What cause black screen down with forced turn off notice?
My mac book pro is just 4months old. I had some probelm and replaced logic boad a month ago.
But I suddenly experience that black screen going down with forced turn off notice.
I was so scared I will have a serious probelm again or not. Hence is there anyone when this sign shows?
And ther other issues, just checked console
Thus I checked console there is error apple: dock.agent KCGError IllegalArguement: CGSSet Window trasform at placment: singular matrix (please attach the file).
is there anyone who knows what causes this error and how I can fix it?
Thank you in advance.
Best wishes
Joon
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
my Iphone 5 has a black screen and won't turn off/on. It locked on my yesterday while in photos and then it went black.
Hard Reset: HOld the home button and the sleep/wake button of your iPhone for about 10 to 15 seconds at the same time. Holding down both buttons at the same time till you see the apple appear
-
I have a problem that my phone only vibrates but does NOT ring any more. No matter what I try to do with settings turning off "silent" or whatever nothing helps. Do I need to reset. what are the consequences of resetting?
What a numpty! Yes of course you're right.
Couldn't find the answer when searching the forum but then came accross this.
Next dumb question coming up! :-( -
What causes black screen in PSE 8 slideshow playback
When I preview slideshow I get black screen. Sound works great. What's happening?
Bonjour.
I have the same problem : Vista home premium Pack 2, Intel Core 2 Quad CPU, Q9400 @ 2.66 GHz, 2.67 Ghz, 4 Go, NVIDIA GeForce 9600 GT
I applied the solution proposed by:
http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#Slideshow_preview _doesnt_show_photos
This solution does not work.
Although I run PSE as administrator, I always have a black screen when I play my slideshow.
Can anyone give me a solution?
Thanks
The French OldPapy -
Black screen: need to restore: turn off iCloud
My screen on my ipad mini went black. (I tried the knee thing, and no luck for me...) I am now trying to restore it and I need to turn off iCloud. How can I do this with a black screen?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/http://www.apple.com/support/ipad/assistant/ipad/
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htmhttp://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274http://support.apple.com/kb/TS3274
Cheers, Tom -
What causes my screen on ipad to turn red?
What would cause my ipad screen to turn red?
The first thing I would do to try to end this behavior is reset the iPad. Hold the on/off and home buttons together for about 10 seconds till the Apple logo appears. Hopefully that will end the redness.
If not, the next step would be a restore. Plug your iPad into iTunes, let it sync, then press the "Restore" button on the right of the iTunes display. -
yesterday for the first time i turned on my macpro 2011 model and i got a crazy gray screen with lines all over it ,so i held down the power button and turn off then restarted and all was ok could someone help me with this,what caused this shut down. werd
Are the lines like psychedelic herringbone? If yes, I had that happen once, it was something serious, like the
Logic board. The good news is that it was fixed without any loss of data on the hard drive. Take it in to have Apple look at it ASAP. I took it to TekServe at the time, they are very nice about preserving your data and user library when possible.
Good luck and don't panic. -
My phone died last night and when I plugged it in it wouldn't turn on.I tried restarting it but it has yet to turn on since last night,It was just a black screen,i try the on/off and home buttons together but its not working,What should I do?
How long have you had your phone? Because if you've had it a long time, the battery in the phone might of died on you. Or have you dropped it in water, snow, from high up? All those things could of disconnected something internally in your phone, or permentaly damaged the internal hard drive its self, or the sims card.
-
BLACK SCREEN startup with 3 beeps, FREEZES when unplugged, Splash screen freeze, HEAT-UP TO BOOT
BLACK SCREEN startup with 3 beeps, FREEZES when power unplugged, IF IT BOOTS splash screen freezes, OVERHEATING REQUIRED TO BOOT - 0x7B, Event 41 kernel-powe
Issue: One day I unplug the power, the screen freezes and I get frozen music sound. I shut down, start up, I get 3 beeps (1 short 2 long), which indicates a Video failure according to the Thinkpad Laptop beep code list.
How I solve the issue day-to-day: I turn the heat up - I disconnect the battery and hard drive and plug in the power then turn it on. I will wait until the underneath is searing hot with a blanket blocking the fan's flow of air, I mean way hot because any cooler and it won't start. Plug stuff back in, Hard drive first, Battery second, turn off with power button hold, unplug power, replug power.
I turn it on, no beeps, it goes past the first Lenovo screen, then gives me a prompt because it "didn't shut down properly" and continue regular startup. What happens next is the Windows logo appears, and just as the animated windows logo starts to move (you see 2 small colored dots on the screen), it freezes. I see this every time, I know naturally that it means that the laptop is still too hot to go past that point, so I shut it down and try again. After about 5 - 10 tries it will go past the splash screen and into the login area, then it's all fine.
Sometimes when I unplug the power from the back by accident it will freeze. By accident I mean that the connector wiggles it's self out easily. This unplug freezing thing started happening about 1 week before the 3 beep black screen problem started rolling, so I'm putting 2 together.
