What can i upgrade to and how? late 2007 macbook pro

I am running tiger 10.4.11 can i go straight to mountain lion or do i need to install all 4 in between leopard snow leopard lion and then mountain lion i have a 13" late 2007 macbook pro thank you

Yes. Snow Leopard requires at least 1GB of RAM; the Mac App Store will check compatibility before allowing Mountain Lion to be purchased.
(88252)

Similar Messages

HT4783 I have an early 2010 and a late 2011 MacBook Pro, they both have the latest upgrade of Lion. Neither of them can "see" each other in AirDrop. I have reset the apple ID on both. Is there any way I can make them "see" each other?

I have a mid 2009 and a late 2011 MacBook Pro, they both have the latest upgrade of Lion. Neither of them can "see" each other in AirDrop. I have reset the apple ID on both. Is there any way I can make them "see" each other?
As far as I know the older mac is compatible with AirDrop.
Thanks

So by dual-signal, are you referring to 2.5Ghz/5Ghz signal?
I'm pretty sure my Mac mini 2011 has that but for whatever reason I cannot send via AirDrop to the mini. The mini can see other computers like my 2010 MacBook Pro and send files to it, but not in reverse. The MBP is unable to see or send to the mini unless the mini has engaged it to send a file to MBP. Even then it's temporary and the mini will disappear from the MBP's AirDrop radar upon completing the delivery of its file.
So I'm a bit perplexed on how the Mac mini has AirDrop, can see other AirDrop computers and send files to them, but cannot be seen on other Macs to reciprocate.

Spotlight and finder cannot find files as of a certain date. What can be the problem and how to solve?

Spotlight and search field in Outlook on MacBoon cannot find files as of a certain date. What can be the problem and how to solve?

Reinstall on both.
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it isthree times faster than wireless.
Restore your iPhone to reinstall iOS. Be sure to do this while connected to your computer and iTunes.
     Tap Settings > General > Reset > Erase all content and settings.

What external drives work well with a late 2011 MacBook Pro? I ask because I just found out the hard way that a Samsung EVO 840 does not. Also should I avail myself of something that works with Thunderbolt or Firewire?

What external drives work well with a late 2011 MacBook Pro (I7, Lion OS) apart from my Kingston flash and USB drive, and the SD drives that I use in my cameras and recording devices? I ask because I just found out the hard way that a Samsung EVO 840 does not. Also, should I avail myself of something that works with the Thunderbolt or Firewire connections? I'm looking to back up music and video files created and/or processed in Logic Pro and the Adobe Production Premium software suite (Premier Pro, After Effects, Audition, etc).

Hmm, not sure what problems you had installing this drive. The review here gives it good marks for Mac:
http://www.amazon.com/Samsung-Electronics-EVO-Series-2-5-Inch-MZ-7TE1T0BW/produc t-reviews/B00E3W16OU
There does seem to be a lot of prep to make it work:
"1. Preparation to install your new shiny SSD
1.a You will need a migration tool (I used the Sabrent kit USB 3.0 to Sata that was suggested in these review) see link http://www.amazon.com/gp/product/B00DQJME7Y/ref=oh_details_o03_s01_i01?ie=UTF8&p sc=1
1.b You will need to download a trim enabler (mid 2012 macbooks only support native trim with apple brand ssd's) I recommend going to cindori.org and downloading trim enabler version 3.xx. You can do this step before or after the OS migration
1.c You cannot use the Samsung SSD migration software *don't worry Mac has its own imaging/migration utility*"
Also in those reviews:
" Only down side when using this product in a Mac Mini is you will be required to download and install Trim Enabler so that your drive performs optimally on your Mac device. This is an Apple issue, not Samsung, but it is an extra step you will have to take after you install the hard drive, and any time you perform an OS upgrade." He rant's on.
Personally I only deal with OWC:
http://eshop.macsales.com/shop/SSD/OWC/
They are very knowledgable and if there's a problem they will gladly take back the item. (Never happened to me yet - 8 years and counting).
Just upgraded my 13" MBP 2011 to 120 GB for $79. Adobe CS 6 opens in 3 seconds! Awesome!
When I was in Chicago I had a pro photographer for a client. She wound up with 4 internal drives in her Pro, 4 external drives and an dual array locked in a steel vault in the basement. All from OWC. OK she was a bit paranoid. Great client though.
As far as value for price:
http://eshop.macsales.com/item/OWC/MES3FH7500G/
500 GB for $130.
However as far as reliability is concerned:
http://www.rockpapershotgun.com/2014/01/30/are-ssds-reliable/
http://www.extremetech.com/computing/173887-ssd-stress-testing-finds-intel-might -be-the-only-reliable-drive-manufacturer
So sudden power loss is an issue with SSDs.
Personally I'd go with a moderate sized SSD internally and a conventional external for backup. An array would be the most reliable.

