What card would i need to see a clear, square 1 microsecond pulese?

Im going to be working with some pulses that may be as little as 1 microsecond, I need a card that I can see this pulse as a square. I will be measuering the amplitude of the pulse is this makes a difference. Currently I have an E-Series DAQ card that isnt going to be cutting it for me, even at 10 microseconds it isnt that clear, but still not nearly as bad as it is with 1, which seems to turn out more like a sharp point that a square. Ive heard somthing about possibly useing a counter/trimer card for somthing like that, but honostly I really dont know too much about them. If anyone has any ideas of what I would need it would be greatly appreciated, as well what sampling rate would I need?
Thanks
-Mark

A counter timer would do the job if all you are interested in is a pulse width measurement. Nyquist says you need a sample rate at least twice the signal frequency. You won't see anything close to a square wave at 2X but it might be sufficient depending on what kind of tolerances you're dealing with and how much overshoot/undershoot is liable to be present. A 10 Msample daq board gives you a sample every 100 nsec. If the amplitude that you're interested in is at the center of the pulse, I'd think this sample rate would be ok.

Similar Messages

  • What card would I need to terminate MPLS?

    I am thinking I would need a couple of VWIC2-2MFT-T1/E1's?
    I have two routers where I need to purchase some sort of T1  module that can terminate a connection for MPLS.  All things being equal I guess  I’d like to install a module that can support two T1’s.
    I’m including the sh ver and sh inventory for each  site.
    Please let me know if you need additional  information.
    GW-MAD#sh ver
    Cisco IOS Software, 2800 Software (C2800NM-ADVSECURITYK9-M), Version 12.4(15)T7, RELEASE SOFTWARE (fc3)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2008 by Cisco Systems, Inc.
    Compiled Wed 13-Aug-08 17:09 by prod_rel_team
    ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
    GW-MAD uptime is 1 year, 30 weeks, 4 days, 10 hours, 2 minutes
    System returned to ROM by Reload Command
    System restarted at 21:59:36 CST Wed Nov 4 2009
    System image file is "flash:c2800nm-advsecurityk9-mz.124-15.T7.bin"
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    Cisco 2811 (revision 53.51) with 249856K/12288K bytes of memory.
    Processor board ID FTX1315A01A
    2 FastEthernet interfaces
    1 Virtual Private Network (VPN) Module
    DRAM configuration is 64 bits wide with parity enabled.
    239K bytes of non-volatile configuration memory.
    62720K bytes of ATA CompactFlash (Read/Write)
    Configuration register is 0x2102
    GW-MAD#sh inventory
    NAME: "2811 chassis", DESCR: "2811 chassis"
    PID: CISCO2811         , VID: V06 , SN: FTX1315A01A
    GW-NY#sh ver
    Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.0(1)M4, RELEASE SOFTWARE (fc1)
    Technical Support: http://www.cisco.com/techsupport
    Copyright (c) 1986-2010 by Cisco Systems, Inc.
    Compiled Thu 28-Oct-10 18:32 by prod_rel_team
    ROM: System Bootstrap, Version 15.0(1r)M9, RELEASE SOFTWARE (fc1)
    GW-NY uptime is 18 weeks, 6 hours, 10 minutes
    System returned to ROM by reload at 03:00:00 EST Tue Feb 1 2011
    System restarted at 03:01:24 EST Tue Feb 1 2011
    System image file is "flash0:c2900-universalk9-mz.SPA.150-1.M4.bin"
    Last reload type: Normal Reload
    Last reload reason: Reload Command
    This product contains cryptographic features and is subject to United
    States and local country laws governing import, export, transfer and
    use. Delivery of Cisco cryptographic products does not imply
    third-party authority to import, export, distribute or use encryption.
    Importers, exporters, distributors and users are responsible for
    compliance with U.S. and local country laws. By using this product you
    agree to comply with applicable laws and regulations. If you are unable
    to comply with U.S. and local laws, return this product immediately.
    A summary of U.S. laws governing Cisco cryptographic products may be found at:
    http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
    If you require further assistance please contact us by sending email to
    [email protected].
    Cisco CISCO2901/K9 (revision 1.0) with 483328K/40960K bytes of memory.
    Processor board ID FTX145001FM
    2 Gigabit Ethernet interfaces
    1 Serial interface
    DRAM configuration is 64 bits wide with parity enabled.
    255K bytes of non-volatile configuration memory.
    254464K bytes of ATA System CompactFlash 0 (Read/Write)
    License Info:
    License UDI:
    Device#   PID                   SN
    *0        CISCO2901/K9          FTX145001FM
    Technology Package License Information for Module:'c2900'
    Technology    Technology-package          Technology-package
                  Current       Type          Next reboot
    ipbase        ipbasek9      Permanent     ipbasek9
    security      None          None          None
    uc            None          None          None
    data          datak9        Permanent     datak9
    Configuration register is 0x2102
    GW-NY#sh inventory
    NAME: "CISCO2901/K9 chassis", DESCR: "CISCO2901/K9 chassis"
    PID: CISCO2901/K9      , VID: V02 , SN: FTX145001FM
    NAME: "WAN Interface Card - HWIC CSU/DSU on Slot 0 SubSlot 0", DESCR: "WAN Interface Card - HWIC CSU/DSU"
    PID: HWIC-1DSU-T1      , VID: V01 , SN: FOC14472D53
    NAME: "C1941/C2901 AC Power Supply", DESCR: "C1941/C2901 AC Power Supply"
    PID: PWR-1941-2901-AC  , VID:    , SN:
    GW-NY#

