What can people who steal an iMac with an Admin PW do with it?

I've had my iMac stolen in my home ( as well as a MacBook, but Apple wants be to talk by product, not by problem type, ie, theft in this case)
I did not have the serial number jotted down and it was on an older OS so no icloud, so I have no easy way to track it.
Just curious as to what thieves can do with an iMAC with an Admin password on it?  Can they hack that?  Can they acces the files on the drive with some external disk or software?
Just wondering what precautionary measures I should be taking now that 2 of my Macs are in the wrong hands.

Unless your home folder or the disk was Filevaulted
http://support.apple.com/kb/PH10578then if the HD is removed, all data on it can be read.
and unless you did this :  Setting up firmware password protection in Mac OS X
then it's easy for anyone to access the data without having to remove the drive.

Similar Messages

  • How can I Registere people who are not Registered  with iMessage ?!

    How can I Registere people who are not Registered  with iMessage ?!? :(

    If they have a Mac or Apple iDevice, call them or email them and tell them to activate iMessage.
    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
    How to Send SMS from iPad
    http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
     Cheers, Tom

  • Lost my Iphone 4g, hooked up old 3gs, can't get messages from people who have me registered with ichat

    Anyone who I had previously used iChat with, can no longer send me texts now that I have had to downgrade back to a 3Gs.
    Lost my Iphone 4g, hooked up old 3gs, can't get messages from people who have me registered with ichat.
    My carrier (Rogers) says they have nothing they can do about it.
    Thanks in advance.

    Correction - iMessage, not iChat.  Too early....

  • Are people who are having prob with iTunes 8.2 & iPhone OS3.0 using Intego?

    I am wondering whether people who are having problems with iTunes and iPhone are using Intego's Netbarrier? I couldn't download OS3.0 until I turned off Banner and eventually the whole thing. Is this the cause of my problems? My iPhone is no longer recognized by iTunes 8.2.

    I want to withdraw this question as it unfairly associates many problems with this one company and application. The problems are not just related to this software. I apologize to Intego if this appeared accusatory.
    I have since found answers to all of the questions posed for the iPhone 3.0 update. Only one was related to Intego and its firewall.
    Thanks.

  • Can't back-up new iMac with fusion HD.  The back-up proceeds to within 10% of the total storage needed and then the "of" number increases.  I suspect there is a problem with backing up the fusion drive.  We have a new 3 TB time Capsule.  Any ideas?

    Can't back-up new iMac with fusion HD.  The back-up proceeds to within 10% of the total storage needed and then the "of" number increases.  I suspect there is a problem with backing up the fusion drive.  We have a new 3 TB time Capsule.  I tried excluding different parts of the software from the back-up but it didn't make any difference.  I even tried exluding "invisible items" to no avail.  Any ideas?

    When you setup the wireless and ethernet in the computer.. ipv6 will be on automatic.. this is wrong for the latest TC firmware and airport utility. http://support.apple.com/kb/TS4597
    Go to the wireless and ethernet setup in preferences and change ipv6 to link local.
    Once you do the big backup by ethernet the wireless will function fine for incremental.. it is obviously not estimating the size correctly..
    A full back-up on the iMac would be about 650 GB.  The partial updates that I have been trying start out at 115MB and keep growing indefinitely.  The original back-up never finished nor have any of the follow-up attempts.
    The first estimate should be the full backup but it will keep growing as the backup advances.. I would also delete any inprogress files to make sure it is not messing up .. delete even a sparsebundle if there is one for the imac on the TC and start afresh once you have ethernet connection.
    See A10 here.
    Pondini may have some other clues there to give you an idea of why the backup is slow or not finishing.. there is a lot of issues with TM when it decides not to work.

  • I just lost all recent updates to my iCal from the last days. Can this possibly happen ??? What can I do to restore iCal with the most recent updates?