Can i upgrade OS X Mavericks for my macbook pro laptop

can i upgrade OS X Mavericks for my macbook pro laptop ?

Check your Mac here to see if it can Upgrade to Mavericks....
http://www.apple.com/osx/how-to-upgrade/

HT1338 Serial # W87*****Z67 OS 10.7.4 is my late 2007 MacBook Pro (black) but when attempting to purchase X Lion upgrade I get message that hardware is not supported. But X Lion tech spec says mid to late 2007 Macbook pros supported. Any thoughts?

Serial # W87*****Z67 OS 10.7.4 is my late 2007 MacBook Pro (black) but when attempting to purchase X Mountain Lion upgrade I get message that hardware is not supported. But X Mountain Lion tech spec says mid to late 2007 Macbook pros supported. Any thoughts?
<Edited by Host>

See babowa Post Here... on Compatibility...
https://discussions.apple.com/thread/4136749?tstart=0

Can the apple external disc drive that I just got for my air also work with my late 2007 macbook pro? The internal disc drive broke after apple care expired, natch.

Can the apple external disc drive that I just got for my air also work with my late 2007 macbook pro? The internal disc drive broke after apple care expired, natch.

No, sorry. it won't work with the 2007 MBP. You can replace the optical drive yourself - just go shopping at OWC.
Good luck,
Clinton

Late 2007 MacBook Pro intermittent black screen

I have this very odd issue with an intermittent black screen on a late 2007 MacBook Pro (4GB/320GB 7200rpm) Mac OS X 10.6.8 v1.1
Apologies for the length of the post.
In cycles separated by a few days to a week, the screen will flicker to black, initially very briefly, then for longer periods until it is black continuously, where it stays from a few hours to a couple of days then it flickers to normal, again very briefly then with longer intervals until it is steady and normal. It can then be fine for a week or more.
When the screen is working, it's perfect; no lines, stripes, colour shift or any difference to what one would expect. When it is black, the backlight is still operational (and dimming when on battery power) but there is no image - all pixels are solid black. Shining a torch on/through the screen does not reveal any image. When mirrored, the external monitor shows the brightness adjustment moving up and down in response to the key presses but it has no effect on the internal screen.
My external display (Eizo) is always functional no matter what the built-in one is doing and is completely solid at all times.
There is no correlation to temperature (I have SMC fan control), sleep, restart, fan speed, power source or anything environmental. The MacBook is on a fan stand for most of the time. External connections make no difference. If the fault is present before changing any of these factors, it is there after.
I am aware that this machine has known vulnerabilities with GPU and display issues but none present quite like this. I have performed the usual trawl on the net and I now know more than I ever wanted to about attempts to fix it.
Software remedies attempted:
Resetting PRAM and power manager.
No sleep image file (never used this option). I deleted the old swap files that were there in any case but this unsurprisingly did nothing.
Resetting the display settings via keyboard commands or Sys Prefs.
Screen savers and settings are not implicated.
Nothing whatever in the console logs that I can see.
TechTool Pro gives video RAM a clean bill of health and all other components pass including tests on the HD with TTP and DiskWarrior.
Safe boot and booting from systems on backups seem to have no effect but one safe boot restored the screen briefly - I think it was a coincidence.
I updated the OS from 10.6.6 to 10.6.8 while this fault was coming and going and it made no difference. I usually prepare the machine for updates by running the cron jobs, repairing permissions etc.
In expectation of suffering this fault when the external monitor was not connected, I installed iScreen on the MacBook and use my iPad as a supplementary display and that works well too. Having all three operating, when the internal is functioning, is quite fun.
Hardware tests:
I removed the upper plate holding the keyboard and the interior of the machine was very clean with only some small dust accumulations in the fans, which were removed. There was no sign of any discolouration, corrosion, or other unpleasantness on the PCBs. All connectors and wiring looked good.
Every part of the logic board, cables and connectors were percussed, gently deflected and spray freezed, both while the fault was present and not (machine running) with no effect.
Display back was removed and the LCD board given the same treatment. No changes.
Display cable disconnected at both ends and tested for continuity (probe resistance accounted for) and consistency with a Fluke 87 multimeter - passed OK. On a scope, active signals and power were present on all the pins when the display was working but the fault did not occur during this test, which might have been interesting.
No apparent shorting of the display cable but without removing it this cannot be proved.
Problem not affected by hinge position, pressure on any part of the display, twisting, percussing etc.
Used compressed air to blow out the connectors which were reseated carefully.
After all this, the machine remains in exactly the same state, cycling between operational and black with various flickering stages as it comes and goes.
All I can deduce is that as the external monitor has always been OK, the GPU itself is probably working fine and the fault is more likely in the LCD panel electronics. I doesn't feel like a software issue to me but heck, I don't know what is going on.
Does anyone have any experience of something like this?
Thanks,
Joel.

