What Case are you using with FS7?

Any suggestions for a hard case that could hold camera, lens and evf?Thanks!

I just received my PXW-FS7K with the 28-135 kit lens on Jan 2 and now have it placed in this bag: http://cvp.com/index.php?t=product/sony_lcs-g1bp . I had done a lot of research and saw this bag on the introductory video for the FS7. I believe it is only available in Europe and don't know if it still manufactured.
I am able to fit a fully assembled FS7K with lens hood, the remote arm assembly and an AT835ST microphone into the bag. I do have the mic-holder mounted upside down (permanently) but this also protects the microphone in regular use. I also have a Sigma 18-35 lens with hood and case; the Sony LAEA4 adaptor for the Sigma lens; the FS7 Loupe placed in a pocket with drawstring and the new Sony on-camera light HVL_LBPC in a black pouch - this is all in the main compartment.
In 2 side compartments on both ends of the bag, I have 1-BPU90; 3-BPU60s; 2-BPU30's (for the HVL-LBPC light).
In front compartment BC-U1 battery charger and a Portabrace media pouch with 10 XQD 128 G series cards and misc. items in little compartments inside the front pouch.
There is still some spare room in the main compartment to fit a couple of small Prime lenses.
This bag is just under 10" high so it shouldn't present overhead bin problems except for the small commuter airlines.
Everything fits snugly but does not need to be forced to put it in the bag - I have turned the bag upside down and on either side and nothing moves.
I like the idea of pulling the camera out fully assembled, right side up and only having to attach the Loupe when needed.
The entire assembly weighs 30 pounds. I also got a Samsonite Luggage Compact Folding Cart to wheel it through airports. I have a couple of pics posted on the dvxuser forum : http://www.dvxuser.com/V6/showthread.php?331233-FS7-Bag-suggestion&p=1986508738&viewfull=1#post1986508738

Similar Messages

What browser are you using with OS 9.x?

Would you all please state which internet browser you are using with OS 9.x and the strengths/weaknesses you are experiencing with it?
I switch back and forth between Mozilla and Internet Explorer but fewer and fewer websites work properly with them. If there is a better browser than those two I would add it to my old Wallstreet running 0S 9.1.
Again, what browser are you using with OS 9.x and what are its good/bad points?
Thanks!
Message was edited by: Paul Stamser

(Almost forgot
I have an iCab filter set up for Yahoo on my OS 9.2.1 iMac.
For the URL string I use (asterisk)yahoo(asterisk)
For the Scripts filter I use the Netscape identity and have all versions checked except "JScript", and everything is checked in the "Allow" section.
For the Network filter I use the Firefox identity and have the HTTP "referer" set to "Always".
I don't use Yahoo Mail much on that machine, but those settings allow me to use the Address book to select addresses and send messages with attachments. (I'm not sure about viewing attachments, though, and I'm almost positive that address auto-complete doesn't work.)
Cheers,
K.S.
(I use iCab 3.0.5)
Message was edited by: K.S.

What holster/belt case are you using with the power slider??

Looking to buy a belt holster/case for the incase Power Slider...I heard that the holster for the TILT is big enough to hold the power slider...is this true? Does it fit? Thanks!!!

Check my sig..
Used to have an antec truepower 480... but the 12V rail wasn't living up to the hype. Went to OCZ's Powerstream 520 and now my puter's rock solid stable.

What LMS are you using with UPK?

I have been using UPK for about 2 years. I have been tasked with finding an LMS for our organization. If you are using an LMS, please let me know what you are using, what you like and don't like about it.

Hi
We are using Janison - LMS Vs 7.01
Its a bit clunky and visually not what you call cutting edge.
We have over 2.5k users in 13 different institutes who are all tested on the LMS and we use SCORM 1.2 to score a 80% pass.
No pass - no access.
Wouldnt recommend Janison but it may have been our initial setup of the file structure that is causing a lot of our problems and lack or reporting options.
Cheers
J.

What camcorder are you using with FCE that's compatible

I'd like to hear from folks so other folks know what's compatible and what is not. I know Apple has a list but it's outdated. old, and not comprehensive. By you stating what make & model your camcorder is and if it works with FCE will help a lot of folks.

