What can I Sync using my Nokia e61 and Isync

Hi there
Can I only sync contacts and Ical?
I wanted to load some music and some pdf's onto the phone can I do this via the mac, or do I have to use the nokia cable and a PC?
New to the E61 so keen to review what can be done with it and what cant - but dont really want to buy any 3rd party sync tools

Thanks for the clarification; since posting this question I have located a BETA program from Nokia called Nokia Multimedia Transfer
I have used this to transfer music onto the Nokia E61, and enabled that to be used as my ring tone
It seems okay and havent found any issues with it, but being a BETA it is always wise to air caution

Similar Messages

  • Can i sync using 2 itunes ... home and work

    can i sync using 2 itunes ... home and work .. i want my tunes from home and my calender and contacts from work. i used to use itunes at home and i sync at work ... but cant get the isync to work with the iphone and the imac24 i use ??

    I had this same problem. You have to set up the check boxes on each computer of what you want to sync. On your home computer, have it sync a play list that you dedicate to the iPhone. Then at work have it sync everything else. Assuming you activated on your home computer this will work perfectly. If you activated on the computer that you don't sync music from, then it will ask you to erase the original sync and start on this other computer (your home one). Just let it do it and it will be fine. Hope this helps.

  • I have a annual plan, it supposed must be used in two terminals, but i haven´t been able to install any app in a second computer, it always says that the app is only available as a trial download. What can I do to solve this issue, and be able to use my p

    I have a annual plan, it supposed must be used in two terminals, but i haven´t been able to install any app in a second computer, it always says that the app is only available as a trial download. What can I do to solve this issue, and be able to use my paid plan in two computers?

    Hi Susan,
    Please refer to the help document to fix this issue:
    Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
    You may also refer to the thread as below:
    creative cloud software says my free trial has expired, but I have a paid subscription
    Regards,
    Sheena

  • Can I sync using aliases?

    I have a huge library of photos, and I'd like to sync just part of them. In iPhoto I have them set up in a bunch of different libraries, so I can't sync using iPhoto because it only syncs the library that's currently active. If I sync folders, then it includes everything in the folder, which I don't want.
    Can I create a folder of aliases and sync that? That way I could organizer things differently for Apple TV without having to duplicate many GBs of files.

    Sorry I wasn't aware you didn't have an tv, I use iphoto so I can't really test the alias approach for you, maybe some one who uses folders might be able to clear things up for us.
    Also wondering why you have multiple libraries in iphoto.
    A symlink is a little bit more than an alias, it should work in instances that an alias won't. You can set up a symlink through the terminal window although I prefer to do it through the finder. If you copy and paste the following into your script editor and save it as an application, it will create symlinks for you.
    on run
    open {choose file with prompt ¬
    "Choose a file to create a symbolic link:" without invisibles}
    end run
    on open the_files
    repeat with i from 1 to (count the_files)
    try
    set posix_path to POSIX path of (item i of the_files)
    if posix_path ends with "/" then set posix_path to ¬
    text 1 thru -2 of posix_path
    do shell script "ln -s " & quoted form of posix_path ¬
    & " " & quoted form of (posix_path & ".sym")
    end try
    end repeat
    end open
    If you double click on the application it will ask you for a file to create a symlink of. If you want to create symlinks for folders, you will need to drop the folders onto the application instead (you can also do this with files). The symlinks will be created in the same location as the original.

  • When I instaled new verson my Iphone4 stoped, in the sight shows the Itunes symbol. I tried to connect to Itunes, but can't repair. MISTAKE 3004. What can I do? I'm brasilian and don't speak english very well... Please, help me. Use my e-mail. Junara

    When I instaled new verson my Iphone4 stoped, in the sight shows the Itunes symbol. I tried to connect to Itunes, but can't repair. MISTAKE 3004. What can I do? I'm brasilian and don't speak english very well... Please, help me. Use my e-mail. Junara
    <Personal Information Edited by Host>

    Hello Junara1969,
    Thank you for contacting Apple Support Communirties. I have a couple of articles for you to take a look at to troubleshoot your issue.
    I would start with basic troubleshooting
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/TS1275
    If you are still having the same issue, then there are further steps for this specific error code here:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/TS3694
    Regards,
    Jeff D.

  • Migration from another CMS – how could be done, what can be re-used?

    Hello,
    I am discovering Webcenter Sites, and would like to know if there are standard tools to migrate from another CMS (e.g. UCM):
    – how could be done, what can be re-used?
    Thanks in advance,
    Vince

    Could you describe in more details what exactly you need?
    a) In Oracle there is an organization called Migration Factory which can do the work for you - if it is a one-off task, I'd go with them, or with a partner.
    b) You mentioned UCM - does this mean that you have a Site Studio website(s) that you want to migrate to WebCenter Sites? Why, and why just now? You could probably live for few more years with Site Studio - I believe that very soon Sites and Content will much more integrated and the migration will be much easier.
    c) I'm not sure if there is any tool for migrating templates, but I'd definitely try to leave the content (images, videos, documents) in UCM - at the moment, Sites integrate with other Content Repositories (MSSO, Documentum), so UCM will hopefully be added soon.

  • The iphone 4s has a slot on the left side of the hardware? What type of slot is it and what can it be used for?

    The iphone 4s has a slot on the left side of the hardware? What type of slot is it and what can it be used for?

    The slot is on the right side and it's for the SIM card.

  • TS1591 my ipod touch 2g is no longer being recognized by itunes why and what can i do i have reset it and everything

    my ipod touch 2g is no longer being recognized by itunes why and what can i do i have reset it and everything

    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • My husband and I share a new PC.  We have different music tastes and each have an iphone.  How can we both use our one computer and one itunes program with separate music libraries and separate iphones?

