what info you might need:
    Mac OS X Lion 10.7.5 (11GB63b)
    Processor GHz Intel Core 2 Duo
    4 GB 1067 MHz Ram
    WD Passport for Mac 1T

    Is the WD drive plugged into the Mac directly or into the Airport??
    If it is in the airport.. unplug it and plug it back into the Mac.. you cannot use Disk Utility on remote drives.
    The WD could be dead.. Disk utility should show you.

  • When plugging in my ipod touch on Itunes, it says this ipod cannot be used because the Apple mobile device service is not started. What can I do to remedy this. This has just started happening suddenly

    When pugging in my ipod touch on itunes, it says this ipod cannot be used because the apple mobile device service is not started. What can be done to remedy this? Up till yesterday I have not had this problem

    See:
    iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • HT1937 error code 1015 what is that mean? & what can i do to resolve this error?

    error code 1015 what is that mean? & what can i do to resolve this error?

    that means you have a jailbroken phone and per the term of service of the forum you can't get any help here.

  • How can I make my iPhone wifi forget my neighbor's Airport Base Station?

    I do know how to make my iPhone's wifi "forget" a Network (like, say, a neighbor's wireless router).
    However, my iPhone keeps defaulting to a neighbor's "Airport Extreme" Airport Base Station. When it does this, of course I have no connectivity. Then, I have to go in and manually choose my own apartment's wireless router. It's a pain.
    I cannot find any way to make my iPhone forget or ignore this neighbor's Airport Base Station. Is there a way?
    iPhone 4S.
    Thanks very much for any replies,
    Brooke

    That seems to have done it, adviser. Thanks.
    I reset the network settings, and also made sure that "ask to join networks" is set to "On."
    When it started up, I turned on the iPhone's wifi, and chose my own apartment router (and entered its password).
    I then went to the farthest corner of the apartment away from our own router, where the signal is weakest, and turned wireless off and then on again. Even though my own router's signal was very weak, the iPhone still chose that router by default.
    If the problem comes up again, I'll submit the question again with the information that I have tried this step. For now, though, it looks good. Thanks!

  • Firerfox has stopped opening new windows when I ask it to; why is this and what can be done to regain this option?

    Firerfox has stopped opening new windows when I ask it to; why is this and what can be done to regain this option?
    == This happened ==
    Every time Firefox opened
    == not sure - about 2 weeks ago maybe. I recently upgraded to vn 3.6.8

    This is a workstation first off, right? 60 lbs or so?:
    And you have 10.7.2, if not why not?
    Quad core 2.8GHz? 3 x 2GB RAM or more?
    Consider new Mac Pro comes with 1TB drive 50% is actually a lot. Most users off load non system stuff to one of the other 4 hard drive bays.
    As for youtube I do read and saw threads when Lion came out. Lion does not support Rosetta aka PPC/PowerPC code of any kind, plug-ins, drivers and software all. Check into Lion Community?

  • I am using a Mac and when I save my files as a jpeg, the files become much smaller, and consequently darker and blurrier.  What can I do to fix this?

    I am using a Mac and when I save my files as a jpeg, the files become much smaller, and consequently darker and blurrier.  What can I do to fix this?  I have tried to figure out how to chat with someone at Adobe, but they certainly don't make it easy to do.  At the moment, this program is useless to me.  Very depressing....

    Hello,
    I would like to inform you that not all the browsers and online PDF readers support copying text from a PDF. If you have opened the PDF online, please download PDF file to your computer and then open the file in Adobe Reader.
    Please share a screenshot if the issue still persists.
    Regards,
    Nakul

  • I am using the Adobe Acrobat Reader on a mac and I followed all the directions to copy an image but when I press paste only half of the image appears or it appears as an empty square. What can I do to fix this?

    I am using the Adobe Acrobat Reader on a mac and I followed all the directions to copy an image but when I press paste only half of the image appears or it appears as an empty square. What can I do to fix this?

    Hello,
    I would like to inform you that not all the browsers and online PDF readers support copying text from a PDF. If you have opened the PDF online, please download PDF file to your computer and then open the file in Adobe Reader.
    Please share a screenshot if the issue still persists.
    Regards,
    Nakul

  • I installed Yosemite and now my computer is slow when logging in. Also when I type my password the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?