Thomas,
Thanks for your post and I'm sorry you have suffered the same problems.
My trust levels are not very high because it's clear there is some systemic display problem with this model, which is why Apple are fixing them. As I mentioned, we have no idea if the replacement boards are any different to the originals. From your experience it would look like they are not and my suspicion is that it is very unlikely that Apple made a new batch of these logic boards a long time after the model was discontinued. If anyone has evidence to the contrary, I stand to be corrected.
As you say, the difference between our two faults appears to be that a physical deformation of some part of the machine does something with yours but never did with mine. At one point I felt that a short in the internal display cable seemed like the best explanation for the problem but it looks like it's more complex than that because of the behaviour of our external displays and subsequent strange booting behaviour.
If, as I have read, the soldering of the GPU was faulty and leads to progressive failure of the graphics sub-system, then all kinds of strange behaviours could arise and produce the intermittent problems we have seen. Micro-fractures of the chip interconnects would suggest that tiny movements might change the presentation of the fault. If soldering really is the issue, then keeping the machine as cool as possible will extend the life of the connections. Consequently mine will sit on a fan-stand for the rest of its days, which is no problem because it just had Win 7 installed on it and I don't want to be seen in public with it in that state ;-)
All we can conclude is that a logic board swap fixes the problem for some indeterminate period, so the problem is on that board. Whether it is a design fault with the NVIDIA chip itself or a manufacturing fault with the board is not clear but we can probably forget LCD panels, cables, sleep issues, power supplies and all the other peripheral issues unless there is yet another design issue that causes the GPU to fail.
Are you intending to present your machine to Apple for another go at a fix?

What is the best 500GB HDD for a 2007 macbook pro

what is the best 500GB HDD for a 2007 macbook pro. This is a pre unibody machine.
I am upgrading at the minute and can't make my mind up. I need a 7200rpm drive, but have heard some stories concerning overheating etc.
These are the drives I am looking at: Seagate Momentus, Hitachi Travelstar and Western Digital all 500GB, running at 7200rpm.

If you haven't already, you might look a the user comments at http://www.newegg.com on those hard drives. If you don't get other comments here, you might post in the MBP discussion (this is the iMac discussion) at https://discussions.apple.com/community/notebooks/macbook_pro

Late 2007 Macbook Pro: DVI to VGA Adapter

I lost my DVI to VGA Display Adapter for my late 2007 Macbook Pro and can only find adapters for the PowerBook G4. Will this adapter work for my Macbook Pro?
Thanks!