Errors:
I got a Blue Screen of Death the first time I started it up with the overheating ritual, but I never got it since. It was 0X7B. I ended up changing a setting in BIOS from AHCI to Compatibility Mode, and I passed everything without the BSOD again. I have always had it on AHCI.
I got another Blue Screen of Death about a week ago, but came as it was on already and I had been using it, and said something about disabling Cache or Shadowing in BIOS. I never got it since.
BIOS:
Also, the time was set to 1988 or something in the BIOS.
Event Viewer events found:
1. Kernel-Power, Summary page.
There are critical events for a few things like Kernel-Power, Event ID 41, Task Category (63). There are 19 of them, each day 1 or 2 of them but mostly 1, so this maybe corresponds to my daily ritual.
"The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly."
2. Kernel-Processor-Power - Event ID 37, task category (7)
"The speed of processor 1 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report."
3. LMS - HCMI - Event ID 2, Task Category: none
"LMS Service cannot connect to HECI driver".
I came across a very sluggish performing control panel for Nvidia before and after this problem, and I tried installing a newer version, which I had to jump through a few hoops to do, like uninstalling first, not just updating. At first it said that the driver wasnt made for the system, or that it wasnt compatible or something, which was wrong. I made it work somehow, but it was still sluggish after install. I rolled it back to an earlier driver, and now it works fine oddly. No sluggish performance / slight freeze window thing going on. No problem at all.
MSCONFIG.exe, Boot Advanced Options: I have tried twice to change this 1 setting, check box "Number of processors" and change to 2 processors, because I do have 2 processors. I have been able to change this in the past, but it does not save the setting now, and I believe this option was selected before I started having problems, and settings did not disappear then.
What could this be. The small round BIOS battery? The video card like everyone presumes? (I.E. the entire motherboard replacement), Software? The wiggly power input area? (Not enough power getting in?), Firmware of some sort? The BIOS software being wrong?
SYSTEM INFO:
Thinkpad T61p 6457-A24, Intel core 2 duo (T7700) 2.4GHz, Intel 120GB SSD 6Gb/s, NVIDIA Quadro FX 570M (256 MB),
Windows 7 64 bit Home Premium (6.1, Build 7601), BIOS Ver 1.00PARTTBLx
Display: 1680 x 1050 (32 bit 60 Hz), Integrated RAMDAC, Main driver: nvd3dumx.dll,nvwgf2umx,nvwgf2,
Version 8.17.12.9688, Date 5/31/2012, DDI version 10, Driver model WDDM 1.1T61-Elwood wrote:
Laptops of all Brands using Nvidia GPUsmade from 2007-2008 are faulty.
You wont get good Nvidia ones on Ebay/forumes anywhere.
I'd beg to differ on both accounts.
*61 series nVidia-based ThinkPads from late January through July of 2008 are a 50/50 shot, since the old chips were mixed with the new ones. Any machine built in August and later can be deemed "safe".
As for the forums (I don't do feebay) there are people who sell genuine, properly-tested planars. However, these do not come at bargain basement prices, and with a good reason if I may add.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you. -
I was looking up a song on the internet, and my internet was being slow, so i was going to the settings to turn internet/wifi off so i could use data. When i did that the screen just went completely black. I didnt know what happened so i plugged it into a circuit into the wall to see if it needed charging. It made the buzz noise when i plugged it into the charger, and siri still works if you hold the home button down. I don't know what to do to get it to turn back on... If anyone knows what to do please help. thanks !
Hey there Maggie,
Welcome to Apple Support Communities.
The article linked below provides troubleshooting tips that can help you resolve the blank black screen issue with your iPhone 6 Plus.
Get help with the screen on your iPhone, iPad, or iPod touch - Apple Support
If you see a solid color screen (black, white or blue)
Plug in your device to a power source. If you see the low-battery screen when you plug in, let your device charge for at least 10 minutes (20 minutes for iPad) before using it.
Reset your device while it's plugged in.
If resetting doesn’t fix the issue, restore your device.
If you still see the issue after you restore, contact Apple Support.
Cheers,
-Jason -
Macbook only boots with black screen along with a load of jargon
--------------------------------------------------------------------------------
I installed a java and an intel secuirty update on my macbook pro after that i etsrated my mac and it was then taking ages to boot back up and then afte a while a black screen appeared with a load of jargon on which said the following
Launchd:com.apple.ni.blindd: Exited abnormally: Bad system call
Launchd:com.apple.ni.blindd: respawning too quickly! throttling
Launchd:com.apple.ni.blindd: 3 more failures without living at least 60 seconds will cause job removal
Launchd:com.apple.ni.blindd: will retart in 10 seconds
mDNSResponder-108.6 (Jul 19 2007 11:41.28)[153]: Starting
Launchd: com.apple mDNSResponder: exited abnormally: Bad system call
Launchd:com.apple.mDNSResponder:Launchd:com.apple. syslogd: exited abnormally: Bad system call
Launchd:com.apple.mDNSResponder: 2 more failures without living at least 60 seconds will cause job removal
Launchd:com.apple.mDNSResponder: will restart in 10 seconds
Launchd:com.apple.syslogd: exited abnormally: Bad system call
Launchd:com.apple.syslogd: respawning too quickly! throttling
Launchd:com.apple.syslogd: 2 more failures without living at least 60 seconds will cause job removal
Launchd:com.apple.syslogd: will; restart in 10 seconds
Launchd:com.apple.KernalEventAgent: exited abnormally: Bad system call
If anyone can make sense of this or has had happen before. any ideas on what it means and help on solving this problem
ThanksHi Spongeofthedead
did you get this problem solved, my macbook is doing exactly the same thing!!