    I installed Yosemite and now my computer is slow when logging in. Also when I type my password, a bar appears measuring the process and then all of a sudden the screen images are distorted. After that my home screen appears and everything seems normal. What can I do to fix this?
    Here is what the etrecheck results are:
    Problem description:
    slow at start up, screen is distorted while logging in, it is fine after
    EtreCheck version: 2.1.8 (121)
    Report generated April 5, 2015 at 9:42:01 AM PDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Early 2011) (Technical Specifications)
        MacBook Pro - model: MacBookPro8,1
        1 2.3 GHz Intel Core i5 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 297
    Video Information: ℹ️
        Intel HD Graphics 3000 - VRAM: 384 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 0:7:0
    Disk Information: ℹ️
        Hitachi HTS545032B9A302 disk0 : (320.07 GB)
            EFI (disk0s1) <not mounted> : 210 MB
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
            Macintosh HD (disk1) / : 318.84 GB (174.85 GB free)
                Encrypted AES-XTS Unlocked
                Core Storage: disk0s2 319.21 GB Online
        MATSHITADVD-R   UJ-898
    USB Information: ℹ️
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM2070 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Inc. FaceTime HD Camera (Built-in)
        Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [not loaded]    com.devguru.driver.SamsungComposite (1.1.0) [Click for support]
        [not loaded]    com.logmein.driver.LogMeInSoundDriver (1.0.3 - SDK 10.5) [Click for support]
            /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
        [not loaded]    com.devguru.driver.SamsungACMControl (1.1.0) [Click for support]
        [not loaded]    com.devguru.driver.SamsungACMData (1.1.0) [Click for support]
    Startup Items: ℹ️
        HP Trap Monitor: Path: /Library/StartupItems/HP Trap Monitor
        Startup items are obsolete in OS X Yosemite
    Problem System Launch Daemons: ℹ️
        [failed]    com.apple.ucupdate.plist
        [failed]    com.apple.watchdogd.plist [Click for details]
    Launch Agents: ℹ️
        [not loaded]    com.google.keystone.agent.plist [Click for support]
        [not loaded]    com.hp.help.tocgenerator.plist [Click for support]
        [not loaded]    com.logmein.LMILaunchAgentFixer.plist [Click for support]
        [not loaded]    com.logmein.logmeingui.plist [Click for support]
        [not loaded]    com.logmein.logmeinguiagent.plist [Click for support]
        [not loaded]    com.logmein.logmeinguiagentatlogin.plist [Click for support]
    Launch Daemons: ℹ️
        [not loaded]    com.adobe.fpsaud.plist [Click for support]
        [not loaded]    com.google.keystone.daemon.plist [Click for support]
        [not loaded]    com.logmein.logmeinblanker.plist [Click for support]
        [not loaded]    com.logmein.logmeinserver.plist [Click for support]
        [not loaded]    com.logmein.raupdate.plist [Click for support]
        [not loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    User Launch Agents: ℹ️
        [not loaded]    com.adobe.ARM.[...].plist [Click for support]
        [not loaded]    com.facebook.videochat.[redacted].plist [Click for support]
        [not loaded]    com.google.GoogleContactSyncAgent.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    UNKNOWN Hidden (missing value)
        AdobeResourceSynchronizer    Application Hidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
        Android File Transfer Agent    Application  (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
        HP Product Research    Application  (/Library/Application Support/Hewlett-Packard/Customer Participation/HP Product Research.app)
        HPEventHandler    Application  (/Library/Printers/hp/hpio/HPEventHandler.app)
    Internet Plug-ins: ℹ️
        o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        LogMeInSafari64: Version: 1.0.660 [Click for support]
        Default Browser: Version: 600 - SDK 10.10
        Silverlight: Version: 5.1.10411.0 - SDK 10.6 [Click for support]
        FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        LogMeIn: Version: 1.0.660 [Click for support]
        Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]
        LogMeInSafari32: Version: 1.0.660 [Click for support]
        QuickTime Plugin: Version: 7.7.3
        googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
        AdobePDFViewer: Version: 10.0.1 [Click for support]
        SharePointBrowserPlugin: Version: 14.1.0 [Click for support]
        iPhotoPhotocast: Version: 7.0 - SDK 10.7
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
             7%    ocspd
             4%    WindowServer
             1%    kextd
             0%    ps
             0%    securityd
    Top Processes by Memory: ℹ️
        137 MB    Microsoft Word
        120 MB    Safari
        86 MB    ocspd
        82 MB    CalendarAgent
        77 MB    WindowServer
    Virtual Memory Information: ℹ️
        310 MB    Free RAM
        1.89 GB    Active RAM
        1.55 GB    Inactive RAM
        544 MB    Wired RAM
        1.13 GB    Page-ins
        8 KB    Page-outs
    Diagnostics Information: ℹ️
        Apr 5, 2015, 09:32:47 AM    Self test - passed
        Apr 5, 2015, 09:30:05 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-05-093005_[redacted].crash
        Apr 4, 2015, 01:12:41 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-131241_[redacted].crash
        Apr 4, 2015, 08:13:57 AM    /Users/[redacted]/Library/Logs/DiagnosticReports/AdobeResourceSynchronizer_2015 -04-04-081357_[redacted].crash

