What car audio units are compatible with the older CDX757MX 10 disk CD changer?

I would like to replace my car audio unit with one that can control the CDX757MX changer and also have an mp3 jack in the front. I know my current one is 10 years old. It still works but I want to still use the changer and also be able to plug in my mp3 player.
Thanks John

I know this is a very old post but I have the same situation. I have two CD changers, the CDX757MX. I would like to buy a Sony stereo (used apparently) that will control 1 or both of them. I would really like to have a model with Bluetooth capability. Does such a stereo exist?
Could I please get a list of the compatible units for this changer?
Thanks,

Similar Messages

  • What audio interfaces are compatible with the iMac/Intel computer?

    I see that MOTU has Intel-compatible drivers for its high-end audio interfaces. Are there any other audio interfaces--USB or Firewire--that are at present compatible with the Intel Duo Core machines that are under $300? I've checked with Tascam and Presonus, and theirs are not yet compatible. I have an inquiry in to M-Audio, but haven't heard back yet.
    PS: Does anyone else think it is just a teensy bit dishonest of Apple to be selling audio interfaces in its online store without pointing out explicitly that they don't work on the Intel machines?

    Well, it looks like M-Audio's Firewire Solo has a beta driver available for the Duo Core. Better than a poke in the eye with a sharp stick. And it's well under $200 at a couple online stores.

  • What Bluetooth headsets are compatible with the iphone 4

    What Bluetooth headsets are compatible with the iphone 4

    All headsets which support
    Ctp for just calls
    A2dp for all audio
    Read more here
    http://en.wikipedia.org/wiki/Bluetooth_profile
    http://support.apple.com/kb/ht3647

  • What monitors are compatible with the Mac mini?

    What monitors are compatible with the Mac mini?

    Is this the new Mini?
    Most any Thunderbolt, HDMI, DVI, or VGA monitor will work with the new Mini, though many problems exist with the HDMI port it seems.
    Video Card:
    HD Graphics 4000
    VRAM Type:
    Integrated
    Details:
    This model has an Intel HD Graphics 4000 graphics processor that shares memory with the system.
    Standard VRAM:
    512 MB*
    Maximum VRAM:
    512 MB*
    Display Support:
    Dual Displays
    Resolution Support:
    1920x1200*
    2nd Display Support:
    Dual/Mirroring*
    2nd Max. Resolution:
    2560x1600*
    Details:
    *This model simultaneously supports 1920x1200 on an HDMI or a DVI display (using the included HDMI-to-DVI adapter) and 2560x1600 on a Thunderbolt or Mini DisplayPort display or even a VGA display (with an optional Mini DisplayPort-to-VGA adapter, which is compatible with the Thunderbolt port).
    http://www.everymac.com/systems/apple/mac_mini/specs/mac-mini-core-i7-2.6-late-2 012-specs.html

  • What cameras are compatible with the ipad ?

    What cameras are compatible with the I pad?

    With the camera connection kit you're able to plug in regular SD cards with one adapter, while the second adapter does include a USB port to plug your camera in. I just remember reading that "most cameras" are compatible.

  • What printers are compatible with the airport extreme?

    What printers are compatible with the airport extreme?

    Virtually any wireless printer will work just fine as well as a printer that connects using Ethernet. If you are looking at an All-in-One type of device....all functions like print, scan, copy, maintenance, etc will be supported.
    If you are looking at USB devices, Apple does not provide a list of compatible models, so It is difficult to say with certainly what will work and what will not. In general, most USB printers will work.
    But....very important....if you are looking at an All-in-One USB device, you need to keep in mind that only the print function will work when the device is connected to the USB port on the AirPort Extreme. Scan, copy, fax, maintenance, etc. will not be supported.
    Bottom line...if you are looking at an All-in-One device and you need all of the functions, you need to choose a device that connects using wireless only or Ethernet, not USB.

  • What cameras  are compatible with the camera connection kit

    what cameras are compatible with the camera connection kit and ipad2

    I also recently bought the camera kit and found that it worked fine as long as you don't format the SD card using PC. Once I re-formatted using my camera I could once again upload my photos. that was until I switched formats to Adobe RAW, it seemed unable to upload again. So I switched to S RAW and that worked fine. Sometimes my kit won't upload photos but I find that by just re-inserting the card it works fine.
    Haven't tried video yet, but I recently learned that the devices are quit sensitive to the "Format"(that needs to be FAT32, or exFAT- but in this instance it needs to be formatted by a Mac).
    Good luck

  • What joysticks are compatible with the MacPro please?

