What causes my HP 6500

My HP 6500 wireless printer goes to sleep between periods of use if not used within about 5 minutes or so of last use. The only way I can wake it up is totally unplug the power cord, reconnect and we are back in operation again for a period. If not used while correcting a composition and going to print again the printer is dead. The green power button is blinking, will not let me shut it off or do anything if blinking. How can I keep it active for longer period of time. The wireless connection is not lost during this time of use.

dontimm,
There could be a number of things causing this lets try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on narrowing troubleshooting considerably.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

What causes cellular data usage to decrease if last reset has not changed? I reset every pay period cuz I do not have unlimited and was showing 125 mb sent/1.2g received. Now showing 98mb sent/980mb received. Last reset still shows same

I reset my cellular data usage every month at the beginning of my billing period so that I can keep track of how much data I am using thru out the month. I do not have the unlimited data plan and have gone over a few times. It's usually the last couple days of my billing cycle and I am charged $10 for an extra gig which I barely use 10% of before my usage is restarted for new billing cycle. FYI, they do not carry the remainder of the unused gig that you purchase for $10 which I disagree with. But have accepted. Lol Moving on.
I have two questions. One possibly being answered by the other. 1. Is cellular data used when I sync to iTunes on my home computer to load songs onto my iPhone from my iTunes library(songs that already exist)? 2. What causes the cellular data usage readings in iPhone settings/general/usage/cellular usage to decrease if my last reset has not changed? It is close to end of my billing cycle and I have been keeping close eye. Earlier today it read around 180mb sent/1.2gb received. Now it reads 90mb sent/980 mb recieved. My last reset date reads the same as before. I don't know if my sync and music management had anything to do with the decrease but i didn't notice the decrease until after I had connected to iTunes and loaded music. I should also mention that a 700mb app automatically loaded itself to my phone during the sync process. Is cellular data used at all during any kind of sync /iPhone/iTunes management? Is the cellular data usage reading under iPhone settings a reliable source to keep track of monthly data usage? Guess turned out to be more than two questions but all related. Thanks in advance for any help you can offer me. It is information I find valuable. Sorry for the book long question.

Is cellular data used at all during any kind of sync /iPhone/iTunes management? Is the cellular data usage reading under iPhone settings a reliable source to keep track of monthly data usage?
1) No.
2) It does provide an estimated usage, but it's not accurate. For accurate determination, you should check the remaining/used MBs from the carrier (most of the carriers provide this service for free).

What causes this message "Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7"?

What causes error code: U44M1P7? I have rebooted my machine multiple times and continue to get the same results.

Photoshop: Basic Troubleshooting steps to fix most issues
ISSUE: Installation failed. Error Code: U44M1P7, U44M2P7, U44M1P6
SOLUTION: Run the installer. Reinstall Photoshop CS6 to repair/replace the missing/modified file. Select Help>Updates… to run the updater again. http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

What causes a slow mouse/cursor response on a fast machine?

I have a system that has always displayed poor cursor redraw performance with certain adobe applications. All rendering and other effects are fast, but basic mouse selections and button knobs are extremely unresponsive. I have searched and searched and can not seem to find out what causes the mouse cursor speed issues. Does anyone have any ideas as to why my mouse would slow for such basic Interface interactions? Do I need to change my hardware, settings, displays, BIOS, etc?
Any insight into what the mouse redraw/refresh is called in terms of computing would help me search for a solution. And if you have a solution as to why my mouse cursor acts drunk and sluggish when interacting with the Adobe UI's in premiere and after effects and sometimes Photoshop I would greatly appreciate the help.
Thank You. I attached a screen shot of a very basic selection interaction that is dog slow. The selection box redraws like there is a lag in some process associated with the square box overlay.
Computer Specs
Windows 7 64
ASUS Z9PE-d8
dual xeon
64 gig ram
quadro 5000 (driving two 30 inch dell monitors of different models One DVI-D and the other Display Port)
512 SSD main drive with windows Swap on 10k Raptor drive.
*All have been updated and the issue remains for over a year and a half.
Thank you so much.
Cliff

Your answer is in this part of your specs:
> (driving two 30 inch dell monitors)
It takes a long time to draw and redraw the pixels to the screen(s) with such large monitors.
We can mitigate this by making some changes in how our UI is drawn to the screen, and such changes are a rather high priority for use to work on for the near future.