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • When I use Firefox and Hotmail at startup, Firefox freezes for about 1 minute, and then I can continue. First I though it was my computer but 2 other girls in my class have the same problem with Hotmail and Firefox. What can I do to change this?

    When I start Firefox, about 15 seconds after I start it, my Firefox freezes for about 1 minute. I found out that it is my Hotmail that makes Firefox freeze.
    First I thought it was my computer, but I have 2 other girls in my class that use Hotmail and Firefox and their computer also freezes for 1 full minute.
    This is very annoying, what can I do to change this?
    xxx ellen
    p.s. I am from the Netherlands, maybe that has something to do with it?

    Try deleting cookies and cache:
    1. Tools| Clear recent history
    2. Time range to clear: Everything
    3. If it isn't already selected, select '''Cookies''' and '''Cache'''
    4. '''Clear now'''
    '''Check cookie exceptions'''
    1. Tools | Options | Privacy Panel
    2. Set '''Firefox will: Use custom settings for history.''' '''Insure Accept cookies for sites and accept third-party cookies''' is selected
    3. Click '''Exceptions'''. If the misbehaving site is in that list, select it and click '''Remove site'''
    '''Safe Mode'''
    Add-ons can cause problems with not being able to log into certain websites. To see if this is the case with your issue, run [[Safe mode]]. When you get to the safe mode window, select Continue in Safe Mode. If this resolves your problem, see [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    Also see [[Updating Firefox]] and [[Cannot log in to websites]]

  • My ipod touch has a usb cable picture with an arrow pointingto the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the powerbutton is pressed. what can i do to fix this?

    my ipod touch has a usb cable picture with an arrow pointing to the itunes logo. the ipod will not connect to a computer and is unable to be turned off as there is no red power slider when the power button is pressed. what can i do to fix this?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • [SOLVED] cups and laserjet 1018

    Hi all, I've been trying to use cups to set up a Laserjet 1018 with no success. The problem I'm having is that, even though according to the CUPS web interface my job is completed, my printer doesn't print anything. That's what I tried so far (based

  • Turnover reporting in FI

    Hello. I am using version 4.6C of SAP and have found the following turnover reports: Customers: S_ALR_87012186    RFDUML00 Vendors:    S_ALR_87012093    RFKUML00 The reports are fine except that they give me values including tax (VAT). My requirement

  • Notes on my ipod

    when i put notes on my ipod i have them on there but on it when i scroll through the notes there is always and thing that has like front size and then it says >>spaz>> and some other stuff like that. how do i get that off there? someone help me plz

  • Basic Authentication in Exchange 2013

    Dear All, I am facing issue regarding basic authentication in exchange 2013 I run all the command and from Server setting I set the outlook anywhere on Basic Authentication but when I configure outlook client after successfully run the wizard the set

  • Putting jmf.jar in archive

    Hi, I have posted the question in the applet section, but got no answers... I have an applet and it needs a jar to run, I don't want to have the clients to put/install the jar (FYI: it is JMF). So I need to use the the archive in the applet tag. In p