    Hello All, yesterday afternoon I just lost all recent updates to my iCal from the last days. How can this possibly happen ??? It may have occured after I chose the Refresh function after I had problems searching my iCal for a particular event. I think my iPhone was also not properly synched in the morning but I didn't pay it much attention and opened iCal on my MacBookAir instead.
    How can I prevent this from happening again?
    What can I do to restore iCal with the most recent updates?

    Random glitch.  It doesn't matter; if you didn't backup the data, then you can't recover the data.
    In the future, for any 'important' data, back up that data regularly.  Forward the 'important' text messages to your email.  Trasnfer your photos & videos to your computer, etcetera.

  • I am wanting to print my iCal calendar, as use it for bookings but not include entries calendar from other people who I've synced with.

    I am wanting to print my iCal calendar, as use it for bookings but not include entries calendar from other people who I've synced with.

    GACU,
    OK, now I think I understand your problem.
    If it is your calendar that is being shared with other users who have been granted editing priviliges, you will not be able to exclude those events from printing.

  • HT204291 can i mirror from my iMac  with OS X ?

    can i mirror from my iMac  with OS X ?

    Welcome to the Apple Community.
    AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). It also requires the computer to be using wi-fi.

  • What can an evil some one do with your system profile data?

    What can an evil some one do with your system profile data?

    Read it back to you in an evil sounding voice
    Absolutely nothing

  • What firewire will connect 27 inch IMac with Cannon GL2 digital camcorder

    What firewire will connect 27 inch IMac with Cannon GL2 digital camcorder?

    According to the Canon spec's a > 4 to 9 pin firewire cables is what you will need, provided that you have a slightly older 27" iMac that still has a FireWire 800 port. 

  • What can I expect of my 4s with wifi  connectivity. My 4s receive a signal from the same router I have always used. My 3G would pick up a signal throughout the house, and my 4s won't allow me out of the room. Is my new phone defective or just inferior.

    What can I expect of my 4s with wifi  connectivity. My 4s receive a signal from the same router I have always used. My 3G would pick up a signal throughout the house, and my 4s won't allow me out of the room. Is my new phone defective or just inferior.

    4S at my house have stronger antenna than 3G iPhone. Reset Network Settings, tap Settings App>General>Reset, near bottom>Reset Network Settings. If still problem take to Apple for Warranty Coverage.

  • Okay, can everyone who has no issues with the 3G i phone please tell all?

    Have been reading all the threads where the i-phone 3 G is failing badly... Could people who are happy, post their thoughts on why they are happy and what's working really well.... It would be good to hear of people not dropping signals and getting fast 3 G speeds....

    I've been posting this a couple places because I keep seeing people with the same problems posting...no search = hard to find answers.
    My iPhone doesn't do the perma-crash anymore when I get interrupted while installing apps, and when I sync my phone it doesn't try to do a backup every time, even if I install new apps or uplug/replug. Here's how:
    http://discussions.apple.com/thread.jspa?messageID=7636178
    Oh, and everything else is great. AWESOME 3G support in Virginia Beach, VA, LOVE the multi-delete in mail, really happy with GPS and some of these cool apps coming around.

  • What can a non-coder reasonably accomplish with ADDT?

    Sorry to post again, but I suppose this is my fundamental issue: Apart from sprucing up forms with validation, etc. (which is of course nothing to sniff at), what can an independent web designer with limited PHP coding experience (and limited time to develop coding skills) reasonably use ADDT for?