HT201335 What causes the TV screen to freeze but sound continue on TV when using Air Play from I Phone?

What causes TV screen to freeze but sound continue on TV when using Air Play from I Phone 4?

First try rebooting ATV and router. Beyond that, it's probably something within the network, typically interference.
To get a report of the network go to istumbler (Mac) or netstumbler (PC). Look for signal strength and noise.
If on wifi try ethernet.

What causes "Timed out server" in WL Cluster and a question about session in WL Cluster

          Hi.
          We are using Weblogic 5.1 with SP 8. We have been encountering a problem in our
          clustered environment. We setup our (clustered)environment to have 3 instances(WL1,
          WL2, WL3) of weblogic running in one box. When one instance, let say WL1, responds
          to a request(1st request for a session), the session is binded to that instance
          till the session is terminated/expired. Which means succeeding request for that
          session can only be served by WL1(we tried stopping WL1 but WL2 and WL3 wont accept
          the request--which only causes the page to time out). Shouldnt it behave in such
          a way that other instances can get serve the request(failover)?
          Also, occasionally we encounter "Time out server" in one of the instance of WL.
          When this happens, that instance no longer takes in requests. Would anyone know
          what causes "Time out server"? Does it only happen in clustered environment?
          Need some help ASAP.
          Tnx in adv.


          What do you have in front of WebLogic for Load Balancing?
          What are the IP addresses/hostnames of your three instances? What hostname are
          you using in your http requests? Is your DNS configured to do failover?
          Make sure that you have session replication turned on. See the edocs.bea.com.
          Mike Reiche
          "clstrproblem" <[email protected]> wrote:
          >
          >Hi.
          >
          >We are using Weblogic 5.1 with SP 8. We have been encountering a problem
          >in our
          >clustered environment. We setup our (clustered)environment to have 3
          >instances(WL1,
          >WL2, WL3) of weblogic running in one box. When one instance, let say
          >WL1, responds
          >to a request(1st request for a session), the session is binded to that
          >instance
          >till the session is terminated/expired. Which means succeeding request
          >for that
          >session can only be served by WL1(we tried stopping WL1 but WL2 and WL3
          >wont accept
          >the request--which only causes the page to time out). Shouldnt it behave
          >in such
          >a way that other instances can get serve the request(failover)?
          >
          >Also, occasionally we encounter "Time out server" in one of the instance
          >of WL.
          >When this happens, that instance no longer takes in requests. Would anyone
          >know
          >what causes "Time out server"? Does it only happen in clustered environment?
          >
          >
          >Need some help ASAP.
          >
          >Tnx in adv.
          >
          >
          >
          >
          >
          >
          >

What caused the iBook problem?