Hi Sheila.
The Apple list causes more trouble than it is worth.
There are possibly thousands of cameras out there but testing is so time-consuming that Apple has only tested a handful - probably all those on the list!
I think you will find that (almost) every mini-DV camera in the world, equipped with FireWire, will work OK in FCE.
You probably stand a greater chance of being struck by lightning than of buying a new camera that will not work.
Having said that, some Canon owners have experienced problems - which have usually been curable.
If you buy from a local dealer you might be able to come to an agreement that you can return the camera in the highly unlikely case that it is not compatible with FCE.
I believe some dealers will let you borrow cameras for short evaluation periods. (I don't expect the large "box-shifters" will do this).
Ian.

What equipment are you using with GarageBand?

Just curious...:-)
iMac Intel Core Duo 2.0 GHz 20" Mac OS X (10.4.8)

(Almost forgot
I have an iCab filter set up for Yahoo on my OS 9.2.1 iMac.
For the URL string I use (asterisk)yahoo(asterisk)
For the Scripts filter I use the Netscape identity and have all versions checked except "JScript", and everything is checked in the "Allow" section.
For the Network filter I use the Firefox identity and have the HTTP "referer" set to "Always".
I don't use Yahoo Mail much on that machine, but those settings allow me to use the Address book to select addresses and send messages with attachments. (I'm not sure about viewing attachments, though, and I'm almost positive that address auto-complete doesn't work.)
Cheers,
K.S.
(I use iCab 3.0.5)
Message was edited by: K.S.

[Touch] What Case are you Usi

I recently purchased the 40GB touch and I love it. I was a little upset that there aren't any cases out there which let you maintain fuctioinality or even see the display but I figured I'd give the supplied case a go.
I quickly learned the value of the Lock switch after my carefully chosen selections were wiped out by the random button. Annoying but not deal breaking. 2 days into owning it and having filled the hard dri've, I'm wearing it on my belt. When I go to stand up, it falls off due to the poorly designed belt clip!! Now my $300 new toy is scratched and dented all along the top of the player :angry:
SO, I'm posting to ask what cases are you using to protect/transport your 40GB Touch? Any feedback would be greatly appreciated. Thanks.

Lack of case options was/is my frustration as well. I went this route for a case:
Click Here for post and link to picts

What launcher are you using?

What launcher are you using with your Z2?
I'm on Nova Launcher Prime with HERAcon theme and icons.

Apex Launcher

What Camera are you using?

Hi,
What camera are you using for you shot?Let share about the Semi Pro cam together: Fix Lens with manual Focus and Zoom,Affortable Price...

Well, before I got my Digital Rebel XT I dreamed of the Powershot S2 IS. Then the S3 came out...but I was hookoed on my Rebel XT. I hear the S5 is a monster...
Now, my 20D is probably more prosumer. I wouldn't call it a pro camera, although it is legendary for it's use on the sports areana and weddings by pros. For my money, any camera with a pop-up flash and automatic modes is not a pro camera. Having said that, I hope no one starts throwing eggs and tomatoes!
-Scott

What PSU are you using?

K8N Neo Platinum users (with stable systems!): what power supply are you using?
Please post its specs, namely the 12V rail.
Thanks!
EDIT: Users with a 6800 ESPECIALLY please post! =)

Quote
Mr Woo- I think the question we should all be asking is who is using a high end PSU (30ish 12v amps) and also getting stability problems.
sorry mr woo This thread has been set up by k3nt to acess a specific prob he's having.
Quote
what PSU are you using?
K8N Neo Platinum users (with stable systems!): what power supply are you using?
Please post its specs, namely the 12V rail.
Thanks!
EDIT: Users with a 6800 ESPECIALLY please post! =)
and
Quote
I might be having to replace my Antec Truepower 480. Apparently its 22A on 12V rail is questionable considering my system? See my specs below in sig.
I feel if the thread was as u suggested would just be a mirror of this one
Worst PSU that works on an A64-system?

What application are you using for student collaboration?

The only part that is missing from iTunes University is real time student collaboration. What application are you using to bridge the gap? Thanks, Ed

Yeah, I'm not sure I know what you mean either.
Q: If you're asking which server-side code to use on Windows IIs Servers?
A: ASP or ASP.net and MSSql. Since Microsoft built these languages, you would get the best support from MS Expression.
If you're asking for software that helps you write code, you'll need to be more specific about which code you want to write and for what purpose.
Nancy O.

What tools are being used with WLS 5.1?