    What joysticks are compatible with the MacPro please?

    average typical games on the Mac.
    Well, That narrows it......
    Many games simply rely on mouse control via alternate USB device.
    In OS X, joystick to mouse control may be of interest:
    https://discussions.apple.com/thread/391977?start=0&tstart=0
    The mentioned USB Overdrive will enable that which many devices can't do in OS X and have separate drivers for in Windows.
    BTW, I use a Logitech with many average, typical games on a Mac.......

  • HT4859 what does it mean if my new iphone says that iCloud backup are compatible with the version of iOS (6.0.2) on this iblePhone

    I am trying to back up my fiels from old iPhone 3S to the new one I have just bought using iCloud and when I am doing it, my new iphone 5 is writing thet iCloud back-up are compatible with the version of iOS  (6.0.2) on this iPhone. What does it mean?

    I just worked on this same issue for someone else at work (iPhone 4 or 4S up to date). The iPhone 5 needs to be up to date to the newest version of IOS
    Here is what I did:
    1. Got into the iPhone 5 without using an account
    2. After getting in, it shows that there is an update
    3. Completed the update
    4. After the phone rebooted,  went in and completed a reset of the phone to factory
    5. When it came back up followed prompts and was able to restore from iCloud backup.
    Hope this helps

  • What usb keyboards are compatible with the Intel iMac

    Please can someone tell me what USB Apple Keybouards are compatable with the intel Imac
    howard

    Some PC keyboards may not work with the Mac. Especially, specialty gaming keyboards will not work with Macs and OS X.  Some PC keyboards are designed to specifically work with newer versions of Windows at that's it!
    They may not even work as a basic keyboard, but not entirely sure.
    I know for a fact specialty gaming keyboards do not work at all on a Mac because there have been posts here from gamers who tried to use special gaming keyboards and mice and they would not function on a Mac.
    If you know anyone with a Mac, ask them if they have a spare Mac keyboard you can try before buying.
    Good Luck!

  • Content Tab: None of the fact tables are compatible with the query request

    Hi All,
    **One thing I am not clear yet of all my years with OBIEE is working with the content tab in BMM.**
    I have made a rpd the joins in physical layer as shown below:
    https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056545119428530
    And the BMM layer as:
    https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056519553812930
    Error I am getting when i run a request from the 3 columns from the selected 3 tables is:
    Dim - Comment Code Details
    Fact - Complaint
    Dim - Service Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14020] None of the fact tables are compatible with the query request Sr Num:[DAggr(Fact - Complaint.Sr Num by [ Dim - Service Details.Sr Cat Type Cd, Dim - Comment Code Details.Cmtcode name] )]. (HY000).
    I get no error for consistency.. I read everywhere and I know i need to set the appropriate aggregation levels in the various dims and facts LTS properties to help OBIEE understanding our model, but how to do that.. how do i decide... how should I approach, what should be the aggregation level, what details.
    When i click More button i see different options: Copy, Copy From, Get Levels, Check Level, what do these mean.
    Aggregation Content, group by - Logical Level or Column which one should i choose and how should I decide.
    Can anyone explain the Content Tab in details and from scratch with some example and why we get these errors.... I know many people who are well versed with many other things related to RPD but this. A little efforts of explaining from you guys will really be appreciated.
    Thanks in advance,
    Dev

    Hi Deepak,
    Option 1:
    My tables in physical layer are joined as below:
    D1--> F1 <--D2--> F2 <--D3
    Same way i model it in BMM
    D1--> F1 <-- D2--> F2 <--D3
    Here D1 is non Conformed Dimension for F2 and D3 is non Conformed dim for F1. Later create Dimensional hierarchies, I tried setting up the content levels
    I go Sources>content tab of Fact F1 I set
    Dimensions----------- Logical level
    D1---------------------- D1 Detail
    D2---------------------- D2 Detail
    D3---------------------- D3 Total
    then, I go Sources>content tab of Fact F2 I set
    Dimensions----------- Logical level
    D1---------------------- D1 Total
    D2---------------------- D2 Detail
    D3---------------------- D3 Detail
    Then, I also go in all the dimensions and set their content levels to Details, but it still gives me errors not sure where I am going wrong in setting the content levels.
    I need to know whether the way I have modeled it in BMM is right,
    Option 2:
    I can combine the two facts in a single Logical Fact or the above design should also work.
    (F1&F2)<--D1, D2 , D3 joined separately using complex logical joins.
    what will be the content tab details?
    Thanks,
    Dev