I'm writing this for my wife, as she's unable to use her iBook for more than a few minutes before it locks up.
I'm serving in the military overseas. My wife and I both use Apple products to chat, email, etc. When I spoke to her yesterday, she was frantic. Her iBook G4 apparently started making a strange noise and then stopped working altogether.
I asked her what she had tried, and she explained that she spent over an hour on the phone with Apple support (I knew AppleCare might come in handy). The first support person she spoke with was, for lack of a better term, an idiot. This was confirmed by the third support person she spoke with. I'll explain later.
The problem was that when she tapped her spacebar to wake up the computer, it didn't wake up completely. She got a grey screen, Apple logo, and that was it. I told her to be patient, that maybe it was reseting after an update (that was before I knew about the 10.4.6 update being available).
Her computer auto-updates every Monday.
I had her turn off the computer by holding down the power button. I then had her disconnect the power cord and remove the battery. I did this on a hunch (just in case the computer had a heat problem). She reconnected the power cord, pressed the power button, and it was back up and running - for about 5 minutes.
Then the computer began making a not-so-funny noise again, and the spinning-beach-ball-of-death reared it's ugly head and wouldn't go away.
The first support person had her use the install/boot disk that came with the computer. That was Panther. We're using Tiger. Bad idea.
When the boot/install disk did not appear to be working, the first support person had her abort, and she was prompted with little phrases like "are you sure you want to quit, doing so now may damage your files" or something like that.
He just had her keep clicking "OK" and eventually got tired of talking to her and told her the hard drive was bad and that she was SOL.
The second support person was apparently too busy to troubleshoot any further and cut directly to "sorry, you're SOL".
The third support person was a little more helpful in that he talked her through connecting the iBook to her G5 PowerPC iMac to attempt pulling the files over to the iMac (she had already resigned herself to the fact that the iBook hard drive was on it's last leg).
She had asked the first support person about doing this and he said that if the files were corrupt on the iBook, they might corrupt the iMac, and that it was a bad idea. Not a very bright guy, considering the files would be copied to a folder, and wouldn't overwrite the iMac's system files.
She started to transfer files and the iBook froze again. She repeated the steps I had her do earlier, managed to get a CD in the the drive, copied a few folder successfully to the CD, checked the CD to see if the files were there (success!) but then the iBook died before she could get the CD out. She's working on holding down the track pad button while rebooting to see if it'll spit out the CD as I type this.
So, in addition to wanting to know how to resolve the problem, I'd like to know what caused it.
What caused so many people to have alleged hard-drive problems within a day or two of each other?
Is this Apple's first virus?
Is this the work of a disgruntled Apple employee working in the updates department?
Is this an evil Apple plot to force us to by MacBook Pro's that won't run Virtual PC?
Will running the 10.4.6 hurt or help the situation?
Why is there such inconsistency in Apple support and aren't they supposed to log their trouble-shooting steps performed thus far?
My wife has been using Mac's for over 9 years. I've only been using them for 2 years. Up until now, I've had a lot of confidence in Apple to be a solid platform, even if not the fastest platform. This experience is not inspiring me to purchase another Apple computer.
PowerBook G4 1.5Ghz 15 Mac OS X (10.4.6) iBook G4 1.2Ghz 14, iSight, 23" HD Cinema Display, LaCie d2, iLap, nano, Airport Express

Hi Robk64,
You might want to look at...
Knowledge Base Document #106214 on Troubleshooting Startup Issues
Knowledge Base Document #58583 on How to use FireWire target disk mode
Knowledge Base Document #106941 on Mac OS X: How to back up and restore your files
Do you have the Tiger Install Disc?
SOL?
Her files probably won't fit on a CD; unless she has less then 700Mb.
1."Is this Apple's first virus?"
Negative
2. "Is this the work of a disgruntled Apple employee working in the updates department?"
No, I don't think so. Apple tries these out to try and avoid problems with their updates. Things happen that are not expected. They wouldn't put anything out unless they thought it was ready.
3. "Is this an evil Apple plot to force us to by MacBook Pro's that won't run Virtual PC?"
First off, look at #1 and think about what platform is notorious for virus problems (Mac has had not had any virus out breaks so far). There have been some "malware/macro" software that was meant to mess with Apple Computers. The most recent that was was over exaggerated was nothing special; MacWorld worked pretty hard to get it to effect their machine. As long as you know what you are downloading and where you are getting it from, you should have no problem.
If you want VPC to work on a MacBook Pro; don't look to Apple. You should talk to Microsoft's Mac Department because Apple announced the Universal Binary switch a long time ago (with developer help) so that software companies could make the switch easier. If anyone is to blame; its Microsoft [they are busy working out their problems with Vista; I am guessing it will be awhile before you see VPC for MBP;) ]
"Will running the 10.4.6 hurt or help the situation?"
My opinion would to just reinstall Mac OS X after backing up the hard drive. That would probably fix your problem. Once OS X is installed; update the software.
"Why is there such inconsistency in Apple support and aren't they supposed to log their trouble-shooting steps performed thus far"
Once in a while Apple's personnel may make human errors. The second one you talked to may have seen her work-up and just reiterated what was said. They have resources we don't, but they can't really go beyond them because they can't see the product, and they are just call support. You may have to send it in.
So in 9 years, you have had this one problem. We can't really tell you what is wrong with the computer because we can't see it ourselves; we can only give suggestions/ideas. Tell them her story, explaining her situation (military etc) and then see if they can help. She may want to bring it into her local Apple Store/Reseller. She can make a reservation on the website or at the store. She can get better feedback in person.
Just some of my thoughts,
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