    My husband and I share a new PC.  We have different music tastes and each have an iphone.  How can we both use our one computer and one itunes program with separate music libraries and separate iphones?

    Each device only syncs waht you select.
    Select only what you want for each phone.

  • HT3910 I face problems with the Nvidia 8800 GS on my iMac 24'' 3.06Ghz intel core duo. OS 10.06.08. What can I do to solve the problem and if you recommend upgrade to mountain Lion

    I  face problems with the Nvidia 8800 GS on my iMac 24'' 3.06Ghz intel core duo. OS 10.06.08. What can I do to solve the problem and if you recommend upgrade to mountain Lion

    If you want to sync it to the iPad from that Mac, you need to upgrade it to at least 10.5.8.
    If you want to copy the music to another Mac, you don't. Move the iTunes folder of the item in the Finder's sidebar over as you would any other folder. If you put it somewhere other than the Music folder, launch iTunes with the Option key held down and point it to that location.
    (61713)

  • What is procedure to use transaction code BPH and to see it?

    Hello Expert,
    What is procedure to use transaction code BPH and to see it?
    Please let me guide...
    Thanks
    Satish

    A Late 2012 iMac can only be used as an external display for Macs with Thunderbolt. As your notebook hasn't got Thunderbolt, you can't use your Mac as an external display. See > http://support.apple.com/kb/HT3924

  • Can't sync ical on my iphone and imac. email and note work but not ical.  can anyone help.

    can't sync ical on my iphone and imac. email and note work but not ical.  can anyone help.
    thanks
    bmoreimac

    So how can i make it work that way, i asked one of my friends, and she says it works like that...when she delete the email on her iphone it is deleted on the mac too, what do i do to change this?....my mail it's hotmail, i don't know if its relevant

  • What is the main use of pooled talbe and where are they use?

    Hi gus:
             Can somebody tell me what is the main use of pooled table and where are they use,thanks!
            Regards
             Jerry
    Moderator message - Please search before asking - post locked
    Edited by: Rob Burbank on Sep 1, 2009 9:11 AM

    Hi,
    Table pools are special table types in the ABAP Dictionary. The data from several different tables can be stored together in a table pool or table cluster. Tables assigned to a table pool or table cluster are referred to as pooled tables or cluster tables.
    This table are similar to the CLUSTER table types but these work on "LINEAR SEARCH" while CLUSTER TABLE uses "BINARY SEARCH to retrieve the data from the various tables and thsi is mainly used in the logical databases "LDB's" used in HR or ABAP-HR.
    A table in the database in which all records from the pooled tables assigned to the table pool are stored corresponds to a table pool.
    The definition of a pool consists essentially of two key fields (Tabname and Varkey) and a long argument field (Vardata).
    Table Clusters Several logical data records from different cluster tables can be stored together in one physical 
    record in a table cluster.
    A cluster key consists of a series of freely definable key fields and a field (Pageno) for distinguishing continuation records. A cluster also contains a long field (Vardata) that contains the contents of the data fields of the cluster tables for this key. If the data does not fit into the long field, continuation records are created. Control information on the structure of the data string is still written at the beginning of the Vardata field.
    Regards,
    Samad.

  • Hi, i want to bulid training course before we deploy iphone in my bussiness what can i sue to make screen capture and connect iphone 4 or 4s to a projector in a classroom.thanks

    hi, i want to bulid training course before we deploy iphone in my bussiness what can i sue to make screen capture and connect iphone 4 or 4s to a projector in a classroom.thanks

    Your iPhone is probably locked to your former cell carrier. In such case only that carrier can unlock it, so you'll need to contact the carrier. Note that unless things have changed recently only 3 offers unlocking. If you used a different carrier, they do not appear to offer unlocking which means that your son will not be able to use your old iPhone. But call your carrier and ask.
    Regards.

  • I can't sync photos from my PC and get (-50) error

    I can't sync photos from my PC and get (-50) error

    Hello evilemma72,
    Thanks for using Apple Support Communities.
    If you do not see a checkbox to enable syncing photos, and instead see a message the iCloud Photos is on, then it indicates you have iCloud Photo Library enabled on your iPhone, and the photos already exist on your phone.  To learn more about iCloud Photo Library, take a look at the article below.
    iCloud Photo Library FAQ - Apple Support
    Take care,
    Alex H.

Maybe you are looking for

  • Password Reset in HP Laserjet 1536dnf MFP - Forgot the password

    It's shows Secure mode. Iam unable to Assign IP Address. It's asking for Password i have forgot the password. I have tried all the steps which has given in forum, but i could not reset the password. Please help out i should configure in Network it's

  • Help on PO- BPM Integration!

    Hello people!         Here I am again needing your knowledge of this suite. Im connecting my NWDS to the PO server and when I login into the server I can see this Iflow going from a legacy to the Integration Engine: As you can see the Iflow ends with

  • Can I able to install many instances in one database. If yes please let me

    Hi, Can I able to install many instances in one database. If yes please let me how to do in Oracle 10g and *9i*. Thanks, Senthilnathan.

  • Final Cut Pro operators manual in SPANISH?

    I'm trying to located a PDF of the Final Cut Pro operators manuals (the document that comes packaged in the software) ideally for version 6, but I'll take 5 or 7 if I have to, but written in Spanish. Does anybody know where I can find such a document

  • How to insert and retrive data from Discussion forum in Oracle Server 10g

    Hi, I have successfully deployed discussion forum, in Oracle app server 10g, and its working fine. Now, i have to implement a Moderator in this. but i am not getting an idea, where is the queries and specifications about the tables are given. Please