I have been experimenting with WLS 5.1 and it is clear that there are many
steps in developing, testing, and deploying EJBs. What tools are being
used? How do IBM's Visual Age, JBuilder 4, and Visual Cafe EE stack up?
Are there any tools for developing and debugging JSPs?
Thanks,
Mike

Hi folks,
about the "IBM VisualAge 3.02 (Integration Kit)" that Nirav mentions below...
Does this integration kit work with Visual Age 3.5? If not, do you have any tool recommendations for VA3.5 users who are developing apps for WebLogic5.1?
Thanks,
Janet
Nirav Chanchani <[email protected]> wrote:
Mike,
The level of integration between WLS and the tools is as follows (with
VisualCafe being the most integrated) --
1. VisualCafe Enterprise (or the WebGain Studio suite)
http://www.webgain.com/Products/index.htm
2. JBuilder 4 http://www.inprise.com/jbuilder/
3. IBM VisualAge 3.02 (Integration Kit beta up on BEA website)
http://commerce.beasys.com/downloads/weblogic_server.jsp#wlstools
All the integration's support development, local debugging, and local
deployment, but VisualCafe has wizards and like which generate code for the
J2EE specs that WLS supports.
I have read that JBuilder 4 supports JSP debugging but have not tried it yet.
Nirav.
Mike DiChiappari wrote:
I have been experimenting with WLS 5.1 and it is clear that there are many
steps in developing, testing, and deploying EJBs. What tools are being
used? How do IBM's Visual Age, JBuilder 4, and Visual Cafe EE stack up?
Are there any tools for developing and debugging JSPs?
Thanks,
Mike--
Nirav Chanchani
BEA Systems, Inc.

What cases are you guys using?

my ipod touch is incased in,
http://www.walmart.com/catalog/product.do?product_id=8145073
and then carried around in,
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSL4IPH%2DH

I tried the typical hard case...but I too found that the fm transmitter I was using wouldn't click in while I was using it. For that matter the USB cable wouldn't fit either. Other wise I thought it would protect my ipod decently. (I was worried about little specks of dirt sneaking in and scratching, but I didn't keep it that long.
I used one of the rubber kind, but discarded it due to excessive bulk and it not being very pretty.
I have one of the skins on my 30 G 5th Gen iPod, but its more of a sticker than anything, and I was disappointed with the outcome. (Though it does look awesome!)
For the last 5 months or so I've been using this one: http://www.walmart.com/catalog/product.do?product_id=7983343 I love it! It looks nice, even though its a little bulky. I do have issues using it while I play some of the apps games since sometimes it wants to slide out.
I had thought for the longest time that I needed a screen protector, but with the case I'm using I don't really feel that is necessary. Since recieving my iPod in December I have not received a single scratch, so I don't see getting one anytime soon.

What protection do you use with VG224s?

We have many VG224s in production. Nearby lightning strikes kill ports on the VG224.
The cabling has protection on it - from the old Western Electric 701 PBX. However, that switch delivers 52 volts at 39 milliamps, and the Cisco VG224 is much lower.
The protection on the cable plant was designed for the Western Electric switch.
What is the best practice? When changing out PBXs for VGs, do we have to change out the protection, and if so, what is recommended?

Hello,
The VG224 is designed for on premises applications which is generally
for internal building use. If you are having issues with lightning strikes
blowing up the interfaces, then it appears that you are using the VG224 as an Off
Premises Extension with long/exposed cable runs which are susceptible to
picking up RFI and EMI. The VG224 was not designed to be used for OPX use and
we would not be recommending it in environments where cable runs are exposed to
lightning even with external protection.
Normally you would use an external line driver/isolator to drive the long
distances and provide isolation/protection. These are often called Long Loop
Adapters. Here is an example -
http://www.telcom-data.com/products/VIK-LLA-1.aspx
Our newer FXS modules support an "OPX lite' mode which drives longer distances
and has better protection -
http://www.cisco.com/en/US/solutions/collateral/ns340/ns517/ns477/ns296/application_note_c27_461821.html
Hope that helps!
Regards,
Karthik Sivaram

What armband are you using?

Looking for an armband to use that can accomodate receiver. Just wondering what armbands people were using.
I don't really like the nike armband.

Xtreme mac Sport Wrap http://www.xtrememac.com/cases/nano/sportwrap.php
It's comfortable on either wrist or arm & has a screen. (It has two straps in different sizes.)
I cut a small slit with a box cutter in bottom of the sport case to fit Nike+ sensor and put a hole for the earplug cord. The neoprene has not stretched or torn so it holds the Nano firmily in place (despite the slit--which looks like it was meant to be there--not jagged or rough).
I wear this on my wrist so that I can see the dial. No matter how much I perspire, the Nano does not get wet because it is not flat against my wrist. You couldn't pay me to use a screenless arm/wristband.

What Case are you using with FS7?

Similar Messages

Maybe you are looking for