all the disk repair etc does not seem to work..
i think i ve killed it any help would be very much appreciated..
cheers
gt -
My IPad2 has a black screen and won't turn on. It worked perfectly last night and it is completely black this morning. It is fully charged.
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Home button not working or unresponsive, fix
http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
Fixing an iPad Home Button
http://tinyurl.com/om6rd6u
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
today I get issues with my z10 device. When I in a phone call, the screen don’t auto turn off. There is no a screen protector on there and it seems that the built-in proximity sensor is not responding. I have to press the screen with my face accidently. can anyone help me with this?
Same issue already several weeks.
And we are not alone:
http://forums.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/i...
At all there is, I think, 4 threads in parallel about this issue at CB forums. One of the:
ms.crackberry.com/blackberry-z10-f254/proximity-sensors-still-not-working-my-z10-891783/index5.html
I already contacted BB Help at Twitter. Answer:
Thanks for the information. It seems that you have installed an OS version higher than the one supported by your carrier on your device. Please contact your carrier to get the supported OS version and try the proximity and light sensors. Let us know if you need further assistance. Cheers. ^LFC.
I did replay:
You are confused me. Phone got updates over network automatically. On crackberry forum a lot of people from different countries and with Different OS version, but with the same problem. Hi, this is thread at CrackBerry: http://forums.crackberry.com/blackberry-z10-f254/proximity-sensor-906493/index3.html
This my replay was 22 of march. No more answer from BB.
I can't contact my operator - 3UK, because I bought my from on Amazon from Amazon. This phone not from operator - seller is Amazon.
What I already done:
For last week, I read, how to install OS using Sachesi and Autoloader. I used Sachesi to load 3 UK version, I installed autoloader from this links:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
This
For Z10 models STL100-1, 2, -3, -4: Download 10.2.1.1925
Doesn't help
And this:
For Z10 models STL100-2, -3, -4: Download the 10.2.0.1803 OS
No result.
After install all of them phone wants to update to 10.2.1.2102 by air.
BBVE in all versions sais: Can not obtain data from sensors.
Dear BB support, please, can you explain, how to resolve this issue? -
my ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.plz help me.................thx u
Option 1
Try force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You need to be patient and repeat the above many times to recover your iPad -
PrE 12. How to deal with black screen "Created with Adobe Premiere Elements trial version"?
I'm really considering purchasing PrE 12 and would like to try it out. (I have another video editing software and would like to try this one.)
When I add video, I get a black screen "Created with Adobe Premiere Elements trial version". When I hit play, I can hear audio, but I don't get any video (just the black screen). Is there a work around, a setting that I can change, or is the trial version supposed to show the black screen?
Thanks,To help with troubleshooting, some questions so people have more to work with
More information needed for someone to help... please click below and provide the requested information
-Premiere Elements FAQ http://forums.adobe.com/thread/1042180
And, exactly what are you editing?
Codec & Format information, with 2 links inside to read
-read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
For Mac http://mediainspector.massanti.com/
Maybe you are looking for
-
Trifold brochure in Pages for iPad???
Hello, I'm trying to make a trifold brochure in the pages app for iPad. I thought a template would be available but I must have been mislead thinking that the app would be similar to pages for Mac. Does anyone know how to do this? i can't even figure
-
Issue on LOV with Transient VO
Hi Experts, I have droped my viewobject(EMP) as a creationform. In that form i have one attribute (job) as lov and I am getting the values of that lov from a procedure and inserting into a Transient VO in application mod class and I am executing the
-
Deployment is failing on creating web service proxy in portlet.
Hi All, I am using a JDeveloper 11.1.1.2.0. 1) I have created a application (portlet producer application), which contains few jsf pages (not jspx). 2) I have added a web service proxy ( using New>Business tier>Web services>web service proxy, provide
-
Aligning a text layer to the centre of the image?
Hi, I've just been creating a watermark for my photos in Photoshop CS5. I've found the 'Align' tool under 'Layer' in CS5 but align is greyed out. How can I align the text layer to the centre of the image if I can't use the align tool? Thank you! Chri
-
HT1349 I just got a new computer and I cant remember how to get all of my music back on itunes
I just got a new computer and I can't get my music back on itunes! Does anyone know how to restore music back to itunes?