    Both 3800 and 3900 series support T1 interfaces.  I see, you already have one serial interface in your 3900.
    As for MPLS,  you don't have to necessarily run MPLS.  You can peer from each location with the service provider and let them take care of MPLS/VPN etc...
    http://www.cisco.com/en/US/products/ps5855/products_relevant_interfaces_and_modules.html
    HTH

  • Is it possible to connect my 2008 black macbook, to my new 2014 macbook pro retina display screen to make a dual monitor. If this is possible what cables would I need to buy?

    Is it possible to connect my 2008 black macbook, to my new 2014 macbook pro retina display screen to make a dual monitor. If this is possible what cables would I need to buy?

    You can try using Screen Sharing in the Sharing preferences. Or try a third-party utility such as ScreenRecycler.

  • I can't see my facebook games on my mac. what app do i need to see the display and play my games?, i can't see my facebook games on my mac. what app do i need to see the display and play my games?

    i can't see my facebook games on my mac. what app do i need to see the display and play my games?, i can't see my facebook games on my mac. what app do i need to see the display and play my games?

    I don't play any Facbook games, but I'm assuming that they are played using your browser (Safari, Firefox, etc.).
    Clinton

  • Can I use my imac as an external display for a PC? If so, what cables would I need?

    Can I use my imac (intel 2008) as an external display for a PC (Dell 2002)? If so, what cables would I need?

    No.

  • What software would I need to copy and burn DVD's

    What software would I need to copy and burn DVD's

    Copy what kind/type of DVDs?  For non-copy protected DVDs you can use Disk Utility (in the Applications folder) to make a disk image of the DVD disk and then burn it back to a disk.
    OT

  • I got an old Apple G5 shell from Goodwill. I'd like to salvage the Superdrive and use it as an external drive for my Apple laptop. Is this possible, and what cables would I need if so?

    I got an old Apple G5 shell from Goodwill. I'd like to salvage the Superdrive and use it as an external drive for my Apple laptop. Is this possible, and what cables would I need if so?
    Other info is available:
    Superdrive MFG date: Sept 2009
    Model: DVR-118LBK DVD-R/RW Writer Unit
    My Macbook is: Mid-2010, running Mavericks
    Thanks in advance, God bless!

    That's a nice Pioneer DVD±RW drive - and an upgraded replacement for the original optical drive that shipped with that G5.  For a finished look, you'd want to install it in an external enclosure for 5.25" IDE/ATAPI drives that converts it to USB connectivity.  Because SATA optical drives have replaced ATAPI drives in recent years, the selection is getting more limited for a new enclosure, although used ones can undoubtedly be found at ebay.  Here's an example of one, although it only features USB connectivity.  You can also find enclosures that have both FireWire and USB connectivity, which for Mac users is beneficial.  Booting the computer (if needed) by a FireWire-connected device is generally more reliable than USB booting.  If this isn't important to you, then a USB-only enclosure would be adequate.  The enclosure will have directions, but essentially all you need to do is plug in the power cable and data ribbon cable and then secure the drive to the bottom plate of the enclosure with the included machine screws.

  • I s Final Cut X compatable with Sony HXR MC50E?  What software would I need to make this camera compatable with FC7?

    Is FCP X compatable with Sony HXR MC50E?  What software would I need to make thia camera compatable with FCP 7

    I import media from anothe SONY HXR series camera all the time...

  • I want to paint my motorcycle different colors what product would i need?

    I want to paint my motorcycle different colors what product would i need?

    Do you mean that you downloaded Photoshop to your computer, or that you are using Photoshop.com? In the second case, the correct forum is the following: http://forums.adobe.com/community/photoshopdotcom/photoshopdotcom_general

  • If i were to get this computer would i need a new network for this or what accessories  would i need?

    If i were to get this computer would i need a new network for this or what accessories  would i need?

    If you have WiFI which is not something extremely specific, and I believe it is not - you are fine with network, just go and buy you a computer and enjoy.

  • If I buy anApple MacBook Pro MGXC2LL/A 15.4-Inch Laptop with Retina Display (NEWEST VERSION)MOTHERBOARD, CPU AND CHASIS ONLY what else would I need to buy to get it fully functional?