What causes the Missing or invalid version of SQL library PSORA (200,0)?

What causes the Missing or invalid version of SQL library PSORA (200,0) in PeopleTools 8.51 Application Designer?

Could be several things. Bad path, bad version, etc. give us details on your client install. What Oracle client do you have installed. App Designer is 32 bit. If you installed the 64 bit client you might get this error. What OS are you using. PeopleTools version? guessing 8.51 from your other post.

What causes BUFFER GETS and PHYSICAL READS in INSERT operation to be high?

Hi All,
Am performing a huge number of INSERTs to a newly installed Oracle XE 10.2.0.1.0 on Windows. There is no SELECT statement running, but just INSERTs one after the other of 550,000 in count. When I monitor the SESSION I/O from Home > Administration > Database Monitor > Sessions, I see the following stats:
BUFFER GETS = 1,550,560
CONSISTENT GETS = 512,036
PHYSICAL READS = 3,834
BLOCK CHANGES = 1,034,232
The presence of 2 stats confuses. Though the operation is just INSERT in database for this session, why should there be BUFFER GETS of this magnitude and why should there by PHYSICAL READS. Aren't these parameters for read operations? The BLOCK CHANGES value is clear as there are huge writes and the writes change these many blocks. Can any kind soul explain me what causes there parameters to show high value?
The total columns in the display table are as follows (from the link mentioned above)
1. Status
2. SID
3. Database Users
4. Command
5. Time
6. Block Gets
7. Consistent Gets
8. Physical Reads
9. Block Changes
10. Consistent Changes
What does CONSISTENT GETS and CONSISTENT CHANGES mean in a typical INSERT operation? And does someone know which all tables are involved in getting these values?
Thank,
...

Flake wrote:
Hans, gracias.
The table just have 2 columns, both of which are varchar2 (500). No constraints, no indexes, neither foreign key references are in place. The total size of RAM in system is 1GB, and yes, there are other GUI's going on like Firefox browser, notepad and command terminals.
But, what does these other applications have to do with Oracle BUFFER GETS, PHYSICAL READS etc.? Awaiting your reply.Total RAM is 1GB. If you let XE decide how much RAM is to be allocated to buffers, on startup that needs to be shared with any/all other applications. Let's say that leaves us with, say 400M for the SGA + PGA.
PGA is used for internal stuff, such as sorting, which is also used in determing the layout of secondary facets such as indexes and uniqueness. Total PGA usage varies in size based on the number of connections and required operations.
And then there's the SGA. That needs to cover the space requirement for the data dictionary, any/all stored procedures and SQL statements being run, user security and so on. As well as the buffer blocks which represent the tablespace of the database. Since it is rare that the entire tablespace will fit into memory, stuff needs to be swapped in and out.
So - put too much space pressure on the poor operating system before starting the database, and the SGA may be squeezed. Put that space pressure on the system and you may enbd up with swapping or paging.
This is one of the reasons Oracle professionals will argue for dedicated machines to handle Oracle software.

What causes areas to be grayed out when viewing in Acrobat 9?