    Paul,
    ADDT at it's most basic allows for creating tools that interact with a database. Both for submitting data, editing data, and displaying data.
    It makes it simple to create forms and dispay data because it connects directly to your database and reads in the database structure. This is a big time saver.
    Hand coding forms in PHP and doing all the validation manually takes a lot of time. One of the reasons is that almost every form you make is different from the last one. You have to manually add all the form fields and match them to your database fields. ADDT creates the forms based on your database structure and allows for a lot of customization and helps cut down on a lot of typing errors.
    Also, hand coding pages to display lists of data that does sorting and pagination also takes way too much time. The ADDT Dynamic List saves me more time than I can quantify. It reads the info from the database and asks you how you want it displayed. The list it creates
    is sortable, searchable and has pagination. Not to mention it allows you to delete, edit and add records when paired with the Dynamic Form Wizard.
    To answer your question: "what can an independent web designer with limited PHP coding experience (and limited time to develop coding skills) reasonably use ADDT for?"
    You can use it to create robust forms for entering, editing and deleting data. In these forms you can add lots of cool things like dependent dropdowns, date pickers, file uploading and email triggers just to name a few.
    Next you can easily display data from your database. The Dynamic List Wizard paired with the Dynamic Form Wizard allows you to create lists of data that are sortable, searchable, and editable. You can even add and delete records. There are also a lot of tools for displaying data on the front end of the site.
    The ease at which this can be done is hard to explain when compared to hand coding. I think anyone can use these tools with minimal programming skill.
    However, you are limited in some ways by lack of programming knowledge. The more complex your needs for manipulating the data entered are, the more programming knowledge you need. ADDT allows you to easily take data and put it in a database. If you need to change the value of the data, or calculate a new value based on what the customer entered, you would have to do hand coding using ADDT Custom Triggers.
    For me the price has been completely justified by the time I save over hand coding. Someone with a little coding ability will benefit most from ADDT. People with limited ability can easily create forms and list, but they are limited by their ability to manipulate data and do custom routines that are required for more dynamic sites(real estate sites, ticketing systems, or ecommerce sites for example).
    I'm always so longwinded :)
    Shane

  • Can people listening to my iTunes with Home Sharing modify my songs?

    If I enable Home Sharing with a password for my household, can others who listen to my songs also change my song ratings, metadata, etc.? Or is there some way to disable them from doing so?
    Also, if I set "Remember password" for someone connected to my iTunes, how do I later "forget" that password on their computer?

    iTunes: Setting up Home Sharing on your computer - http://support.apple.com/kb/HT4620
    see also Music Sharing which is different
    Music Sharing - http://support.apple.com/kb/HT2688

  • Can I configure a new imac with separate ssd and hd

        I don't know for sure if it's been announced so this information may not be out there and I realize we are not supposed to speculate. Havinvg said that can anyone comment on whether it will be possible to configure a new iMac with both and SSD and HD drive without using a fusion drive?
       For video editing I don't think I want a fusion drive. I'm either going to get a refurb soon or wait ... and the whole fusion thing is such an unknown for video editing. If I order without more vid editing information  with regard to a fusion drive I'd probably want an SSD boot and internal.... I'd use my externals for most work but an ssd plus internal hd would be nice.
       thoughts?

    Based on the tech specs here, it appears the 27" iMac has one space for hard drive, fusion drive, or SSD, which are orderable on a build-to-order system.

Maybe you are looking for

  • Error while generating PDF ( BEx Web Analyzer )

    Hi, Is there any limit to the number of pages we can print using ADS? We always get " Error while generating PDF" Error when we try to print reports with more than 500 lines. Thanks Niveda

  • HP Photosmart 7960 Not Shown in Print Drivers

    I finally pulled the trigger and bought a MacBook Pro last Monday. I have a lot to learn having come from a PC background. I have an HP Photosmart 7960 printer hard-wired to a desktop PC running Windows XP. I use a wireless network with a Linksys rou

  • Change user password with CUA

    When I attempt to change a password on a CUA child, I enter tocde SU01 and enter the account. The I was to reset password via the icon. When I select the change password icon (shift+ F8) and then the popup window appear to prompting you to enter and

  • Hierachy datasource problem

    Hi, I have to load hierarchies from r/3 to BW.when i test my hierarchy DataSource in RSA6 number of records its showing is 40,where as my R/3 system has 45 records for the same hierarchy.Can any one please let me know why its showing different number

  • Xml tree

    Hi what i was trying to do is there is an xml like the below shown( a sample part not completely) <node_name>node content </node_name> and i used the function as below which return a string of item.@label what should be the return type so i get the n