    If I buy an Apple MacBook Pro MGXC2LL/A 15.4-Inch Laptop with Retina Display (NEWEST VERSION)MOTHERBOARD, CPU AND CHASIS ONLY what else would I need to buy to get it fully functional?

    Mac 101
    http://www.apple.com/support/switch101/
    http://www.apple.com/support/mac101/
    http://www.apple.com/support/macbookpro

  • What Features Would YOU Like To See Added To Encore?

    I'm a relative newbie to DVD authoring, though I've completed hundreds of successful Projects. I also have used few other authoring programs, before Encore. I'd be interested in hearing what others would like to see added to Encore. This is kinda' like your "Feature Request," but it's really only for my interest and edification, as I cannot imagine Adobe reading the Lounge forum.
    To date, every thing that I have wanted to do has been accomplished by either reading this forum, a couple of books or asking specific questions, and then using various workarounds. Maybe I have not set my DVD authoring sights high enough. That's why I'm posing my question to you. I also hope to get ideas for neat "things," that I never even have thought about.
    Thanks,
    Hunt

    A real coaching app would be much appreciated.  All the one alread offered does the samething... designing drills.
    We (the coaches) need more than that, we need something to allow us follow and take note, comment our teams/players/coach.

  • What solutions would be needed for the following scenario

    I have a client who operates two companies.
    One company manufactures a specific piece of equipment.
    The other company rents, sells and services this piece of equipment.  This equipment consists of three major interchangeable components.
    They need to track:
    Customer information u2013 company name, contact person, start date, end date, sold or rental unit, service schedule on the three major components.
    Equipment information u2013 where it is, which components it consists of, service records, forecast of service requirement, data on each specific component.
    Job information u2013 field tickets, work orders, distance traveled for installations and service work, how long  units have been running.
    Revenue information u2013 all pertinent information as well as what was billed and when.
    Inventory information u2013 all pertinent information as well as which parts have been used by manufacturing and which parts have been used to maintain the rental assets or service on sold equipment.
    They also want to automatically contact operators and client about upcoming service dates.
    My expertise is in SAP HR.  Which SAP modules would they need to accomplish this?  Is there another solution they should consider?

    They need to track:
    Customer information u2013 company name, contact person, start date, end date, sold or rental unit, service schedule on the three major components.
    SD Modules
    Equipment information u2013 where it is, which components it consists of, service records, forecast of service requirement, data on each specific component.
    PM Modules
    Job information u2013 field tickets, work orders, distance traveled for installations and service work, how long units have been running.
    PM Modules
    Revenue information u2013 all pertinent information as well as what was billed and when.
    SD Modules
    Inventory information u2013 all pertinent information as well as which parts have been used by manufacturing and which parts have been used to maintain the rental assets or service on sold equipment.
    MM Module
    They also want to automatically contact operators and client about upcoming service dates.
    CS Module

  • IPad 1- can I download pics directly from my Canon Sureshot and what accessories would I need

    I am leaving on vacation and plan to take lots of pictures on my Canon sure shot camera. Can I download directly from the camera to my IPad 1 and what accessory do I need to buy to connect the two devices?

    You need the Apple Camera Connection Kit: http://store.apple.com/us/product/MC531ZM/A

  • Can I run my 23" Cinema Display from a Windows PC? What adapters would I need and graphics card if any?

    I need to buy a Windows PC Notebook and want to make sure there are adapters or if necessary video cards for it to run my 23" Apple Cinema Display.
    (I'd prefer not having to get a separate monitor for the pc windows only jobs).
    If anyone else does this, how does it work out for you? Any tips?

    OOPs all. I looked at the other posts and see my answer.
    Thanks anyway.

Maybe you are looking for

  • Spoken work files will not play even after importing/converting?

    I have some audio files recorded on my Android phone with the basic recording app and the files play when I press the spacebar to preview them in Mavericks. However, after importing them into iTunes using various import settings, including the podcas

  • IPod touch 5th gen won't restore

    Hi Brief background: My sister got a new iPod touch 5th gen and decided to set a password on it, she then somehow managed to forget the password on the same day as she set it. So I looked online (including on here) and it seemed I could just 'restore

  • How do i Fresh intall?

    How do i intall a fresh copy os os X on my macbook im used to the install routine on windows xp, does it format on its own? is there a guide?

  • I restored my laptop to an ealier date and lost my private browsing capability

    My private browser selection on the tools dropdown is grayed out. Mozilla 3.6.10 was reloaded. It still does not work.

  • My macbook pro suddenly is in french

    When I use Preferences Systeme and select anglais and etats unis, the very top blue menu bar is still in French.  I can understand basic French so this unexpected switch isn't the end of the world, but why can't I switch everylthing back to good old