  • Trying to back up iCloud from a lost iPhone 5 to a new one but Choose backup option says "No iCloud backups are compatible with the version of iOS (7.1) on this iPhone" previous phone was at version 8.1.3

    I recently lost my iPhone 5 and purchased a refurbished one on line, I'm trying to backup by iCloud to the new phone but when I get to the "Choose backup" screen I'm told "No iCloud backups are compatible with the version (7.1) on this iPhone". My previous iPhone had up to version 8.1.3. Now I'm stuck in the backup screen and can't get back to settings.  How can I finish the backup and how do I get out of backup mode to possibly update to the version I need?

    Hi AppleRobertion,
    What you are going to need to do here is update your iPhone's version of the operating system to a version at least as new as the one on your backup - iOS 8.1.3. To do this, follow the directions in this article -
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Specifically -
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    Once the update is complete you should be able to restore from your backup.
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • Essbase answers - None of the fact tables are compatible with the query request "member"

    Hi,
    I have modelled an Essbase database into the repository.
    If I pull the measure, period and year dimension in and filter on the year (member) and display the year (member) along with the period (alias) and measure it errors with =>
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Fiscal Year.Fiscal Year Code. (HY000)
    However, all other things being equal if I change the year displayed to the alias then it works.
    Anyone tell me why??
    Is there a limitation that Essbase brings through that you cannot view what you filter on?
    thanks,
    Robert.

    Hi
    i have done the content level setting in each of the table, D1,F1 and F2(LTS), now i am getting the following error..
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table Gl Sets Of Books) does not contain mapping for [Code Combinations.Code Combinations.Affiliate, GL Balances.GL Balances.Currency Code, GL Balances.GL Balances.PTD_Balance, Gl Sets Of Books.Gl Sets Of Books .SoB Name]. (HY000)
    Gl Balances : D1
    Code Commbination: F1
    Gl Sets Of Books : F2
    I have checked the joins in physical and BMM layer..all are fine..