What causes text to be grayed out when viewing in Acrobat 9?
Douments which were fine in Acrobat 9 suddenly have areas blacked or grayed out. The same thing happens if opened in Acrobet Reader. Is there a setting that causes this.

It could be that the text is an image.
Try going to Edit>Preferences>Page display>Page content and information and check the box hat says "Display large images".

What causes my iphone 5s to keep on running out of memory with any new download. I recently updated to ios 8.2

What causes my iphone 5s to keep on running out of memory without any new download. I recently updated to ios 8.2

I meant to say without downloading or receiving anything

Mac randomly crashes, screen turns green and white, and it works fine upon restart. What causes this and how can I fix it?

My MacBook Pro 13 inch (I've had it for about a year and a half) has started crashing randomly. It happens about once a week and it will happen when I'm in the middle of either watching a video, typing a paper, playing a game, etc. The computer clicks loudly and the screen becomes a series of green and white lines. It works fine upon restart, but it's still annoying whenever it happens. What causes this? Is it fixable?

The image suggests an issue with the graphics board.
The issue may happen more when your machine is generating additional heat, as when you're watching or processing video, or gaming. I can't say for certain, of course, but certain things will reduce the chance of the problem recurring:
1. Keep your machine as cool as possible. When there's additional heat, turn up the fan, or use an app like HD Fan Control to reduce the heat. Use your computer the way you see fit, but be conscious of heat.
2. Back up on a regular basis. Logic board problems can lead to more serious issues down the line, so backing up is a good way of safeguarding your data.
3. Look up "Logic Board Woes" on Google for a comprehensive discussion of the issue.

I get an error message " cannot connect to iTunes " on my iPad, what causes that?

I get an error message on my iPad "Cannot connect to iTunes store" when I try to connect for updates. Any idea what is causing that?

No idea what causes it, but it does happen. Try this.....
Go to Settings>General>Date and Time>Set Automatically>Off. Set the date one year ahead. Try to update the apps again. If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to update the apps again.
Or this ....
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to update again.

What causes pillarboxing to occur part way through a movie?

On very few occasions, my canon optura generated video when being imported to iMovie will have a series of clips, pillarbox. The overwhelming majority of all my movies and their clips never pillarbox. I have the camera defaulting to 16:9 and iMovie import preferences set to widescreen.
I might on occasion have been trying different camera modes/actions during a vacation, etc. and somehow get out of 16:9 or ?????????
Main question is what causes pillarboxing in the first place and from there perhaps I can figure out what I have done to trigger it.
Thanks

Uncheck "iMovie HD/Preferences.../Import/Automatic DV Pillarboxing & Letterboxing".
Check these out from Matti Haveri:
http://www.sjoki.uta.fi/~shmhav/iMovieHD_6bugs.html#widescreen
http://www.sjoki.uta.fi/~shmhav/iMovieHD_6_bugs.html#pillar_letterboxingpref
Sue

What causes ipod to go into disk mode

I have an older ipod nano and out of the blue for no reason the other day when i picked it up it said something about how i needed to use itunes to restore. When i plug the ipod into itunes in says something about corrupted files and the ipod needs to be restored to factory settings. Now, i have read a lot about ways to try to salvage this but resetting etc. and when i do this i get a check mark that says "okay to disconnect" and above it it says "disk mode" But what causes this in the first place? I never plugged it into a computer and ejected it improperly. One day it works fine and the next it doesnt and im going to have to lose all my music because of it! So again, what exactly causes this to happen? Is it something i may have done or just a flaw in the device?
Thanks,
Bryan

Yeah, I've had this happen to me too. Unfortuantely its just one f the many joys of owning an ipod/apple product. I'm not exatcly sure WHAT causes this to happen, but if you hold down the center and menu button down at the same time, the disk mode screen should turn off; and, depending if your ipod is charge or not, pressing the play/pause button should turn on your ipod on normaly. Hope this helped for being so late.

What causes my HP 6500

Similar Messages

Maybe you are looking for