Yes, all of those DVI+A to SVGA/VGA adapters for Macs are the same. I have adapters from the titanium G4, aluminum G4 and intel MBP and they all have DVI and came with adapters that function the same.

Late 2007 MacBook Pro S-Video adapter no output.

I've troubleshooted everything I can, so hopefully one of you can help me!
My Fiancé's mom has a late 2007 MacBook Pro running Mountain Lion. She has an older tv, so I was wanting to mirror the display so she can watch Netflix on her TV.
After digging around on the Internet, other users said the APPLE M9267G/A adapter solved this problem without the need for a converter box, or upscaler. Needless to say, it doesn't work..
I've tested the cable, port on the computer, and they both work. I've tried running just the yellow Composite video out instead of the S video through the video in on the TV, and a VCR... Nothing.
I used my old Powerbook 1.67, which has an S Video out to the TV, and it works perfect. When I plug the adapter into the Powerbook's Dual Link DVI port, same port as the MacBook Pro, it doesn't work..
I chose S-Video, even though the TV has Component inputs, because other forums said it wouldn't work without an expensive converter box.
They said this would be the solution.
Does anyone have any suggestions?
Thanks!

Same problem, though with an early-2008 MBP. Things worked fine with 10.6.x and as soon as I went to 10.9 the external display stopped working.
The first time I plug in the adaptor (whether or not there is a video cable attached) the screen goes black and nothing shows up on the external screen. When I unplug the adaptor, I get the display back on the MBP but it's at low resolution and it has put me at the general login screen. When I put the adaptor back in the second time, it essentially locks up the display to where it is black and no key presses or adaptor removals brings the display back. I have to reset the MBP by holding down the power button. I submitted a bug report too, but have no faith Apple will do anything. Big fail, Apple.

Late 2007 Macbook pro 15inch Mavericks update?

I have a late 2007 Macbook pro 15inch which I love. Can it be updated to mavericks or must I bid it a fond farewell?
Thank you!

Your Mac originally came with 2 GB of RAM. Mavericks will run in that amount but will be slower than if you have 4 GB or 6 GB. If after you upgrade you want more speed see OWC (macsales.com) or Crucial.com for memory upgrades. They are inexpensive.

Late 2007 MacBook Pro - Fresh install

I have a late 2007 MacBook Pro. I want to do a fresh install. Is it best to use the original discs, which would take me back to tiger, or can I just use a new retail copy of Snow Leopard?
Will that retail copy of Snow Leopard hold all the proper drivers for the late 2007 mbp?

I just did a fresh install of Snow Leopard on my late 2007 MPB (I bought it in Jan 08 and it shipped with Leopard). Worked out fine, only difference is the Retail Snow Leopard doesn't bundle the iLife applications like the originals did. Other than that it went very smoothly.

I'm in need of a rubberized case for a late 2007 macbook pro 15.4 silver keys help please

please help me out I'm in need of a rubberized case for a late 2007 macbook pro 15.4 (silver keys) cd in front. Please help me out. here is my personal email: *****@gmail.com I also have just purchased a 2006 macbook pro 17 inch and would like a case for that one too if anyone can help I would greatly appreciate it.
again here is my email: ******@gmail.com
thank you
john
<Edited by Host>

John, please refrain from posting your personal email in these threads. It is not necesary and all communication to you can be done directly in these forums. Posting your email address can open up you to tons of unwanted spam, among other things. Really all you can do is search the internet for them. My suggestion would be to google "case for late 2007 macbook pro".
One will probably be very hard to find for a 6 year old model as it is on the borderline of being considered "vintage". Ebay may be a good place to try too.

Streaming content to Apple TV from Late 2007 MacBook Pro without AirPlay

What is the method of streaming content to a third-generation Apple TV from a late 2007 MacBook Pro? This Mac doesn't support AirPlay.
If this feature is not supported by Apple, what are some third-party options?

Use AirParrot > http://www.airparrot.com

What can i upgrade to and how? late 2007 macbook pro

Similar Messages

Maybe you are looking for