  • Fact tables are compatible with the query request

    Hi,
    i am using 11g.In 10g working fine without any error.After migrate 10g into 11g below error will returning. What is the problem and How we will fix.Could you pls let me know.Thanks
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request FACT_AGENT_TIME_STATISTICS.FKEY. (HY000)
    SQL Issued: SELECT s_0, s_1, s_2, s_3, s_4, s_5, s_6, s_7, s_8, s_9, s_10 FROM ( SELECT 0 s_0, "Team Performance"."DIMENSION - LOCATION"."COUNTRY CODE" s_1, "Team Performance"."DIMENSION - TIME"."BUSINESS DATE" s_2, CASE WHEN "Team Performance"."DIMENSION - TEAM"."ROLE" ='TEAM LEADER' THEN 'Team Leader' ELSE "Team Performance"."DIMENSION - TEAM"."TEAM" END s_3, CASE WHEN '30 Mins Interval' ='15 Mins Interval' THEN "Team Performance"."DIMENSION - TIME"."15 Mins Interval" ELSE "Team Performance"."DIMENSION - TIME"."30 Mins Interval" END s_4, ((SUM("Team Performance"."FACT - AGENT CALL STATISTICS"."TIME - ACD CALL HANDLING"+"Team Performance"."FACT - AGENT CALL STATISTICS"."TIME - AFTER CALL WORK (ACW)")+SUM("Team Performance"."FACT - AGENT TIME STATISTICS"."AVAILABLE TIME"))/60)/(COUNT(DISTINCT "Team Performance"."FACT - AGENT TIME STATISTICS"."DATE ID")*"Team Performance"."FACT - AGENT TIME STATISTICS"."INTERVAL TYPE") s_5, (SUM("Team Performance"."FACT - AGENT TIME STATISTICS"."AUX3 - TRAINING"+"Team Performance"."FACT - AGENT TIME STATISTICS"."AUX4 - MEETING"+"Team Performance"."FACT - AGENT TIME STATISTICS"."AUX5 - PROJECT"+"Team Performance"."FACT - AGENT TIME STATISTICS"."AUX6 - COACHING")/60)/(COUNT(DISTINCT "Team Performance"."FACT - AGENT TIME STATISTICS"."DATE ID")*"Team Performance"."FACT - AGENT TIME STATISTICS"."INTERVAL TYPE") s_6, (SUM("Team Performance"."FACT - AGENT TIME STATISTICS"."STAFFED TIME")/60)/(COUNT(DISTINCT "Team Performance"."FACT - AGENT TIME STATISTICS"."DATE ID")*"Team Performance"."FACT - AGENT TIME STATISTICS"."INTERVAL TYPE") s_7, COUNT(DISTINCT "Team Performance"."FACT - AGENT TIME STATISTICS"."DATE ID")*"Team Performance"."FACT - AGENT TIME STATISTICS"."INTERVAL TYPE" s_8, MIN("Team Performance"."DIMENSION - TIME"."FULL DATE TIME") s_9, REPORT_AGGREGATE(((SUM("Team Performance"."FACT - AGENT CALL STATISTICS"."TIME - ACD CALL HANDLING"+"Team Performance"."FACT - AGENT CALL STATISTICS"."TIME - AFTER CALL WORK (ACW)")+SUM("Team Performance"."FACT - AGENT TIME STATISTICS"."AVAILABLE TIME"))/60)/(COUNT(DISTINCT "Team Performance"."FACT - AGENT TIME STATISTICS"."DATE ID")*"Team Performance"."FACT - AGENT TIME STATISTICS"."INTERVAL TYPE") BY CASE WHEN '30 Mins Interval' ='15 Mins Interval' THEN "Team Performance"."DIMENSION - TIME"."15 Mins Interval" ELSE "Team Performance"."DIMENSION - TIME"."30 Mins Interval" END, CASE WHEN "Team Performance"."DIMENSION - TEAM"."ROLE" ='TEAM LEADER' THEN 'Team Leader' ELSE "Team Performance"."DIMENSION - TEAM"."TEAM" END) s_10 FROM "Team Performance" WHERE (("DIMENSION - TIME"."BUSINESS DATE" BETWEEN timestamp '2012-11-23 00:00:00' AND timestamp '2012-11-23 00:00:00') AND ("DIMENSION - LOCATION"."COUNTRY CODE" = 'US') AND ("DIMENSION - LOCATION".DEPARTMENT = 'CSG')) ) djm FETCH FIRST 65001 ROWS ONLY

    Back up your repository before following these steps:
    1 Reduce the problem report to minimum number of columns required to generate the error. This will usually identify which dimension and which fact are incompatible.
    2 Open the repository in the Administration tool and verify that the dimension and fact table join at the physical layer of the repository
    3 Verify that there is a complex join between the dimension and the fact in the business layer.
    4 Check the logical table sources for the fact table. At least one of them must have the Content tab set to a level in the hierarchy that represents the problem dimension. This is usually the detailed level.
    5 Check the logical table source Content tab for the dimension table. Unless there is a valid reason, this should be set to blank.
    6. Save any changes to the repository.

  • None of the fact sources for [column] are compatible with the detail filter

    Hi Experts,
    I am using obiee 11.1.1.7.
    Getting below error when i add a filter of non conformed dimension column.
    Below is the error
    Error Details
    Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P 
    State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14023] None of the fact sources for [column] are compatible with the detail filter
    Please help in solving an issue.
    Regards,
    NN

    Hi NN
    You need to follow steps in below link to model your BMM layer for the report to work with non confirmed dimensions.
    http://obibb.wordpress.com/2010/05/31/multiple-fact-reporting-on-non-conforming-dimensions/
    Once you have followed these steps you can use the non confirmed dimension in the reports.When you see the logs to see the query generated by obiee,it generated 2 queries 1 with confirmed dimension and other with non conformed dimension.When you filter using non confirmed dimension you will now not notice any error but the results will not be filtering out because the filter will be applied only in 1 query which is valid
    Now for this to work what you can do is ,instead of using the filter drag the column you like to filter as a prompt in your view.default it to the value you need using the case statement and hide it.This is one of the work around.
    There may be many other work arounds for this but you need to understand that for you requirment to work you need to tweek OBIEE to generate 1 query instead of 2  queries.

Maybe you are looking for